I downloaded androwook 2.1 and cleared my whole sd card. Which was one of the options for androwook. Then I flashed another rom that bootlooped. Now when i go to cwm recovery and install a zip the only zip that shoes up is the one that doesn't work.What should I do. I am new at this.
Related
I ve never flashed just a kernel before done other things but not just the kernel. I am assuming the process is the same as a rom
Load the new kernel in the int sd card
Boot to recovery from clockworkmod
Clear cache etc.....
The reinstall the kernel by picking that under reinstall packages
and it should do the rest ?
Pick install zip then choose the zip, let it do it's thing (usually only a few seconds) and reboot. If you pick reinstall packages all that does is install clockwork again.
thanks
Thanks, got it
I finally managed to root my TBOLT with easy root, the latest version he put out last night. I made it through step 3 which just said congrats you have rooted, or w.e then it says flash clock world and i get "error occurred while attempting to run privative commands" any help for this?
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
pmazz850 said:
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
Click to expand...
Click to collapse
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
oneders65 said:
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
Click to expand...
Click to collapse
you can do either. I prefer to just boot into recovery, so I can wipe data/factory twice, and wipe cache, and delvik cache twice. then flash a new rom.
the second way you mentioned is more automated, but I don't feel is a thorough.
I tried all the steps but sometimes it just takes a simple reboot.
I was running the latest CM7 nightly for a while (release 116). I decided to give CM9 a try. I wanted to go back to CM7 so I tried flashing back but something went wrong. I had backup so I tried restoring that in CWM but it gave me a checksum error.
So I tried out the vanilla ICS 4.0.3 (KP8) build using odin. Used it for a bit and then decided to go back to CM7. I flashed to my original OS using ODIN, rooted the phone. Now, whenever I try to flash anything in CWM, it installs but then just goes into a endless boot sequences. Tried flashing MIUI and CM7 with no luck.
I'm on a rooted KI3 release atm.
How can I completely wipe my phone? I've reformatted my external and usb storage with no luck.
...................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Root with same CWM as backup .
Boot recovery restore backup .
jje
Thanks! Following the processes. Wasn't able to unmount SD card to format it but /data /system and /cache formatted fine. *crosses fingers*
going to use a freshly downloaded copy of CM7 nightly too incase my old zip got corrupted somehow.
I can install my stock firmware and root it with odin.
But, once I try to install Rom Manager and update CWM recovery things start going wrong. It reboots into the regular android recovery console and fails to install the update.
But, if I battery pull and boot into recovery it boots into CWM recovery 4.0.0.5. I can apply the update.zip ROM manager downloaded. But, then when I try to flash anything it doesn't install properly and I get stuck in an endless boot loop. Can't even boot into recovery. Have to start all over again with ODIN.
Rom Manager is causing you grief.
Had a similar thing happen a while back. I wouldn't use it at all if I were you and stick to using CW Recovery. I don't know the why/how/wherefore, I just know that time I tried to use it, it broke recovery & put me in a bootloop same as you.
I have been trying to get to the screen where i can install from sd but it will not let me get to that point. I boot into recovery mode but the options it gives me is
reboot system now
reinstall packages
delete all user data
delete cache data
format internal sd-card
the letters are blue..................
can some help me out????? i want to install a different rom but i can't get to the install rom from sd option
Thanks
Download cwm rom manager from the manager, and install the recovery.
After that you can install the rom you desire!
i tried that and still same result. I have install other roms before but now it wont let me get to the install from sd screen
You should probably learn how to flash back to stock first (instructions are in many of the Guides). If you are flashing roms, eventually something will go wrong, and you will need to reflash to stock, or at least install a new kernel and recovery. Using Odin or Heimdall to install a kernel is part of the instructions for installing CM. Better to have Odin and the JFD file on hand when your phone bricks or boot-loops.
doozerpaul said:
I have been trying to get to the screen where i can install from sd but it will not let me get to that point. I boot into recovery mode but the options it gives me is
reboot system now
reinstall packages
delete all user data
delete cache data
format internal sd-card
the letters are blue..................
can some help me out????? i want to install a different rom but i can't get to the install rom from sd option
Thanks
Click to expand...
Click to collapse
Select reinstall packsges....you may have to do it twice then you should be out of stock recovery and into clockwork recovery
Sent from My I Screamed Vibrant
You can download CWR from my signature and put it on your internal SD. Put the update.zip on the internal and make sure it is only thing labeled .zip on there. Hit Reinstall Packages, let it cycle then hit it again. Recovery will go from blue to green and then you can install ROM from SD.
+1 on the reading and how to install ROMs. Plus while you are in CWR, go to Backup/Restore and do a nandriod backup.
Good luck.
i have all that and have gone back to stock and everything. still same results
doozerpaul said:
i have all that and have gone back to stock and everything. still same results
Click to expand...
Click to collapse
What these guys have told you has worked time and time again for most everyone else. What I would recommend is that you get the AIO toolbox. Everything you need in a one-stop-shop.
I recently updated my ROM through the goo manager app to this:
http://goo.im/devs/succulent/acclaim/cyanogenmod/sdcard/cm_acclaim_10.1_17MAR2013_HD_SDC.zip
In the new update CWM Recovery was updated to 6.0.2.9. I did a dirty installation, flashed ROM onto SD card, and reset my nook. Everything worked fine, but I forgot to flash the gapps so I downloaded them and reset my Nook. In Cyanobot I selected SDC Recovery, but it went to a black screen for a few seconds and reset my Nook then booted from emmc (my stock.)
Question being, is there something I'm missing to get the SDC recovery to work? Do I need to just download a recovery.img and put on my sd card?
datallboy said:
I recently updated my ROM through the goo manager app to this:
http://goo.im/devs/succulent/acclaim/cyanogenmod/sdcard/cm_acclaim_10.1_17MAR2013_HD_SDC.zip
In the new update CWM Recovery was updated to 6.0.2.9. I did a dirty installation, flashed ROM onto SD card, and reset my nook. Everything worked fine, but I forgot to flash the gapps so I downloaded them and reset my Nook. In Cyanobot I selected SDC Recovery, but it went to a black screen for a few seconds and reset my Nook then booted from emmc (my stock.)
Question being, is there something I'm missing to get the SDC recovery to work? Do I need to just download a recovery.img and put on my sd card?
Click to expand...
Click to collapse
Solved the problem. I just downloaded the latest version, CWM 6.0.2.9, and put it on my SD card. Works just fine. Downloaded from here:
http://goo.im/devs/succulent/acclaim/recovery