The problem that I am having is that every time my phone connects to my truck (Ford sync) the music app opens and it starts playing. So I stop it and shut down the music app, but after I hang up from a call it starts back up. The first few days I had it there was no problem cause I didn't have any music on it yet, but now it does.
I have even gone as far as installing ATK and completely stopped that task, just to have it start up again after I hang up from a call.
Also, does anyone know if it is possible to get audio data over bluetooth?
I would like to see what song is playing over bluetooth on my dash.
I recently purchased some Nokia BH-505 bluetooth headphones. I like them and I primarily use Pandora to listen to music. I'm having a periodic issue where the headphones sort of disconnect and quit playing music. This only happens when I choose to turn the screen off. If I keep the screen on, I never have any disconnect issue. Pandora is happily still streaming music though, and if I power off the headphones, the phone/pandora realizes that it's no longer connected and starts playing through the speaker of the phone (that's why I say "sort of" disconnecting). If I power the headphones on again, they connect, pandora pauses, then I can resume play and then a short time after the condition happens again (if I turn the screen off). I imagine it's some sort of memory related thing because it seems if I make sure I have no programs running in the background things seem to work as desired. I haven't found any sort of setting to tweak, and neither Pandora or any bluetooth like program is in an autoclose list.
Anyone have any ideas on any workarounds to this issue?
Hello all,
I am having a problem getting the phone part of my new DNA to work with blue-tooth in my car. The A2DP works great but after I answer or make a phone call with my Car Stereo (eclipse 3200) I cant hear anything and they cant hear me. If I use the dial-pad on the phone to make a call I hear the tones from the button pushes but nothing after the call is connected.
Thanks for any help or suggestions
chooven said:
Hello all,
I am having a problem getting the phone part of my new DNA to work with blue-tooth in my car. The A2DP works great but after I answer or make a phone call with my Car Stereo (eclipse 3200) I cant hear anything and they cant hear me. If I use the dial-pad on the phone to make a call I hear the tones from the button pushes but nothing after the call is connected.
Thanks for any help or suggestions
Click to expand...
Click to collapse
I have a Sony bluetooth player in my car and it will not even recognize the device.
Edit: It was a user error on my part. I have successfully paired and it works flawless.
xentheosx said:
I have a Sony bluetooth player in my car and it will not even recognize the device.
Click to expand...
Click to collapse
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
eleazar123 said:
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
Click to expand...
Click to collapse
I think the phone just has bluetooth problems in general, or BT4 is just not 100% backwards compatible. I have a Pioneer stereo, and never had any problems with any of my android devices (OG Droid, Droid X, inc2 and gNex) connecting, but when I connect my DNA, it actually crashes the phone process on the handset and it restarts (the process, not the handset). It still appears to be connected to the stereo after that, but I haven't tried making a call yet.
Stereo doesn't support BT streaming, so I can't test that. Has an SD slot, and that's all I ever use.
I'm having the same problem. My music will play for about 3 seconds, then goes silent. The car says I'm still connected, Google Music is still playing, but it mutes out. Was having fun while driving hitting the pause/play button to listen to a song 3 seconds at a time. Does anyone know if this is a OS problem, hardware problem or incompatibility, or other problem? I didn't see many posts about this elsewhere and haven't heard back from Verizon.
eleazar123 said:
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
Click to expand...
Click to collapse
Working fine for me with my Kenwood. Music does skip occasionally, but my other phones (galaxy nexus, thunderbolt) have done that too.
Sent from my HTC6435LVW using Tapatalk 2
For all of us who suffer a HTC Toyota combo and the dreaded bluetooth pause issue I believe I have found the issue and got a working solution !
From what I gather, the HTC music player sets the bluetooth player state to pause when leaving the music player and most other apps do not set it back to streaming. I found one which does, so a simple solution !
1. Start and stop a piece of music with the Fplay music player and it will reset the bluetooth player state to streaming. I put a widget on the home screen.
2. Start your other apps and enjoy streaming sound again.
3. Enjoy
Fplay
https://play.google.com/store/apps/details?id=br.com.carlosrafaelgn.fplay&hl=en
Three minute video for those who would rather watch than read.
http://www.youtube.com/watch?v=ogvHjD8Aoj4
Anyone else having weird issues with their Bluetooth? More specifically, when you play music, the metadata adds some weird 01 or 000 digits in front of the track titles? Confirmed with PowerAmp as well as Spotify. Also having static and hiccup issues with it as well. Thought it was my head unit in my car, but it is in fact the phone since it does the same thing with other cars I've tested this in.
I've been having some issues using it with my car too.
I have a aftermarket radio, but this is the only phone that does this.
When a call comes in the music is suppose to stop. It doesn't i'm getting sounds from calls and music at the same time. I would have to manually pause the music on my phone.
Another thing is, when i turn off the car. Normally the phone will automatically pause or shut down the music app when connect is lost. Not with this phone. it just keeps playing the music after loosing connection with the host.
Hoping there is a update to fix this bug. It's not a big thing but it's starting to get annoying...
Mine works fine except the app will randomly close sometimes. Pandora never shuts off. Only gmusic and spotify does. I actually love how much faster this phone connects compared to my note 4.
Sent from my LG-H901 using Tapatalk
I haven't notice any issues yet and I use bluetooth 3-4 hrs a day. I use iheart, Poweramp, PlayerPro.
I'll start looking for problems now
I love my V10. However, I use an aux cable in my car but it also connects to bluetooth. I use the aux cable because I listen mainly to a podcast through Podcast Addict and I CANNOT get so that the bluetooth opens PA by default. I am using MacroDroid which has really helped me achieve what I want. I want to plug the phone in and have PA play automatically. When I switch the source on the car stereo to Bluetooth, the music app starts playing. NOT what I want.
The biggest thing that I hate is that whenever the phone connects to the bluetooth it ALWAYS asks if I want to play through BT and Aux. It takes a second to dismiss the notification but who decided that I don't have control to tell my device that I don't prefer this and to not ask me again? Every other pop up can be dismissed with a "Don't show again". Has anyone figured out how to get rid of this or am I the only one who is bothered by it?