Hello..
I had a new Note I717 and rooted it. The new ICS would work fine initially but then gradually a program or 2 or 3 or 4 ... would start crashing/not open/Phone freezing. So I tried a new ICS and after initially working fine, the same thing would happen. After this happening with 3 different ICS ROMS that were supposedly stable, I decided to go back to my original saved ROM on CWM and Gingerbread and have a working phone.. then that started the same thing happening to where I cant even open settings as that crashes upon opening.
I am thinking it must be some underlying code that has been corrupted. I am conscious to wipe both cache including the davlik cache and previous version before installing anything yet this keeps happening.
Any suggestions?
Reflash your rom but before you flash it. Wipe data, wipe cache, wipe dalvik cache and also format system. It's under mount and storage in recovery. When you have done that flash your rom.
When you're booted if you use any app like titanium backup, just restore the app ONLY NO DATA.
This has worked for me maybe it will for you
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Related
Im running cm9 nightlies and recently i tried installing a theme. I got stuck with a boot loop and eventually fixed it.
But what i noticed is that my market was missing. So i tried installing a modified market. but that failed. Then i tried reinstalling gapps thru cwm but still no luck. The market still crashes.
Does anyone have any suggestions?
go to settings , apps, play store, clear updates and data .. try again.
Sent from my GT-I9100 using XDA
Ive tried that last night but still doesnt work.
rawr.itservin said:
Ive tried that last night but still doesnt work.
Click to expand...
Click to collapse
Try reflashing but follow these steps:
wipe cache & dalvik cache.
/format system
/format emmc
Then reflash ROM
Flash GAPPS
wipe cache & dalvik cache.
Then reboot.
Hi guys.
Been trying to figure this our for hours.
I flashed AOSPxXx-ICS-20121111 on my phone but not it runs brutally slow. It takes a like 30 seconds to launch apps.
I followed this steps.
booted to cwm
wiped user data
wiped cache
wiped dalvik cache
install rom
rebooted
let it sit for 10+ mins
What am I doing wrong?
Thanks
Wipe all of the above, plus the system partition.
I cant confirm that the new rom wipes the system partition for you, but if not, then you dirty flashed.
that will cause all kinds of trouble.
Also, did you add any mods like a new kernel ?
I ultimately suggest a new full wipe, and flash. and even a new download of the rom to ensure a clean build.
Sometimes they arrive all borked up....g
Rewipe reflash nd if persist reboot a couple times sometimes it can be slow after aa flash give a couple of reboots nd itll snap too
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
What else did you flash? Theme, modem,??
Just wipe and re flash. Don't restore apps, get them from the market.
All I did was flash a new rom, nothing else. I will try again =)
ok i finally got it to work. used odin and restored ics 4.0.4 =)
This is my first time trying to install this I have a Samsung galaxy s2 T989 And I'm pretty sure I've done it right. I factory wiped it, cleared the cache and the cleared the cache in advanced settings. It's been atlesst over 10min and its still on the blue circle just spinning around.
Can someone please help me?
When I installed cm10.2 for the first time mine done that. Best bet and worked for me is do a battery pull and reboot. If that don't push you past the spinning circle which I ran across you should reinstall the ROM again and it should boot up just fine. Hope this helps
Sent from my SCH-I545 using xda app-developers app
You've bootlooped it. The T989 is a pain when flashing custom ROM's because the custom recovery's built in wipe doesn't quite work for it.
Keep this ZIP handy as you'll be needing to run it every single time you need to wipe data/cache and dalvik. Don't ever ever use any other means of wiping aside from this one until this issue is fixed. I've been doing this for a while and have flashed upwards of 20 ROM's on my T989 alone.
It's called Darkside Super Wipe.
http://forum.xda-developers.com/showthread.php?t=1477955
So, just put that ZIP on your SD card, along with your custom ROM and appropriate Gapps. Flash Darkside first (always) then flash ROM then Gapps. Then reboot and problem solved!!
Good luck!! :highfive:
So after putting that in my sd card. Install that and gapps and cm10.2?
Sent from my SGH-T989 using xda app-developers app
murtillon said:
So after putting that in my sd card. Install that and gapps and cm10.2?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yup, install Darkside Super Wipe first, then install the ROM zip then Gapps. Then reboot!
Should I factory reset and clear caches first or no?
Sent from my SGH-T989 using xda app-developers app
murtillon said:
Should I factory reset and clear caches first or no?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Nope, just run the Darkside Super Wipe and it'll erase all /system, /data and /cache partitions. And like the thread says, it won't wipe your SD card or EMMC.
Just make sure you don't leave the recovery without flashing the ROM and Gapps
Also, you should get in the habit of making backups. You can make them from CWM or TWRP's custom recovery.
Titanium backup is an application on the Google Play store that you should look into as well my friend.
T989 Tears
Very finicky phone for customs. On mine I can get no ROM to fully load other than the stock Koodo 4.04, and CM 10.0 I flashed the latest radio for JB, darkside super wipe, flash custom rom, flash gapps, wipe dalvik. The same process for every ROM i try... still no success, 10.2 stays at boot. Dirty Unicorns starts boot, goes through the "optimizing apps" stage gets to the "starting apps" and reboots, lather, rinse, repeat. I've tried a few others, AOKP and some others. Still only Koodo 4.04 and CM 10.0 will fully boot. Not even the stock T-mobile 4.03 will boot (came with phone). Going to give JMT a shot, it looks pretty
i keep getting system ui stopped blame split screen
Sounds to me the possibility you dirty flashed???
Unless you go clean, reminents of previous roms can cause these issues. If you go super clean and still have problems, I would re-download file and try again.
Honest guess, you went dirty.
Many folks flash rom 2 times then gapps as a phone can react differently from each flash.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
I think I did a clean flash wiped cache system and delvik cache and wiped data /factory reset flashed rom then the gapps
queentiger21 said:
I think I did a clean flash wiped cache system and delvik cache and wiped data /factory reset flashed rom then the gapps
Click to expand...
Click to collapse
The process.........
Factory reset 3 times
Flash rom 2 times
Then gapps
Theeeeen wipe Davlik and Cache 1 time will do
Boot and wait your 10
Reboot again.
That is super clean right there my friend, and I rarely, rarely have issue. If this doesnt work, then it just may not be for your device. I couldnt run Carbon on mine.
Just the way it is sometimes
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
thank you so much for the information trying it now
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
efuzone said:
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
Click to expand...
Click to collapse
Is the phone branded Verizon? If it is, use the Spyder version. If not, UTMS Spyder.
I gave up on the Liquidsmooth rom. I went with AxxionKat and it runs so much better. Not one problem.
pearlheartgtr said:
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
Click to expand...
Click to collapse
since new nightly build already available (LS-KK-v3.2-2014-08-16), it will be good idea to upgrade, just flashed this morning & everything is fine except moving from dalvik to ART caused bootloop..
I'll stick with AxxionKat. I've had absolutely no issues with it thusfar.