CWM Flash Stuck at 50% now wont Boot? - Galaxy S II Q&A, Help & Troubleshooting

I recently atempted to flash the SGSII and when I did do it the Aroma installer got stuck at 50% then my phone turned itself off and wont turn back on at all, I cant ever recovery or download mode either ?
What do i do?

Never ever stop a rom installation I was lucky when I first flashed my first rom miui and it took to long
Sent from my PC36100 using xda premium

lreyes said:
Never ever stop a rom installation I was lucky when I first flashed my first rom miui and it took to long
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
I never stopped it, The phone just powered off. :| Is there anyway to fix this?

Seems it hardbricked. If you connect phone to charger, does it show charging animation?

przemcio510 said:
Seems it hardbricked. If you connect phone to charger, does it show charging animation?
Click to expand...
Click to collapse
nope nothing appears and computer doesnt even recognize it.

So your phone is hardbricked. Sorry.

przemcio510 said:
So your phone is hardbricked. Sorry.
Click to expand...
Click to collapse
so what can i do to fix this??

you have to use JTG plug to enter in download mode and ->odin If not - Maybe brick

wont turn back on at all, I cant ever recovery or download mode either
Click to expand...
Click to collapse
supi9, to znaczy że nie może wejść ani w reco ani w download i wcale się nie włącza.

DeanBoro said:
I recently atempted to flash the SGSII and when I did do it the Aroma installer got stuck at 50% then my phone turned itself off and wont turn back on at all, I cant ever recovery or download mode either ?
What do i do?
Click to expand...
Click to collapse
All of your posts up until this thread have been in the Xperia forums... So you're presumably a new Galaxy SII user.
What did you try to flash? (a link would be helpful)
What is the exact model number of the phone you tried to flash? (look on the label under the battery)
But my initial impression agrees with przemcio510. If you get no reaction when trying to power the phone on, nor when plugging it into an AC charger, you've likely bricked the phone, and your only options at this point are to take it somewhere that can JTag it, or go to a Samsung repair center.

supi9 said:
you have to use JTG plug to enter in download mode and ->odin If not - Maybe brick
Click to expand...
Click to collapse
there is no jtg plug
may u mean a USB-JIG or a jtag unit
anyway u can try to pull out the bat. for at least 15 minutes after that plug it back in and see what happens if it does not help try to buy a usb jig on ebay or something other if that also does not work u have a hardbricked device and just a boardreplacement or a jtag unit can save u.
thats the reason why i do not like aroma installer it can lead into serious trouble on exynos galaxy S2 devices
Sent from my GT-I9100 using xda premium

Yes I mean jig
Przemcio ja rozumiem co on pisze, ale po wtyczce podobno czasem sprzęt się podnosi. Napewno mu nie zaszkodzi
Wysłane z mojego GT-I9100 za pomocą Tapatalk

DeanBoro said:
I recently atempted to flash the SGSII and when I did do it the Aroma installer got stuck at 50% then my phone turned itself off and wont turn back on at all, I cant ever recovery or download mode either ?
What do i do?
Click to expand...
Click to collapse
What was your Rom/firmware & kernel info before flashing the new ROM?

Related

Unbrick or help!

Hello!
Im created a rom for i9001.And doesnt put a boot.img
I'm installed now my phone doesnt do anything
any idea
xewier said:
Hello!
Im created a rom for i9001.And doesnt put a boot.img
I'm installed now my phone doesnt do anything
any idea
Click to expand...
Click to collapse
More details please, as in "doesn't do anything" not booting at all, or not responsive when turned on.
Sent from my HTC Sensation
connected charger, usb, recovery, download mode doesnt work :S
Sounds like hardbrick. No charging screen?
Sent from my HTC Sensation
nope but the phone in charger warming
xewier said:
nope but the phone in charger warming
Click to expand...
Click to collapse
I assume by 9001 it is galaxy s, so Odin will sometimes flash if didn't recognize. If that didn't work unbrickable mod
Sent from my SGH-I897 using xda premium

Full BRick!

Phone will not boot, full brick. Anyone know how to remove the internal memory chip from the board and know of a device that can read it?
How did you manage this? A bit of information might be useful.
Thanks.
taygutta said:
Phone will not boot, full brick. Anyone know how to remove the internal memory chip from the board and know of a device that can read it?
Click to expand...
Click to collapse
What you do? Details
Sent from my GT-I9300 using xda premium
mardos said:
What you do? Details
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Flashed the omega rom and it just killed my phone.
No download mode
no recovery.
Not even a charging led light.
taygutta said:
Phone will not boot, full brick. Anyone know how to remove the internal memory chip from the board and know of a device that can read it?
Click to expand...
Click to collapse
This might be helpful for taking the phone apart and working out what's what.
http://www.youtube.com/watch?v=eo93EF7rVIw
I would assume the chip would need some specialist equipment to read it though :/
Donate it to Adam outler for testing his unbrickable mod.
Bad luck dude.
Sent from my GT-I9300 using xda premium
Maybe its just dead and charging is broken? Worth trying an external charger or friends device to make sure, that really is bad luck I hope to get this phone but I wont be diving into roms until I'm sure this won't happen :/
Sent from the real world by hacking into the matrix
Have you tried a JIG to get to download mode?
taygutta said:
Flashed the omega rom and it just killed my phone.
Click to expand...
Click to collapse
Note + Don't blame the ROM, it is ALWAYS the USER, as it was your choice. Nobody made you try flash it!
Is your device a international I9300 or I9300T model?
What did you mean exactly "Phone will not boot", stuck at samsung logo? or phone just won't power on?
try usb jib for S3. you should be able to go to yellow download icon mode and then flash back the old stock rom again.
taygutta said:
Flashed the omega rom and it just killed my phone.
No download mode
no recovery.
Not even a charging led light.
Click to expand...
Click to collapse
bordikun said:
What did you mean exactly "Phone will not boot", stuck at samsung logo? or phone just won't power on?
Click to expand...
Click to collapse
READ post #3
yeahitsgotahemii said:
Have you tried a JIG to get to download mode?
Click to expand...
Click to collapse
I ordered a JIG that "said" it was for the s3 but didnt work.
doki81 said:
try usb jib for S3. you should be able to go to yellow download icon mode and then flash back the old stock rom again.
Click to expand...
Click to collapse
I did more research and found one that claims to be just for the S3 and I will try it. I hop it gets to me soon I just really want the data off the phone.
I have seen a lot of brick posts with the release of this phone, crazy stuff.
how ar you trying to get into download and recovery.......and SOMETIMES, download made wont even SHOW on the screen but its still in download mode.....have you tried putting it in download mode ( even though the screen is black) and see if Odin recognizes it??
Dude try using jigs usb ... it will put ur phone 2 download mode... thn do the further flashing.....
Sent from my GT-I9300 using xda app-developers app
Ph3rOn!xX said:
Dude try using jigs usb ... it will put ur phone 2 download mode... thn do the further flashing.....
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
if we would read more he has tried and is getting another to try it out.
but still i say try to get into download mode.....Volume down+home+power
even if the screen is black, still try and plug it up to Odin....it may recognize the Com.
the2rrell said:
how ar you trying to get into download and recovery.......and SOMETIMES, download made wont even SHOW on the screen but its still in download mode.....have you tried putting it in download mode ( even though the screen is black) and see if Odin recognizes it??
Click to expand...
Click to collapse
There was one time when I was able to get the LED on while plugged in to the PC, maybe that was it .I really hope that was it but Odin did not see it.
the2rrell said:
if we would read more he has tried and is getting another to try it out.
but still i say try to get into download mode.....Volume down+home+power
even if the screen is black, still try and plug it up to Odin....it may recognize the Com.
Click to expand...
Click to collapse
I have tried every download mode and recovery, nothing works. Im not even sure if its charging. Sprint said they would try to pull the memory chip out and try to recover some data... fingers crossed
Stuck on Samsung Screen
Hi guys please help me. My Samsung S3 is stuck on Samsung Screen. The phone talks to Odin3.
You flashed Omega on a Sprint phone? There's your problem, lol.

Stuck at SE logo (BRICKed)

Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app

Bootloader has Deleted

Hello everyone!​
I have a vodafone smart 2 (alcatel v860) and i have deleted bootloader with recovery mode and after doing that i restarted the phone.
Now phone wont boot exactly, it only shows a green android logo and thats all it doesn't continue after that.
how to fix this problem
Thanks​
a7med2322 said:
Hello everyone!​
I have a vodafone smart 2 (alcatel v860) and i have deleted bootloader with recovery mode and after doing that i restarted the phone.
Now phone wont boot exactly, it only shows a green android logo and thats all it doesn't continue after that.
how to fix this problem
Thanks​
Click to expand...
Click to collapse
Thats not the bootloader you deleted.
Just boot into recoveyr and flash a rom.
Luigi2012SM64DS said:
Thats not the bootloader you deleted.
Just boot into recoveyr and flash a rom.
Click to expand...
Click to collapse
thanks but iam sure the bootloader has deleted
because i can't boot to recovery mode "power + volume up"
just white screen and the green android logo
help please
You can read this article : http://forum.xda-developers.com/showthread.php?t=2243120 . It's a complete guide for your phone!!
i don't see my problem :S
can anyone share bootloader folder ?
My Vodafone Smart II still does not work
power + volume up or down not work
ADB device not work too
any help please ​
up
if u hd deletd the bootloader... the phone wouldnt even strt...
omega101 said:
if u hd deletd the bootloader... the phone wouldnt even strt...
Click to expand...
Click to collapse
Yes, this is what happened
what i should do now
It could be some screwed up partitions but like the poster above me told you if you indeed did delete your bootloader the only way to fix it is with a riff box. I reccommend that you try reflashing the recovery the way you flashed it before and then try booting into recovery if you have any more problems pm me.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
WildfireDEV said:
It could be some screwed up partitions but like the poster above me told you if you indeed did delete your bootloader the only way to fix it is with a riff box. I reccommend that you try reflashing the recovery the way you flashed it before and then try booting into recovery if you have any more problems pm me.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
Click to expand...
Click to collapse
i trying to reflash but i have problem in "enable usb debugging "
how i can enable usb debugging and i cant go to Setting ?
You can't use usb debugging when your phone doesn't power on. But it seems like you haven't deleted the bootloader partition but most likely wiped your system partition. Can you enter your recovery?
Sent from my HTC Velocity 4G using Tapatalk 4 beta
there's a stuff called usb jig by connecting which the phone automatically enters into dwnload mode to flash a fresh fw... bt its only for samsung i guess....
search fr a similar method lyk dat.... only way to recover ur brickd phone......
Sent from my GT-I9070 using xda premium
omega101 said:
there's a stuff called usb jig by connecting which the phone automatically enters into dwnload mode to flash a fresh fw... bt its only for samsung i guess....
search fr a similar method lyk dat.... only way to recover ur brickd phone......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Like you said the USB Jig and download mode are for Samsung phone. Let me search around for a program like Odin for your phone and come back to you.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
---------- Post added at 08:47 AM ---------- Previous post was at 08:36 AM ----------
http://forum.xda-developers.com/showthread.php?t=1722811
Try reading this or your last resort could be taking it back to Vodafone if you have warranty and say that it stopped turning on one day and act dumb. Don't tell them that you rooted and played around with it and you might get a replacement.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
WildfireDEV said:
Like you said the USB Jig and download mode are for Samsung phone. Let me search around for a program like Odin for your phone and come back to you.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
---------- Post added at 08:47 AM ---------- Previous post was at 08:36 AM ----------
http://forum.xda-developers.com/showthread.php?t=1722811
Try reading this or your last resort could be taking it back to Vodafone if you have warranty and say that it stopped turning on one day and act dumb. Don't tell them that you rooted and played around with it and you might get a replacement.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
Click to expand...
Click to collapse
the link u provided seems to be legit nd might work to recover the phone... hope the user cud repair hiz phone...
Sent from my GT-I9070 using xda premium
Bootloader Recover
a7med2322 said:
Hello everyone!​
I have a vodafone smart 2 (alcatel v860) and i have deleted bootloader with recovery mode and after doing that i restarted the phone.
Now phone wont boot exactly, it only shows a green android logo and thats all it doesn't continue after that.
how to fix this problem
Thanks​
Click to expand...
Click to collapse
Hi,
Could you recover bootloader? I am also having same issue. I tried to unlock v860 mobile and when I rebooted after installing ROM my device is not booting at all.
So, have you checked devicemanager in Windows when you connect your phone with usb? Is there an unidentified driver?
Sent from my S500 using xda app-developers app
I have the same problem. I deleted bootloader from recovery. And yes on device manager it shows for about 5 sec as an unknown device. Tested win xp and win 7
Well after so many times am posting mostly just to bump this thread and seeing if anyone found a solution for this.
I still have my Smart II V860 after 1 year not working and kinda tried anything to repair it.
Was trying to put a new custum Rom to it that time and must have done something wrong at it and when did a reboot
phone got stuck on the android logo. Since then nothing worked to bring it back.
PC doesnt recognize it. If you go to device manager sometimes shows it as a modem for a few sec and just that.
Cant flash anything new couse ADB and Fastboot commands dont work couse Pc doesnt recognize the Device when conneced even why
have the right installation files for V860 while ADB is working fine with other phone i use.
I also did a home made USB Jig for it but prolly works only on Samsung devices becouse when i used it V860 just restarts
and still on Android logo and yet not recognized on fastboot or ADB.
Vodafone in here doesnt accept it for repair couse 1 year garanty contract has passed and some private mobile service companies i have tried
have not found a solution.
Looks mostly a hardbrick then softbrick to me but really dont know if anything else left to do about it.

Need help with a soft bricked GS3 please

Hi chaps,
I have a Samsung Galaxy SIII of my mates here thats stuck on the boot logo, my mate has already had a go at fixing it with odin with no joy.
I can get it into download mode ok and have odin downloaded ready, i have a feeling he has wiped the operating system and bootloader off :silly:, need some advice on how best to proceed with this one.
The details inside the phone are as follows
MODEL GT-I9300
FCC ID A3LGTI9300A
SSN:-I9300GSMH
IMIE354244/05/981362/2
S/M RF1CABR307M
Thanks in avance
I have tried installing UK factory software using odin 3.07 and 3.09 with no joy, as soon as it trys to write it fails, i thing maybe the bootloader is damaged or missing, how do i fix that?
Try the rescue firmware, from general forum with the pit.
If that doesn't work then the emmc chip is damaged.
Without bootloader the the boot would be a hard brick, it is what runs download mode so it's still there.
boomboomer said:
Try the rescue firmware, from general forum with the pit.
If that doesn't work then the emmc chip is damaged.
Without bootloader the the boot would be a hard brick, it is what runs download mode so it's still there.
Click to expand...
Click to collapse
Ok mate will give that a go thanks:good:
Hummmmmm not working might just be dead......................
jammychap said:
Hummmmmm not working might just be dead......................
Click to expand...
Click to collapse
Try older samsung usb drivers
Sent from a stolen phone!
shivadow said:
Try older samsung usb drivers
Sent from a stolen phone!
Click to expand...
Click to collapse
Okayyyyyyyyyyyyyyyyyyyyyyyyy where do i get them from wont the later ones re-instal when i plug the phone in?
Nope tried 1.4.8.0 usb drivers, still failed on write
In this link you should find everything you need. The zipped driver is older than the .exe and older than the driver you have. It is also the one that works for me.
https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
Just to be clear its the samsung_usb_driver.1.3.1500.zip
Sent from a stolen phone!
Cheers mate
Sent from my LG-D855 using Tapatalk
jammychap said:
Cheers mate
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Any progress?.
Sent from a stolen phone!
Not after I threw my laptop across the room last night lol, killed the hard drive oops
Sent from my LG-D855 using Tapatalk
That might not be the best way to get a phone working...
Sent from a stolen phone!
I know kind of peeeeeeeeeed off yesterday, will have a go on the wife's lappy soon
Sent from my LG-D855 using Tapatalk
Just got my lappy sorted so gonna have another go at it................................
I have been looking into this phone a bit further, tried the pit method but it hangs on getting pit, installed adb toolkit but found i can't do much because the phone is stock, USB debugging is not on and phone won't boot or go into fastboot menu hummmm Mmmmmmmmm, pc is fixed by the way lol.
Sent from my LG-D855 using Tapatalk
Can you get into download mode or recovery??
Sent from my Sparkle V using XDA premium app
No recovery on phone as its stock, but download mode is ok, drivers installed on pc ok just need USB debugging activated
Sent from my LG-D855 using Tapatalk
It's my mates phone and factory standard but I do believe he has had a go at it and must have locked me out of fastboot
Sent from my LG-D855 using Tapatalk
So i have a s3 i9300, its my friends actually and yesterday all of a sudden it just went like this ( see picture ) now its just constantly staying like this, every few seconds the screen goes black and then the same screen again its doing this over and over until battery is taken out. When battery is replaced it just does this same thing again. I can get into download mode but when i press volume up button it just goes back again to the same screen. Also cant get into recovery. Can anyone help? Thank you!

Categories

Resources