People!, I'm about to pull all my hair out on this one
Vibrant is soft bricked in a boot loop after a incomplete flash, I am able to get it into download mode but both my windows machines say USB device isnot recognized, and thus, I cant use ODIN to return to stock. When I try to manually point windows to the samsung drivers I get nothing…
So far I have tried drivers from:
-Bay_wolf's AIO Vibrant Toolbox 2.5
-USB drivers for vibrant from samsung support site
-Drivers from samsung keyes
Side notes that might help: I was perviously using a Hellybean Rom. My device displays "Galaxy S gt-9000" on boot... not sure when that came to be but maybe some rom changed some important recognition stuff??...
I found this thread http://forum.xda-developers.com/showthread.php?t=1008383 but no help...
Any help would be greatly appreciated!!
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Toast6977 said:
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Click to expand...
Click to collapse
Thanks a ton for reply but, sadly, no dice.
Tried connecting the phone, getting the "unrecognized device" prompt, finding "unknown device" in device manager, right clicking to uninstall. rebooting my machine, using various install methods to re-install drivers, re-connecting, and nothing.. same issue...
I lost the original cable a while back, but can't accept that NONE of the other 5 cables used are all broke... specially if the computer recognizes something going on... is it worth buying a new one?
Losing hope here, been like this for 4 days now, think it's time to go get a new phone. :crying:
Even so, it would have been nice to get what was a perfectly working phone back if only to keep it as a mp3 payer.
If anybody in New York, NY has a working odin set up that can do this for me, I have a 6 pack of your favorite beer with your name on it.
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
For what its worth, the gt i9000 screen appears after your on a custom GB boot loader and Odin back to stock (or probably Odin flashing any other ROM) you can change it by flashing the GB boot loader again. My phone says its a i9000 too, but I'm just about lazy enough to not bother changing it, lol.
So that's unrelated.
eksasol said:
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
Click to expand...
Click to collapse
Ok, faith momentarily restored. But I have questions:
-What do you mean when you say "check the option to also delete USB driver and uninstall any drivers"? I dont get such a prompt from right clicking on "unknown device" and selecting uninstall? Is there another method to uninstalling drivers?
-In the link attached, I can only find "Device(Install),USB Driver (Software) (ver.1.0)" not the 1.5.3 version mentioned. What am i doing wrong here? currently searching google for the 1.5.3 but finding nothing.
I get into download mode by holding volume- up + power. Have 2 PCs ( win xp and win 7) and a mac running mountain lion (but never ever have been able to get Heimdall to work, so devoting time to odin.)
Thank you for the time + help, guys, I really do appreciate it in the time of utter un-nerdness.
If the device is already installed it will have a check box that said "Delete the driver software for this device." If its unknown then obviously not. By "uninstall any driver", I mean uninstall any Android drivers you current have installed and reboot before you reinstall the new driver.
Although I doubt it will make a difference than the one I linked above, you can try the Samsung driver version 1.5.3: http://www.mediafire.com/?r0uc3h413qcy80z
If you did manage to get into download mode and see this: http://images.google.com/search?num=10&hl=en&site=&tbm=isch&source=hp&q=download+mode
Then it mean there is a very good chance you can restore the phone, if you can find a computer to recognize it and Odin to see a COM port.
I definitely think it would be worth the money to go buy an OEM USB cord. I can't tell you how many times I have seen this and a new USB is the fix.
sent from the depths of helly bean
OK guys...
My friend, who also owns a Vibrant, let me borrow the cable that came with the phone for the last 2 days.
Tried to make ODIN work on both PCs at home, gave Heimdall a shot on my mac, even hijacked a computer at work for the better part of the morning and freshly installed USB drivers 1.5.3 before connecting. All for nothing... “Unknown device” across the board....
At first I felt that with being able to get into download and have SOME kind of a reaction from connecting to PC had to be a good sign. Almost completely convinced that there is some unknown, unworkable hardware problem present. Definitely, officially, unremarkably out of ideas here.
Nothing is beautiful and everything hurts.
Last thoughts? Options at this point?
Also, tried One-click Unbrick tool on mac. I got a "is your phone plugged in, is it on download mode?" error, but anyone reading this down the line with a similar problem should check it out.
http://forum.xda-developers.com/showthread.php?p=15330252
Related
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.
I might have missed the perfect advice in searching here and there, but I couldn't find it, so I'm asking here.
I tried applying a nightly build for Cyanogen for Vibrant and now the phone is basically bricked.
It starts up, shows the Vibrant logo, brightens a bit, then shows a screen that in a second or two fills with random color noise, then restarts. This cycle repeats until I pop out the battery.
My model apparently won't respond to vol/power keypress combos to activate recovery or download mode so that was out.
I bought a microUSB jig and was able to get in download mode but ODIN doesn't ever recognize it.
I tried the adbtool to send it into recovery but it doesn't see the phone either.
I tried the AIO Vibrant Toolbox to reinstall drivers/odin/etc and it didn't help.
Finally just watching device manager seems to indicate that plugging it in and out doesn't absolutely nothing. Windows XP never sees a connection. I tried on a Windows 7 machine with similar results.
Any suggestions? Out of warranty so that means no replacement.
Thanks.
Kermit Woodall
Since you flashed cm7 you will need to install the Nexus S drivers. The regular Vibrant drivers will not work so that is likely why ODIN wont recognize the device. If you can get into download mode you shouldn't be hard bricked. Here is a link to download the Nexus S drivers (I believe this is the one I used)
http://dl.dropbox.com/u/8116690/Nexus S drivers.zip you might have to manually install this.
jordanjf86 said:
Since you flashed cm7 you will need to install the Nexus S drivers. The regular Vibrant drivers will not work so that is likely why ODIN wont recognize the device. If you can get into download mode you shouldn't be hard bricked. Here is a link to download the Nexus S drivers (I believe this is the one I used)
http://dl.dropbox.com/u/8116690/Nexus S drivers.zip you might have to manually install this.
Click to expand...
Click to collapse
This. If you are able to enter into Download Mode, you aren't bricked (unless you have a really really really bad luck).
This was extracted from the CM7 Q&A Thread on the Q&A section:
atinm said:
Q: Where can I get the Nexus S drivers?
A: Download and install the Android SDK here then download "Google USB Driver package, revision 4"
Once downloaded, right click on "Computer", "Manage", "Device Manager", "Nexus S", "Update Driver Software", and point it to wherever you isntalled the SDK
Click to expand...
Click to collapse
Also, if the above fails, the member connexion2005 offers unbrick services, and he seems to be good at it, he have a website and everything, just shot me a PM if you need the link to the website.
djluis48 said:
This. If you are able to enter into Download Mode, you aren't bricked (unless you have a really really really bad luck).
This was extracted from the CM7 Q&A Thread on the Q&A section:
Also, if the above fails, the member connexion2005 offers unbrick services, and he seems to be good at it, he have a website and everything, just shot me a PM if you need the link to the website.
Click to expand...
Click to collapse
Djluis, Good write up and assist...........
Thanks - I did try the above but when my phone is connected via USB the computer doesn't react at all. It's like I haven't plugged anything in. My other phone, a Nexus One, is recognized though.
Any ideas on how to force the install of these drivers before I have to pay connexion2005 for his services?
Thanks.
Kermit Woodall
Uninstall Samsung drivers, reboot PC, install drivers from aio box found in sticky thread or from samsung website. It should work. Also try heimdall if odin still doesn't work.
Sent from samsung vibrant
Tried the uninstall - no luck.
One issue... I'm not sure that USB Debugging Mode was selected before this all started. Could that be my problem?
Kermit Woodall
Hi,
try a different usb port and different usb cable
No luck. I suspect that this unit has a slightly bad USB port as well. Fortunately unbricking is affordable so that's what I'll have to do.
Thanks everyone for your advice.
K
kwoodall said:
No luck. I suspect that this unit has a slightly bad USB port as well. Fortunately unbricking is affordable so that's what I'll have to do.
Thanks everyone for your advice.
K
Click to expand...
Click to collapse
go to best buy, get a blackberry or HTC usb cord. most if the "bad" usb ports are the sh*T%y korean cords ( not knocking the people, just the company )
Thanks - I actually tried several USB cables - including some HTC and a Motorola one. None worked w/the phone - but worked fine with any other phone.
K
So, My SGS2 was fine, just a few problems with connecting to my MacBook Pro (bootcamped Win7 & Odin), but after a few attempts it would always connect. I tried to update a rom to the new leaked ICS build via Mobile Odin, but something went wrong and all the charging images failed drawing.
Anyways, yesterday I tried to flash a recovery image via odin, to get back to my NAND and it failed halfway through (dodgy connector on SGS2).
Tried it a second time, and failed on flashing kernel.
I can access download screen, but windows refuses to recognize the phone, installing drivers for a "unknown device".
Tried flashing a kernel through OSX Lion and Heimdell, but it keeps failing to either find a device in download mode, or "claiming interface failed"
I've brought a new cable, but i have a feeling my USB port on the SGS2 has gone. Any help? Insurance most likely won't cover because it now says (2 Custom Binary Downloads) and they don't cover, and surely warranty has voided too.
Please help?
I will make a donation to the the person who can help me.
new leaked ICS build via Mobile Odin
Thats a test pre beta build guess its the problem .
Looks a usb driver problem that what you try .
remove Kies reboot reinstall Kies connect phone in download mode and let windows find drivers .
jje
try reinstalling kies. Or better yet use another computer for flashing. Can you boot into recovery mode? If so try flashing a custom rom to try to boot up your phone for the mean time
Sent from my GT-I9100 using xda premium
@JJEgan
Kies idea isn't working. My guess is the fact its 64bit Win7 on MBP bootcamp.
Or at least I'm hoping. Won't get to a desktop computer till monday, so had to buy a cheap backup phone.
@ephraim033
Flashing the new rom removed recovery, and can only access download mode.
I just get a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
So far, I have noticed I either restart the computer (after uninstalling failed "unknown device" driver) and/or leave it for a while, and bam, it searches for drivers for the phone when I retry , but it seems to be related to pure luck with the positioning of the cable into the phone.
I have cleaned it several times with canned air and computing alcohol (i wont dare spell the name of it, and don't have the bottle to hand right now) so dust and debris is not the issue.
Edit: the failed driver comes up with "Windows has stopped this device because it has reported problems. (Code 43)" so I'm guessing i have to uninstall and reboot each time I try?
SOLVED. Have found the issue. Uninstalled KIES and all drivers. MEGA DEEP clean with a brand new dry tooth brush (infront and behind the protrusion within the usb port on both the phone and laptop).
Several reboots on both phone and laptop.
Second try, installed serial gadget and Samsung drivers automatically, installed CWM.
Many thanks
Danifamous said:
SOLVED. Have found the issue. Uninstalled KIES and all drivers. MEGA DEEP clean with a brand new dry tooth brush (infront and behind the protrusion within the usb port on both the phone and laptop).
Several reboots on both phone and laptop.
Second try, installed serial gadget and Samsung drivers automatically, installed CWM.
Many thanks
Click to expand...
Click to collapse
Glad you fixed it mate
Sent from my GT-I9100 using xda premium
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app
Thanks for your response.
Yes, USB Debugging is enabled.
Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.
Ok I just tried to make a factory reset, nothing changes...
Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.
Anyone ?
Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104
Work for me too! THX
Thanks for your help !
Unfortunately it didn't work for me.... :/
Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/
Up
I still have the same problem. No other ideas please ?
? :/
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help
Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem
Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.
have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers
Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Answer
Lucho505 said:
Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Click to expand...
Click to collapse
Did you select the option of USB Debugging mode enabled when connecting to ADB??
If you didn't, then try connecting by enabling that.
As you said no other samsung devices are connecting, then you surely install driver softwares.
Here's the link to the Samsung USB Driver: http://forum.xda-developers.com/showthread.php?t=961956
If you have installed Samsung Kies, disable it first and then try to connect it in Odin or ADB!!
Press thanks if I have helped you.
Yes, i turned on USB debbuging (i rooted my tablet through ADB). I turned it back off when i tried to use mass storage, as well as double checked if the usb thetering was oof (it was)
Ive never installed kies because my pc is pretty crappy (not even 1gb ram)
Ill give that driver a try and let you know, thank you !
EDIT -------------
Those were the drivers !! I love you man !