Attaching USB thumb drive to x10 - XPERIA X10 Q&A, Help & Troubleshooting

Has anyone bought a micro-usb to usb adaptor (female) and attached a usb thumb drive or similar to the x10?
Does anyone know if it works?
I have just purchased one from ebay and I am awaiting its arrival in a couple of weeks. I am keen to try it and see if my phone will recognise it using Astro.
Will it break my phone?

armstrong12 said:
Has anyone bought a micro-usb to usb adaptor (female) and attached a usb thumb drive or similar to the x10?
Does anyone know if it works?
I have just purchased one from ebay and I am awaiting its arrival in a couple of weeks. I am keen to try it and see if my phone will recognise it using Astro.
Will it break my phone?
Click to expand...
Click to collapse
Sorry USB OTG is not supported on X10 and there's no hack available for it to work as of yet

THeLogiC said:
Sorry USB OTG is not supported on X10 and there's no hack available for it to work as of yet
Click to expand...
Click to collapse
Guess what?
You're absolutely right. It does not work. Not on the miui 2.3.2 cobrato anyway.
Cheers.

Related

usb host

who can test “usb host”
you ?
ok, I give up .. was that a trick question ?
mizhi said:
who can test “usb host”
Click to expand...
Click to collapse
No, it doesn't act as a host. I tried to read a USB 4GB memory stick without sucess
Tomo said:
No, it doesn't act as a host. I tried to read a USB 4GB memory stick without sucess
Click to expand...
Click to collapse
thank you
,i know
Hi all,
See my thread here post 2 has USB Host drivers, however they are untested on Rhodium so far.
Cheers,
Beasty
beast0898 said:
Hi all,
See my thread here post 2 has USB Host drivers, however they are untested on Rhodium so far.
Cheers,
Beasty
Click to expand...
Click to collapse
Thanks but it doesn't seem to work for USB Memory stick, I'll try the keyboard tomorrow
Tomo said:
Thanks but it doesn't seem to work for USB Memory stick, I'll try the keyboard tomorrow
Click to expand...
Click to collapse
What cable are you using to test USB Drive with TP2? I was hoping for the same sort of USB cable as the athena allowing you to plug usb devices into TP2 and use the TP2 as a host.
Thanks, Andy
andylivz said:
What cable are you using to test USB Drive with TP2? I was hoping for the same sort of USB cable as the athena allowing you to plug usb devices into TP2 and use the TP2 as a host.
Thanks, Andy
Click to expand...
Click to collapse
Me too, I was using a USB Keyboard an 19" monitor with Remote Desktop.
I bought a USB Mini to USB female connector here: http://www.yourcablestore.com/Adapters_c_40.html
Tomo said:
Thanks but it doesn't seem to work for USB Memory stick, I'll try the keyboard tomorrow
Click to expand...
Click to collapse
Nope, the keyboard doesn't work either

[Q] usb host on Flyer?

Hi,
Can anyone tell me if there should be any technical reason why the Flyer cant run on Honeycombe 3.1 and implement the usb host update so I can download jpegs from my dslr using usb.
Many thanks.
It might be worth trying it without honeycomb, I believe that Qualcomm chips have supported USB host since Eclair, perhaps HTC enabled it already?
Has anyone tried it yet?
I'd like to read some gps data from a SD card.
Thanks guys but needed a tablet asap which would also allow me to transfer files from my dslr via usb. Its been confirmed on other forums that the 3.1 update from Motorola will enable this so went with the Zoom
If you just need it for the DSLR have you considered an EyeFI card? For less than $100 you can get a direct connection from the camera to the tablet (or phone).
Dolmangar said:
If you just need it for the DSLR have you considered an EyeFI card? For less than $100 you can get a direct connection from the camera to the tablet (or phone).
Click to expand...
Click to collapse
I know, its a great solution but my D700 only uses CF cards which aren't currently supported.
anpictum said:
I know, its a great solution but my D700 only uses CF cards which aren't currently supported.
Click to expand...
Click to collapse
Yeah I have a D70 that's not supported either. I haven't gone and gotten one for my D60 yet although I've considered it a few times.
USB-host on Flyer
hi guys!
any news on this topic?
as there is already tmp root achieved and permanent root on s-off flyers, has anybody already tried to implement usb host functionality now?
I believe to have heard, that Honeycomb should support USB-host functionality automatically... Do we need to wait for 3.2, or could we get it earlier?
I'd really appreciate this (as I am also owning a DSLR from Canon), and would be willing to donate.
greets, alf.
Sure that the Flyer has the necessary chipset to work as a USB host?
Sent from HTC Flyer using Tapatalk
I'm actually working on a direct DSLR app using USB host, a preview of which should hopefully be released by the end of the week (alpha, not beta).
I'm mentioning this because it works on the Galaxy S2 with 2.3.4. I've not been able to get it to work on the Galaxy S1 with 2.3.4, but it just goes to show, it may not be 100% necessary to be running HC 3.1 to support it (as evidenced by the SGS2).
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
Either way, the chips themselves have supported it for years and years, that's not the issue. Kernel and framework support and such is the problem.
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
alf261173 said:
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
Click to expand...
Click to collapse
Test with a card reader or ext hd (powered) plugged to your cable and see if you get a new drive through a file explorer... The kernel will definitely need to support this functionality, or the fstab may need to be modified.
alf261173 said:
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
Click to expand...
Click to collapse
Indeed if you have a micro usb cable already, connect a usb stick, see if anything happens... that should tell you straight up.
of course I already tried different devices (USB-stick, hard drive, camera directly...), but there was absolutely no reaction ...
simply plugging it in doesn't work.
greets
Then it's probably lacking kernel and/or framework support.
is there a way to fix this with root?
any news on this matter?
Chainfire said:
Then it's probably lacking kernel and/or framework support.
Click to expand...
Click to collapse
Hi Chainfire,
have you looked into the Archos Gen8 range of tablets for any kernel info?
They utilise Froyo and have had USB host since day one. Maybe you could patch something from there?
H.
And what about porting the results for the SGT described here? http://www.xda-developers.com/andro...e-versatile-thanks-to-usb-host-functionality/
I can't wait. A Flyer with notes, the pen and USB host would be an fantastic tool for photography AND for any kind of fieldwork.
If you can take a photo with a proper camera and then check it on a flyer awesome display and use the pen... just imagine!
Sometimes I'm afraid that HTC did not bet enough hard for a fantastic device!

[Q] SGS II cant read usb otg...

hi guys...i ve got the SGS2 rooted with custom rom...angelom 1.7 but cant read usb otg....any solution..???
manouvras said:
hi guys...i ve got the SGS2 rooted with custom rom...angelom 1.7 but cant read usb otg....any solution..???
Click to expand...
Click to collapse
Did it work before you flashed angelrom?
i didnt try it before my friend....today i bought the converter from micro usb to usb......so...is there any service that maybe did not is enable in the custom rom....and cant run the usb host....
It's unlikely that it's the ROM, as this is a feature that many people use.
It may be that what you are trying to use simply doesn't work. Do you have a USB mouse you could try? Also, is the device that you are connecting powered, or does it expect power from the USB connection?
well...i connect 3 devices... a keyboard...a mouse...and a usb strage stick....
and no led...power on...of the devices
In that case, I suggest you ask on the thread where you got the ROM. Have you already searched that thread to see if anyone else has the same problem?
i did a quick search...but i didnt find anything important...well ok my friend thx....
manouvras said:
i didnt try it before my friend....today i bought the converter from micro usb to usb......so...is there any service that maybe did not is enable in the custom rom....and cant run the usb host....
Click to expand...
Click to collapse
don't bother checking with more devices or posting in the rom thread, you just bought the wrong cable for otg purposes.
a simple converter from micro usb to usb won't do, the sgs2 discovers connected devices by the resistor between pin 4 and 5 of the micro usb plug inserted, and afaik, a usb otg cable needs a 200k resistor (if you decide to weld one in yourself, double check the number against other threads, i am not sure about that). simple converters, adapters and even some "usb otg" marked cables don't have a resistor in there.
and if the correct resistor is present in the plug, the device should discover the cable when plugged in, and then you can connect any device afterwards and get another notification. (as is seen in the usb otg video in the accessories section.)
i hope you did not pay too much on that cable, or have the possibility to return it for a refund or exchange, because yours has little to no known uses.
Thanks Chef, I didn't know that. That's the "something new" that I learnt today
thx my friend..i give 4 euro for this ****...but its ok....
i m gonna buy....this one of nokia cable....its ok i thing right... ??? http://europe.nokia.com/find-produc...cables/nokia-adapter-cable-for-usb-otg-ca-157

[Q] HDMI

Hi all, naybody knows if is possible to enable as HDMI our USB port? Maybe for a custom ROM...
Don't think it's possible due to hardware limitations I'm afraid.
buy a livedock
neofactor.is3 said:
buy a livedock
Click to expand...
Click to collapse
Doesn't have HDMI-out I'm afraid. Lets you connect USB devices to the phone, but the HDMI-out is from the phone itself - which the Ray doesn't have. Only way I can think would be to sell it on and buy an Arc or similar.
I have a related question - has anyone ever used the DLNA options for streaming video from the phone? Does it do pictures too?
I just got my Xp Ray yesterday and haven't had time to back-up my current phone and move everything to it. I also need to root and partition a microsd card, too. But I'm looking forward to using it soon - it's a very elegant phone. (Got the gold.)
Terry
do someone know where to buy the livedock in Perth?
xutienan9520 said:
do someone know where to buy the livedock in Perth?
Click to expand...
Click to collapse
I've found it on ebay, shipped from England to Italy, I think it's available for aussie too ^^
LordSnow said:
I've found it on ebay, shipped from England to Italy, I think it's available for aussie too ^^
Click to expand...
Click to collapse
The only utility of the livedock is the possibility to keep in charge the phone while other usb devices are connected, cause it already handles the usb devices (I connect an usb dock with mouse and keyboard on it without problems, but I can't charge it at the same time^^)
does anyone know whether the xperia ray supports MHL?
LordSnow said:
I've found it on ebay, shipped from England to Italy, I think it's available for aussie too ^^
Click to expand...
Click to collapse
Could you give me the website please, i can't found it, it always shows "live rock".
thanks!
Look 4 "sony ericsson livedock" there are 4 results
got it, thanks!

[Q] USB mouse?

Anyone got a USB mouse to work on their G9?
edit: from the 3g port, like this guy http://www.youtube.com/watch?v=Y7H-EupM9g4
I dont want it bad enough to buy an adapter '
edit 2: someone said probably need a usb hub to translate usb 1.1/2.0
I can't get it to work through the back USB port either. Archos themselves say you need a micro USB to USB host cable, I ordered one today so I can test later.
Don't worry. Spend a dollar and buy OTG USB adpter. And your device will looks sexy not inside but and outside.
Mavamaarten said:
I can't get it to work through the back USB port either. Archos themselves say you need a micro USB to USB host cable, I ordered one today so I can test later.
Click to expand...
Click to collapse
look at the youtube video i posted like i said i think you need a usb hub
Shano56 said:
Anyone got a USB mouse to work on their G9?
edit: from the 3g port, like this guy http://www.youtube.com/watch?v=Y7H-EupM9g4
I dont want it bad enough to buy an adapter '
edit 2: someone said probably need a usb hub to translate usb 1.1/2.0
Click to expand...
Click to collapse
Yes, on my 80 G9 turbo hdd, I use the previous model of this: keyboard and mouse touchpad.
With this. Works like a charm.
Shano56 said:
Anyone got a USB mouse to work on their G9?
edit: from the 3g port, like this guy http://www.youtube.com/watch?v=Y7H-EupM9g4
I dont want it bad enough to buy an adapter '
edit 2: someone said probably need a usb hub to translate usb 1.1/2.0
Click to expand...
Click to collapse
The 3G USB host port needs definitely a hub to handle USB1.1 devices.
The OTG USB port is able to work with either with USB1.1 and USB2.0, but is restricted to work with HID and mass storage devices, due to software restriction.
AFAIK there's no general device support on the OTG port.
Correct me if i'm wrong...
Regards,
scholbert
It works for me without a hub
Sent from my U20i using XDA
Shano56 said:
look at the youtube video i posted like i said i think you need a usb hub
Click to expand...
Click to collapse
The video is private, and it doesn't work with a hub either, I've just tried.
BubblizZ said:
It works for me without a hub
Sent from my U20i using XDA
Click to expand...
Click to collapse
In the 3g port? Maybe you have a USB 2.0 mouse
Shano56 said:
In the 3g port? Maybe you have a USB 2.0 mouse
Click to expand...
Click to collapse
Idk I have an asus mouse. Sometimes I have to reboot so it can work.
Sent from my U20i using XDA

Categories

Resources