[ROM][JB][MIUI4.1][GSM][SUSPENDED] Turbo MIUI v0.52.20914 (MIUI 2.9.14 on CM10) - Xperia Play Android Development

Development suspended until (if) CM10 gets to a faster and stable state. If you want a fast, fully working new MIUI experience, check out my other ROM.
​
Here is an alpha release of MIUI4.1 based on CM10 for the Xperia Play. It is built upon CM10-FXP137 and MIUI Jellybean for the Nexus S.
I am using this ROM as a daily driver now and it seems to be very stable. But since CM10 is still alpha, there may be some bugs still. Future updates may also require a factory reset, so be aware of that.
A CDMA version will come soon, as soon as CM10 is confirmed working on R800x I will work on it for MIUI.
Make sure you read the blue section "Special Notes/Partially working" below before using! It contains very important existing issues and work-arounds.
Working (tested):
Calls / Text / 3G / Data
Audio
Wifi
Camera
ALS / Auto-brightness
Web Browser (from MIUI 2.8.24)
Google Play Store (fully)
Google Now (no Voice Search)
Music/Gallery/Screenshot feature (Menu+VolDown)
Location/Maps/Compass
Gamepad
Touchpads (On most games, thanks to farenheith)
If you find a game that still doesn't have working touchpads, report it in farenheith's thread. Known games reported still not working:
- Dead Space
Not working:
Torch (unknown issue)
Wifi Tether (CM10 issue)
?
Partially working/special notes:
After call is ended, audio is not routed back to loudspeaker. Sounds will be very quiet! You need to either replug headphones or reboot the phone to fix it... sadly this is a CM10 issue and I can't fix it.
In Notification Panel, the Clear/Options button in top-right corner goes off the screen. Change font-size to "Small" (in Settings > Display) to fix this for now.
Google Play Store might not show installed apps or purchased apps after signing in for the first time. Simply 'Clear Data' for Google Play Store to fix it.
When screen is off, VolUp does nothing and holding either Vol button will only skip music tracks forward
?
Download/Instructions:
Turbo MIUI v0.52.20914
(1) Download the CM10 FXP-Turbo2 kernel. You can use any other CM10 kernel if you wish.
(2) Execute following commands on PC's shell/command prompt to install kernel and prepare:
Code:
fastboot flash boot boot.img
fastboot erase system
fastboot erase userdata
(3) Copy the update ZIP to SDCard. To enter Recovery on this kernel, press Back when you feel the vibration trigger on first logo.
(4) Install the ZIP update as normal.
Screenshots:
Changelog:
Code:
v0.52.20914
-----------
- Revert: CM10-FXP137
- New: FULL TOUCHPAD SUPPORT. Thanks to farenheith!
- Fix: Camera
- Fix: SIM PIN prompt on startup (thanks to Lens_Flare). Phone is not multilingual for the moment due to APKTool bug.
- Fix: Disable Setup Wizard using old Provision, temporary until bugs sorted out in patching
- Fix: Browser user-agent
- Fix: Official Facebook app, maybe other web apps
- Fix: Magnify-glass zoom widget when selecting text (love this feature, glad I fixed it)
- Tweak: Disable services from writing adj and minfree values, allowing init.d tweaks to actually work.
v0.51.20914
-----------
- Update: CM10-FXP138
- Update: MIUI v2.9.14
- Update: Using latest MIUI browser from now on (with latest FXP webkit backend). Please report any browser crashes, video sites need testing.
- New: Multilanguage support
- New: Google Now voice search (untested)
- New: Google Now offline support (untested)
- New: Face Unlock (untested)
- Aroma: Fix "Default" install mode
- Aroma: Elite install - disable CPU rendering (set back to CPU+GPU for default). This can be switched after install by using the "Customize" option
- Aroma: Elite install - disable Setup Wizard to bypass need for Xiaomi account by using old Provision APK. May have unknown side-effects.
v0.41.20907
-----------
- Update: CM10-FXP137
- Update: MIUI v2.9.7
- Tweak: DalvikOpt flags
- Tweak: Remove entire software-rendering pathway, forcing GPU always (thanks to ShyamSasi)
- Fix: Camera
- Aroma: Added AD2SDX alpha 2 by amarullz as an sd-ext alternative, with my own CM10 fix
v0.3.20831
----------
- Update: CM10-FXP136
- Update: MIUI v2.8.31
- Fixed: No need to disable HW overlay for video anymore (Thanks to FXP)
- Removed: Bundled Live Wallpapers (except picker app)
- MIUI base switched to crespo (Nexus S)
- Using MIUI Browser v2.8.24 from now on (no new night mode, no future updates on browser)
v0.3.20817
----------
- Fixed: Play Store FC, possibly other problems due to APKTool bugs (using precompiled Framework resources, "disable signature checking" reverted)
- Update: ES File Explorer, Link2SD, Play Store and Titanium Backup
v0.2.20817
----------
- Update: CM10-FXP135
- Update: MIUI v2.8.24
- Fixed: Link2SD (permissions 777 on symlinks to fix from being stale which causes a link-break on every reboot)
- Hack: Disabled system package signature verification (required for future fixes)
- Tweak: Optimized Lowmemorykiller and VM sysctl values for better memory management and performance (for <512MB devices like ours)
- Tweak: Most system packages recompressed and zipaligned. Slightly longer boot time but saves a few precious MB on /system.
- Tweak: Disable automatic brightness
- Tweak: Moved system apps to data (default enabled in Aroma installer): Google Talk; MIUI Compass, Gallery and Music
- New: AppWidgetPicker
- New: DSP Manager (from CM10)
- New: Volume+ (skip music) mod. Sort of. While screen is off and music playing, VolUp does nothing and both keys skip forward.
- New: zRAM enabled at 10% (this is good with new snappy compression in kernel)
- New: Purgable assets enabled
- New: Kernel samepage-merging enabled
- New: Strict-mode checking disabled
- Note to self: We use libwebcore from FXP134 and WebKit core framework from MIUI v2.8.17 from now on
v0.1.20817
----------
- Initial version
- Based on official CM10-FXP134 for Zeus and MIUI UK's 2.8.17 for the Galaxy Nexus

---

Does this have CDMA support yet? And I assume you'd like a logcat.

---

game_guy said:
Does this have CDMA support yet? And I assume you'd like a logcat.
Click to expand...
Click to collapse
No, and no. Read the OP. It takes me a long time to upload.
I will release a CDMA test version soon. This will take a while because I have to upload two separate versions and I don't know if CM10 for zeusc even works yet.
Click to expand...
Click to collapse

---

Ah. My bad, didn't notice that sorry. >.<

---

It does on pax's 7/29 build. You could use that as a base for the cdma variant as that has *almost everything working.

---

game_guy said:
Ah. My bad, didn't notice that sorry. >.<
Click to expand...
Click to collapse
It's fine, just be patient.
cj360 said:
It does on pax's 7/29 build. You could use that as a base for the cdma variant as that has *almost everything working.
Click to expand...
Click to collapse
Link please? Is it CM10?
Upload finished.

---

****yeah
i'm go testing now
and will be translate russian later
this is port of that

---

wmaster4g said:
****yeah
i'm go testing now
and will be translate russian later
this is port of that
Click to expand...
Click to collapse
No, this is my own work. If I got it from that guy I would have given credit to him.
EDIT: He probably used my own research. Unlike most XDA "developers", I like to share what I know with the community. Or maybe he is actually one of the few skilled hackers on here and also did it himself like me.

---

gonna try it later after work and will report the bugs
thanks for bringing up another JB Rom pal

---

CosmicDan said:
It's fine, just be patient.
Link please? Is it CM10?
Upload finished.
Click to expand...
Click to collapse
Here it is and yes it's cm10.

---

Good work!! Goinf to have it downloaded in a few hours.. Gotta sleep first.. One question.. Does the sd card mount properly?
Sent from my Xperia Play using xda premium

---

cj360 said:
Here it is and yes it's cm10.
Click to expand...
Click to collapse
Alright thanks, I'll try and build a CDMA test version. But since this isn't FXP I won't be able to keep it as up-to-date.
Fat_boy555 said:
Good work!! Goinf to have it downloaded in a few hours.. Gotta sleep first.. One question.. Does the sd card mount properly?
Click to expand...
Click to collapse
Sure, why wouldn't it? Unless you mean the CM10 bug where it says "Unable to install to internal USB or memory card" when you try to install paid apps from the Play Store, no. That is a CM10 bug. But restoring everything from TB works fine, and installing free apps/updates from Play Store works fine.

---

CosmicDan said:
Alright thanks, I'll try and build a CDMA test version. But since this isn't FXP I won't be able to keep it as up-to-date.
Click to expand...
Click to collapse
Awesome, I know pax will update once he's able to and eventually fxp will figure out data as well.
Going kinda off-topic with this so let me know if you'd rather not discuss it here but, do you build your kernel with ics sources modified for JB or from fxp's jb sources?

---

cj360 said:
Awesome, I know pax will update once he's able to and eventually fxp will figure out data as well.
Going kinda off-topic with this so let me know if you'd rather not discuss it here but, do you build your kernel with ics sources modified for JB or from fxp's jb sources?
Click to expand...
Click to collapse
The kernel I'm building from is branched off JBX repo (on the 'jellybean-turbo' branch), however I did a full tree comparison and the FXP CM10 jellybean kernel is identical to the JBX one - apart from the zRAM update from FXP (Google snappy compression) which I have already merged in CM9 turbo kernel. The RAMDisk is based on FXP RAMDisk.

---

Computer's built, installing Ubuntu 12.04 soon so i'll be back in the game.
Cosmicdan, what does SEMCRIL look like in Framework?
Pax

---

paxChristos said:
Computer's built, installing Ubuntu 12.04 soon so i'll be back in the game.
Cosmicdan, what does SEMCRIL look like in Framework?
Pax
Click to expand...
Click to collapse
The full SemcRIL code for this ROM is taken directly from CM10, along with BaseCommands and PhoneFactory. It was actually a requirement to get it booting. Using my existing scripts but replacing the CM10 base for CDMA version, and the MIUI base for the CDMA Galaxy Nexus version, it should hopefully be enough....
...I would upload my "kitchen" so people can try to build it and bugtest, but how many of you guys with CDMA zeus's are good with smali? Also it requires Windows Vista/7.

---

paxChristos said:
Computer's built, installing Ubuntu 12.04 soon so i'll be back in the game.
Cosmicdan, what does SEMCRIL look like in Framework?
Pax
Click to expand...
Click to collapse
Good to hear! Are there any working CDMA builds floating around, or should we wait for builds from you?

---

Leraeniesh said:
Good to hear! Are there any working CDMA builds floating around, or should we wait for builds from you?
Click to expand...
Click to collapse
Of what? MIUI or CM10? Check the JBX thread for CM10 working CDMA. Wait, cj posted the link a few posts back to a CM10 for zeusc with working data.

---

Sorry to hijack cosmic,
My guess as to why CM10 data stopped working for CDMA is because of a commit done a while back (August 5th)
Now that I have a working PC i'm gonna try to undo that & see if that's the issue & if it is, I need to coordinate with FXP to create a ril for cdma & edit some common files
Pax

---

paxChristos said:
Sorry to hijack cosmic,
My guess as to why CM10 data stopped working for CDMA is because of a commit done a while back (August 5th)
Now that I have a working PC i'm gonna try to undo that & see if that's the issue & if it is, I need to coordinate with FXP to create a ril for cdma & edit some common files
Pax
Click to expand...
Click to collapse
That's fine, it's is still relevant since it's based on CM10. So is that build linked a while back working with CDMA fully or not? I will probably not update the GSM ROM of this until next FXP release anyway so.... yeah.
It would be good if FXP CM10 had CDMA working, because then I could easily create a patch for this GSM ROM. I really don't want to have to upload two full ROM's every time.