So I bought my new galaxy s2 (i9100 int'l version) and i flashed a stock rom that matches my carrier and country (israel) and then i rooted it
by using CF-Root kernel, now i have it for over a month and i flashed many roms with success and then when i tried to flash cm 7 from stock i got into an endless bootloop.
now if you need to know how i flashed it so here you go:
flash stock rom (2.3.5) with ODIN
flash CF-Root kernel that matches my rom (KJ1)
move the official cm 7 (cm-7.2.0-galaxys2.zip) install file onto my internal memory
reboot into cwm recovery with 3 button combo
wipe data/factory reset
wipe cache partition
wipe delvik cache
install zip from internal SD TWICE just to be sure
and then when i reboot with the "reboot device" option i get stuck on the galaxy sii screen
note: after i flashed the zip twice i also tried to reboot straight into cwm from the advanced tab and it still got stuck in the bootloop.
also when im in the bootloop i cant get into cwm with 3 button combo but i can get into download mode and i have been reading that when a thing like this happens it means its a NAND rw corruption
so does it mean i can never acomplish successfull installation of cm 7 on my device?
If you would have corrupted nand rw, you couldn't flash stock firmware with success.
Why don't you try CM9/10?
LSGio said:
So I bought my new galaxy s2 (i9100 int'l version) and i flashed a stock rom that matches my carrier and country (israel) and then i rooted it
by using CF-Root kernel, now i have it for over a month and i flashed many roms with success and then when i tried to flash cm 7 from stock i got into an endless bootloop.
now if you need to know how i flashed it so here you go:
flash stock rom (2.3.5) with ODIN
flash CF-Root kernel that matches my rom (KJ1)
move the official cm 7 (cm-7.2.0-galaxys2.zip) install file onto my internal memory
reboot into cwm recovery with 3 button combo
wipe data/factory reset
wipe cache partition
wipe delvik cache
install zip from internal SD TWICE just to be sure
and then when i reboot with the "reboot device" option i get stuck on the galaxy sii screen
note: after i flashed the zip twice i also tried to reboot straight into cwm from the advanced tab and it still got stuck in the bootloop.
also when im in the bootloop i cant get into cwm with 3 button combo but i can get into download mode and i have been reading that when a thing like this happens it means its a NAND rw corruption
so does it mean i can never acomplish successfull installation of cm 7 on my device?
Click to expand...
Click to collapse
hey ma8, try wiping data/factory reset after installing CM7 not before, then reboot phone and see
przemcio510 said:
If you would have corrupted nand rw, you couldn't flash stock firmware with success.
Why don't you try CM9/10?
Click to expand...
Click to collapse
i tried cm9 and 10 but i just mis the old day you know!
cause i haad sgs1 and i flashed any rom with no problam but i dont wanna go back to my sgs1 i just want to have cm7 on my sgs2.
Sun90 said:
hey ma8, try wiping data/factory reset after installing CM7 not before, then reboot phone and see
Click to expand...
Click to collapse
i tried to wipe after and it didn't work but i appriciate the advice
przemcio510 said:
If you would have corrupted nand rw, you couldn't flash stock firmware with success.
Why don't you try CM9/10?
Click to expand...
Click to collapse
can the problem be envolved with that fact that im flashing the rom from the internal sd card?
cause i saw some videos that people were installing cm 7 onto thier devices from the external sd and it worked for them.
LSGio said:
So I bought my new galaxy s2 (i9100 int'l version) and i flashed a stock rom that matches my carrier and country (israel) and then i rooted it
by using CF-Root kernel, now i have it for over a month and i flashed many roms with success and then when i tried to flash cm 7 from stock i got into an endless bootloop.
now if you need to know how i flashed it so here you go:
flash stock rom (2.3.5) with ODIN
flash CF-Root kernel that matches my rom (KJ1)
move the official cm 7 (cm-7.2.0-galaxys2.zip) install file onto my internal memory
reboot into cwm recovery with 3 button combo
wipe data/factory reset
wipe cache partition
wipe delvik cache
install zip from internal SD TWICE just to be sure
and then when i reboot with the "reboot device" option i get stuck on the galaxy sii screen
note: after i flashed the zip twice i also tried to reboot straight into cwm from the advanced tab and it still got stuck in the bootloop.
also when im in the bootloop i cant get into cwm with 3 button combo but i can get into download mode and i have been reading that when a thing like this happens it means its a NAND rw corruption
so does it mean i can never acomplish successfull installation of cm 7 on my device?
Click to expand...
Click to collapse
Are you sure you have I9100 or do you have I9100G? Try flashing CM9 or CM10 and report if you face similar issues.
atulalvenkar said:
Are you sure you have I9100 or do you have I9100G? Try flashing CM9 or CM10 and report if you face similar issues.
Click to expand...
Click to collapse
i flashed cm9 and 10 with no problem and i know for sure i have i9100 cause all the roms i flash are for i9100 and i flash them successfully.
Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
i have the exact same problem!
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I tried and got the samething. I also tried a different cm nightly and got the same results.
InFa_ReD_1 said:
I tried and got the samething. I also tried a different cm nightly and got the same results.
Click to expand...
Click to collapse
me2 only stock roms work for me =(
I think there was an issue with the version of CWM used on the CF-roots since it's been modified by CF and because it's an older version.
After you've rooted with CF, try flashing a kernel on there with a newer version of CWM on there (I used codeworkx's kernel from the Cyanogenmod wiki I've attached below with CWM 4.0.1.4).
Once this kernel is on there, then try flashing the CM7 ROM as per this thread. I prefer flashing from recovery myself, but it's your call.
Make sure you flash it twice in a row if you're having issues.
The problem, as stated above is that cf root kernel installs a modified version of CWM that won't work with CM7. Another thing is you have to flash a stock KH3 because KI3 has the new bootloader (unless you flashed KI3 with the old bootloaders). Then, you have to flash the codeworkx kernel so you get a compatible version of CWM. Once in CWM clear data factory reset + clear cache partition + clear dalvik cache (from advanced).
THIS IS IMPORTANT: Flash the ROM from sd card and when finish do not reboot device, just flash it again without wiping anything in between, just 2 consecutives "install from sd card". When this is done you can reboot the system and then enter again to CWM to flash the google apps .zip file that you can download from the CM7 thread.
Hope this helped. When I flashed CM7 i had exactly the same problem and went back to stock cause it was a pain in the ass to flash it fr the first time. But once you get in CM7, everything becomes great and easy, and you can update the nighlies directly from ROM manager without doing any wiping. You just can't use ROM manager when getting to CM7 for the first time.
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
droidphile said:
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
Click to expand...
Click to collapse
Thanks. Can i flash the orginal CWM over top the CF CWM?
InFa_ReD_1 said:
Thanks. Can i flash the orginal CWM over top the CF CWM?
Click to expand...
Click to collapse
I did it and didn't have any problems, just follow the steps as I posted above.
tomascunill said:
I did it and didn't have any problems, just follow the steps as I posted above.
Click to expand...
Click to collapse
Great thanks for the help it worked I'm now running CM7. One thing though I can make calls but have lost my network connection. Can someone help me with this? Sorry for all the questions I'm new to the whole smartphone business. Thanks.
Ok all fixed up thanks for all your help.
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Wipe phone
Boot to recovery go to mounts and storage format cache data and system also format sd card but this will wipe sd card .
Phone will no longer boot remove battery then replace and boot to download mode .
Via Odin flash stock rom .
jje
What kernel are you using? Go into Download mode as jje said and flash a stock firmware, then flash CF root then flash away with custom roms.
nikzDHD said:
What kernel are you using? Go into Download mode as jje said and flash a stock firmware, then flash CF root then flash away with custom roms.
Click to expand...
Click to collapse
i am using cf root kernel , and i will try to do as jje said
http://forum.xda-developers.com/showthread.php?t=1291282
xperia ray said:
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Click to expand...
Click to collapse
Flash a stock kernel+rom with odin , flash a cf-root then use clockwordmod recovery ( enter CWM manager in apps drawer and boot to CWM )
-wipe data
-wipe cache
-install zip from internal sdcard
-DO NOT REBOOT ( at least if you want CyanogenMod )
-install zip from internal sdcard (again , due to a bug)
-reboot
report back here when you try it
gr4ndm4st3r_bl4ck said:
Flash a stock kernel+rom with odin , flash a cf-root then use clockwordmod recovery ( enter CWM manager in apps drawer and boot to CWM )
-wipe data
-wipe cache
-install zip from internal sdcard
-DO NOT REBOOT ( at least if you want CyanogenMod )
-install zip from internal sdcard (again , due to a bug)
-reboot
report back here when you try it
Click to expand...
Click to collapse
not working , i already tried this method with MIUI
Which of the many versions of the SGS2 do you have?
xperia ray said:
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Click to expand...
Click to collapse
This is for the international I9100:
Data/factory reset,wipe cache, wipe dalvik cache, format system, data and cache in mounts and storage. flash cm7 twice in a row without rebooting and flash google apps.Reboot and done
Enable usb-debugging first before flashing and backup you current rom and apps.
Maybe you have a I9100G, all the roms don't work.
prodygee said:
Maybe you have a I9100G, all the roms don't work.
Click to expand...
Click to collapse
i have galaxy s2 gt i9100, unlocked international version
Hello, I hope this is the right group.
I have spent the last 2 days trying to get JB working on my SGS2. I previously had ICS Hydra h2o 1.4.1 ROM on my device.
The troubles started when I tried booting into CWM recovery. The phone wouldn't go past the yellow triangle so I had to use ODIN to flash stock Samsung ICS ROM on the phone to get it working again. I have since tried multiple JB ROMs with different kernels but most of them get past the yellow triangle but then stop on logos varying between kernels. I am also unable to boot into CWM recovery and must flash a CF-Root kernel using ODIN to get into recovery.
It is strange that this happens only with JB ROMs and I have no trouble installing Hydra h2o again through recovery.
I always use the same method of installing ROMs through CWM:
- wipe data/factory reset
- wipe cache
- wipe dalvik
- install .zip from sdcard
I have also tried fixing permissions before and after flashing ROMs, nothing seems to get me into the OS.
One ROM, Vanilla RootBox, I have found to sometimes boot all the way into the OS but the system frequently freezes and is unstable. Looks amazing tho.
Do you have any ideas on how I could get JB ROMs working with my SGS2? Is there anything I am missing?
SynGates said:
Hello, I hope this is the right group.
I have spent the last 2 days trying to get JB working on my SGS2. I previously had ICS Hydra h2o 1.4.1 ROM on my device.
The troubles started when I tried booting into CWM recovery. The phone wouldn't go past the yellow triangle so I had to use ODIN to flash stock Samsung ICS ROM on the phone to get it working again. I have since tried multiple JB ROMs with different kernels but most of them get past the yellow triangle but then stop on logos varying between kernels. I am also unable to boot into CWM recovery and must flash a CF-Root kernel using ODIN to get into recovery.
It is strange that this happens only with JB ROMs and I have no trouble installing Hydra h2o again through recovery.
I always use the same method of installing ROMs through CWM:
- wipe data/factory reset
- wipe cache
- wipe dalvik
- install .zip from sdcard
I have also tried fixing permissions before and after flashing ROMs, nothing seems to get me into the OS.
One ROM, Vanilla RootBox, I have found to sometimes boot all the way into the OS but the system frequently freezes and is unstable. Looks amazing tho.
Do you have any ideas on how I could get JB ROMs working with my SGS2? Is there anything I am missing?
Click to expand...
Click to collapse
Follow this:
-boot to CWM recovery
-wipe data /factory reset
-wipe dalvik cache (under advanced)
-format /system (under mount and storage)
-flash ROM
-flash Gapps (for jelly bean)
-fix permissions
-reboot phone
Done
Swyped from my Samsung Galaxy SII
Thank you for the reply, but that method does not seem to work either.
One thing I have noticed though is when I select wipe data/factory reset it reports an error formatting /sdcard/.android_secure.
Is this something that could be causing my problems?
SynGates said:
Thank you for the reply, but that method does not seem to work either.
One thing I have noticed though is when I select wipe data/factory reset it reports an error formatting /sdcard/.android_secure.
Is this something that could be causing my problems?
Click to expand...
Click to collapse
Nope
Swyped from my Samsung Galaxy SII
SynGates said:
Thank you for the reply, but that method does not seem to work either.
One thing I have noticed though is when I select wipe data/factory reset it reports an error formatting /sdcard/.android_secure.
Is this something that could be causing my problems?
Click to expand...
Click to collapse
which kernel u were into while flashing the JB rom?
Use siyah or dorimanx kernel it works fine for me must be your kernel
Sun90 said:
which kernel u were into while flashing the JB rom?
Click to expand...
Click to collapse
When I'm flashing I'm using XLPB kernel with CF-root. That's the kernel I flash to get into CWM when the ROMs misbehave.
SynGates said:
When I'm flashing I'm using XLPB kernel with CF-root. That's the kernel I flash to get into CWM when the ROMs misbehave.
Click to expand...
Click to collapse
try this.
after flashing Cf-root kernel from ODIN.
1) flash the .zip file of siyah kernel v3.5.2 for S2, dwnld the same Here.
2)after that reboot into siyah kernel recovery.
3) wipe data/factory reset, then wipe cache and dalvik.
4) flash the JB rom zip file(Vanilla root box).
5)reboot ur phone and see.
ps- before doing wipes and rom flash do please backup ur exsisting rom once ur into siyah kernel recovery first
Sun90 said:
try this.
after flashing Cf-root kernel from ODIN.
1) flash the .zip file of siyah kernel v3.5.2 for S2, dwnld the same Here.
2)after that reboot into siyah kernel recovery.
3) wipe data/factory reset, then wipe cache and dalvik.
4) flash the JB rom zip file(Vanilla root box).
5)reboot ur phone and see.
ps- before doing wipes and rom flash do please backup ur exsisting rom once ur into siyah kernel recovery first
Click to expand...
Click to collapse
Gives me Kernel panic or stops at the triangle loading screen. Seems the only way to get into CWM is through CF-root.
SynGates said:
Gives me Kernel panic or stops at the triangle loading screen. Seems the only way to get into CWM is through CF-root.
Click to expand...
Click to collapse
Use a newer version of siyah or dorimanx, they should work fine
Sent from my GT-I9100 using xda app-developers app
I have tried three versions of syiah, including 4.1.4 but I will try dorimanx and report with the results.
edit: dorimax kernel is the same.
One thing I noticed tough is whenever I wipe dalvik cache the system reports "unknown volume for /ext-sd blablabla" - maybe this is connected to my problem?
I am at a complete stop...
No JB kernels seem to work whatsoever. Is there any wit to flash the bootloader? Or is that even possible?
I really would like to get JB working on my device.
There must be something about the previous state of my phone, some files or folders that are in the way or are missing or somewhat. Is there any way to completely reset the phone? Not just factory resetting it since that is not working.
edit: Progress! These are my steps:
- Downloaded fresh stock Samsung ROM and another version of CF-root.
- Flashed stock ROM and then CF-root kernel.
- Booted into recovery and did the whole wipe.
- Flashed .zip twice (don't know if that did the trick or what)
- Wipe dalvik cache and fix permissions.
After that the phone booted normally and I'm now running ResurrectionRemix with Android 4.1.1, hoping it wil be awesome as ****.
Hi guys.
My phone is a international i9300
I've been searching for a problem like mine in the forum for three weeks now and I couldn't find a proper solution.
I just can't flash any rom via CWM anymore...
I can flash roms via ODIN, but when it comes to CWM, it gets stucked at Samsung logo after the install.
I tried:
Wipe cache / Dalvik / factory reset.
before the installation, after the installation, every combination possible.
Tried megawipe and no help.
Changed the kernel, Siyah, Googy, stock...
Changed versions of CWM, touch.
I have now the Phil'z 5.0.15.
I like very much the XXELK4 version from roalex with its MOD, for the call recording and full multiwindow support, but can't flash it anymore, nor any other custom or stock via CWM.
By now I can only have a full stock flashed via odin, or my Omega 46.1, wich I have a full backup.
Another solution could be find a .tar rooted and with the MODS flashable via Odin, but I really wanted to understand what's happening with my recovery.
Thank you all and congrats for the great work with the forum.
In cwm format..
Data
System
Cache
Then go to advanced and wipe dalvik cache
Then flash the rom.
Your cwm is upto date?
andrewwright said:
In cwm format..
Data
System
Cache
Then go to advanced and wipe dalvik cache
Then flash the rom.
Your cwm is upto date?
Click to expand...
Click to collapse
Sorry.
Forgot to include in the original post... I tried that too. Formatted everything
Got the 6.0.6.3
I also tried with the last Philz recovery.
And with previous versions of both too.
Have you tried to go bk to stock,root that firmware then install cwm then flash custom rom? Clean slate start.
Your problem may be a bad file download .
andrewwright said:
Have you tried to go bk to stock,root that firmware then install cwm then flash custom rom? Clean slate start.
Click to expand...
Click to collapse
Yes... didn't work...
JJEgan said:
Your problem may be a bad file download .
Click to expand...
Click to collapse
I'll try to download again, although it's not likely that several files are bad. I tried with so many different roms...
I bought another micro sd of 64gb. Maybe the one I'm using is ruining the files...
There can't be a so huge bug in philz recovery
Try install from internal sdcard, a simple 'Factory Reset before New Rom' no need to mega wipe anything.
Striatum_bdr said:
There can't be a so huge bug in philz recovery
Try install from internal sdcard, a simple 'Factory Reset before New Rom' no need to mega wipe anything.
Click to expand...
Click to collapse
Of course. And I tried with different versions of Philz' and also CWM. It can't be a bug in recovery.
Re-downloaded the revolution 29.0 and the Roalex XXELK4 rooted, copyed directly to internal and flashed... Same problem. Stuck at Samsung logo in boot. I'm begining to think my phone is screwed up. But this is so strange. I can restore my backup with no problems, and also can flash with Odin.
Is there a way to flash a .ZIP ROM in Odin?
Does not make any sense .
What model phone do you have ???
What model firmware are you flashing .
What about basic stock custom roms flashed via CWM ??
Have you booted to Philz recovery mounts and storage format sd card cache system and data then flash rom ??
Agree it is strange Deviating a little from your problem but have you tried flashing anything with TWRP recovery see if the problem persists with that.
JJEgan said:
Does not make any sense .
What model phone do you have ???
What model firmware are you flashing .
What about basic stock custom roms flashed via CWM ??
Have you booted to Philz recovery mounts and storage format sd card cache system and data then flash rom ??
Click to expand...
Click to collapse
I know it doesn't. That's why I'm going crazy.
I uploaded the screenshots with my system specs.
The model is correct, international i9300. Tried to download from the site and also directly from rommanager.
The firmwares I'm trying to flash are stock, but rooted by Roalex. I couldn't find a pure stock .zip for testing with CWM. The firmware I'm using is UBEMH5 from sammobile, wich I flashed via Odin.
Yes... Tried and formatted everything, several times, mounted, unmounted, every possible order...
Almost giving up. :crying:
tallman43 said:
Agree it is strange Deviating a little from your problem but have you tried flashing anything with TWRP recovery see if the problem persists with that.
Click to expand...
Click to collapse
I never used TWRP. Can I flash the same ROM file .zip with it or it requires it's own rom file type?
I'm gonna be out of the country for two days. When I come back I'll give it a try.
Thank you all so far.
ivansaab said:
I never used TWRP. Can I flash the same ROM file .zip with it or it requires it's own rom file type?
I'm gonna be out of the country for two days. When I come back I'll give it a try.
Thank you all so far.
Click to expand...
Click to collapse
It's been a while since i used it last time was when I had a S2 and I used it all the time:good: You can flash any rom with it that cwm can flash (as far as I know) but it had a little trouble restoring backups made with cwm but I think that got fixed.But you can make backups and loads of other things with it I recommend people to try it at least once This won't fix your cwm problem but would be interesting to see if it works
If twrp doesn't work on stock Flash googy Max dualboot kernel and keep stock as primary rom and custom as second rom. Then you have best of both world's :thumbup: also take the pic down with your emei showing :banghead: never ever show this!
What i would do in this situation is .
In recovery format cache system sd card preload .
Flash stock rom via Odin.
Check phone works ok .
Then root / flash philz recovery .
Put custom rom on sd card boot to recovery factory reset .
Then install custom rom watching setup to spot a failure point .
Wait for rom to load 10 mins fails then remove batter replace and factory reset .
Problem solved
Hi folks.
Think I figured out what's going on.
Via TWRP it says the files were corrupted, although the file sizes were identical.
I MD5 checked the files in my computer and they're ok, but when checked already inside my phone or SD they're not.
Instead of copying the files via USB cable I removed the SD card and inserted directly in my laptop slot and copyed the files. MD5 checked and they're ok...
After I tryed again copy via USB and the files were corrupted again.
I think my desktop USB or maybe the Samsung drivers are doing that.
Well, problem solved. I hope this helps other people in future problems.
Thank you all for your help and support. Keep on with the great work.
Mark solved then for other users .