Anyone else facing the same problem on this version? Any solutions ? Just removed the orange imm76d.i9300bvblg2 rom and installed the unbranded latest uk XXBLG8 rom which is now giving this error on kies. Used to work fine on the orange rom. Mobile is unrooted and stock rom is flashed.
I think that the leaks can't be upgraded by kies. you should install the latest JB rom using odin
I know the leaks can't be upgraded. I meant the official updates.
sorry, i thought it was LI8 (the last leak before poland official JB)
to upgrade, you would need to have the poland CSC, it can be changed *#272*your_IMEI#
then you have to select the poland CSC:XEO
first BACKUP in the external SD because doing this you would lose everything in the internal SD (including tithanium backups)
sorry for my english
Please read my post. Im not looking to go to JB as there is no UK version and its not fully stable. I have the latest XXBLG8 uk version and was looking at the official updates for this version. Thanks
you can not get official update because your product code does not maches your rom.
You have to stick with ODIN or Use orignal orange rom.
muhammad.ali123 said:
you can not get official update because your product code does not maches your rom.
You have to stick with ODIN or Use orignal orange rom.
Click to expand...
Click to collapse
It was due to the csc being KOR. Once i changed this to BTU the problem was resolved. Even though the rom was a BTU rom in the first place. Thanks for your help anyway.
Related
Hi all,
I am from Singapore and i want to revert my GA to its stock rom. Just like how i can update using Kies.
Should i use the samfirmwares - Under provider Rom?
Regards
Don
Dude you are right. Use the files from samfrimware.com and use odin to flash it back 2.2.1
Thanks for your reply.
I flashed it back to 2.2.1. As i was previously on VillianRom, I downgraded to Asia Firmware - S5830ZTKB2.
But now when i start KIES, it says this device cannot be updated.
??
Basically I just want to return to my stock rom so that i can update through kies. Anyone can help please?
Hi Guys,
i get the new "bad" i9100G -->G<-- i tryed to root with the wrong kernel and bricked it, but i could fix it some hours later with this rom:
I9100GXXKL5 2011 December I9100GXEFKL3 France (La poste mobile) from sammobile
So i got differnt problems:
-im from Germany and with this french stock rom, my Kies dont accept updates für my mobile, my original stock rom ends with XXLA1 but i cant find this one anywhere...
-i still got an unrooted sucking s2G
So PLZPLZPLZ help me out with a suiting stock rom, so that i could update with Kies to newest version and restart rooting
or give me an other tipp how i can get an working minimal customized rooted i9100G with the actual french version.
thanks
I have added yours on Check Fus (http://fus.nanzen.se/) earlier today, so it will be available soon with Check Fus Downloader and on sammobile.
The French stock rom is the latest one available and should be close to the German one, so I guess it's normal if Kies don't show any updates.
EDIT: Actually someone uploaded it
http://forum.xda-developers.com/showthread.php?t=1505270
if tryed much out the whole day with different results, but noone was accaptable.
my actual stand is:
-flashed india rom I9100GXWKJ2
-rooted this rom with DooMLoRD_v4_ROOT-zergRush-busybox-su
-thought that this rom suxx and flashed back to french
result: french rom with SU but nothing else ( no CWM (( )
if anyone got an working kernel with CWM for this french ROM I9100GXXKL5 or other ideas plz PM me thanks
btw is it possible to delete this many trash system apps with ONLY SU?
and if its not possible to update SU, is it broken? perhaps it wont work with the flashed ROM
Ok final update:
I9100GXXKL5 2.3.6 france FW is now accepted via Kies, perhaps i got it to early
Flashed MyGKernelV1.1.1_CWM5 via Odin
Now everything works like i wanted for the last 3 days its rooted + SU r/w permissions etc, only CWM is missing but im done for now^^
gl if anyone else trys the same
I bought the phone in January sim free, for full price from my local mobile phone store. It is running stock android 2.3.4 (build number: GINGERBREAD.XWKI4). Its been in the online news a lot that ICS would be available by the end of Q1 but still, i am unable to update. I get a message saying my firmware is the latest available.
I live in New Zealand and as far as i understand you (USA) have ICS but what about for me? I'm assuming my phone is the international version so i thought i would have the update by now.
So does anyone know the full story?
Thanks
ICS hasn't been released by any of the NZ telcos yet (I checked with Checkfus). You can pretty much run any ICS stock (or custom for that matter) rom you want. Lots of Odin (mainly stock roms) & CWM flashable (mainly custom) roms on here (search the development sections).
One thing to bear in mind if you do flash a stock ICS rom from another region tho, you may have problems getting updates via Kies in future. If that happens, you'd need to flash a stock rom for your region in order to get Kies updates again. Or you could do what the majority of people on here do, bypass Kies completely (horrible excuse for software) & flash all your roms manually.
As long as you've got an I9100 or I9100T you can flash any firmware for these phones.
Fellow Kiwi here mate, just flash any ics rom thru odin. I've had no issues whatsoever, the latest Lp7 rom with speedmod kernel is the best I've had. You wont regret it.
I'm with telecom, they wont update anything quickly at all.
Hope this helps your decision
Hey guys,
I recently rooted my S2 and installed a custom ROM because i was sick of waiting for Samsung to release ICS in my region ( Also i love stock ICS ).
Recently they released ICS in my region so i went to sammobiles to download the firmware.
My Question is that do PDA and CSC change for each new version of android released or am i supposed to wait for the firmware with the same PDA and CSC as the version i was using.
Also I wanted to know if I could flash firmware of different region on the phone without it having any errors
Thank you.
Mysterious99 said:
Hey guys,
I recently rooted my S2 and installed a custom ROM because i was sick of waiting for Samsung to release ICS in my region ( Also i love stock ICS ).
Recently they released ICS in my region so i went to sammobiles to download the firmware.
My Question is that do PDA and CSC change for each new version of android released or am i supposed to wait for the firmware with the same PDA and CSC as the version i was using.
Also I wanted to know if I could flash firmware of different region on the phone without it having any errors
Thank you.
Click to expand...
Click to collapse
u can flash any stock rom ...
The only small issue you might face if you flash stock firmware for a different region is you may not be able to get OTA updates for your region when they're released. But it's easy enough to flash them via Odin so this isn't a massive problem.
MistahBungle said:
The only small issue you might face if you flash stock firmware for a different region is you may not be able to get OTA updates for your region when they're released. But it's easy enough to flash them via Odin so this isn't a massive problem.
Click to expand...
Click to collapse
What if i flash a firmware for a region i will be going to.
Will I get OTA updates if i access the update list from that region ?
Hi Guys
I have a SGSII, which I got in Hong Kong a couple of years ago. It came pre-installed with Stock Samsung Firmware ICS 4.0.3. I currently living in the UK and was wondering if I did a Firmware update using Kites, would it install you UK version of the firmware instead of the HK version?
If it's got the HK firmware/CSC on it, it will update to the latest for that region; where you are now is irrelevant, it reads the CSC info off the phone to determine what firmware to upgrade to, assuming there is a later firmware for that region.
But it's a moot point. Why would you use Kies for anything ? Flash whatever stock rom for whatever region you want with Odin.
MistahBungle said:
If it's got the HK firmware/CSC on it, it will update to the latest for that region; where you are now is irrelevant, it reads the CSC info off the phone to determine what firmware to upgrade to, assuming there is a later firmware for that region.
But it's a moot point. Why would you use Kies for anything ? Flash whatever stock rom for whatever region you want with Odin.
Click to expand...
Click to collapse
To be honest, I am a noobie when it comes to the advanced aspects of android devices. So I've always followed the mantra of always following the manufacturer's instructions to the letter. Also I don't want to loose all my user data for my game of Asphalt g