Hi guys.
Been a while since i posted on XDA and I've kinda fallen behind with what to flash, in what order, what's hot and what's not.
As the title states, I am still running Android 2.3.5 on my SGS2 and would like to chuck ICS on there.
Any help would be awesome.
Cheers
CaNsA said:
Hi guys.
Been a while since i posted on XDA and I've kinda fallen behind with what to flash, in what order, what's hot and what's not.
As the title states, I am still running Android 2.3.5 on my SGS2 and would like to chuck ICS on there.
Any help would be awesome.
Cheers
Click to expand...
Click to collapse
Just flash any ICS ROM of your choice
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
job jobbed.
cheers
Related
Hi.
I just got a s2, it a software problem so i flashed it with stock 2.3.4.
First i noticed that it can only find the operator Telenor (Swedish vodafone), but i use operator called Tele2 and/or Telia.
I've tired flashing both cm10 and stock 4.0.3, but no change. I've wiped all i could find, but still no change.
Later, i noticed that it did not respond on usb, it just start charging. I've searched and that seams to be quite a common problem, but non of the fixes i found has worked. (factory reset, *#7284# set to modem and back to pda m.m.)
I've tried with several cables.
this is really bugging me, because i don't have a Telenor sim, and don't want one.
I could use wifi tethering via my SE Xperia Arc, but it runs CM10 and tethering dose not work at this moment.
Hope someone can help me get my phone up and running as is should.
Thanks in advance!
Oh, forgot. It's an i9100 and when i check simlock (*#7465625#) it says everything is off.
Nobody?
Nolimited said:
Nobody?
Click to expand...
Click to collapse
If your system has a USB 3.0 port, then connect your phone to it.
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Still only charging
Nolimited said:
Still only charging
Click to expand...
Click to collapse
Try to clean your charging /micro USB port with a tooth brush
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Already have, didn't help :/
SII has USB 2.0, so connecting it to 3.0 won't solve the problem.
przemcio510 said:
SII has USB 2.0, so connecting it to 3.0 won't solve the problem.
Click to expand...
Click to collapse
on laptops with old motherboards, connecting the phone to the USB 2.0 port will only charger it. I've seen this myself
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Hi I can't post in the actual forum as not posted enough on XDA, so I am asking if anyone can help that has this rom or the dev etc.
Just no idea where the power saver mode has gone and I have searched the thread a few times to see if anyone else uses it and has asked about it. I checked where it is in the JellyB updates and it isn't there. It isn't where it used to be and I wanted to know whether it was included in the rom.
I was using foxhound 0.2 before that had the best application of this function where 3g/wifi would turn off when screen switched off and back on when back on etc.
I wanted to know whether this rom would be having it or does have it etc. Or if anyone knows any other AOKP JB rom with the features of Jelly King and the power saver still included (if it isn't of course in there and I am just being an idiot who can't find it)
Thanks in advance if anyone can help.
Settings - ROM control -
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Hey guys, I have problem with my 3G, it is very unstable, what should I do? It is not my carrier, my friends with other phones dont have that problem...
The best solution is post in Q & A section..
Unless you do not provide ROM/Kernel/Baseband version no one can help you.
Try flashing another baseband firmware and get the corresponding Radio Interface Layer version for your Kernel.
prof.kiwi said:
Hey guys, I have problem with my 3G, it is very unstable, what should I do? It is not my carrier, my friends with other phones dont have that problem...
Click to expand...
Click to collapse
First you need to post your ROM details. Goto Settings - About, and post everything you see
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Looking at my phone today I started thinking That as I always stick Go Launcher on it ( I like my shortcuts in folders) and a few other GO apps. Am I really getting any benefits from a custom ROM.
Maybe a standard ROM with the GO stuff added would be just as good. Then I know they will always work.
Problem is I can't stand all the 'Samsung' crap that comes with them. Kies and their 'shops'
Maybe a cut down 'standard' ROM will work.
BorgCymru said:
Looking at my phone today I started thinking That as I always stick Go Launcher on it ( I like my shortcuts in folders) and a few other GO apps. Am I really getting any benefits from a custom ROM.
Maybe a standard ROM with the GO stuff added would be just as good. Then I know they will always work.
Problem is I can't stand all the 'Samsung' crap that comes with them. Kies and their 'shops'
Maybe a cut down 'standard' ROM will work.
Click to expand...
Click to collapse
You can always remove those apps you don't need on an UNmodified firmware. You only need root access
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.78
GT I9100
Next phone: Galaxy NOTE II
I suppose thats where Titanium comes in handy.
BorgCymru said:
I suppose thats where Titanium comes in handy.
Click to expand...
Click to collapse
Yeah
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.78
GT I9100
Next phone: Galaxy NOTE II
what is difference between "galaxys2" and "i9100 intl". on cyanogenmod site? help?
Because i dont get iit because you have in the list on github 'galaxy s2' (that where you go when you look in devices and click on galaxy s2 you go to github but it only goes to cm9)
And i look in the list on the left i see 'i9100' that also a galaxy s2 so i look it says international version and has cm10. So what is that i dont get it? Whats the difference?
I know it has cm10.1 bit why not on official CM site?
Sorry for al my mispels i write terible.
I9000 is the samsung galaxy known as the captivate.
I9100 is the samsung galaxy S2 upgraded verion of the samsung galaxy.
there are big difference in the how the phones are constructed.
cm10 is the newest version and deleveloped based on the latest software.
cm9 is anolder version based on gingerbread.
as to your other question cannot understand what you are trying to say.
Cosmic Blue said:
I9000 is the samsung galaxy known as the captivate.
I9100 is the samsung galaxy S2 upgraded verion of the samsung galaxy.
there are big difference in the how the phones are constructed.
cm10 is the newest version and deleveloped based on the latest software.
cm9 is anolder version based on gingerbread.
as to your other question cannot understand what you are trying to say.
Click to expand...
Click to collapse
Cm9 was ics
Sent from my GT-I9100 using xda premium
Cosmic Blue said:
I9000 is the samsung galaxy known as the captivate.
I9100 is the samsung galaxy S2 upgraded verion of the samsung galaxy.
there are big difference in the how the phones are constructed.
cm10 is the newest version and deleveloped based on the latest software.
cm9 is anolder version based on gingerbread.
as to your other question cannot understand what you are trying to say.
Click to expand...
Click to collapse
Sorry i ment the i9100. LoL
And other question is does mhl out work on cm10 on thr galaxy s2.? And usb host?. Cant find any awnser on google for that.
Will change title sorry my fault it about galasy s2 and i9100 intl , on cyanogrenmod. This are the same phones? But the galaxy s2 goes to cm9 not higher and i9100 cm10, and still for me this are the same phones......
I dont get it. Why there are 2 different for the same phone
reggiexp said:
Sorry i ment the i9100. LoL
And other question is does mhl out work on cm10 on thr galaxy s2.? And usb host?. Cant find any awnser on google for that.
Will change title sorry my fault it about galasy s2 and i9100 intl , on cyanogrenmod. This are the same phones? But the galaxy s2 goes to cm9 not higher and i9100 cm10?
I dont get it. Why there are 2 different for the same phone
Click to expand...
Click to collapse
cm10 is newer version of the foirmware and will work on sgs2. It is an upgrade of cm9.
Since it custom firmware, you must make the choice to flash it or upgrade it. Does not come as stock firmware or automatically upgradeable via kies.
Cosmic Blue said:
cm10 is newer version of the foirmware and will work on sgs2. It is an upgrade of cm9.
Since it custom firmware, you must make the choice to flash it or upgrade it. Does not come as stock firmware or automatically upgradeable via kies.
Click to expand...
Click to collapse
euh dont think you get it.
sorry but my question is on hte github on cynaogenmod where you download roms, there are 2 galaxys2
one is named galaxys2 and the other i9100
so when i press ggalaxys2 i get only cm9.... so i click then on the i9100 and goes to page there is writen galaxy s2 international version.....
and has cm10
so why does the galaxys2 dont have it?
okay im telling it wrong,
but still thx to awnser me but i know every thing about custom roms etc...
but don,t get why cyanogenmod has 2 names from one phone.
but i dont care XDA has more fun roms.
you have a galaxy s2? do you know if hdmi out (or mhl out) and usb host works on non stock based roms like cm10 etc...? cant find a awnser for that
Mhl only properly works properly (mirrors display) on stock Samsung ROMs on other ROMs only local videos and YouTube videos play through mhl
1Chef said:
Mhl only properly works properly (mirrors display) on stock Samsung ROMs on other ROMs only local videos and YouTube videos play through mhl
Click to expand...
Click to collapse
Thx. And usb host works on other roms?like cm10 etc?
Doesnt matter anymore
Aint gonna get the gs2...
My operators aint selling it anymore... and sold them all...
****k....
So im stuck with my **** lg optimus 2x
Cosmic Blue said:
I9000 is the samsung galaxy known as the captivate.
I9100 is the samsung galaxy S2 upgraded verion of the samsung galaxy.
there are big difference in the how the phones are constructed.
cm10 is the newest version and deleveloped based on the latest software.
cm9 is anolder version based on gingerbread.
as to your other question cannot understand what you are trying to say.
Click to expand...
Click to collapse
CM10 is based on JB
CM9 was based on ICS.
CM8 was reserved for HC but was never used.
CM7 was based on GB
And the users question has nothing to do with the I9000.
I wonder the same thing actually. On cyanogenmod download page there are both galaxys2 and i9100.
galaxys2 have cm9
and i9100 have cm10 nightlies
Links: (cant post actual link without 10 posts)
galaxys2 - download.cyanogenmod.org/?device=galaxys2
i9100 - download.cyanogenmod.org/?device=i9100
My phone:
Model: GT-I9100
Baseband: I9100XXLPX
CPU: ARMv7 Processor rev 1
I'm from Sweden.
So with my phone, should I download cm9 from galaxys2 or would cm10 work from i9100 page?
Anyone understands me?
Thanks.
Both would work
But please do a full wipe before flashing if you are not already on cm to avoid problems
TheATHEiST said:
CM10 is based on JB
CM9 was based on ICS.
CM8 was reserved for HC but was never used.
CM7 was based on GB
And the users question has nothing to do with the I9000.
Click to expand...
Click to collapse
CM 10.1 is Android 4.2
CM 10 is 4.1(JB)
Using GT - I9100
Just hit the damn help button if I helped you.
I get You!
davveh said:
I wonder the same thing actually. On cyanogenmod download page there are both galaxys2 and i9100.
galaxys2 have cm9
and i9100 have cm10 nightlies
Links: (cant post actual link without 10 posts)
galaxys2 - download.cyanogenmod.org/?device=galaxys2
i9100 - download.cyanogenmod.org/?device=i9100
My phone:
Model: GT-I9100
Baseband: I9100XXLPX
CPU: ARMv7 Processor rev 1
I'm from Sweden.
So with my phone, should I download cm9 from galaxys2 or would cm10 work from i9100 page?
Anyone understands me?
Thanks.
Click to expand...
Click to collapse
I get you! Though I have no clue why did they do that I can recommend you to go for cm10.1 or CM10 from "i9100"! galaxys2 is for the old cm9 version... I suppose they did it so because the galaxy S2 still didn't get its official jb update and some people still prefer ics hence they dont wan't to stop development for cm9 for s2 and merge it! I suppose after the official jb is released they'll merge it with i9100! Don't forget to thank!
eskimobster said:
Both would work
But please do a full wipe before flashing if you are not already on cm to avoid problems
Click to expand...
Click to collapse
Okey nice, thank you. Yeah ofc
iowntheworld said:
I get you! Though I have no clue why did they do that I can recommend you to go for cm10.1 or CM10 from "i9100"! galaxys2 is for the old cm9 version... I suppose they did it so because the galaxy S2 still didn't get its official jb update and some people still prefer ics hence they dont wan't to stop development for cm9 for s2 and merge it! I suppose after the official jb is released they'll merge it with i9100! Don't forget to thank!
Click to expand...
Click to collapse
Hehe
Yeah that sounds like a reasonable explanation. Thank you
to avoid any problems
just search on xda cm 10.1 thread
and download it from there it would be easier