[Q] Mouting issues (MTP) - Galaxy S III Q&A, Help & Troubleshooting

Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!

Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app

Thanks for your response.
Yes, USB Debugging is enabled.

Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.

Ok I just tried to make a factory reset, nothing changes...

Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.

Anyone ?

Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104

Work for me too! THX

Thanks for your help !
Unfortunately it didn't work for me.... :/

Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/

Up
I still have the same problem. No other ideas please ?

? :/

Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port

Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help

Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem

Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.

have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers

Related

[Q] USB Device Not Recognized

So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.

Galaxy S2 no longer detected by computer via USB

As per the title, device manager doesn't change when I plug the phone in, tried two different computers and two different cables, flashed the stock firmware back, and still nothing.
It charges when I plug it in and SOMETIMES brings up the MTP-Initialization logo thing, but never gets any further.
Is my GS2 goosed yet again?
Edit: Tried on my PS3 as well and still charges, but won't ask to mount the SD card or anything, so I'm back to my trusty HTC HD2, wondering whether I should sell the GS2 once it's repaired and get a Galaxy Nexus...
Hah, another HD2 veteran, it's like everyone from the HD2 forum is now here... even the devs. Anyway, may be a stupid question, but are you always trying with the same USB cable?
Disable usb debug mode
Sent from my GT-I9100 using xda premium
Tried two different cables as stated in my OP, and it doesn't matter whether USB Debugging is on or off. I'm taking it back to the service centre after work today, and I'm probably going to sell it after.
I've had the camera go.
I've had it not vibrating at all.
I've had problems with spots on the camera lens.
I think I'm going to put some money to the sale of it, and get a Galaxy Nexus, hopefully the built quality will be at least a little better...
Solution is in the phone
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 64 Bit
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 32 Bit
Thank you !!!
Unbelievable! Thank you soo Much!
Helps also on Mac 10.6.8
Thanks a lot mate..I was afraid that i'll have to take it to service center. This helped me.
thanks people!...even i had upgraded to 2.3.6 and usb mode just wouldnt work....
this solved that problem though..
Fantastic tip!
It worked! Now my S2 can be detected by the PC.
Thanks a million!
Doing a factory reset after backing up data will solve the problems.
Still Hasn't worked for me. I'm getting no USB function other than Charge. Its working as if the USB isn't plugged in at all.
Is there anyway of reinstalling the MTP application on the phone? When i find it through App manager its showing with no size and no options inside (clear data or clear cache)
Kies isn't working as far as the phone is concerned there is no USB connection at all.
I know ICS is coming within a few days for GS2 owners, will this clear the problem???
So frustrating.
Thanks in advance if anybody can help
SG2-Nick said:
Still Hasn't worked for me. I'm getting no USB function other than Charge. Its working as if the USB isn't plugged in at all.
Is there anyway of reinstalling the MTP application on the phone? When i find it through App manager its showing with no size and no options inside (clear data or clear cache)
Kies isn't working as far as the phone is concerned there is no USB connection at all.
I know ICS is coming within a few days for GS2 owners, will this clear the problem???
So frustrating.
Thanks in advance if anybody can help
Click to expand...
Click to collapse
same with mine. mine still doesnt work with the dialer *#7284# and with debugging off or on. ive unistalled and reinstalled the driver serveral times and nothing and this has happened to me on my hero and my sgs2 dozens of times, its so annoying =[. at one point i manged to get all but the usb storage drivers installed. what else can i do ???
Same problem
Same problem here, tried everything (to my knowledge). Someone told me it had to do with the battery overheating because I had use the charger from another phone. For about 2 days my phone would go on vibrate randomly and started the connection process (like a usb cable was connected). It could do that non stop for a few hours. Now that Im back to my original charger, it stoped, but still can't connect to my pc.
I tried on 3 diff PCs with diff version of windows...
I've tried everythin, debug mode on/off, reinstalled Kies, drivers, did factory reset, but nothing.. when i try to connect my SGSII to Kies, it writes "Current connection mode not supported by Kies".. I'm on Lite'ning rom v2.2..
If you're running a custom rom, why would you want to use Kies ? It's awful. There are so many other apps that have the same functionality as Kies (tho granted not one app that does everything Kies does) that work perfectly with custom roms.
Only reason to use Kies would be if you went back to stock because you wanted official ICS OTA or similar IMHO.
I did a backup with Kies, now my all contacts, sms, videos, music, calendar are in this f***in' backup file.. :| I have an awfull headache Or i can do a restore with another app, will it be compatible with Kies's backup file?
same problem. USB connection to PC will only charge. Recently updated to 2.3.6.
Tricky one.
----------EDIT---------
it worked ok after rebooting my PC. Must just be general crapiness.
Ashtwinks said:
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 64 Bit
Click to expand...
Click to collapse
Won't work on my samsung galaxy s2 (ICS 4.0.3) - windows Xp (sweet)

connection problem with odin and PC

I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Kies should install the drivers when you plug it in. But during flashing, you need to close kies.
It's not the issue. Drivers are work correctly because other phone is detected. Kies is close.
azdanowski said:
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Click to expand...
Click to collapse
The problem started with 2 & 5 .
You probably flashed a new stock firmware , which caused root functionality to disappear .
In number 4 , fix permissions should only be used if a few system apps keeps force closing
In number 6 , factory reset isn't needed unless absolutely necessary
I'd recommend you to go to www.sammobile.com and download the firmware that you were using
Then flash it with ODIN
Emo,
but my only one problem is, that ODIN dosen't detect my ACE. So this is my main issue: what should I do, to reinstitiute a possibillity of detecting phone by odin / PC.
azdanowski said:
Emo,
but my only one problem is, that ODIN dosen't detect my ACE. So this is my main issue: what should I do, to reinstitiute a possibillity of detecting phone by odin / PC.
Click to expand...
Click to collapse
It should detect your phone
Try ending all Kies processes by using Task Manager
Sent from my GT-S5830 using XDA App
azdanowski said:
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Click to expand...
Click to collapse
this is your problem. Uninstall your phone in Device Manager and install it properly by downloading the standalone USB driver for S5830. Google for it. This happened to me on Win XP. On Win 7, the native/vanilla USB drivers worked fine.

[Q] Vibrant soft bricked, can get to download mode, windows doesn't recognize device.

People!, I'm about to pull all my hair out on this one
Vibrant is soft bricked in a boot loop after a incomplete flash, I am able to get it into download mode but both my windows machines say USB device isnot recognized, and thus, I cant use ODIN to return to stock. When I try to manually point windows to the samsung drivers I get nothing…
So far I have tried drivers from:
-Bay_wolf's AIO Vibrant Toolbox 2.5
-USB drivers for vibrant from samsung support site
-Drivers from samsung keyes
Side notes that might help: I was perviously using a Hellybean Rom. My device displays "Galaxy S gt-9000" on boot... not sure when that came to be but maybe some rom changed some important recognition stuff??...
I found this thread http://forum.xda-developers.com/showthread.php?t=1008383 but no help...
Any help would be greatly appreciated!!
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Toast6977 said:
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Click to expand...
Click to collapse
Thanks a ton for reply but, sadly, no dice.
Tried connecting the phone, getting the "unrecognized device" prompt, finding "unknown device" in device manager, right clicking to uninstall. rebooting my machine, using various install methods to re-install drivers, re-connecting, and nothing.. same issue...
I lost the original cable a while back, but can't accept that NONE of the other 5 cables used are all broke... specially if the computer recognizes something going on... is it worth buying a new one?
Losing hope here, been like this for 4 days now, think it's time to go get a new phone. :crying:
Even so, it would have been nice to get what was a perfectly working phone back if only to keep it as a mp3 payer.
If anybody in New York, NY has a working odin set up that can do this for me, I have a 6 pack of your favorite beer with your name on it.
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
For what its worth, the gt i9000 screen appears after your on a custom GB boot loader and Odin back to stock (or probably Odin flashing any other ROM) you can change it by flashing the GB boot loader again. My phone says its a i9000 too, but I'm just about lazy enough to not bother changing it, lol.
So that's unrelated.
eksasol said:
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
Click to expand...
Click to collapse
Ok, faith momentarily restored. But I have questions:
-What do you mean when you say "check the option to also delete USB driver and uninstall any drivers"? I dont get such a prompt from right clicking on "unknown device" and selecting uninstall? Is there another method to uninstalling drivers?
-In the link attached, I can only find "Device(Install),USB Driver (Software) (ver.1.0)" not the 1.5.3 version mentioned. What am i doing wrong here? currently searching google for the 1.5.3 but finding nothing.
I get into download mode by holding volume- up + power. Have 2 PCs ( win xp and win 7) and a mac running mountain lion (but never ever have been able to get Heimdall to work, so devoting time to odin.)
Thank you for the time + help, guys, I really do appreciate it in the time of utter un-nerdness.
If the device is already installed it will have a check box that said "Delete the driver software for this device." If its unknown then obviously not. By "uninstall any driver", I mean uninstall any Android drivers you current have installed and reboot before you reinstall the new driver.
Although I doubt it will make a difference than the one I linked above, you can try the Samsung driver version 1.5.3: http://www.mediafire.com/?r0uc3h413qcy80z
If you did manage to get into download mode and see this: http://images.google.com/search?num=10&hl=en&site=&tbm=isch&source=hp&q=download+mode
Then it mean there is a very good chance you can restore the phone, if you can find a computer to recognize it and Odin to see a COM port.
I definitely think it would be worth the money to go buy an OEM USB cord. I can't tell you how many times I have seen this and a new USB is the fix.
sent from the depths of helly bean
OK guys...
My friend, who also owns a Vibrant, let me borrow the cable that came with the phone for the last 2 days.
Tried to make ODIN work on both PCs at home, gave Heimdall a shot on my mac, even hijacked a computer at work for the better part of the morning and freshly installed USB drivers 1.5.3 before connecting. All for nothing... “Unknown device” across the board....
At first I felt that with being able to get into download and have SOME kind of a reaction from connecting to PC had to be a good sign. Almost completely convinced that there is some unknown, unworkable hardware problem present. Definitely, officially, unremarkably out of ideas here.
Nothing is beautiful and everything hurts.
Last thoughts? Options at this point?
Also, tried One-click Unbrick tool on mac. I got a "is your phone plugged in, is it on download mode?" error, but anyone reading this down the line with a similar problem should check it out.
http://forum.xda-developers.com/showthread.php?p=15330252

[Q] Problem with USB connecting

Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Answer
Lucho505 said:
Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Click to expand...
Click to collapse
Did you select the option of USB Debugging mode enabled when connecting to ADB??
If you didn't, then try connecting by enabling that.
As you said no other samsung devices are connecting, then you surely install driver softwares.
Here's the link to the Samsung USB Driver: http://forum.xda-developers.com/showthread.php?t=961956
If you have installed Samsung Kies, disable it first and then try to connect it in Odin or ADB!!
Press thanks if I have helped you.
Yes, i turned on USB debbuging (i rooted my tablet through ADB). I turned it back off when i tried to use mass storage, as well as double checked if the usb thetering was oof (it was)
Ive never installed kies because my pc is pretty crappy (not even 1gb ram)
Ill give that driver a try and let you know, thank you !
EDIT -------------
Those were the drivers !! I love you man !

Categories

Resources