i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
gs2rom said:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I'm unable to do anything with it now! no power NOTHING. My batt was nearly full when it went off so i know its not the batt and even when i put cable in with batt in it still does'nt show anything on screen..
aviz06 said:
i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Click to expand...
Click to collapse
What's your ROM details?
Swyped from my Samsung Galaxy SII
Jokesy said:
What's your ROM details?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Could you doing wipe?
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
---------- Post added at 09:13 PM ---------- Previous post was at 09:08 PM ----------
Could you doing wipe?
After installing and before reboot i think you must do 3 wipes for this ROM.
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
aviz06 said:
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Click to expand...
Click to collapse
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
try download mode..
or pressing volume down and connecting it to pc at the same time.. (you´ll end up in download mode or your phone is pretty dead)
Jokesy said:
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
aviz06 said:
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
Click to expand...
Click to collapse
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with your device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Jokesy said:
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with toot device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
aviz06 said:
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
Click to expand...
Click to collapse
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
UrbanDesigns said:
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
Click to expand...
Click to collapse
Hopefully they should repair.. Thats the only option i have left.. Stupid me i only just bought it as well!
i'll keep u updated and let u know if it was repaired? i here a few peeps get similar probs when trying to update to custom firmware's and samsung do repair and send them back to their customers..:fingers-crossed:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
teror300 said:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
Click to expand...
Click to collapse
No, there is no brick bug on XWLP7
Jokesy said:
No, there is no brick bug on XWLP7
Click to expand...
Click to collapse
Oh ok, Thanks for answer.
teror300 said:
Oh ok, Thanks for answer.
Click to expand...
Click to collapse
You are welcome
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
aviz06 said:
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
Click to expand...
Click to collapse
And people say Samsung has a bad customer service, Samsung FTW
The easiest way to Root your phone is probably the Chainfire Root, which you can find here:
http://forum.xda-developers.com/showthread.php?t=1103399
It`s very important that you read the instructions there on how to Root your phone.
It´s a great method because it gives you Root and Clockworkmod in one package and you will keep your stock Kernel.
After that you can install any Rom or Kernel you want but it`s highly recomended to not install any Kernel with the Hard Brick Bug. Read this thread for more information:
http://forum.xda-developers.com/showthread.php?t=1756242
If you really want to remove the triangle there is a mod from chainfire, called TriangleAway: http://forum.xda-developers.com/showthread.php?t=1494114
but I would recommend not to do it, since people also managed to screw that up (bricking their phone), I mean is it really so disturbing to see the Triangle for 2 seconds everytime you reboot?
Good Luck
Related
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Additional Info
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Do you know what kernal you had at the time, for the phone to go off during a wipe sounds like the brick bug but I didn't think it was present in LPT. Can other members clarify please. Does your phone charge when plugged into charger?
Sent from my GT-I9100 using xda premium
satish0101 said:
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Click to expand...
Click to collapse
I'm sorry but that's your fault.
It's being said 1 million times already, that wiping your data in CWM while running stock 4.0.4 ROM with a stock kernel will BRICK your phone.
Your inability to read might have left your phone bricked.
Read through the forum next time, ask questions if you don't understand anything and I can assure you will be luckier next time.
Swyped from my Samsung Galaxy SII
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
sachidanand444 said:
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
This is a sticky thread under General section warning everyone about the buck bug. Here: http://forum.xda-developers.com/showthread.php?t=1756242
I and many others have also warned people about this bug but the unfortunate thing is that most of ask these kind of questions after the problem has occurred.
Swyped from my Samsung Galaxy SII
Jokesy said:
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Er I'm not the OP
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
Will do thanks
Sent from my GT-I9100 using xda premium
^^Not only with touch CWM but also with "temporary CWM" wjich is what you were using.
Take it to a service center as your phone now needs a motherboard replacement..and I hope you still have warranty..!
Sent from my GT-I9100 using Tapatalk 2
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
Sorry dude
You might have to send your phone to device center for repairs but if you are out of warranty or wants to try to Fix things yourself, then the advise/instructions below is for you:
-boot your phone with usb jig, if you can get to download mode, then proceed to next step
-Visit this thread: http://forum.xda-developers.com/showthread.php?t=1841099
Good luck
Swyped from my Samsung Galaxy SII
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
UrbanDesigns said:
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
Click to expand...
Click to collapse
Brick bug is only present on ICS 4.0.4.
ICS 4.0.3 is safe
Swyped from my Samsung Galaxy SII
Thanks
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
satish0101 said:
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
Click to expand...
Click to collapse
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Jokesy said:
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
satish0101 said:
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
Click to expand...
Click to collapse
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks buddy.
I believe I have to send the phone to Samsung Service center then!!
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Hello guys,
After receiving positive feedback from members I have finally submitted my phone to service center.
Please pray and hope they don't find out about my little adventure!!
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash the rom again with Odin.
Sent from my Nexus 7 using xda premium
Correct s3 ???
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash again - but be 100% certain the ROM you are using is for the precise version of S3 that you have!
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
JJEgan said:
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
Click to expand...
Click to collapse
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
kofiaa said:
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Unfortunately after trying a method that we know nothing about that is often copied from XDA but missing vital facts .
jje
source of the problem found
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
Does not happen if you read and understand first .
jje
nope .. its still not working..
khairulpetrcech said:
nope .. its still not working..
Click to expand...
Click to collapse
Looks like a paid for repair .
But first just try flashing stock firmware via Odin .
jje
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
chris151722 said:
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
Click to expand...
Click to collapse
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
khairulpetrcech said:
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
Click to expand...
Click to collapse
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
your awesome !
chris151722 said:
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
Click to expand...
Click to collapse
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
khairulpetrcech said:
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
Click to expand...
Click to collapse
:good: glad i have help you out..
chris151722 said:
:good: glad i have help you out..
Click to expand...
Click to collapse
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
khairulpetrcech said:
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
Click to expand...
Click to collapse
Yes within the 2years warranty period..
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
khairulpetrcech said:
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yes try the kies method first before sending for repair.
but i dont think it will solve by kies update if you got the brick by flashing wrong cfautoroot.
maybe if you got the brick from flashing rom maybe it can be fix,
---------- Post added at 07:15 PM ---------- Previous post was at 07:08 PM ----------
t3chjunkie said:
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
Click to expand...
Click to collapse
you dont have warranty on your phone? if you have, you dont have to pay for service repair for it in claiming warranty.
i updated my galaxy S2 i9100 to official ics rom than rooted it via odin , than flashed a custom kernel and successfully entered to the clockwork mod then wiped data and my screen went black and my phone is dead :crying: .. . .
i tried to go to download mode and recovery but no response from the device the computer cant seems find the device while connected to the PC .. no response from the device when connected to the charger
is there i can do to turn this piece of plastic to a phone again except changing the mother board . .
shohag_prince said:
i updated my galaxy S2 i9100 to official ics rom than rooted it via odin , than flashed a custom kernel and successfully entered to the clockwork mod then wiped data and my screen went black and my phone is dead :crying: .. . .
i tried to go to download mode and recovery but no response from the device the computer cant seems find the device while connected to the PC .. no response from the device when connected to the charger
is there i can do to turn this piece of plastic to a phone again except changing the mother board . .
Click to expand...
Click to collapse
ICS 4.0.4?If so,then it's EMMC brick bug.
GamingDj said:
ICS 4.0.4?If so,then it's EMMC brick bug.
Click to expand...
Click to collapse
can it be fixed bro??? @GamingDj
I hope for your sake this is not the case.....but it sounds like another case of ics brickbug......
Can you tell us which kernel you flashed (provide a link if you can) and what (odin) method you used to root.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
keithross39 said:
I hope for your sake this is not the case.....but it sounds like another case of ics brickbug......
Can you tell us which kernel you flashed (provide a link if you can) and what (odin) method you used to root.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
i did this to my device almost 2 week ago and upgraded my HDD so unfortunately i don't have the back up and can't remember the kernel version or which file i used to root it
maybe luck is not on my side after all ... .
Ok....to recap......
Can you enter recovery mode?
Can you enter download mode?
Do you get the battery icon on the screen when you plug the charger in?
Does the area below the main camera get warm when you attempt to charge?
If your answers are 'no', 'no', 'no' and yes.....then more than likely it IS brickbug.......
Which brings me to my next question.......
Ignoring the fact that you rooted (this is now undetectable) are you under warranty?
Samsung are aware that *some* of their phones will fail if a wipe or kies update is performed on them. So as long as you tell them........
'I tried to update with kies and then the phone switched off and wouldn't switch on again'
then they *should* repair the phone under warranty.
Just DON'T mention XDA or rooting or odin or brickbug......or anything else like that and you should be ok.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Had the same problem with my old s2.The phone doesn't boot into recovery or download mode if the battery is dead,Make sure the battery is alright and try again.I had to replace my battery.
If all is well,then its EMMC brick.
Service centre.
keithross39 said:
Ok....to recap......
Can you enter recovery mode?
Can you enter download mode?
Do you get the battery icon on the screen when you plug the charger in?
Does the area below the main camera get warm when you attempt to charge?
If your answers are 'no', 'no', 'no' and yes.....then more than likely it IS brickbug.......
Which brings me to my next question.......
Ignoring the fact that you rooted (this is now undetectable) are you under warranty?
Samsung are aware that *some* of their phones will fail if a wipe or kies update is performed on them. So as long as you tell them........
'I tried to update with kies and then the phone switched off and wouldn't switch on again'
then they *should* repair the phone under warranty.
Just DON'T mention XDA or rooting or odin or brickbug......or anything else like that and you should be ok.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
the answer is "no","no","no' and "yes" and unfortunately i am out of warranty so should i assume the motherboard is permanently
dead ?? @keithross39 and tnx for answering
vish91 said:
Had the same problem with my old s2.The phone doesn't boot into recovery or download mode if the battery is dead,Make sure the battery is alright and try again.I had to replace my battery.
If all is well,then its EMMC brick.
Click to expand...
Click to collapse
after you replaced ur battery ware u able to go to download mode despite of the EMMC brick ether way i m going to change the battery and see if it works. . . thnx for replying ... @vish91
MistahBungle said:
Service centre.
Click to expand...
Click to collapse
unfortunately may be yes . . . :crying:
shohag_prince said:
the answer is "no","no","no' and "yes" and unfortunately i am out of warranty so should i assume the motherboard is permanently
dead ?? @keithross39 and tnx for answering
Click to expand...
Click to collapse
If it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Painful mistake. Hate reading threads like this.
keithross39 said:
if it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
sent from my rooted, de bloated, stock jb powered s2 via philz kernel and xda developers app
Click to expand...
Click to collapse
. .. . .
andrewwright said:
Painful mistake. Hate reading threads like this.
Click to expand...
Click to collapse
Painful indeed . . .. . .. .
was there anything i could have done to prevent this .. . ????
From what I can tell 4.0.4 was the problem. Soon as you factory reset the phone dies. Sam knows about this that makes it even worst. Sorry to hear about your dead s2
keithross39 said:
If it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
was there any thing i could have done to prevent this bro .. . . .????
Stay well away from 4.0.4 firmware and factory reset. Even with a custom kernel I think is a bad move to stay on it.
andrewwright said:
From what I can tell 4.0.4 was the problem. Soon as you factory reset the phone dies. Sam knows about this that makes it even worst. Sorry to hear about your dead s2
Click to expand...
Click to collapse
at least its good to know that its not my fault . . .. tnx bro. . .:good:
Some will say its your fault for not reading. Not me this is a dirty samsung problem and they should of recalled ALL the faulty handset's as I think they are faulty and pull the 4.0.4 from every were. Can I ask were did you get that firmware from?
hey guys, i just installed Siyah kernel on my S2. I'm on Resurrection Remix 4.0.6 Rom. installed it from recovery, rebooted the device then Siyah logo appears then goes all black can't access recovery nor download mode!!!
pls help I'm losing my mind
Mate.
RR is a 4.2.2 ROM which is based on AOSP or AOKP (not sure which)
The latest siyah for s2 only support samsung based ROMs which are at the moment 4.1.2
This one is on you for not reading sorry
This kernel is only for Samsung JB ROM
Click to expand...
Click to collapse
^^ Taken from the original site @gokhanmoral.com
I'm not very good when it comes to this, but if you're absolutely sure you can't access CWM Recovery or download mode - then i suspect hardbrick.
Which is quite odd, since i had flashed (about a year ago) a jelly bean ROM when i was on ICS - and all i got was bootloop.
meaning it's dead????!!!!!!!
DaSHiNGBooDi said:
meaning it's dead????!!!!!!!
Click to expand...
Click to collapse
I suspect so. But don't give up hope yet!
I'm not very tech savy (as mentioned) so don't take my word for it, wait for any other more-knowing users like MistahBungle, Hopper8, theunderling or gastonw. I'm sure one of them will appear soon enough..
WardenBerret said:
I suspect so. But don't give up hope yet!
I'm not very tech savy (as mentioned) so don't take my word for it, wait for any other more-knowing users like MistahBungle, Hopper8, theunderling or gastonw. I'm sure one of them will appear soon enough..
Click to expand...
Click to collapse
okay thanx buddy omg i only need the pics and vids i captured :'(
No life out of the phone there isn't much you can do. Service centre = replace motherboard, or do it yourself with a 2nd hand one. Either way, you won't be recovering the data if you didn't back it up.
DaSHiNGBooDi said:
rebooted the device then Siyah logo appears then goes all black can't access recovery nor download mode!!
Click to expand...
Click to collapse
To make things clear, you could only reboot it once? Does it turn on now?? Or is it completely lifeless?
Have you tried connecting a USB Jig mate?
WardenBerret said:
I suspect so. But don't give up hope yet!
I'm not very tech savy (as mentioned) so don't take my word for it, wait for any other more-knowing users like MistahBungle, Hopper8, theunderling or gastonw. I'm sure one of them will appear soon enough..
Click to expand...
Click to collapse
immortalneo said:
To make things clear, you could only reboot it once? Does it turn on now?? Or is it completely lifeless?
Have you tried connecting a USB Jig mate?
Click to expand...
Click to collapse
yeah it boots, the Samsung Galaxy S2 logo appears then the Siyah kernel logo appears then goes all black!
no i haven't tried jig coz i have no i idea what it is! would u pls point me to a thread explaining it??
DaSHiNGBooDi said:
yeah it boots, the Samsung Galaxy S2 logo appears then the Siyah kernel logo appears then goes all black!
no i haven't tried jig coz i have no i idea what it is! would u pls point me to a thread explaining it??
Click to expand...
Click to collapse
and it's able to charge!
DaSHiNGBooDi said:
yeah it boots, the Samsung Galaxy S2 logo appears then the Siyah kernel logo appears then goes all black!
no i haven't tried jig coz i have no i idea what it is! would u pls point me to a thread explaining it??
Click to expand...
Click to collapse
DaSHiNGBooDi said:
and it's able to charge!
Click to expand...
Click to collapse
So its probably not a total brick (yet)..
Check this out:
USB Jig
JTAG.
phew!!
i removed the battery and left it for a while then plugged it in, download mode worked!!! :laugh:
now i got everything back thank you guys for the help
So in other words, you were being hysterical over nothing ?
DaSHiNGBooDi said:
phew!!
i removed the battery and left it for a while then plugged it in, download mode worked!!! :laugh:
now i got everything back thank you guys for the help
Click to expand...
Click to collapse
Good for u! All that worry for nothing!
Please add [SOLVED] to the title of your post then.
"To err is human, to forgive is divine. "
Sent from my SGS II