here is situation:
1. I had rooted 1.4.2 with not blocked OTA and my NT updated to 1.4.3.
2. It is obvious that root and some apps stopped working and some of them even disappeared from the device (like WinAmp for example).
3. I rooted 1.4.3 with SDcard method and it looked like things are fine until I started to get my apps back.
4. I used FIREFOX as a main browser with 1.4.2 update and after registering at Play store on rooted 1.4.3 I read that FIREFOX is incompatible with my device!!! What the hell?
5. Also, my NT registered at Play as NEW device, not the old one as I had - so it seems my serial changed or something has changed in the build.prop or somewhere else in the identification part of device.
6. Besides, after root, i started installing apps and it seems Notification bar has some sort of glitches - it does not clear all the messages and keeps the last downloaded file in the list...
Can anyone point me how to fix incompatibility issue?
---------------
Now, second situation:
7. I reverted back to 1.4.2 with the img file from this post: http://forum.xda-developers.com/showthread.php?t=1663836
8. But the thing is that I want to try 1.4.3 again
9. I downloaded official update from B&N and put it onto the SDCard
10. It boots and progress bar starts to move but at some point (25% of bar) it shows me exclamation icon with '!' and says "Please restart your device and try again..."
What is this issue and how it can be fixed?
Thanks in advance.
Honestly, I have had similar issues with the play store and my Nook on 1.4.3 but if you want to block OTA updates more effectively, I have been told that the updater cannot run if you have CWM flashed rather than the stock recovery image. When I screwed my Tablet up I found that I couldn't get it to load the acclaim_update.zip or any update files until I reflashed the stock recovery image rather than CWM.
titanshadow said:
Honestly, I have had similar issues with the play store and my Nook on 1.4.3 but if you want to block OTA updates more effectively, I have been told that the updater cannot run if you have CWM flashed rather than the stock recovery image. When I screwed my Tablet up I found that I couldn't get it to load the acclaim_update.zip or any update files until I reflashed the stock recovery image rather than CWM.
Click to expand...
Click to collapse
Can you share the links or files that get your nook back to normal state?
I've been reading and reading a lot the forum but still miss something important. Step-by-step guide would be much appreciated, if possible.
I have found the same problem. When I run CM7 on the NT from an SD card, I have no app compatibility issues. But when I run from rooted stock 1.4.3, I get the app compatibility error. I even tried pasting the build.prop file from CM7 into 1.4.3 but that did not correct the problem. The same apps are coming up as not compatible. What else is the Market looking at to determine compatibility?
Nook Color
Eustace2 said:
I have found the same problem. When I run CM7 on the NT from an SD card, I have no app compatibility issues. But when I run from rooted stock 1.4.3, I get the app compatibility error. I even tried pasting the build.prop file from CM7 into 1.4.3 but that did not correct the problem. The same apps are coming up as not compatible. What else is the Market looking at to determine compatibility?
Click to expand...
Click to collapse
This was actually a fix for Nook Color... to modify the build.prop. If you copy/pasted the entire build.prop I would think it would work.
One other thing to do is
1.) manage google play
2.) clear data
3.) uninstall updates
4.) manage google market
5.) clear data
6.) manage google services framework
7.) clear data
8.) reboot
This didn't always work and I had to do this a couple time. Not sure if which step made a difference or what order but it eventually worked. And I could see as many apps as my Captivate (Galaxy I).
Anyway, again, this worked for Nook COLOR and not Tablet. Or at least I havent figured Table yet. If you figure it out. Let me know.
My recent attempt was to copy the build.prop from Nexus and I got black screen after start up. Now I had to unbrick my device and I'm back to square one.
Good luck.. Keep me posted!!!!
@rtabasco - Good plan, but it didn't work. Even when I uninstalled the update and just used the Market app. Looks like 1.4.3 may have changed something other than the build.prop file. I'll keep poking around. It would help if the Play Store would provide a little more detail about the compatibility issue.
This just gets even more strange...
Restored with 1.4.2 image from http://forum.xda-developers.com/showthread.php?t=1663836 and Google Play (after root with sdcard method) says "FIREFOX is incompatible..."
Also tried to restore with NT_stock_1.4.2_Ribbon_Root_B&N.zip from http://forum.xda-developers.com/showthread.php?t=1494367 and Google Play still says "FIREFOX is incompatible..." Besides 'Go Weather EX' is incompatible too - this is ridiculous.
Anyone has idea how to overcome this?
PepeladZ said:
This just gets even more strange...
Restored with 1.4.2 image from http://forum.xda-developers.com/showthread.php?t=1663836 and Google Play (after root with sdcard method) says "FIREFOX is incompatible..."
Also tried to restore with NT_stock_1.4.2_Ribbon_Root_B&N.zip from http://forum.xda-developers.com/showthread.php?t=1494367 and Google Play still says "FIREFOX is incompatible..." Besides 'Go Weather EX' is incompatible too - this is ridiculous.
Anyone has idea how to overcome this?
Click to expand...
Click to collapse
What is your DPI ? Do you have an easy ( free ) way to try 160 ? . The market is your friend.
old_fart said:
What is your DPI ? Do you have an easy ( free ) way to try 160 ? . The market is your friend.
Click to expand...
Click to collapse
I am set at 160 dpi and that didn't help.
old_fart said:
What is your DPI ? Do you have an easy ( free ) way to try 160 ?. The market is your friend.
Click to expand...
Click to collapse
You mean - can I access 'build.prop' and change DPI there to 160? I probably can, but why exactly 160?
Why not default "169.33333"? As I understand CM7 has '160'?
it took me less than a minute to find this one... please do more searching and reading... thank you !
http://www.youtube.com/watch?v=uKlO9gkmsKk
PepeladZ said:
You mean - can I access 'build.prop' and change DPI there to 160? I probably can, but why exactly 160?
Why not default "169.33333"? As I understand CM7 has '160'?
Click to expand...
Click to collapse
Apart from the issue we are discussing in this thread that we can't figure out, a lot of compatibility issues with a rooted NT could be eliminated by changing the screen DPI to 160 in the build.prop file. My guess is that most of the apps were written for phones with 800x480 displays (or other dimensions that are easy multiples of 800x480). Making that change had worked for me to get access to most apps I wanted until this most recent problem that has been caused by changes in 1.4.3 or in the Play Store, or both working together.
Eustace2 said:
Apart from the issue we are discussing in this thread that we can't figure out, a lot of compatibility issues with a rooted NT could be eliminated by changing the screen DPI to 160 in the build.prop file. My guess is that most of the apps were written for phones with 800x480 displays (or other dimensions that are easy multiples of 800x480). Making that change had worked for me to get access to most apps I wanted until this most recent problem that has been caused by changes in 1.4.3 or in the Play Store, or both working together.
Click to expand...
Click to collapse
Thanks for explanation. I looked in build.prop from CW7 and DPI there is set to 160. I will try and report if this solved at least firefox problem.
old_fart said:
it took me less than a minute to find this one... please do more searching and reading... thank you !
http://www.youtube.com/watch?v=uKlO9gkmsKk
Click to expand...
Click to collapse
Thank you for video, but I was not asking how to edit text document, but rather what this change will give me.
Well, BNs build.prop has separate settings for X and Y dimensions. Following the logic, it does not matter if DPI is set via one command or via two... Anyway, simply changing to 160 DPI and rebooting did not help me with firefox compatibility in play store as well as other apps that were noted to show incompatible.
Any other suggestions and ideas would be very much welcome!
Related
Hi all,
Well for everyone who want's to have the Google apps like:
Android market
Youtube
Gmail
etc.
Here is a link to a share where the gapps4archos can be downloaded.
http://code.google.com/p/archos-apps-installer/downloads/list
INSTALL INSTRUCTIONS:
WARNING: You cannot install this appInstaller if you installed gApps4Archos or any other gApps installer. Anytime you switch appInstaller programs, you MUST reset your device back to stock. If you've NEVER installed ANY market/gApps installer, then your good... no need to reset.
NOTE: If you've ONLY used my appInstaller, then you can REMOVE the old files using my app and re-install the apps at the same time, then REBOOT.
1) Download - http://code.google.com/p/archos-apps-installer/downloads/list
2) Copy download to your device via USB (if you didnt download directly using your Archos)
3) Use 'Files' app to locate gAppsInstaller, then execute/install it
4) Choose install packaged apps or choose to install your own packaged 'apps.zip' file located on the internal drive (not sdcard)
4a) There maybe a short delay after you tap an install button (its installing and you'll be notified when its done, about 5-10 seconds)
5) REBOOT!!
6) Follow the Market FIX instructions below
MARKET FIX:
This will get you most missing apps from the market, except some "protect market apps"
Setting-->Manage Applications-->All-->Market (Clear Cache then 'Force Stop' -- DO NOT clear data)
Setting-->Manage Applications-->All-->Google Services Framework (Clear data then 'Force Stop')
REBOOT again
Market Fix video: http://www.youtube.com/watch?v=7l-nySibzeA&feature=player_embedded#!
If you do this correctly you will find most missing apps like 'Copilot Live USA' in the Market. However, some apps will not show because they are "protected" Market apps. These include 'NY Times'. Google search "android protected market apps" if your not familar.
NOTE: The latest version of GMAIL and Youtube can be downloaded in the market...
Thanks to our friends from the archosfans.com forum
Thankyou for this, I have seen how much work you have put into it. Tried gAppsInstaller_v3.apk this morning and seems to be working well, no FC's etc so far...
(edit)Oppss ment to say thankyou Kenyu73 for the app and thanks Dreetje for posting, thought you was Kenyu under a different name...
supagforce said:
Thankyou for this, I have seen how much work you have put into it. Tried gAppsInstaller_v3.apk this morning and seems to be working well, no FC's etc so far...
Click to expand...
Click to collapse
Well i didn't made it, Kenyu73 did make it It makes my device complete, really love the Archos device!
Thanks! I've looked at these instructions a dozen times on ArchosFans and always missed that market was clear cache not clear data and never figured out why it didn't work right for me. With the latest gapps I'm now seeing most everything. Awesome guide!
Edit: For some reason when I use this installer however, TweetDeck will not run properly. It always Force Closes once I've signed into my account and I cannot fix it. This is one of my favorite apps. If someone could figure this out I would appreciate it.
Edit 2: This installer causes a ton of apps not to launch in my experience thus far. TweetDeck as mentioned, Moblox, Angry Birds, they all just FC or hang endlessly. I'd still recommended the other installer with the same steps outlined in this post.
Stupid question but does "reset your device back to stock" mean anything else than a reboot? Like an Android reset or something?
g00ner said:
Stupid question but does "reset your device back to stock" mean anything else than a reboot? Like an Android reset or something?
Click to expand...
Click to collapse
from recovery or from menu, not reboot
thanks for the advise on market acces update, now finally updated gmail apk
I have the Google Marketplace up and running and for the most part it works wonderfully. My biggest issue are protected applications I use on my HTC EVO aren't showing up and some of these application I really use / enjoy. Some of these are:
1) BatteryView
2) Battery Watch
3) Splash ID!
4) Monster App Pro (I'm using the non-Pro right now)
I've been trying to add the "Market Access" application to the mix to help me with this issue, but thus far can't get z4root to work. Oh, it says it was successful, but none of the programs that need root can get it from the Super User application.
I can live without these protected applications, they are simply nice to have -- except Splash ID!, which IMHO, is necessary to protect my development personal, professional, and development information. I was able to get a work around for Splash ID, for which I'm thankful.
Bert Moshier
Excuse my ignorance, but how is this at all new? There's been a gapps hack available for every Archos device for quite some time now. It's always been readily available on ArchosFans.com.
MidwestDrummer said:
Excuse my ignorance, but how is this at all new? There's been a gapps hack available for every Archos device for quite some time now. It's always been readily available on ArchosFans.com.
Click to expand...
Click to collapse
It's a different version which allows for more flexibility, especially for updating the two most useful core apps.
MidwestDrummer said:
Excuse my ignorance, but how is this at all new? There's been a gapps hack available for every Archos device for quite some time now. It's always been readily available on ArchosFans.com.
Click to expand...
Click to collapse
It also has less apps in it, saving space for where the apps are installed, especially since Archos only provided around 275~ MB of space for app installation
And not all apps can move to sd card so any space is helpful
All we need now is the Samsung Galaxy Tab email app ported over. If anyone has any idea please share.
Thanks for posting the info for my gAppsInstaller. I've been away from the game for a few days now doing housework "mods" (=
The only issue remaining that I'm aware of with this app is a certain sub-set of apps that FC (AutoZone, OSMonitor and a few others mentioned in this thread. I haven't had time to research, but whatever the gApps4Archos is doing is making these work ok... I'm thinking its some registration of dll files ('so' files perhaps). I do know it copies 4-5 .so files into the froyo/system directory, but i'm not sure right now if I need to do some type of '.so' file registration with them.
If any linux guru's out there know of something I need to do specifically with these (besides copying them to the '/froyo/system' directory, please let me know.
libspeech.so
libvoicesearch.so
libzxing.so
libimageutils.so
libinterstitial.so
kenyu73 said:
Thanks for posting the info for my gAppsInstaller. I've been away from the game for a few days now doing housework "mods" (=
The only issue remaining that I'm aware of with this app is a certain sub-set of apps that FC (AutoZone, OSMonitor and a few others mentioned in this thread. I haven't had time to research, but whatever the gApps4Archos is doing is making these work ok... I'm thinking its some registration of dll files ('so' files perhaps). I do know it copies 4-5 .so files into the froyo/system directory, but i'm not sure right now if I need to do some type of '.so' file registration with them.
If any linux guru's out there know of something I need to do specifically with these (besides copying them to the '/froyo/system' directory, please let me know.
libspeech.so
libvoicesearch.so
libzxing.so
libimageutils.so
libinterstitial.so
Click to expand...
Click to collapse
There is the guru! I thought i share it with the XDA members
Your question: I searched for an explenation about registering the .so files and found this link: http://users.actcom.co.il/~choo/lupg/tutorials/libraries/unix-c-libraries.html#shared_dlopen
just checking - these instructions are for 2.2 only ?
-thanks for posting this in a clear easy to follow way and thanks to kenyu73 for all the work
- Stephen
kenyu73 said:
Thanks for posting the info for my gAppsInstaller. I've been away from the game for a few days now doing housework "mods" (=
The only issue remaining that I'm aware of with this app is a certain sub-set of apps that FC (AutoZone, OSMonitor and a few others mentioned in this thread. I haven't had time to research, but whatever the gApps4Archos is doing is making these work ok... I'm thinking its some registration of dll files ('so' files perhaps). I do know it copies 4-5 .so files into the froyo/system directory, but i'm not sure right now if I need to do some type of '.so' file registration with them.
If any linux guru's out there know of something I need to do specifically with these (besides copying them to the '/froyo/system' directory, please let me know.
libspeech.so
libvoicesearch.so
libzxing.so
libimageutils.so
libinterstitial.so
Click to expand...
Click to collapse
you tried to ask m4rk3t about this?
czesiu said:
you tried to ask m4rk3t about this?
Click to expand...
Click to collapse
I dont think he created the original gApps4Archos package, he only de-compiled it, added the updated the apps with the newer 2.2 market then vanished.
I think he dropped of the radar after he did the re-package of that app.
m4rk3t
Archos Novice
Posts: 6
Joined: Thu Nov 26, 2009 4:43 pm
my youtube wont update to new one in market and my youtube just fc
tmacgarris6727 said:
my youtube wont update to new one in market and my youtube just fc
Click to expand...
Click to collapse
My app doesn't include youtube (i required you to get it from the market) so I'm not sure why you say it wont update.
Did you use this one or gApps4Archos?
yes i use that and youtube comes with it but it keeps fc and it wont download from market
I want to share the versions of the Market and various Gapps that work for me on Sam's HC EMMC v4.0, 2nd ed. build {Huge props to him, deeper-blue, and others who got HC working on the NC. Without their heroic efforts, I'd be working 4 jobs right now trying to save up to buy a Xoom}
This script is the first one I run after doing a fresh build of HC EMMC, but you should also be able to do it on a stale version of HC as well.
Maps is version 5.0
While I am confident that these files will work for you as well, please remember, individual results may vary---use at your own discretion.
NOTE: The 'GoogleServicesFramework.apk' file in the attached .zip will remove the blue wi-fi icon from Sam's initial build. If you prefer the blue icon over a working Market (My Apps), then DO NOT proceed with the installation!
That being said, please do the following before trudging ahead:
+ Perform a full backup using your bootable CWR SD card [see samuelhalff's thread for instructions on this: http://forum.xda-developers.com/showthread.php?t=947071]
+ Backup each of the original files on your NC that will be replaced by the script
+ See #1 & #2 above...you've been warned
Instructions for Installation:
Extract the files contained within the attached .zip into the same directory as your ADB directory (where your 'adb.exe' file lives). Mine was located here on my computer: C:\android-sdk-windows\platform-tools
Connect your NC to your computer, ensuring ADB is working properly ahead of time
Double-click on the file 'HoneyGAppInstall.cmd' and the script to install the new apps will run
The script will reboot your NC upon completion
Once your NC comes backup from the reboot, you can then login to the Market, select "My Apps" and they should show up right away.
I have also attached the 'build.prop' file I use. This modified file allows me to see tablet apps (NY Times Tablet, More Good News Tablet) and also I can see/download/install both Angry Birds games.
NOTE: The ro.sf.lcd_density is set to 140 in my file. This is not friendly to Zeam and needs to be set to at least 150 for that launcher to work without Force Closing in Portrait mode.
Good luck and let me know if any issues.
EDIT: For those running a build that is not new and already has the original Market setup, would be best to do the following steps after running the Gapps script:
1.) Settings > Manage Applications > All > Market: Clear Cache then Force Stop -- DO NOT Clear Data2.) Settings > Manage Applications > All > Google Services Framework: Clear Data3.) Reboot
~ Razir
Would it be possible to flash the market zip through recovery? Looks like it would work in theory.
I can see all the installed apps on My Apps. Thanks for these files. But I have one problem. My Nook no longer shows up on market.android.com. Anyone else have this problem?
Is Youtube working?
JaysFreaky said:
Is Youtube working?
Click to expand...
Click to collapse
HQ videos don't work. If you disable HQ it works.
Vasanth said:
I can see all the installed apps on My Apps. Thanks for these files. But I have one problem. My Nook no longer shows up on market.android.com. Anyone else have this problem?
Click to expand...
Click to collapse
I don't use that site much, but I did just check it out of curiosity.
I verified it was working by going into: My Market Account > Settings tab. I can see "LogicPDZoom2" with last access of today's date.
bdcrim said:
Would it be possible to flash the market zip through recovery? Looks like it would work in theory.
Click to expand...
Click to collapse
Not being a dev, I don't know how to compile the files I attached and make them flashable.
However, I can tell you that I do have a black-themed Market by Darkslide for my DroidX that is flashable via CWR, but sadly, it did not work for me. I tried it by booting to the CWR SD card. Would have been nice to have the black-themed version.
I also have a flashable version of Zeam, but again, did not work for me.
Now, I have not tried it by going into CWR using Sam's method with his built-in utility. This is because I have not really been able to get that to work 100% of the time and also because it is just so easy to get to CWR via the bootable SD card that I have not really messed with it too much.
I can post the black-themed Market if someone smarter than me wants to take a look at it...might prove useful. I am just not sure if a DX file can be used on the NC
Just let me know and maybe we can figure it out together.
Vasanth said:
HQ videos don't work. If you disable HQ it works.
Click to expand...
Click to collapse
And you have to be pretty fast at disabling that little "HQ" icon in the top-right corner of the screen. From my experience, has to be almost instantaneous by the time it appears on the screen or the video won't load.
360Razir said:
I don't use that site much, but I did just check it out of curiosity.
I verified it was working by going into: My Market Account > Settings tab. I can see "LogicPDZoom2" with last access of today's date.
Click to expand...
Click to collapse
Thanks for checking. I did mess around with the build.prop you provided. I think I messed something up. I will use the file you provided without any changes.
Thanks.
Not being dev minded, I don't know how much help I would be. I was able to extract the apks from the zip file and move them with root explorer, changed permissions and it appears to be holding. Have rebooted twice and still good. Your script in the zip file would not work with cwr since it is windows based, I think. I don't know if the apks would install in recovery without a script, seems like it would not. Anyway, thanks for putting this together. Market works with the apks and the build. prop seems to have helped as well. Thanks again.
360Razir said:
Not being a dev, I don't know how to compile the files I attached and make them flashable.
However, I can tell you that I do have a black-themed Market by Darkslide for my DroidX that is flashable via CWR, but sadly, it did not work for me. I tried it by booting to the CWR SD card. Would have been nice to have the black-themed version.
I also have a flashable version of Zeam, but again, did not work for me.
Now, I have not tried it by going into CWR using Sam's method with his built-in utility. This is because I have not really been able to get that to work 100% of the time and also because it is just so easy to get to CWR via the bootable SD card that I have not really messed with it too much.
I can post the black-themed Market if someone smarter than me wants to take a look at it...might prove useful. I am just not sure if a DX file can be used on the NC
Just let me know and maybe we can figure it out together.
Click to expand...
Click to collapse
bdcrim said:
Not being dev minded, I don't know how much help I would be. I was able to extract the apks from the zip file and move them with root explorer, changed permissions and it appears to be holding. Have rebooted twice and still good. Your script in the zip file would not work with cwr since it is windows based, I think. I don't know if the apks would install in recovery without a script, seems like it would not. Anyway, thanks for putting this together. Market works with the apks and the build. prop seems to have helped as well. Thanks again.
Click to expand...
Click to collapse
You are most welcome and yes, the .zip is not flashable for CWR. XDA will only allow for certain types of files to be uploaded and .zip is one of them, so easier for me to go that route.
Files in the .zip are meant to be extracted into the folder where ADB.exe exists in order for the script to work correctly. As stated in the OP, I have only tested this on a Win7 box, as that is the only platform I have access to at the moment.
Root Explorer will also work, as you already know. So, for those who want to go that route, it is certainly an option. Glad things are working well for you at this point. Thanks for your feedback!
I'm just checking. These are the Android 3.0 gapps from the XOOM, not the 2.3 gapps? (Sorry I'm a little tired and don't have the emmc version installed, I run the SD card version, so I can't test ATM)
kdb424 said:
I'm just checking. These are the Android 3.0 gapps from the XOOM, not the 2.3 gapps? (Sorry I'm a little tired and don't have the emmc version installed, I run the SD card version, so I can't test ATM)
Click to expand...
Click to collapse
2.3, not 3.0.
Just transferred all the apps and the build.prop to a stale build of eMMC 2nd (3 days of use) and other than using root explorer followed the instructions to a T. My apps seemed to work but not thinking I updated maps in the market and now it doesnt work. Tried to uninstall updates in market (didnt seem to even finish the process), replace with my original apk, replace with apk from your zip here, clearing cache and data. Nothing seems to bring it back to life. Anyone else have this problem?
P.S. I think the white wifi icon looks nice.
Sent from my LogicPD Zoom2 using Tapatalk
Just used a combination of Root Explorer and ADB (for the chmod) to use your mod and everything is working great. Thanks a ton for posting this!
Only change I had to make was the LCD Density in the build.prop since I want to use Zeam. I tried using the default launcher but it is so laggy, I just can't.
lospulpo said:
Just transferred all the apps and the build.prop to a stale build of eMMC 2nd (3 days of use) and other than using root explorer followed the instructions to a T. My apps seemed to work but not thinking I updated maps in the market and now it doesnt work. Tried to uninstall updates in market (didnt seem to even finish the process), replace with my original apk, replace with apk from your zip here, clearing cache and data. Nothing seems to bring it back to life. Anyone else have this problem?
P.S. I think the white wifi icon looks nice.
Sent from my LogicPD Zoom2 using Tapatalk
Click to expand...
Click to collapse
Did you get your Maps back and working yet? If not, PM me and we can work on it together, offline. And if we can get it to work, we can post the "method to our madness" here in case others have done the same.
911jason said:
Just used a combination of Root Explorer and ADB (for the chmod) to use your mod and everything is working great. Thanks a ton for posting this!
Only change I had to make was the LCD Density in the build.prop since I want to use Zeam. I tried using the default launcher but it is so laggy, I just can't.
Click to expand...
Click to collapse
Glad all is working for you and that is a good point...I will update the OP to let folks know the build.prop has the LCD Density set at 160, which is not Zeam portrait-mode friendly.
Thanks for the feedback!
Okay, just downloaded the new Amazon Appstore and installed Angry Birds Rio (the first Free App of the Day). Force Close... so I tried both 140 and 160 LCD Densities and still no luck. Tried both of the other Angry Birds (original & seasons) and they force close on all three densities as well.
Any thoughts on why you are able to run them but I can't using the same build.prop? The only thing I had changed from your build.prop was the LCD density, but as I said, even changing it back to match your original setting doesn't make Angry Birds work.
Angry Birds and Angry Birds Seasons work for me. I had to move them to the internal memory. I already tried moving Rio to internal memory, however it still FC's. I can get the game to almost start, but when it's time to start shooting, it FC's. I haven't tried changing the LCD density.
Same issue here with Rio. Tried internal and no dice. Doesn't run at all when on SD.
I installed vegantab and followed the directions to get the full marketplace on my gtab. However when i search for certain app they do not show up. At first i just thought they were apps that weren't compatible with android tablets but this does not seem to be the case. A couple of the apps are facebook and twitdroid. I know facebook came preinstalled on tap n tap so it should not be a compatability issue. Can someone please tell me what may be causing this?
Thanks in advance
Have you tried this post? It worked for me when I thought I had the full market.
http://forum.xda-developers.com/showthread.php?t=865245
This happened to me too. Even after I did the market fix as described in the ROM install thread. The previous poster has pointed you in the right direction, but more specifically these are the exact steps that fixed me. I take no credit for this other than finding it and passing it along.
Step 4.
Go into Settings - Applications - Manage Applications - Market - Clear CACHE - Force Stop
(For TnT/TnT Lite... Settings - Applications - System Applications)
Step 5.
Press back once - Google Services Framework - Clear DATA - Force Stop
Step 6.
Go back to your home screen and open up the market. You should get an error. If not, redo steps 4 and 5 until you do.
Step 7.
Reboot your device. After it starts back up let it sit for a minute or two to let things in the operating system normalize. Open the Market. Reboot your device.
Step 8.
Open the market again and enjoy. You should now have Flash and the Android Market.
I've always thought that "Full Market" didn't mean everything available in the market, but everything that the market believes it can install on your device. I've always double-checked by going to the web market and trying to "push" the app to my device to see if it is compatible.
Or is there something on the device that identifies itself on the market as to what it can have installed?
I wish there was a tablet market separate from phones. It would make things much easier.
MechAniX.one said:
I wish there was a tablet market separate from phones. It would make things much easier.
Click to expand...
Click to collapse
but then you wouldn't be able to see the phone apps that work well on tablets. I would assume that most widgets are cross compatible. Even when going to iTunes from an iPad, they have the 'iphone apps available for you.
in the infancy of android tablets, if we could ONLY see tablet only apps, we'd all be limited to about 50-100 apps, most of which not all of us would have a purpose for.
I'm having a similar problem, even after following the steps outlined in the Clockwork/ROM thread. Not sure if it varies with the rom as I was able to get Zeam Launcher with the Adam rom, but not with TNT lite.
Following along to see if there are other suggestions...
So I had followed the steps when I originally flashed Vegan 5.1.1 and the Market didn't show up Apps, like Facebook for example.
For the heck of it I tried it again just now, after I've been using my tablet for a while, and now the Market works fully! I still can't see tablet Apps like the CNN one, but now I have access to lots of Apps I didn't before.
Another resource you could check would be 4shared.com. Search for cnn.apk or just .apk and you will see lots of other apps, not sure if they will all work, but its worth a shot.
FWIW... I ran the steps again last night (for the second time since flashing TNT lite) and got access to more apps. I was able to find zeam, but I still can't find ADW. Might try it again tonight just to see what happens.
Seems odd, but that's been my experience so far.
jacksonpt said:
FWIW... I ran the steps again last night (for the second time since flashing TNT lite) and got access to more apps. I was able to find zeam, but I still can't find ADW. Might try it again tonight just to see what happens.
Seems odd, but that's been my experience so far.
Click to expand...
Click to collapse
From my experience with three/four different ROMs is that it shows up for certain ROMs(like VeganGinger and not for others like VeganTab)
couchmonkey said:
From my experience with three/four different ROMs is that it shows up for certain ROMs(like VeganGinger and not for others like VeganTab)
Click to expand...
Click to collapse
I'm noticing that as well as I flip back and forth between adam and TNT lite.
Is there any setting that can be changed without switching ROMs that will fool the market into thinking the device is compatible with more applications?
sedrikk said:
Is there any setting that can be changed without switching ROMs that will fool the market into thinking the device is compatible with more applications?
Click to expand...
Click to collapse
If you have Root Explorer you can alter your build.prop file to set your device as olympus and that gives you a full market, or at least the fullest I've seen. The following apps show up with this change:
firefox, adw, facebook, cnn, zeam, launcher pro, dolphin hd, flash 10.2, samurai vengeance, etc.
This has worked on Vegan 5.1.1, TNT Lite 4.4, G-Harmony 2.3.3, CM7, & Calkulin's v1.1 for me.
http://forum.xda-developers.com/showthread.php?t=1020130
I used astro file manager to change that file and then reapply the market fix. Still no apps like google docs on the market. Would this be an immediate fix or will it take some time for the market to register the change?
nvm: astro didnt actually save the modified file after editing it
Using root explorer now i guess the correct procedures would be
1) change the mount to r/w from r/o
2) modify the permissions of the build.prop to allow write access
3) modify build.prop
4) restore original permisions
5) change mount back to r/o from r/w
6) rerun market fix
Am i missing anything?
Read through the linked thread a bit more and seems that is all that is needed. Thanks for the point in the right direction.
This is what I do. Using Root Explorer I change the mount from R/W to R/O then alter the build.prop from Vega to olympus on that one line & then switch back to R/W. I don't change permissions. Then I go to settings>applications>market to clear market cache & then force stop. Next I go to settings>applications>google services framework to clear data & then force stop. Reboot. Then have full market. Always works for me.
I'm looking a bit more at rooting via manual nooter on OS 1.4.1.
As of now, the Android Market is not working
In my hands, the BN shop is also not working. Books cannot be downloaded. (The reader does work, though, so you can shop and then download to your PC, then push the files in manually if you like.)
Together, those two elements not working argue against rooting 1.4.1 for anything other than study and development, I think.
- 1.4.1 installs on a device which had already been rooted (this device is rooted but not overclocked.)
- boot from a manual nooter 4-5-18 disks works
- after applying MN 4.5.18 and the APK enabler, the device booted. Root was retained and SU works fine (I was able to use adb wireless)
- install via ADB works
Other things to be aware of:
- this is not a Gingerbread release for the NC.
- the home button behavior is changed a LOT. Home Catcher for the Nook Tablet will also work here, though.
- the device automagically snarfs Google contacts if it's registered to a gmail address, it seems. There is no warning on that. I think that behavior is a Big Effing Problem.
About to try hopefully it works. I know I couldnt install update on 1.3 with CWM going back to complete stock and then update and then MN.
Yes, if CWR is written to your boot, you cannot install BN updates.
It might be possible to use a flashable 1.3 installer to write only /boot, reboot, then update to 1.4.1. I know there is a flashable 1.3, but I do not know where it lives.
roustabout said:
Yes, if CWR is written to your boot, you cannot install BN updates.
It might be possible to use a flashable 1.3 installer to write only /boot, reboot, then update to 1.4.1. I know there is a flashable 1.3, but I do not know where it lives.
Click to expand...
Click to collapse
Yeah I went back to 1.3 stock and then to 1.4.1 update.
It would be nice if some one conforms about Market
"It would be if some one conforms about Market"
Yeah, wouldn't it?
I'm figuring from the lack of screaming it's probably working.
Market is up. Some apps still missing. Having a bit of problem with Zeam launcher. Nook launcher is taking control.
Straight from my ICS i897 Sonic Screwdriver!!!!!
So from a rooted 1.3.1 you:
Use CWM to install a vanilla 1.3 ROM, then update to 1.4.1 via B&N download, then root using only 4.5.18? I seem to remember to root 1.3.1 you needed to root with 4.5.16 and then 4.5.18.
I have been able to use 4-5-18 without any problems on both 1.2 and 1.3.
You may not even need to install the vanilla ROM - you may well be able to install to a rooted device, so long as you have not meddled with /boot, either by installing a CWR boot internally or by overclocking.
My fast experiment this morning involved updating a rooted 1.3, then rooting that resulting 1.4.1.
Anyone check to see if it will still boot from an SD card, just want to confirm before update, but because it is still rootable I can always downgrade.
Edit: I am in the process of updating as I type this, I will post the results in case anyone else needs them.
tsukisan said:
Anyone check to see if it will still boot from an SD card, just want to confirm before update, but because it is still rootable I can always downgrade.
Click to expand...
Click to collapse
Others have tested and confirmed, but that's not something they can change on this device with a software update anyway
Good to know, I hadn't seen it yet but my testing confirms this, thanks for the reply
MentalDragon said:
Market is up. Some apps still missing. Having a bit of problem with Zeam launcher. Nook launcher is taking control.
Straight from my ICS i897 Sonic Screwdriver!!!!!
Click to expand...
Click to collapse
In my case the Market runs but it's totally useless: I can't see my apps, it doesn't find most of what I want to install and when it does I can't install anything (it just goes back to the Apps menu). So it totally sucks since the B&N market is really lame!
nookerrooter said:
So from a rooted 1.3.1 you:
Use CWM to install a vanilla 1.3 ROM, then update to 1.4.1 via B&N download, then root using only 4.5.18? I seem to remember to root 1.3.1 you needed to root with 4.5.16 and then 4.5.18.
Click to expand...
Click to collapse
For whatever reason, many Nook Colors that come stock with 1.3 installed just bootloop if rooted with 4.6.16, even if rooted first with 4.5.18. I can confirm this with a new NC purchased for my girlfriend's mom. Runs OK if just rooted with 4.5.18, except for it having the ancient market. Haven't been able to update the market yet, though gmail will update itself.
Updated to 1.4.1 (had to return to stock 1.3 to install the update, even without CWM flashed), using homecatcher to overcome the new "n" button "feature", but market is hit and miss. Was able to download and install Astro, but Titanium Backup doesn't want to download and install. I'll try sideloading it later.
What's the new n button feature? Is it possible to make a flashable update, like with 1.2 and 1.3?
RSchmauk said:
What's the new n button feature? Is it possible to make a flashable update, like with 1.2 and 1.3?
Click to expand...
Click to collapse
If you press it once, it brings up the B&N "dock" that used to be at the bottom of the screen. If you press it twice, it brings up the B&N launcher.
Correction, I thought I was able to download Astro from market, but apparently I didn't. Now I've got no way to sideload apps, which makes this pretty useless...
magicland said:
If you press it once, it brings up the B&N "dock" that used to be at the bottom of the screen. If you press it twice, it brings up the B&N launcher.
Correction, I thought I was able to download Astro from market, but apparently I didn't. Now I've got no way to sideload apps, which makes this pretty useless...
Click to expand...
Click to collapse
ADB commands are your friend! Pretty much as long as you can enable ADB you can sideload with zero issues.
c0ldburn3r said:
ADB commands are your friend! Pretty much as long as you can enable ADB you can sideload with zero issues.
Click to expand...
Click to collapse
I realize this, but this nook is a gift for my girlfriend's mom, who lives out of state, and I know there's no way she's going to sideload everything using ADB... I need to get her a working market, even if I've got to go back to 1.3 and disable the update.
Ended up using 4.5.18 on my stock 1.3 NC. ADB Sideloaded in the Kindle app and a couple others and used the Nook App Manager to drop icons out on the main stock launcher page. I was really looking to add teh Kindle app so I could read all my purchased books on a single device, so I'm quite content. I'd like to see better market, etc but it's not a dealbreaker for me.
Just in case someone follows this thread, rooted 1.4.1 is working well now. manualnooter-5-12-18.zip does it for ya.
Market works. You can add non-B&N apps to the B&N app and home screens using Nook Color App Manager. Putting the Kindle app on there is no problem. Netflix, HBO GO and Max GO work. Hulu Plus refuses to run on the device. B&N subscriptions download and update the dock. B&N enhanced content (e.g. Wired magazine) work fine.
If non-techie friends and family want an enhanced B&N Nook Walled Garden experience, this will do it!
It seems that since Google updated Market to Google Play, I can't access or install a bunch of apps that I want.
The two that bother me right now are 'Lookout Mobile Security' and 'Firefox for Android'. If I search Google Play, neither show up in search results. If I use the browser and go directly to either Firefox's or Lookout's site to install, I get redirected to Google Play and the Install button in both cases is grayed out and nothing happens.
And I'm very unhappy that I can no longer download the apks using my computer and side load/install it.
????????????
I'm on a standard Nook Color, with the newest stable release running in EMMC:
Android version: 2.3.7
Kernel version: 2.6.32.9
Mod version: CyanogenMod 7.1.0-encore
Build No: GWK74
Everything else works fine and I have no other problems or complaints.
Can someone give me some things to try and get this working???
(is this the correct forum for this type of problem??? or can someone please direct me to the right place?? I didn't want to post this to the development forum.)
Same problem here, with last build of Mirage.
I modified the build.prop file, identifying as HTC Vision.
Playstore (in desktop) now shows HTC Vision as my device.
But still no full access to market with my nook, I can't see gmail app, for example.
I tried again to change build.prop with Nexus S as device.
Playstore has not even noticed the change.
Any hint ?
filigi said:
Same problem here, with last build of Mirage.
I modified the build.prop file, identifying as HTC Vision.
Playstore (in desktop) now shows HTC Vision as my device.
But still no full access to market with my nook, I can't see gmail app, for example.
I tried again to change build.prop with Nexus S as device.
Playstore has not even noticed the change.
Any hint ?
Click to expand...
Click to collapse
I don't have your Rom, but never had problems with Nightly Cm7 or needed to change build.prop file.
Did you try again with flashing recommended gapps for your ROM?
Unleashed from my Revolutionized Desire HD
Yes, I flashed again gapps after having wiped cache and data, and restored stock build.prop.
Now market works again.
I think I lost full market access when I changed the resolution, using LCD resolution, though this app doesn't seem to change anything in build.prop.
Maybe the solution is there: http://forum.xda-developers.com/showthread.php?t=1580827
The market has always been weird on my Nook. It randomly decides to not allow me to install some apps one day, then will allow me to install the next. Not sure what the cause is either. Just says the device is not compatible.
filigi said:
Yes, I flashed again gapps after having wiped cache and data, and restored stock build.prop.
Now market works again.
I think I lost full market access when I changed the resolution, using LCD resolution, though this app doesn't seem to change anything in build.prop.
Maybe the solution is there: http://forum.xda-developers.com/showthread.php?t=1580827
Click to expand...
Click to collapse
Any report of a fix yet? My Nook has also weirded out after changing LCD resolution!
Taken from the samiam's old cm9 thread
If you notice that some apps are missing from the market, this may be due to the fact that these ICS builds for the nook do not include support for apps which request phone permissions. Although this ideally would be fixed by developers not requesting phone permissions for their app unless it absolutely needs to be phone-specific, you can also fix it by flashing the telephony-permissions-fix.zip file located in the misc folder. You will likely want to flash this file immediately after flashing your rom.
Click to expand...
Click to collapse
greenmuggy said:
Taken from the samiam's old cm9 thread
Click to expand...
Click to collapse
Helped with a few but not what I was hoping... bit it did help
Sent from my SPH-D700 using XDA
Anything other than the standard LCD densities will not allow access to some applications. There is a list somewhere that I had bookmarked, but must have deleted it. If you search for the densities that are standard (MDPI, HDPI, etc) and set it, it may help.
Yeah, these missing apps are most likely a result of a non-standard LCD Density. To fix this, you can install a hardcoded 160 dpi play store that does not run an LCD Density check. If for any other reasons you can't access apps (different country or whatever), this hardcoded play store will let you.
See the thread with DL links here: (http://forum.xda-developers.com/showthread.php?t=1551118)
Make a backup of your vending.apk in /system/app/, and then rename the hardcoded play store to vending.apk. Place the hardcoded vending.apk in system/app/, change permissions to rw-r--r--, and reboot. Should work right away. If not, follow the additional instructions in the link above.
I take no credit nor liability for the results of following these instructions. Make backups of every file you replace and you should be alright.