Hello,
Last night I updated my S3 i9300 (International) while it was already rooted on stock.
After the successful update the phone was working fine for a moment, but after a while it rebooted randomly while being idle. now in the morning the phone was working the same for a while, after the occasional reboot, the phone didn't turn on, however it showed the ( Samsung Galaxy S III i9300 ) screen, loaded the logo for a while and then restarted again.
When i open the clockwork recovery, it works fine but reboots after a while.
I had a backup made from the clockwork recovery before the update and is stored on my PC (not phone).
Is there a way to fix my phone? :/
Thanks in advance...
Just try to reflash to stock using Odin.
WasifSal said:
Hello,
Last night I updated my S3 i9300 (International) while it was already rooted on stock.
After the successful update the phone was working fine for a moment, but after a while it rebooted randomly while being idle. now in the morning the phone was working the same for a while, after the occasional reboot, the phone didn't turn on, however it showed the ( Samsung Galaxy S III i9300 ) screen, loaded the logo for a while and then restarted again.
When i open the clockwork recovery, it works fine but reboots after a while.
I had a backup made from the clockwork recovery before the update and is stored on my PC (not phone).
Is there a way to fix my phone? :/
Thanks in advance...
Click to expand...
Click to collapse
Try a data/factory reset first.
gee2012 said:
Try a data/factory reset first.
Click to expand...
Click to collapse
How can i do that?
It reboots after i turn to Clockwork recovery after a few seconds...
LolzyPop said:
Just try to reflash to stock using Odin.
Click to expand...
Click to collapse
Do i need to download something or just using just odin will do it?
WasifSal said:
Do i need to download something or just using just odin will do it?
Click to expand...
Click to collapse
You do know that you need to download firmware from sammobile.com right?
Sent from my GT-I9300 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1674286
Some basics including stock rom
Use CHECKFUS not sam to download firmware .
jje
Arsaw said:
You do know that you need to download firmware from sammobile.com right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No I do not, please explain...
and if you could please explain a little bit about the procedure...
WasifSal said:
No I do not, please explain...
and if you could please explain a little bit about the procedure...
Click to expand...
Click to collapse
okay so my phone was i9300xxlh1 , at sammobile.com there are 17 different firmwares, which one do i download? :/
does the CSC matter?
You have created two threads using a different name. It obvious its you. Your asking for advice but you arnt listening and you are being rude. Liike everyone has said download the xxlh1 stock rom your phone came from sammobile then flash it using odin and that will sort out your problem. Dont worry about csc just get your phone in a working state again.
Sent from my GT-I9300 using xda premium
yldlj said:
You have created two threads using a different name. It obvious its you. Your asking for advice but you arnt listening and you are being rude. Liike everyone has said download the xxlh1 stock rom your phone came from sammobile then flash it using odin and that will sort out your problem. Dont worry about csc just get your phone in a working state again.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Oh, i am really sorry, i wasn't trying to be rude, i really appreciate the help and am listening, and thank you very much for your Advice.
The other account is my brother's, he just joined and made a thread on his own.
Related
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
postfatal said:
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
Click to expand...
Click to collapse
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
djjandy said:
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
Click to expand...
Click to collapse
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Brian_SGW_CM9 said:
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
1 tip
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
djjandy said:
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
Click to expand...
Click to collapse
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
djjandy said:
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
Click to expand...
Click to collapse
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
You can bring it back to life
Flash it with official firmware that's
It !!
Official Samsung firmwares :-
www.samfirmware.com
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
badboys8908 said:
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
Click to expand...
Click to collapse
Exactly I flash a new rom, but the rom is not good then I tried to restore my previous rom which I backed up before. While restoring, it stuck. I took out the battery. I can not enter downloading mode now so it is a big problem.
danishprakash said:
You can bring it back to life
Flash it with official firmware that's
It !!
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
Click to expand...
Click to collapse
Thank you very much, But I can not enter downloading mode now.:crying:
Anindya JV said:
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
Click to expand...
Click to collapse
I have charged the battery to full by external charger. I think I ruin the heart.:crying:
Brian_SGW_CM9 said:
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
What did he do then? Does he fix it ?
djjandy said:
What did he do then? Does he fix it ?
Click to expand...
Click to collapse
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
USB Jig will not get you into download mode either?
Warning:If you flash any ROM built on the leaked Samsung 4.0.4 ROM don't use recovery
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Brian_SGW_CM9 said:
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much.
rapatu2010 said:
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Click to expand...
Click to collapse
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
djjandy said:
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
Click to expand...
Click to collapse
Did you just flash the "Leaked - 4.0.4 I9100XXLQ5..???
If Yes then the only solution is Samsung Service Centre.
Read this:
http://forum.xda-developers.com/showthread.php?t=1756242
This leaked firmware had cause a lots of Hard Brick to other user not only you.
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Additional Info
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Do you know what kernal you had at the time, for the phone to go off during a wipe sounds like the brick bug but I didn't think it was present in LPT. Can other members clarify please. Does your phone charge when plugged into charger?
Sent from my GT-I9100 using xda premium
satish0101 said:
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Click to expand...
Click to collapse
I'm sorry but that's your fault.
It's being said 1 million times already, that wiping your data in CWM while running stock 4.0.4 ROM with a stock kernel will BRICK your phone.
Your inability to read might have left your phone bricked.
Read through the forum next time, ask questions if you don't understand anything and I can assure you will be luckier next time.
Swyped from my Samsung Galaxy SII
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
sachidanand444 said:
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
This is a sticky thread under General section warning everyone about the buck bug. Here: http://forum.xda-developers.com/showthread.php?t=1756242
I and many others have also warned people about this bug but the unfortunate thing is that most of ask these kind of questions after the problem has occurred.
Swyped from my Samsung Galaxy SII
Jokesy said:
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Er I'm not the OP
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
Will do thanks
Sent from my GT-I9100 using xda premium
^^Not only with touch CWM but also with "temporary CWM" wjich is what you were using.
Take it to a service center as your phone now needs a motherboard replacement..and I hope you still have warranty..!
Sent from my GT-I9100 using Tapatalk 2
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
Sorry dude
You might have to send your phone to device center for repairs but if you are out of warranty or wants to try to Fix things yourself, then the advise/instructions below is for you:
-boot your phone with usb jig, if you can get to download mode, then proceed to next step
-Visit this thread: http://forum.xda-developers.com/showthread.php?t=1841099
Good luck
Swyped from my Samsung Galaxy SII
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
UrbanDesigns said:
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
Click to expand...
Click to collapse
Brick bug is only present on ICS 4.0.4.
ICS 4.0.3 is safe
Swyped from my Samsung Galaxy SII
Thanks
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
satish0101 said:
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
Click to expand...
Click to collapse
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Jokesy said:
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
satish0101 said:
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
Click to expand...
Click to collapse
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks buddy.
I believe I have to send the phone to Samsung Service center then!!
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Hello guys,
After receiving positive feedback from members I have finally submitted my phone to service center.
Please pray and hope they don't find out about my little adventure!!
I had recently been flashing alot of stuff on my fone and tryin out things. But now i wqnt to go back to where i started that iw to tthe original samsung settings. Pls tell me how to do it caus my fone is really f**ked up.
F***ed up doesn't really explain what is wrong with your device. Maybe more detail would help anyone who's trying to help
Sent from my GT-I9300 using xda premium
Just flash your original saved firmware or any stock rom .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
xcly said:
F***ed up doesn't really explain what is wrong with your device. Maybe more detail would help anyone who's trying to help
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
JJEgan said:
Just flash your original saved firmware or any stock rom .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
i upgraded to jelly bean which was released for my country but my kies was not letting me upgrade for some reason. so i got the firmware from sam mobile and flashed it. but then my super user doesnt work and titanium backup etc say that device is not rooted. and also for some reason my clockwork recovery also got uninstalled. now i tried to root it again the same way but nothing happens. so maybe u could tell me how can i get it rooted again
smokerdie said:
i upgraded to jelly bean which was released for my country but my kies was not letting me upgrade for some reason. so i got the firmware from sam mobile and flashed it. but then my super user doesnt work and titanium backup etc say that device is not rooted. and also for some reason my clockwork recovery also got uninstalled. now i tried to root it again the same way but nothing happens. so maybe u could tell me how can i get it rooted again
Click to expand...
Click to collapse
Root the device with any of the methods factory reset first .
jje
If you are using cf root flash with auto reboot unchecked, then boot recovery and this triggers installation
Hai everyone nice to know you all. sorry i am newbie and bad english too. I am from Bali, Indonesian. I hope you will understand
I have a problem when to try flashing my Samsung Galaxy S3 with odin. its always said FAIL, i try to restart my laptop and still with that result. trying to format factory and its failed. did i miss something part to flash?
blackot said:
Hai everyone nice to know you all. sorry i am newbie and bad english too. I am from Bali, Indonesian. I hope you will understand
I have a problem when to try flashing my Samsung Galaxy S3 with odin. its always said FAIL, i try to restart my laptop and still with that result. trying to format factory and its failed. did i miss something part to flash?
Click to expand...
Click to collapse
How exactly did your phone end up in this state? It looks like the internal storage could be dead but I'm not sure, it might just need repartitioning.
blackot said:
Hai everyone nice to know you all. sorry i am newbie and bad english too. I am from Bali, Indonesian. I hope you will understand
I have a problem when to try flashing my Samsung Galaxy S3 with odin. its always said FAIL, i try to restart my laptop and still with that result. trying to format factory and its failed. did i miss something part to flash?
Click to expand...
Click to collapse
wow, as ArkThompson said what a mess. You do have a i9300 and your sure you flashed i9300 firmware?
If flashing is failing with standard roms from sammobile the I would try this recovery firmware.
But be warned this is a last resort and has a chance it could brick your phone completely.
http://forum.xda-developers.com/showpost.php?p=30087735
Yeah....well i dunno what happen. But my friend told me she upgrade to kitkat then its suddenly bootloop.
Ok i will try to my best.. i hope that thread will help me to fix i9300
Sent from my GT-I8262 using XDA Free mobile app
blackot said:
Yeah....well i dunno what happen. But my friend told me she upgrade to kitkat then its suddenly bootloop.
Ok i will try to my best.. i hope that thread will help me to fix i9300
Sent from my GT-I8262 using XDA Free mobile app
Click to expand...
Click to collapse
Are you sure its the i9300 model? Can you find out what she tried to flash? Sounds to me like she has flashed the wrong rom for the device.
blackot said:
Yeah....well i dunno what happen. But my friend told me she upgrade to kitkat then its suddenly bootloop.
Ok i will try to my best.. i hope that thread will help me to fix i9300
Sent from my GT-I8262 using XDA Free mobile app
Click to expand...
Click to collapse
Which ROM was she using before she flashed kitkat? Also, did she try and flash the ROM using Odin (in which case she flashed an i9305 ROM since there is no official version of 4.4.4 for the i9300) or using a custom recovery?