I am having some major problems with my touchscreen/digitizer.
About three months ago I dropped the phone and it cracked the screen in a few places. It was still completely usable.
In the last month, there have been some areas of the screen that have become completely unresponsive. I could usually get around this by rotating the phone, touching a different area, and then rotating it back. However the problem seems to be getting worse where larger and larger areas are unresponsive. There is now a rectangular band about one centimeter high that goes the complete width of the screen that doesn't respond to any touch, ever.
In addition to the completely dead zones on my screen, the touchscreen sometimes becomes completely unresponsive which can be fixed by locking and unlocking the screen.
I don't have a lot of money for a new phone, so I was able to live with these problems, but they're getting worse. Also, if my wife or anyone needs to borrow my phone they often find it completely unusable. In the middle of me explaining the problems and workarounds, they usually just give up.
I'm wondering if I replace the digitizer, will this problem go away? Or is there something else wrong with the phone that might not be serviceable by me? In addition to the digitizer problem, my headphone jack stopped working. If I plug anything in, nothing happens and sound continues to come out of the phone speaker. That's leading me to believe the phone has some deeper problems that I might not be able to fix, but if I can fix the screen I can live with the headphone jack problem.
My digitizer wasn't cracked, but I have the same problem. I send my phone to service and I'm waiting for response.
"Service" is not an option for me. The warranty is gone. I do not have insurance. I purchased the phone refurbished for $50. The only reason I did not replace the digitizer the moment it cracked is because the digitizer is the same price as what I paid for the phone in the first place.
Mine under warranty so I send it to motorola service centre and they replace the digitizer for me. I get it back in 2 days after sending it in.
But they flash my ROM and I'm not sure whether my phone still unlockable or not.
Btw, I have read a lot of atrix user with digitizer issue. It send common for our phone. You can easily spot few threads showing you how to replace the digitizer.
Sent from my MB860 using xda app-developers app
Soooo, I hate to bring back a dead thread, but I figured it was better than starting one of my own.
My Atrix recently had a sudden impact of its own. Cosmetically, it is still perfect. The touchscreen no longer responds though.
Phone still works. It receives calls, text, syncs with email, changes volume, etc. The touchscreen just wont respond to any of my fingers lol.
My question to Ovitz (or anyone else) is, did you get your phone back fixed and what was the solution?
I am leaning towards the digitizer, but I just want to verify before I put money into it. There are no rattles in the phone. No crack at all. I, generally, take great care of my phones and this one looks basically like it did out of the box.
Thanks in advance!!!
§
You dislodged the connection for the didgitizer or broke. I suggest you replace it. There have been plenty of Q and A threads on this. Get one from eBay oem, YouTube search a how to, and take it slow.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Related
Well, I have had the 3D since launch. After the first couple of days I started seeing phantom touches. After 1 week I started to notice this was getting far worse and that the display/digitizer was registering touches when nothing was near the device.
Called Sprint walked through a full wipe of the OS and reinstall. That was a no go and wasted nearly 2 hours of my time on the phone... However the Level 2 tech agreed that it appeared to be a failure of the device and advised that I return it to the Sprint store.
Got to sprint and showed them the video I had made of what the phone was doing. They also agreed that something was wrong with the phone and replaced it immediately.
Just in case I am not the only one that is having this problem I am uploading the video to youtube... I will share that link with you as soon as it is done uploading.
This is a video showing the issue using the "draw" application:
If you run into similar issues let me know!
I've seen some strange things happen but I figured it was the Otterbox Defender case or humidity here in Florida.
Will watch more closely now. Thanks for the report!
I've also been having strange issues, where touches are appearing out of nowhere. Had to turn off the pattern lock as a result, since I nearly got locked out of my device since it wouldn't register my pattern properly. It seems to 'reset' itself after a couple reboots, but starts acting up again at a later random time. Between the poor GPS performance and this issue, I'm starting to wonder if I upgraded from my Evo 4G a bit too early...
Same thing happens to mine while texting I would click a letter but it would click another one. It just did it once tho
never discount the existence of a true phantom pressing those screens ;p
I have heard of several people with the issue. Kinda makes me nervous. Already swapped 1 due to bad camera.
Sent from my PG86100 using Tapatalk
Same thing happens to my e3d
My touchscreen is having issues lately too. It'll work fine for several hours, then the screen will either be unresponsive or register phantom movements. Sometimes it won't register the lockpattern as I move my fingers, and other times it refuses to swipe left or right between screens. I've been trying to figure out if it's some kind of software or hardware issue, but no luck. I'd hate to return it(since it's my 2nd 3D) but if it continues for the rest of the week, it's going back. I made a video clip of it jumping screens randomly just in case the Sprint store ask any questions.
*update
I installed the paint program like OP did and had similar things happen on mine with the random lines and unresponsive screens. I guess I'll return tonight for 3D #3....
Mine just started doin the same thing lately, any of you have results yet? Did you turn in your phone or did they repair it? I really dont wanna go to the sprint store and turn mine in because i dont want a refurbished unit. 9/10 in the past when ive went through insurance, the phone they send me is broken as well and then it goes round and round. Sometimes my phone will just stop responding to touch, it will have phantom touches and/or on the htc_ime mod keyboard on compact qwerty; the ui, jk, m, . column up and down wont work at all. strange to say the least, never had this happen to any of my phones before.
My launch day EVO 3D is being replaced also due to this issue. She be back up and running with my new phone Wednesday.
Sent from my PG86100 using xda premium
Well mine developed this problem a few days ago.
The top inch or so of the screen and when I get this problem the touch sensitive buttons also dont work sometimes.
My problem and my question is that, I dont have insurance on the phone, I bought it on Amazon from a private party after my EVO 4G was stollen.
If I take it to Sprint can they just replace the digitizer, since this is a defect of the phone and would that even fix this problem?
If you don't have insurance on the phone then you need to go on ebay and search for evo 3d lcd digitizer housing. Yesterday, I paid $50 shipped from usa.
If you cant find a good listing then u can buy the lcd + digitizer (or just the digitizer) without housing. But it's hard work to do these two because those things are glued and painful to disassemble. It will definitely look jacked up after all your hard work. Just get it with the housing (front black plastic)
Here is a usa seller with what i'm talking about but he as no feedback so i didnt buy from him.
http://www.ebay.com/itm/HTC-EVO-3D-...ultDomain_0&hash=item1c20adc044#ht_2172wt_286
There is a hi res disassembly video on youtube.
I've been experiencing this issue lately as well. I've had this phone since the month it was released and it only started acting up as of a couple weeks ago. It started off as the touch screen not registering any touches, not even the capacitive buttons. Then this week it started it started doing the crazy phantom touch thing. In order to get it working, I simply shut off the screen then turn it back on again. It seems to happen less if I'm lighter on the screen. Thank gawd I'm not the only one experiencing this.
Sent from my PG86100 using XDA App
I called a sprint store and they told me that they would either replace the digitizer or the phone for a fee of 35 dollars, since I did not have insurance.
So, I took my phone in and they had another screen that was from another phone that had a different problem.
After they replaced it, he did not charge me
I was happy until I started to drive home and I was checking it some more and realized that the new screen also had the same digitizer problem.
I guess im headed back to Sprint tomorrow hopefully they give me another phone. and I will happily pay the 35 dollars.
Wow thats a real good deal. I never considered taking it for repair. I thought it must be cheaper to do it myself. I hope they can get you a working one. I'm sure they won't try to charge you for it when you go back.
I'm having trouble with my Evo as well, not sure if its the same issue or not.. for about the past week my notification bar will be intermittently unusable, I can't pull it down at all.. then sometimes it'll work. Unfortunately the times I've been near a sprint store it's working fine.. UGH. Also it's been giving me some random letters occasionally when texting, or the most aggravating is when it "clicks" the backspace button and that sticks and it erases whatever text I just wrote. Sounds like a similar issue.. I just wish mine was consistent, sometimes it works perfect.
Call me an idiot but whats the app that you were using!?
Edit:nvm found it haha
Well today i paid the 35 dollars and will be getting another phone
A really good app for testing screen problems is call "touch test"
http://www.appbrain.com/app/touch-test/org.hermit.touchtest
Mine seem to get worse when i had more then one finger on the screen. and it got really bad with just a little bit of preasure on the screen.
I'm having a similar problem but it is only with the capacitative soft keys.
I have problems from time to time. It gets so annoying on Swype because it will leave breaks while I'm Swyping and instead of one word I'll get like four weird words instead. Very cumbersome.
Sent from my PG86100 using Tapatalk
I just can't freaking stand it.
Starting about three weeks ago I have been having major problems with my Streak doing spontaneous restarts. I tried everything. Nothing worked.
I went as far as to use the Wiki instructions to install a version one generation old on the phone so that it would do an over the air update to the current release, which it did. Didn't help. Whenever I used the phone for a long call or to play a game or use navigation, anything that kept it actually doing something for several minutes, it would start rebooting. Sometimes it would freeze to where I had to pull the battery. I even bought a disposable phone while on vacation so I could have something I could count on.
So last week I called Dell support and described what is going on. When the tech heard the symptoms and that I had already done a factory reset and fresh loads and more factory resets, he quickly decided to replace the phone.
I have had the phone since April 2011 and in May I dropped it in my living room. It has worked perfectly but does have a crack in the glass that is purely cosmetic and is not why I tried to get it replaced. The phone has worked perfectly until recently.
I'm banging my head on the desk because, wouldn't you know it, the phone has been working perfectly since I called in. We didn't do anything, just talked about the phone, and it has had one restart in the last week. As a test, I used the Navigator for the 30 mile commute home from work. My wife called me, the phone answered, worked flawlessly on speaker, and when she hung up the Navigator came right back up as smooth as you could ask for. The one game I play right now (Grave Defense) has worked flawlessly except for one restart in the middle of a game. I couldn't ask for the phone to be better.
So what do I do when the replacement arrives? I'm not sure if I trust the phone not to start screwing up again, but I'm going to be sending back a phone that is apparently working fine but has a cracked glass. We all know the entirely reasonable conclusion they will come to.
So what should I do?
Maybe you should call Dell and tell them that the screen is cracked. Find out if they will even take it back. They may not, and wind up charging you for the new one. I've not heard of them doing this, mind you, but it sounds possible.
They may just tell you to send in the old one anyway, but you may as well let them know that the screen is cracked, since they are going to find out when they get it. Hopefully since you already have a return authorization, it wont matter...
Has anyone noticed it seems to be easier to get a replacement since they EOL'd the Streak?
Sent from my Dell Streak using Tapatalk
Maybe they're trying to clear out stock?
I had no problem sending it back with the cracked glass as long as the problem had nothing to do with the glass. Now the damned thing is working, so I have an issue with it.
I really don't understand this phone. I didn't change anything and it is like a different phone.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Oh, I thought the screen cracked after you called them.
Nevermind. As long as you disclosed the cracked screen, don't hesitate to send it back. If it was bad once, no reason to think it wont be again.
There are definitely some flaky ones.
From some posts I've read, it does seem as though they are being unusually friendly about returns lately. Prolly just my imagination...
Sent from my Dell Streak using Tapatalk
slaydog said:
As long as you disclosed the cracked screen, don't hesitate to send it back.
Click to expand...
Click to collapse
Oh, I never said I did that. I don't want people to think they are knowingly taking back units with cracked screens. The tech didn't ask if it had ever been dropped and I didn't see the point in volunteering the information as it had nothing to do with the problem I was having. I know that is not exactly taking the high road, but as I said, the screen isn't why I'm exchanging it. I considered swapping my cracked screen and the unbroken one from the replacement and sending my flaky phone back with the good screen, but they would probably notice that the phone had been dismantled and assume that is the source of the problem. I'm between a rock and a hard place here, but it's my own fault. I'm probably going to end up with a bill for the replacement phone, but I'll cross that bridge when I come to it.
I'm mostly just astonished at how freaking strange the behavior of this phone is. It was working fine then lost its mind for about three weeks and then decided that it was going to start working the way it is supposed to again with no interference from me. It was flaky in the morning, I did nothing to it, and that afternoon it started behaving itself.
Well, it froze up good yesterday. Tried everything short of swinging a dead cat over my head in a cemetary at midnight and got it working again, just in time to retire it.
When I got home the replacement was waiting for me. Smooth as silk. I played the hell out of my new favorite time sucking game last night (Stupid Zombies) and not a single hiccup. I'd love to lose some of the extra apps, but I think I am going to leave well enough alone this time. Now I need to find out how much Dell is going to bill me for returning a unit with a cracked screen, but I'll worry about that when it happens.
well i have an odd problem, one one section of my screen doesn't pick up touches, only the area where the "C" is on the keyboard...its annoying due to thats where the OK buttons are...
i can still navigate sense i can use the track ball..
anyone else have this issue, or something similar?
Try wiping back to factory if stock or reflash the rom if rooted?
I had a weird issue with the touch screen on condemned 18.3 where on the lockscreen trying to drawdown the slider and then draw the pattern, it would freak out and glitch and not follow my finger at all and take several tries to get the pattern correct.
I then wiped and flashed the latest 4.0 GSB and haven't had any issues since.
That's not quite a touch screen failure as yours is, but I thought it would help as an example as something gone wrong and how I was able to remedy it.
i've tried flashing a few different roms, went from cs18.3 to a 2.1 sense rom, back to the latest gsb. it appears its must be a problem with the digitizer...
really sucks, i have to wait to april to upgrade this phone...
might be on craigslist looking for a cheap droid 1...
Ah man, that's unfortunate. Probably wouldn't be worth it to try to replace the screen/digitizer either. Yeah, that's probably your best bet, looking to get another phone. That's how I got my Eris, from craigslist. Great way to go about doing so.
Good luck to ya.
I actually have the same problem and something leads me to believe that an update is causing this. I had it bad a few weeks ago (can't press C, V or X - though I can swipe to the keys sometimes) and then I got a few market updates for Handcent, SuperUser, and something else which then cleared it up for a few days. Then I got more updates and it's back to the failing keyboard!
I really don't know how to pin point it and I haven't done any resetting or testing yet, but I have like gut feeling something is wrong with the software, not the touchscreen since someone else is having this problem.
Mine has been failing little by little. Im now down to the top right corner, bottom left, and bottom middle not responding. It hard to even get the apps drawer to open. It all started with the letter C with me too. Just gets worse.
****, my whole qwerty row doesn't work, neither does the trackball. Upgraded to a SGS2, but I still tinker with the ol' eris.
mine moved, it started working fine for a few days, then just a smaller section to the left of C doesn't work, only really effects when i have an "OK" to press...but track ball still works and typing is so much easier now.
my wife thinks its because i dropped my phone that it started working again
I know this thread is a couple of months old, but...
There's an area on mine at the top right below the notification pull-down that appears to be dead. I'm thinking it's because I've dropped it about 10 times, but nothing looks wrong with the screen otherwise. I've thought about buying a replacement screen for about 15 bucks, but I'll be able to upgrade at the end of March, so I'm really just thinking about holding off (though if the new screen/digitizer worked, it'd make for a good mp3 player with the wifi script).
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
MBL85 said:
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
Click to expand...
Click to collapse
YMMV.
Someone gave me an Eris that had digitizer problems along the lower left side of the screen (in portrait orientation). I bought a replacement digitizer ($22 iirc), installed it, and it worked perfectly - for about the first 30 minutes. Then, the problem re-appeared in exactly the same location with the new digitizer.
Same behavior for a variety of stock or developer ROMs, so highly doubtful that it was a "software problem". Very very odd - the chip that does the capacitive sensing is on the flex circuit attached to the digitizer, so it gets replaced when you replace the digitizer; I suppose that the signals that come off the mini-connector between the digitizer assembly and the phone's mobo are only power, ground, and I2C signals.
But there you go; taken all those observations together, I'd suspect that I had a problem on the phone's motherboard which was thermally dependent.
Despite my (negative) experience, the odds are still in favor that a digitizer replacement will fix the problem; but there is an outside chance that it won't.
just sayin',
bftb0
This seems to be more of a software issue than a hardware issue. I'm thinking it might have something to do with the kernel as well but I'm not sure...
Anyway the touchscreen on my rooted Evo 3D with hboot 1.50 is acting up. Sometimes it completely freezes up, and other times when I try and press different parts of the screen, like the the app drawer it just doesn't register. When it freezes up it also affects the soft buttons at the bottom of the phone.
I've tried wiping it several times, and I've also tried this across several different roms, even nandroids, and it is still causing problems.
Any ideas on how to fix this?
Try calibrating your screen threw settings to see if that helps.
Locked & Loaded
""shooter on Deck""
laie1472 said:
Try calibrating your screen threw settings to see if that helps.
Locked & Loaded
""shooter on Deck""
Click to expand...
Click to collapse
I had that thought too but it still didn't work. I should also mention that the only way to "fix" the screen temporarily is to hit the power button and then hit it again to wake it back up. It usually does the trick... for a little bit. Also sometimes it just goes berserk and start pressing things without me even touching the screen
Are you running any kind of lockscreen program such as widgetlocker? I had similar problems when doing so, all issues stopped when I uninstalled.
ifly4vamerica said:
Are you running any kind of lockscreen program such as widgetlocker? I had similar problems when doing so, all issues stopped when I uninstalled.
Click to expand...
Click to collapse
I wish I was so I could fix it but I'm not.
Sorry man, was stabbin in the dark. good luck.
Think it's the Digitizer...
I have the same problem with an Evo3D hboot 1.5 also. It is rooted (ship s-on) I've had the phone for about 4 months, taken good care of it, and thus thought this bug was a software issue as well...
This is what I've tried:
-Factory Data Reset
-Restore Backup partition to original ROM
-Tried different ROMs (sense3.0, olympian xe, sicksense vX)
-Deleted and reformatted SD card
-Leaving SD card unmounted
It seems to be a popular issue, and after searching the CDMA Development forums I have found at least two other threads on the same topic here:
http://forum.xda-developers.com/showthread.php?t=1398048
http://forum.xda-developers.com/showthread.php?t=1383707
I don't have insurance, and rooting hboot1.5 is not reversible, for it is permanently recorded on the bootloader, so I'm assuming that my local Sprint representative will be of little help in the matter. From what I can find it would seem that our options are limited to:
A.) Replacing the Digitizer/LCD assembly. Looks like this runs between $70-$120. Here is a solid video on YouTube demonstrating how to remove and replace the Digitizer/LCD:
http://www.youtube.com/watch?v=suS34kNNuLo
B.) Replace the Digitizer only. From what I've gathered this is a risky maneuver which is best left to professionals with the *right* equipment, however is a much cheaper option, Digitizers are around $20.
I left a message with a local cell repair shop asking if they could replace the digitizer without a new LCD, and expect a response tomorrow probably.
Unless anybody has found an alternate cause/solution to this problem, which I would be eternally grateful for, looks like hardware replacement is the only solution.
2 questions one are you guys using screen protectors some of them will cause issues crazy ones from random clicking to unresponsive screen . Also are you using your phone out in the cold weather or really humid out ? A cold screen and hot hands will also wig it out.
I have a Zagg screen protector, which Radioshack carries for numerous phones; however it was installed when I bought the phone, four months ago, therefore I cannot imagine it would suddenly be the problem.
Also, the screen glitches at room temperature, at the most unfortunate times.
I just flashed Timat Kernels, with no results....
root3dnoob said:
I have a Zagg screen protector, which Radioshack carries for numerous phones; however it was installed when I bought the phone, four months ago, therefore I cannot imagine it would suddenly be the problem.
Also, the screen glitches at room temperature, at the most unfortunate times.
I just flashed Timat Kernels, with no results....
Click to expand...
Click to collapse
I have a zagg on mine I put on no issues for me. How do you carry your phone ? Do you tote it around in your back pocket? Just curious. Some folks have squished there phone sitting on them and messed up the screens. Not sayin you did that . Also folks carry in pocket on hot summer days and sweat gets inside the unit and messes with it.
Also is your phone brand new or a refurbished unit?
The phone is a new unit and I try to be conscious of high-moisture situations, so hopefully that is not to blame. If anything, excessive pressure may have been the cause, from a vacuum-sealed Drycase; but I'm hoping HTC's build quality would withstand such force, which should be minimal compared to being sat on.
Others are experiencing issues with the E3D digitizer, and I'm 90% sure my phone is not misbehaving from physical/moisture damage.
Is there a moisture damage indicator that can confirm/dismiss that theory?
Thanks for the suggestions
root3dnoob said:
The phone is a new unit and I try to be conscious of high-moisture situations, so hopefully that is not to blame. If anything, excessive pressure may have been the cause, from a vacuum-sealed Drycase; but I'm hoping HTC's build quality would withstand such force, which should be minimal compared to being sat on.
Others are experiencing issues with the E3D digitizer, and I'm 90% sure my phone is not misbehaving from physical/moisture damage.
Is there a moisture damage indicator that can confirm/dismiss that theory?
Thanks for the suggestions
Click to expand...
Click to collapse
Check the battery it has a sticker that will turn a solid color if it seen some water or high humidity. Also I think there is one inside the phone.
I have in the pass seen evo's that were refurbs or new units that were sat on the refurbs glass wasn't glued well and moisture got under the glass and screwed the screen up with random issues. New phones can have the same issues I guess if you really put pressure to it tho there sealed pretty well.
If the Digitizer was going bad from pressure your screen would have faint black lines going down it kinda like graph paper.
I have my phone in a trident kraken case it's been doing good so far.
After hours of research, countless nandroid wipes, and even a few ROMs, I have determined this to be a hardware issue! (at least in my case)
Much thanks to Landon4444 for providing a way to test for a lame digitizer
http://forum.xda-developers.com/showpost.php?p=20791773&postcount=40Here's how to check if this issue is result of a faulty/worn digitizer:
In the phone dial exactly *#*#3424#*#* to access the HTC diagnostic menu.
Choose line test from available options, screen will turn black.
Draw small test squiggle.
Hold phone by corners with fingers/thumbs (landscape).
Gently, twist phone torsional-ly. *GENTLY!*
In my case, certain slight torque creates a false contact in the upper-middle of my screen. Fortunately twisting slightly in the opposite direction HAS RESOLVED THE PROBLEM FOR NOW. (that was easy) However, I would not expect this tactic to work for long, and am looking into getting the digitizer replaced at the cell shop.
Evo 3d help guys!!
Okay so I just got a raise and an Evo 3D part of my boss's incentive package. (I know I have a great boss!!) but anyway its been less than a month and I haven't purchased any of the screen protector stuff or case. It is now 17 degrees in New York and I'll just drop the phone in my pocket while walking but yesterday at the beginning of a date the parking meter wouldn't take my money and upon trying to use my phone it started dialing it's own numbers and wouldn't let me enter any of the numbers for my code (to unlock). *Mind you my date kept telling me all night "Its a sign that you need the iphone" and I totally like the HTC 3D.I tried calibrating **BY THE WAY IT'S NOT ROOTED YETTT* but the only options your given is the GSensor Calibration. I've noticed that after I enter a warm area the phone starts working fine again. I've never had a smartphone and I think,upon finally getting one, that's it's totally ridiculous that the phone stops working because of the weather. At this point I think I have a faulty phone and am gonna return it to only get another 3D,but has anyone heard of this issue and if so how can I fix it. I mean like what if I had a car accident or an emergency and my "smartphone" starts acting up because of the weather???
Hey guys...I put this post up a few days ago and still haven't received a response. my timing to retunr the phone is running short so I NEED SOMEONE TO HELP PLEASE!!...Is this a normal circumstance that my phone is going through? if not I'll return it and get another one.
Its some grounding issue occuring due to maybe screen touching the main board. Its occurs on my phone very frequently and when normal occurs only if i press hard on screen
my phone also freezes up sometimes and goes crazy and it takes it some time for it to start working....
I ended up replacing the unit.it was faulty. Funny thing is I was trying to tell the guy the problem and when he grabbed it he saw it was broken.the problem worsened to the point the the phone was dialing on its own and going haywire.
Sent from my PG86100 using XDA
So, after cracking my digitizer a few wks ago- I decided to drop the 65 bucks to have my digitizer professionally replaced. This is the first time I've ever had one replaced. Last few days I've noticed things like random screen unresponsiveness and capacative buttons not working until phone is put to sleep and woke back up. Do these seem like side effects of this being a botched repair job? At first I thought it was the rom I was on, but I switched back to sense, and now it's still doing it. Totally random, sometimes I can go hours without it screwing up.
Hag77 said:
So, after cracking my digitizer a few wks ago- I decided to drop the 65 bucks to have my digitizer professionally replaced. This is the first time I've ever had one replaced. Last few days I've noticed things like random screen unresponsiveness and capacative buttons not working until phone is put to sleep and woke back up. Do these seem like side effects of this being a botched repair job? At first I thought it was the rom I was on, but I switched back to sense, and now it's still doing it. Totally random, sometimes I can go hours without it screwing up.
Click to expand...
Click to collapse
sounds like its not getting a good enough ground and hence the spottyness. i would take it back to who did it for you and have them fix it.
Hag77 said:
So, after cracking my digitizer a few wks ago- I decided to drop the 65 bucks to have my digitizer professionally replaced. This is the first time I've ever had one replaced. Last few days I've noticed things like random screen unresponsiveness and capacative buttons not working until phone is put to sleep and woke back up. Do these seem like side effects of this being a botched repair job? At first I thought it was the rom I was on, but I switched back to sense, and now it's still doing it. Totally random, sometimes I can go hours without it screwing up.
Click to expand...
Click to collapse
I had similar issues on my Asus Transformer after I took it apart and put it back together. It ended up being simple: the ribbon cable going from the digitizer to the main board was seated slightly crooked, causing it to occasionally malfunction from either poor contact or shorting two neighboring pins every now and then. Re-seating the ribbon cable into the connector seemed to fix the issue.
It seems likely that whatever is causing your issue would be a similar connection problem between the digitizer and the board. It is also possible that the replacement digitizer is simply defective. Either way, sounds like you need to talk to the company that replaced it for you and see what they can do to fix it.
a.mcdear said:
I had similar issues on my Asus Transformer after I took it apart and put it back together. It ended up being simple: the ribbon cable going from the digitizer to the main board was seated slightly crooked, causing it to occasionally malfunction from either poor contact or shorting two neighboring pins every now and then. Re-seating the ribbon cable into the connector seemed to fix the issue.
It seems likely that whatever is causing your issue would be a similar connection problem between the digitizer and the board. It is also possible that the replacement digitizer is simply defective. Either way, sounds like you need to talk to the company that replaced it for you and see what they can do to fix it.
Click to expand...
Click to collapse
Thanks for the replies. I talked to them, and get this.. They're ordering me another rezound.. I guess it's such a PITA for him to take back apart, that he'd rather just eat the charge of a new phone (at least it better f'ing be new!).. Supposed to be in on weds.. Didn't I read somewhere that they were out of rezounds?
Hag77 said:
Thanks for the replies. I talked to them, and get this.. They're ordering me another rezound.. I guess it's such a PITA for him to take back apart, that he'd rather just eat the charge of a new phone (at least it better f'ing be new!).. Supposed to be in on weds.. Didn't I read somewhere that they were out of rezounds?
Click to expand...
Click to collapse
that was a temp thing for VZW returns. they have a bunch now. lol
So now that I know I'm going to have a new rezound tomorrow- I'm re-doing my homework on getting it unlocked/s-off.. The jbear instructions have d/l's for ics leak fw, do I really have to be on that leak, or does it work if I immediately ruu to the latest 4.03.605.2 and install a custom rom w/ root?