Hello! This is my second android phone, this nice HTC Legend. It doesn't seem so straightforewards as the Sony Ericsson Xperia x10 mini pro though. I was probably a bit spoiled by the availability of a tool to flash the firmware/kernels with, though.
I have been trying to find and download HTC Super Tool (v3), but can find no working downloads, either across goo.im, mediafire or rapidshare- each reports that the file was removed for some reason.
My Legend had firmware/kernel v 3.30 with a froyo 2.2 stock rom on it when I recieved it, unrooted, so I followed this guide 'http://wiki.cyanogenmod.com/wiki/HTC_Legend:_Full_Update_Guide'
Which instructs one to take the kernel and downgrade it to version 1.31, so that clockworkrecovery v2.5 to 3.5 can be used with the phone.
After trying HOMIcs, I kind of miss the stock rom. I tried using B today, and after flashing the rom and update, the Legend is stuck in 'trying to boot' mode, which in my experience from the SE xperia x10 means that the kernel/firmware is incompatible with the ROM I am trying to use.
I have indeed tried to use the HTC WWE 3.30 RUU to upgrade the Legend mobile again after the downgrade process from that guide. It had HOMIcs running at that point, and the process failed, saying 'update your phone software again, you dolt, we can't update your firmware/kernel without the software being proper!' (Argh.)
Am I stuck with the RUU 1.31 now?
Does anyone have a copy of HTC supertool around? Can they please put it on a share site so I can access it? If not, what was the reason the tool's been killed off?
I'm going to mess around with a clean Cyanogen 7.2 rom for now, I suppose.
Thanks very much for replies (I'll thank-button you)
---19:37--
Have burned alpharev 1.8 to a cd and rebooted, started the process of switching to s-off to hopefully have an easier time updating the kernel/firmware, got to where it says 'power off in 90 seconds', and then my PC powers off, not my phone. "%ยค#!
Still trying.
...Oh! Alpharev works only on HBOOT 1.0 or lower, and mine is 1.02.
Hoo-kie.
--23:12 aug 23--
Found out thathttp://forum.xda-developers.com/showthread.php?t=987251 is exactly what I wanted, though it needed a lot of tweaking. Looks like S-off and updating the HBOOT wasn't at all necessary~
Well, hopefully this thread will help other users looking for the same thing!
While I can't help you with your "real" problem, I do have a copy of HTCSupertoolV3 laying around.
I just uploaded it to MediaFire. Unfortunately, this forum prevents me from posting "outside links" before I have 10 posts. I will try and see if I can PM you the link instead.
Edit: It worked! Check your PM's buddy!
SALLEBALL said:
While I can't help you with your "real" problem, I do have a copy of HTCSupertoolV3 laying around.
I just uploaded it to MediaFire. Unfortunately, this forum prevents me from posting "outside links" before I have 10 posts. I will try and see if I can PM you the link instead.
Edit: It worked! Check your PM's buddy!
Click to expand...
Click to collapse
Could you possibly send me a link to the HTCSuperTool? I've been looking for it everywhere but can't seem to find it. Thank you
HTCSupertoolv3.rar
Hopefully that link won't time out too fast! (Aug 25 2012)
Thank you, Salleball!
Rooted!:victory:
illysmanx said:
Hopefully that link won't time out too fast! (Aug 25 2012)
Thank you, Salleball!
Rooted!:victory:
Click to expand...
Click to collapse
It won't ever go down I hope, I will check on it regurarly. If it ever goes down I will re-up it as soon as I can.
And, no problem!
SALLEBALL said:
It won't ever go down I hope, I will check on it regurarly. If it ever goes down I will re-up it as soon as I can.
And, no problem!
Click to expand...
Click to collapse
Hey Salleball,
Just thought I'd let you know that I posted your link in the HTC Super Tool v3 thread for others. I've given you credit and linked to this thread and your member profile
Edit: You can see it here if you want to.
smithchipz said:
Hey Salleball,
Just thought I'd let you know that I posted your link in the HTC Super Tool v3 thread for others. I've given you credit and linked to this thread and your member profile
Edit: You can see it here if you want to.
Click to expand...
Click to collapse
I appreciate it, Always good if people get to see me as a helpful member.
Related
So im cool with CWM. Simple. easy.
How the heck do i flash back to stock recovery so i can go 1.2 with it?
Since its 'baked in' i cant remove the hijack and restore the logwrapper...
am I being obtuse?
My understanding of the process is this -
If you are running a rom that has the recovery package built in, your tab is rooted and you have superuser status:
All you need is a Terminal Emulator such as Android Terminal Emulator (in market)
Run Terminal Emulator and type:
su
Then type:
fixrecovery.sh - This installs/flashes Stock recovery
If I'm wrong then at least this will prompt those that know more to chime in
you've made almost 150 posts and do not know the answer to this question?
You could read Goodintentions G-Tbalet for Dummies site
you can use Calkulins "Format all" zip to wipe everything and start fresh from there (perferred method)
You could Flash stock 3588
There was a post recently called "Foolproof method of getting to 1.2 from 1.1" by Ramerco that I followed and it worked perfectly.
I just can't believe that you've posted that many times and never stumbled across the answer ot your question...
TJEvans said:
you've made almost 150 posts and do not know the answer to this question?
You could read Goodintentions G-Tbalet for Dummies site
you can use Calkulins "Format all" zip to wipe everything and start fresh from there (perferred method)
You could Flash stock 3588
There was a post recently called "Foolproof method of getting to 1.2 from 1.1" by Ramerco that I followed and it worked perfectly.
I just can't believe that you've posted that many times and never stumbled across the answer ot your question...
Click to expand...
Click to collapse
I was a little surprised too. But everything ive done, was with CWM. All my efforts have been towards putting CWM On the os lol. I know how to remove it when its installed (logwrapper) but i wasnt sure how to flash the stock rom... never wanted stock =D Ill check out the foolproof thread.
While im here - What are the added benefits of going for 1,2? I got a variation of HC working on 1.1 right now. (again through CWM
kodakeos said:
While im here - What are the added benefits of going for 1,2? I got a variation of HC working on 1.1 right now. (again through CWM
Click to expand...
Click to collapse
not much, really. It's just assumed that since VS released, then pulled the update that migrated their OS to 1.2, and that pretty much all other malata tablets use the 1.2 branch, that it's easy to assume that eventually, if ever, there will be an update from VS that would be on the 1.2 bootloader.
a month ago, there were different roms for different branches. They've merged now, and you can pretty much get whatever rom you want on either bootloader (or a variation at least)
kodakeos said:
I was a little surprised too. But everything ive done, was with CWM. All my efforts have been towards putting CWM On the os lol. I know how to remove it when its installed (logwrapper) but i wasnt sure how to flash the stock rom... never wanted stock =D Ill check out the foolproof thread.
While im here - What are the added benefits of going for 1,2? I got a variation of HC working on 1.1 right now. (again through CWM
Click to expand...
Click to collapse
My site. Look in signature.
goodintentions said:
My site. Look in signature.
Click to expand...
Click to collapse
Why link to your site with all of its ads? Why don't you give a response here? What's your alterior motive?
buchaneer.nl said:
Why link to your site with all of its ads? Why don't you give a response here? What's your alterior motive?
Click to expand...
Click to collapse
Hey goodintentions has pretty good site, there are few things that are missing (like calling out to actually let the tab bootup fully when back on stock before trying to load a ROM ***hint hint***) or calling section A / B / C and then refering to it as parts 1 / 2 / 3 ..lol (busting chops) but its a good site to bookmark a ref when modding your tab.
goodintentions thanks...ps let me know if you want some proof-reading service on your site....lol
buchaneer.nl said:
Why link to your site with all of its ads? Why don't you give a response here? What's your alterior motive?
Click to expand...
Click to collapse
Ads? Can you be more specific? What ads? There should be no ads at all.
Never been there...
buchaneer.nl said:
Why link to your site with all of its ads? Why don't you give a response here? What's your alterior motive?
Click to expand...
Click to collapse
Its obvious you've never been to GOODINTENTIONS site. Its GREAT!!!
You should check it out BEFORE you comment.
And you should check your spelling of alterior. It ULTERIOR.
Have a nice day.
buchaneer.nl said:
Why link to your site with all of its ads? Why don't you give a response here? What's your alterior motive?
Click to expand...
Click to collapse
I don't see any ads(?). I even have adblock off for his site, in case he did use ads (if ads kept the site alive, then it's worth it imo).
As for motive, as far as I know it's to help out the community and nothing more - I even gave goodintentions a donation to keep his site going, because if it reduces the redundant questions here, then it's well worth having.
As a former modder here, you cannot believe the amount of redundant PM's I would get over and over and over and over again about the GTablet. I had asked for someone to build out a good wiki here on XDA back in March, but it never really went anywhere - so his site is a BIG help to me, and I suspect other power users as well.
Look at the stickies on this forum - for a new user trying to find information, it's far from optimal. Goodintentions site provides a service that's lacking here - simple as that.
It seriously does reduce the amount of redundancy in the threads. It also cuts down on redundant pm's. If his ulterior motive was to make money he sure as hell wouldn't have put so much time and effort into a site dedicated to a legacy device.
Thanks again GI.
So I downloaded the PH86IMG.zip file from the thread on how you install the current version of clockwork mod back at the developers thread of the amaze 4G forum and when ever i go into Bootloader mode it would "update" but at the end it will say
Main Version is older
Update Fail!
did i do anything wrong? i followed the instructions and everything is there a newer PH86IMG.zip file that will work. BTW i got that OTA update from Tmobile. im not sure how many OTA updates there were im assuming there was only 1.
Any Help would be appreciated
I don't know exactly the details and versions for our phone, but on the MT4G we had issues if your radio was newer than the ROM or PH15IMG.zip file you were trying to use in bootloader.
For example, if you had a GB radio and tried to flash a Froyo rom through bootloader it wouldn't work. You get the same error that you're getting. I think it was determined you can only do this if your true s-off.
I would check your radio and the stock rom versions available, make sure the rom you want is newer than your radio. So you might have to change your radio to a previous version. This is all based on my experience with the MT4G, so it could be wrong here but it sounds similar. Good luck!
Sent from my HTC Amaze 4G using XDA App
man i got the same problem when i got my amaze and i tried everything. if you want help. go here and there is a link where a guy send me the newest file and it worked great the original thread for this needs to be updated with the new file
here is the link http://forum.xda-developers.com/showthread.php?t=1392774
gypsy214 said:
man i got the same problem when i got my amaze and i tried everything. if you want help. go here and there is a link where a guy send me the newest file and it worked great the original thread for this needs to be updated with the new file
here is the link http://forum.xda-developers.com/showthread.php?t=1392774
Click to expand...
Click to collapse
hey thanks alot for hte link im going to try it right now. i read the thread and i agree with you the OP of that thread needs to update that PH86IMG.zip file he has on his instructions its causing alot of confusion for me
great im happy to help. let us know how it go
gypsy214 said:
great im happy to help. let us know how it go
Click to expand...
Click to collapse
it worked i just flashed quicksense. so much better without the bloatware
but the issue is now my onscreen keyboard wont show up when i need to type in something
gypsy214 said:
man i got the same problem when i got my amaze and i tried everything. if you want help. go here and there is a link where a guy send me the newest file and it worked great the original thread for this needs to be updated with the new file
here is the link http://forum.xda-developers.com/showthread.php?t=1392774
Click to expand...
Click to collapse
The guy has a name. LOL!
Here it is again.
http://forum.xda-developers.com/showpost.php?p=20230294&postcount=25
All I did was change the version number in the android-info.txt file.
Binary100100 said:
The guy has a name. LOL!
Here it is again.
http://forum.xda-developers.com/showpost.php?p=20230294&postcount=25
All I did was change the version number in the android-info.txt file.
Click to expand...
Click to collapse
i guess it looks like i was taking all the credit right? lol im sorry man didnt even notice it, i was just glad to help people out with the same problem i had. next time will think before i act lol
gypsy214 said:
i guess it looks like i was taking all the credit right? lol im sorry man didnt even notice it, i was just glad to help people out with the same problem i had. next time will think before i act lol
Click to expand...
Click to collapse
I'm not worried about credit. If you made it easier for someone to get the job done then good for you. They would have stumbled onto the post eventually. I was just making it even easier so they wouldn't have to dig through a dozen or so pages of information.
Hello guys,
I don't know whether you already have this, but I'm sharing in case I can help someone with this.
The following is the official ICS update as my phone downloaded it, the original, untouched file. I'm in Europe.
OTA_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1-1.20.401.8_release_2627623qpt0ma8rnwgn0qq.zip
Download at:
(I can't post outside links, because I'm a new user. anyone can help with this?)
Code:
MD5: 577b5d06412d99cf94985817e9a8dd9a
its already out and about i think
rimmer123 said:
Hello guys,
I don't know whether you already have this, but I'm sharing in case I can help someone with this.
The following is the official ICS update as my phone downloaded it, the original, untouched file. I'm in Europe.
OTA_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1-1.20.401.8_release_2627623qpt0ma8rnwgn0qq.zip
Download at:
(I can't post outside links, because I'm a new user. anyone can help with this?)
Code:
MD5: 577b5d06412d99cf94985817e9a8dd9a
Click to expand...
Click to collapse
Pm me the link and il repost is, quoting you to "thank" , thanks
Here is the link for OTA_SHOOTER_U_ICS_35_S_HTC_Eur zip (298.42MB) as I picked up by googling. I do not own any responsibility for the correctness. The link for download is available at this URL:
http://kuai.xunlei.com/d/MAXRBMXQTFLH?p=130500
rimmer123 said:
Hello guys,
I don't know whether you already have this, but I'm sharing in case I can help someone with this.
The following is the official ICS update as my phone downloaded it, the original, untouched file. I'm in Europe.
OTA_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1-1.20.401.8_release_2627623qpt0ma8rnwgn0qq.zip
Download at:
(I can't post outside links, because I'm a new user. anyone can help with this?)
Code:
MD5: 577b5d06412d99cf94985817e9a8dd9a
Click to expand...
Click to collapse
Thank Rimmer for this link ! Just reposting for him. Here you are..
http://store.rimmer.sk/OTA_SHOOTER_...1.20.401.8_release_2627623qpt0ma8rnwgn0qq.zip
Sent from my PG86100 using xda premium
How to install the update manually
I have downloaded this file. Pls tell me how to install it on my EVO 3D GSM
mirmir9 said:
I have downloaded this file. Pls tell me how to install it on my EVO 3D GSM
Click to expand...
Click to collapse
+1
Meh never mind, went to a cafe with free WiFi and job's a good 'un!
Im unable to install the this update from recovery. Please let me know how to install this.
I tried install update from SD but the phone reboots.
My Phone is unlocked
That's prolly just the ota... Not ready to flash via recovery. Must be taken apart and assembled with slight modifications first. Unless its an update .zip either case I would wait for the go ahead.
Sent from my PG86100 using xda premium
Why is thread still open?
eXplicit815 said:
Why is thread still open?
Click to expand...
Click to collapse
Why should it be closed?
Do us all a favor and explain your statement, please.
mod edit
mirmir9 said:
Im unable to install the this update from recovery. Please let me know how to install this.
I tried install update from SD but the phone reboots.
My Phone is unlocked
Click to expand...
Click to collapse
Rename to PG86IMG.zip and boot into bootloader and press vol up but I suggest u remove the hboot and recovery signed imgs from the zip first
Sent from my PG86100 using xda premium
Sorry for the Wrong Info. Actually my phone is locked with S -on. I'm very eager to update to ICS 4.0. I even tried renaming this file to update.zip and just "update". When I select "install update from SDcard" the phone just reboots.
Thanks,
oldjackbob said:
Why should it be closed?
Do us all a favor and explain your statement, please.
Click to expand...
Click to collapse
Explained:
http://forum.xda-developers.com/showthread.php?t=1732984
Also, the OP's only post on this site is the first one in this thread.
Oh, and there's no actual download link for anything in the post, either.
You tell me why it shouldn't be closed.
Hello everyone.Can someone please explain me how to install it to my evo gsm??
I have unlocked it with S -on.Thank you.
Finally got the ICS update today here in Dubai. lot of excitement during installation.
Guys if you haven't received the update yet please be patient you will receive it.
ICS looks good especially the Home Screen. No wallpaper Scrollable function present but overall it looks good and nothing great about it. Have to wait and see the performance.
The interface is okay nothing much new.
HTC will soon announce the Phones which can be upgraded to Jelly bean 4.1. it seems they wont delay like they did for ICS. I'm sure EVO 3D will be compatible with Jellybean 4.1. :laugh:
mirmir9 said:
Finally got the ICS update today here in Dubai. lot of excitement during installation.
Guys if you haven't received the update yet please be patient you will receive it.
ICS looks good especially the Home Screen. No wallpaper Scrollable function present but overall it looks good and nothing great about it. Have to wait and see the performance.
The interface is okay nothing much new.
HTC will soon announce the Phones which can be upgraded to Jelly bean 4.1. it seems they wont delay like they did for ICS. I'm sure EVO 3D will be compatible with Jellybean 4.1. :laugh:
Click to expand...
Click to collapse
HTC has declined to comment on updating phones to Jelly Bean:
http://www.theverge.com/2012/7/2/3126604/android-jelly-bean-updates-htc-samsung-google-pdk
mirmir9 said:
Finally got the ICS update today here in Dubai. lot of excitement during installation.
Guys if you haven't received the update yet please be patient you will receive it.
ICS looks good especially the Home Screen. No wallpaper Scrollable function present but overall it looks good and nothing great about it. Have to wait and see the performance.
The interface is okay nothing much new.
HTC will soon announce the Phones which can be upgraded to Jelly bean 4.1. it seems they wont delay like they did for ICS. I'm sure EVO 3D will be compatible with Jellybean 4.1. :laugh:
Click to expand...
Click to collapse
I am also in dubai still didnt recieve my ics update...could you please tell me what Hboot are you running for me my phone is locked and S-ON and my hboot version is 1.49.0018 and which carrier are you using in dubai etisalat or du if possible can you please tell me how can i update my Hboot...Thanks.
solidsnake_devil said:
I am also in dubai still didnt recieve my ics update...could you please tell me what Hboot are you running for me my phone is locked and S-ON and my hboot version is 1.49.0018 and which carrier are you using in dubai etisalat or du if possible can you please tell me how can i update my Hboot...Thanks.
Click to expand...
Click to collapse
It is Elitasat. My Hboot is 1.49.0011. I don't think it has got anything to do with Hboot and if your phone is locked with S-ON surely you will be able to install it. I'm sure you will receive the update if you had purchased it in UAE.
can someone explain how to upgrade from twrp 2.1.8 to 2.2.1? is it necessary? i see where some new roms call for being on 2.2.1 as a preference. and if someone can explain, how do i keep my nandroid backups? i have searched i just havent found a clear cut answer. and im very worried about losing my original backup. i am s-on rooted and did take the ota. ive been using meanrom v2.0. i was thinking bout trying viper 4g and it states in the installation instructions twrp 2.2.1 would be best. i would like t be on the latest recovery regardless. thanks to those who may help.
Im pretty sure your backups will still work on the latest twrp recovery.
To upgrade your recovery download goomanager from the play store. Open the app and hit menu. Choose install openrecoveryscript and it pretty much does it for you. It's really easy.
Sent from my HTC Evo LTE
treIII said:
can someone explain how to upgrade from twrp 2.1.8 to 2.2.1? is it necessary? i see where some new roms call for being on 2.2.1 as a preference. and if someone can explain, how do i keep my nandroid backups? i have searched i just havent found a clear cut answer. and im very worried about losing my original backup. i am s-on rooted and did take the ota. ive been using meanrom v2.0. i was thinking bout trying viper 4g and it states in the installation instructions twrp 2.2.1 would be best. i would like t be on the latest recovery regardless. thanks to those who may help.
Click to expand...
Click to collapse
i would ask in the thread for twrp. i can tell you that on the evo 3D from 1.11 to 2.0 the nandroids would not work .had to be from current version of twrp. i would assume its still the same.but ask there.
kaos420 said:
i would ask in the thread for twrp. i can tell you that on the evo 3D from 1.11 to 2.0 the nandroids would not work .had to be from current version of twrp. i would assume its still the same.but ask there.
Click to expand...
Click to collapse
i tried to post in the twrp thread but as i am a junior member it stated i must have 10 posts before i can post in there. how can i be able to communicate with some one to b able to post in there.
treIII said:
i tried to post in the twrp thread but as i am a junior member it stated i must have 10 posts before i can post in there. how can i be able to communicate with some one to b able to post in there.
Click to expand...
Click to collapse
The theory, as I understand it, is that you're supposed post in other threads outside of dev and join and participate in the community before you start running into problems that you need help with. Anyway, have you read that thread through? I think backwards compatibility was addressed a while ago, I don't remember it being an issue, but I could be wrong. As far as installing the latest version, that was answered above.
fachadick said:
The theory, as I understand it, is that you're supposed post in other threads outside of dev and join and participate in the community before you start running into problems that you need help with. Anyway, have you read that thread through? I think backwards compatibility was addressed a while ago, I don't remember it being an issue, but I could be wrong. As far as installing the latest version, that was answered above.
Click to expand...
Click to collapse
there are 2 posts above. which seems to be correct? they contradict each other. i have posted on here more than 10 times. i dont know why my permissions havent been changed. and i always read before asking questions. maybe i missed that part though. thx
It's not a major version upgrade so just upgrade it and enjoy the awesome.
Sent from my EVO using Tapatalk 2
treIII said:
there are 2 posts above. which seems to be correct? they contradict each other. i have posted on here more than 10 times. i dont know why my permissions havent been changed. and i always read before asking questions. maybe i missed that part though. thx
Click to expand...
Click to collapse
Weird about your postcount, you may want to pm a mod about that. The posts above do contradict each other. What it comes down to though is that if you want to flash viper4g, you need to upgrade your recovery. Why not upgrade recovery, then run a fresh backup before you flash the new rom?
GO to the TWRP homepage... clink the link to enter their IRC chat... They will answer your question there. My wife and I had problems with TWRP and back ups and they were most helpful.
treIII said:
i tried to post in the twrp thread but as i am a junior member it stated i must have 10 posts before i can post in there. how can i be able to communicate with some one to b able to post in there.
Click to expand...
Click to collapse
I'm looking for the original GB release for the Evo View. All the links seem to be dead. Any help would be greatly appreciated.
RUU_Express_Sprint_WWE_1.18.651.1_Radio_1.05.11.0509_NV_2.28_SPCS_release_192501_signed.exe
sfhub said:
I'm looking for the original GB release for the Evo View. All the links seem to be dead. Any help would be greatly appreciated.
RUU_Express_Sprint_WWE_1.18.651.1_Radio_1.05.11.0509_NV_2.28_SPCS_release_192501_signed.exe
Click to expand...
Click to collapse
Did you check here? I'm haven't checked if the original GB release is in there, though.
http://www.androidfiles.org/ruu/?developer=Flyer_View
RoboticBuddy said:
Did you check here? I'm haven't checked if the original GB release is in there, though.
http://www.androidfiles.org/ruu/?developer=Flyer_View
Click to expand...
Click to collapse
Yes I did and already downloaded the RUU there.
Unfortunately they only have the 1.22.651.1 (2nd release) which I'm already running.
The original GB release was 1.18.651.1.
Thanks for the suggestion though.
I know somebody out there has the RUU sitting on their drive, but this forum gets so viewers now it is hard to reach the right person.
I've searched, but can't seem to find anything. Sorry for not being much help over here.
But just out of curiosity, why do you need the original RUU?
RoboticBuddy said:
I've searched, but can't seem to find anything. Sorry for not being much help over here.
But just out of curiosity, why do you need the original RUU?
Click to expand...
Click to collapse
Some stuff I'm working on runs well with the original software and I upgraded w/o realizing it. I've always had access to the original RUUs before on other HTC devices so was a little surprised they are so hard to locate for the Evo View.
sfhub said:
Some stuff I'm working on runs well with the original software and I upgraded w/o realizing it. I've always had access to the original RUUs before on other HTC devices so was a little surprised they are so hard to locate for the Evo View.
Click to expand...
Click to collapse
I think I have obtained the RUU that you're looking for, but it was on some Chinese website, and you had to register in order to download. I lost the link, but I successfully downloaded the RUU. Where do you think I can upload to; DropBox keeps failing?
EDIT: Currently uploading files to MediaFire. Just check out the link from time to time, the uploading will take a while. http://www.mediafire.com/folder/x2m3x97ynnb92/RUU_Express_Sprint_WWE_1.18.651.1
RoboticBuddy said:
I think I have obtained the RUU that you're looking for, but it was on some Chinese website, and you had to register in order to download. I lost the link, but I successfully downloaded the RUU. Where do you think I can upload to; DropBox keeps failing?
EDIT: Currently uploading files to MediaFire. Just check out the link from time to time, the uploading will take a while. http://www.mediafire.com/folder/x2m3x97ynnb92/RUU_Express_Sprint_WWE_1.18.651.1
Click to expand...
Click to collapse
Thank you very much.
Could you post or send me a md5 checksum so I can verify the upload/download was successful?
Thanks.
sfhub said:
Thank you very much.
Could you post or send me a md5 checksum so I can verify the upload/download was successful?
Thanks.
Click to expand...
Click to collapse
You're welcome. I'm glad I could help.
MD5 Checksums:
part01: b024562ca2139fb5469ce34d069cb062
part02: a7765cdaa832fdf16037c7287d9aa291
part03: ac8f7e6a1f2bc4ee92d3526c3f27e8a8
part04: 4e4be56ff4a3d174f8c74f26511bb9af
part05: 225d2addbc2288e302a5395d841f50aa
part06: 321734f93c1fdd107a4b0b39544dbc72
part07: c90dcc2f1f28c8045062f1edb9b13d99
part08: 9c7b680ca98a7f445a4a736f7c78802b
part09: 747091d405663080264e3a5bdccde9ba
part10: e5e0d5e9c0c4ec47958c6db017015300
part11:49b1ae185006ff9f445a33c750bf24f5
Sorry that I had to upload the files in parts, MediaFire wouldn't let me upload anything larger than 500MB.
sfhub said:
Some stuff I'm working on runs well with the original software and I upgraded w/o realizing it. I've always had access to the original RUUs before on other HTC devices so was a little surprised they are so hard to locate for the Evo View.
Click to expand...
Click to collapse
I'm just curious what stuff runs better?
Sent from my SPH-D700 using Tapatalk 2
hey guys. the same question. if someone have this rom on hard drive? googled a lot but didn't found it yet...