[Q] Xperia Mini Pro DEAD - Help me load new SW - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Hi,
i have problem with SE Xperia Mini Pro (SK17). All of a sudden, screen went black when I was using it. Ever since, I cannot even start the phone. I tried to turn it off, but it doesnt work. I also put the battery out of it, waited for a little while and then put it back - but it still doesnt work. When i try to turn it on, only black screen is what I see.
I tried some repair shop and they told that it is problem with Software and that it needs to be reloaded, I mean that SW has to be replaced with the new one.
Can anybody please help me do that?
Thanks a lot guys

zanex60 said:
Hi,
i have problem with SE Xperia Mini Pro (SK17). All of a sudden, screen went black when I was using it. Ever since, I cannot even start the phone. I tried to turn it off, but it doesnt work. I also put the battery out of it, waited for a little while and then put it back - but it still doesnt work. When i try to turn it on, only black screen is what I see.
I tried some repair shop and they told that it is problem with Software and that it needs to be reloaded, I mean that SW has to be replaced with the new one.
Can anybody please help me do that?
Thanks a lot guys
Click to expand...
Click to collapse
Did it brick while a software update or really just while using it? It's not battery related?
Is your bootloader locked and are you using a custom kernel or rom?
You will have to flash the original firmware again using flashtool. For that download flashtool from the development section and install it. Go to the installation folder > drivers and install all drivers for all devices.
Afterwards download the 4.0.2.A.0.42 .ftf for SK17i from here and place it in the flashtool folder > firmware. Delete all other files in firmware folder.
Open flashtool, click on the flash and select flashmode -> ok. Select the 4.0.2.A.0.42.ftf and click okay. Let your phone turned off and hold volume down and while you hold volume down just connect usb to pc. Don't power phone on, just connect to pc while holding volume down. Flashtool will automaticly flash the firmware. I hope your battery status is more than 25%
Don't disconnect your phone while it's flashing. Afterwards plug phone off and reboot, it should be alive again

Thank you, I will try it.
No, it is not battery related, I checked battery. And it didnt happen during SW upadte, it happend during regular usage. Al of a sudden...
Thanks again for your reply, I will try it as soon as I can. I hope I will be able to do it despite the fact, I have no experiences in such things... (I use iOS, this Android phone belongs to my girlfriend)

zanex60 said:
Thank you, I will try it.
No, it is not battery related, I checked battery. And it didnt happen during SW upadte, it happend during regular usage. Al of a sudden...
Thanks again for your reply, I will try it as soon as I can. I hope I will be able to do it despite the fact, I have no experiences in such things... (I use iOS, this Android phone belongs to my girlfriend)
Click to expand...
Click to collapse
If you have any questions or need screenshots, just tell me I will post them for you

So I did everything as you wrote, but it didnt help Phone was flashed correctly I guess, there were no errors in report. Should I try some different mode or something else? Anything?
Or does it mean, that it is not software failure?
Thanks anyway

Did it vibrate, When you power on the phone?Can you see the boot logo?try to repair it through sony pcc.if the problem still exist then its hardware related. You have to replace the display.....
Sent from my ST15i using xda premium

I think it is your display or ribbon problem.All the sliding phones have this ribbon problem.

Yes, it did vibrate. Im not sure it is display problem, because the display shines, but only black color - it is not as black as if it is turned off.
And no, I can not see boot logo. Only vibration and shining black color

zanex60 said:
Yes, i did vibrate. Im not sure it is display problem, because the display shines, but only black color - it is not as black as if it is turned off.
And no, I can not see boot logo. Only vibration and shining black color
Click to expand...
Click to collapse
try to repair it through Sony PC Companion. if it doesn't work then your display is dead

Beforing that flashing, PC Companion wasnt able to recognize phone - now it does. It immediately recognized, that there s xperia mini pro plugged-in.
So does it mean, that SW is fine and the display is messed up? Now i m trying to repair through pc companion, i ll see if it helps.
Thanks guys anyway for all the help

zanex60 said:
Beforing that flashing, PC Companion wasnt able to recognize phone - now it does. It immediately recognized, that there s xperia mini pro plugged-in.
So does it mean, that SW is fine and the display is messed up? Now i m trying to repair through pc companion, i ll see if it helps.
Thanks guys anyway for all the help
Click to expand...
Click to collapse
Looks like display's got a problem. So try to repair via pc companion (guess bootloader is locked if pcc recognizes your phone) and if that doesn't help bring it to service

PC Companion didnt help. It has just loaded the latest software to the phone, but it is still same - i try to turn it on, it vibrates and then black screen is shining.
So I guess you guys might be right - display might be dead.

What does it mean that bootloader is locked? The phone was recognized, I also updated the SW via PC Companion

zanex60 said:
What does it mean that bootloader is locked? The phone was recognized, I also updated the SW via PC Companion
Click to expand...
Click to collapse
Yes it means your bootloader is unlocked and display is dead
Sent from my ST15i using xda premium

well... display + ear loudspeaker (or flex cable can it be, i m not sure)...
i m not sure if it s worth repairing (I bought it second hand, i dont have warranty certificate)

You mean warranty for phone? Ask at service center how much it is to repair without warranty certificate...
And: No if pcc recognizes phone the bootloader is locked!
Sent from my SK17i running Jelly Bean via CM10

Try this:
Download UnbrickingXperia2011.zip file from here: http://www.mediafire.com/?s166qsg8qaaxc43
Unpack the .zip file and place the .ftf file in Flashtool\firmwares folder.
Open Flashtool.
Get your phone to flashmode, make sure it is turned off, press down Volume DOWN button and connect USB cable.
In Flashtool, click the lightning button, pick Flashmode and choose the Xperia_2011_FreeXperia_ALL.ftf file.
Let Flashtool finish.
Now do what mihahn said.
I hope it helps, if not then it is a display problem

Eventually, there was nothing left to try, so I went so mobile repair service a had it diagnosed.
The only problem was flex cable. They also told me that it is quite common problem for slide phones. Fortunately, display was OK.

Related

x10i wont start up

Hey guys,
I have an x10i that just went dead one day, I thought it needed a software re-install so I did it. Now it wont turn on and I just get a quick green blink and a vibrate when I turn it on. Ive flashed it 10 times via sony update too and pc companion and flash tools. I dont know what to do, any help would me much appreciated.
Download SEUS from Sony and flash. Make sure it is fully charged and make sure you are using the right USB cable and try using several different USB ports on your computer if the first one doesn't work.
beau420 said:
Download SEUS from Sony and flash. Make sure it is fully charged and make sure you are using the right USB cable and try using several different USB ports on your computer if the first one doesn't work.
Click to expand...
Click to collapse
Thanks for the response, I have a fully charged battery and just re-flashed with still no luck. What did you mean about the "right usb cord" ?
Thanks again.
I mean reflashed with SEUS (not PC Companion) and by right USB cord, I mean the one that came with the phone. Or if you have the possibility, try another one.
Tried with 2 different usb cords and on 2 different cpus. I think Im S.O.L
One more question, after a flash how long does it take for the xperia to boot up?
During a flash with SEUS it tells you when the phone is rebooting....same with the Flashtool.
Screen turns on...still black...then Sony logo, then your bootlogo followed by desktop.
http://www.youtube.com/watch?v=HmX-IYNYqL8
Is it successfully flashing using SEUS or flashtool? Does it actually flash and then not boot? What does it say when you flahs using the flashtool?
But again, if the flashtool isn't working, you are going to have to use SEUS to get back to scratch. Run it as Admin...let it boot up and do nothing to the phone for at least 2 minutes. Do not swipe or move a thing....let it settle down.
Some of you people who ask for help really don't provide much information at all.
To me it looks like a wrong firmware problem... version you have installed isn't the same as kernel.
I would flashtool....root....turn off phone....SEUS full reflash....
beau420 said:
During a flash with SEUS it tells you when the phone is rebooting....same with the Flashtool.
Screen turns on...still black...then Sony logo, then your bootlogo followed by desktop.
http://www.youtube.com/watch?v=HmX-IYNYqL8
Is it successfully flashing using SEUS or flashtool? Does it actually flash and then not boot? What does it say when you flahs using the flashtool?
But again, if the flashtool isn't working, you are going to have to use SEUS to get back to scratch. Run it as Admin...let it boot up and do nothing to the phone for at least 2 minutes. Do not swipe or move a thing....let it settle down.
Some of you people who ask for help really don't provide much information at all.
To me it looks like a wrong firmware problem... version you have installed isn't the same as kernel.
I would flashtool....root....turn off phone....SEUS full reflash....
Click to expand...
Click to collapse
When the flash finishes up it says to turn on the device and the start up may take some time, Ive let it sit for hours and still nothing. IDK what the hell is wrong with it.
K well I give up. Ive tried 3 more times using a cpu with xp and still the same thing.
If any one else has had this problem please let me know.
looks like the faulty motherboard issue to me, some users are experiencing this problem, if you have warranty get a new phone if don't then i don't know what else can you do :/
Great. I have no warenty so looks like I'm screwed.
Sent from my HD2 using XDA App
Is there any way to fix the mother board issue ?
Dont mean to beat a dead horse but....... HELP!!!!

[Q] X10i can't do flashing and repair from PCC & SEUS...

my x10i v2.3.3 batt was running low at 8%... so i turn it off from my work place... when i reach home and turn my phone on, my phone only vibrate abit and nothing was happen... so i tot my phone battery is flat so i when to charge it... but when i charge the phone nothing happens too.. i try take out the batt and put it back afew times but still not working... so i tot is my software facing problem and i use PCC and SEUS to repair... but it say can't install update try again.. i do it around 3 to 4 times... but still the same.. now my phone when i press on it blink green led once and nothing happen... but when i plug in my charger, the led turn green but in black screen... so can any1 help me fix tis.. thanks...
Hey, 'm facing the same issue
Recently i upgraded my Xperia to "ThGo2 v16.0" from custom rom..
After some time the rom got unstable and restarted the phone, however it wouldn't boot up. Now i have completely black screen, all the time, with few red blinks
(I have tried all the solutions here:
1. SEUS : Says ur phone is already update and show Xperia arc in backgroud. No update available
2. PC companion: Tried all the tricks to start w/o connecting n all still the phone is not detected.
3. Flashtool, tried flashing it with 0.6.8 and 0.2.9.1
4. I have also used other tools like superclick, root / unroot and S1 tool (no of them worked)
Now, nothing is working with few red blinks and gree light..
Please help, my phone is converted into a black paper weight now....
Use pc companion. Or flashtool
Sent from my X10 using xda premium
Nopes
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
surajpardeshi said:
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
Click to expand...
Click to collapse
U from India? Know hindi?
Sent from my X10 using xda premium
Me too BRICKED or Semi Bricked.... =(
First fail PCC
Then PCC Repair fail too
SEUS fail.
Took to different computer that was finally able to flash 2.1.1 update last year.
Clean install of pcc and seus Both still fail
In fact pic with yellow is from that fail & all others (Using Flashtool) except X10a_2.2.1.A.0.6_Rogers.ftf I get regular triangle with ! over top of phone pic after SE I've exhausted ALL my efforts and need guidance. I am super broke right now, so repair shop not good option. Two shops here in town say they will try, but NO PROMISES and still must pay for time
NEED True rescue fix here
Hindi yes
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
surajpardeshi said:
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
Click to expand...
Click to collapse
Right now i am bit busy. I will upload a pic for u as soon as i get free.
Sent from my X10 using xda premium
Using pcc... Even on "no phone connected"
Help us!!!
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
enzo1984316 said:
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
Click to expand...
Click to collapse
Did you try to read the above post at all?
Sent from my X10 using xda premium
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
enzo1984316 said:
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
Click to expand...
Click to collapse
Charge your battery using another x10 or any external charger
Sent from my X10 using xda premium
FIX!
I had the same issue when I was experimenting with ROMs and Recoverys, but not to worry, Sony PC Companion 2.1 does the trick!
Download PC Companion 2.1 from the Sony Mobile website
1. When you download and open it, click start under Support Zone
2. Click start under Phone Software Update
3. When the window saying that a phone could not be found appears, click repair phone
4. A windows like this will appear, click continue to proceed with the repair of the firmware
NOTE: All data that is placed on the phone memory will be wiped but any data saved on the memory card will be spared
5. After clicking continue, a window like so will appear. Tick the box and click next to continue with repair!
6. Sony PC Companion 2.1 will now prepare the computer for the firmware update
7. Now choose your phone model, in this case it should be the Xperia X10 (X10). Select the phone and click Next!
8. Follow the prompts to repair your phone!
GOOD LUCK!!
Always fails for me.
All process end in fail
There must be a file I need to rename or something....
tried everything now...
I have tried everything by now, here i have attached a attachment of error i get while repairing my phone through SEUS..
only option is box flash, but i think its kind of risky...
Fail fail fail..... i'm getting hopeless wif my X10
Hey,
I did some re-search and got to know that somehow my X10 flashes as So-01C in some systems, i.e. xperia arc, even while updating ..........
Anyone here, knows other ways to flash through box other than technician, coz these technicians are real idiot they can crap your phone in 10 seconds, so its better to crap it yourself...
"alternative to box flash, please ???"
Try this
Had the same problem once, when my phone would not start at all, all I had to do was connect it to the PC Companion (2.0), at first it wouldn't repair but after a certain amount of tries it did the trick,
First: Make sure all your drivers are installed, if they were installed there should be no problem.
If they were not, the computer cannot identify your phone, try installing some other x10's drivers (cause your's is bricked I assume) that might do the trick aswell.
Open PC Companion > Support Zone > Phone Software Update (Start) > Follow Instructions > Repair
It might take several tries to get it right
If this doesn't work try the latest flashtool, it should do the trick !!
There must be something you are not doing right, else SEUS/Flashtool should have worked like a charm.
see i get this reply, when updating x10..
I have tried this like thousands of times, installing roms and then removing them and repairing the phone, but this time it has gone over my head........

[Q] X10 Mini Firmware

I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)

Bricked Ray LED doesn't even light up

5 months ago I bought my Xperia Ray, unlocked the bootloader, rooted it, flashed aire's kernel and rom and everything was good until yesterday. A friend was using it, he was playing fieldrunners and all of a sudden it sort of froze with only the white LED on and the screen off. I tried holding the power button to shut it off with no avail. I then took the battery out then back in to restart it and no response at all. Tried connecting the charger but the LED would not turn on and since then, my ray has been like that. I don't know what to do, flashtool, update service or pc companion can't recognize the phone, but when I plug it in, it appears on the device driver manager as ZEUS flash drive (which I think is normal), but it is just not recognized and the LED doesn't even turn on when charging or connected to the pc. I want to know if it's fixable or not
Any help would be very appreciated! Thanks in advance.
Try full charge ur phone? Maybe is just battry drop or flash it using seus? Fastboot mode working?
Sent from my ST18i using xda premium
The thing is I don't know if it's really charging, no LED when I connect it. I already left it charging for a whole day and still nothing... I will try to charge the battery using a different phone. And no fastboot or fastmode at all, no LED to know if it's on either.
Did you overclocked it?if yes you could have burn the cpu
Inviato da me!
Unfortunately I did, to the typical 1.4, I wasn't sure if it was that, because it wasn't even warm when it happened, but that was the one answer I did not want to hear u.u. Is there anything that can be done?
Gusion00 said:
Unfortunately I did, to the typical 1.4, I wasn't sure if it was that, because it wasn't even warm when it happened, but that was the one answer I did not want to hear u.u. Is there anything that can be done?
Click to expand...
Click to collapse
Wait,i'm not totally sure of that,but is possible,however if none of the other method worked i think the last resource is sony service,if you are lucky is possible they give you a new phone without investigate about bootloader,kernel etc...many people have reported that,good luck,and happy new phone!:beer:
Inviato da me!
Well... I unlocked the bootloader the official way :s I don't know if they check the iem before receiving it.
Gusion00 said:
5 months ago I bought my Xperia Ray, unlocked the bootloader, rooted it, flashed aire's kernel and rom and everything was good until yesterday. A friend was using it, he was playing fieldrunners and all of a sudden it sort of froze with only the white LED on and the screen off. I tried holding the power button to shut it off with no avail. I then took the battery out then back in to restart it and no response at all. Tried connecting the charger but the LED would not turn on and since then, my ray has been like that. I don't know what to do, flashtool, update service or pc companion can't recognize the phone, but when I plug it in, it appears on the device driver manager as ZEUS flash drive (which I think is normal), but it is just not recognized and the LED doesn't even turn on when charging or connected to the pc. I want to know if it's fixable or not
Any help would be very appreciated! Thanks in advance.
Click to expand...
Click to collapse
Maybe a OTA Update ?! - When you try to turn it on does the LED flash When yes, try to use Flashtool to unbrick it.
(Unlock BL or something in Flashtool)
I'm sure you burned your CPU. The Same Happens to my Friend - Just a LED Notification and BlackScreen 4ever LOL
....never exagerate with overclock....
Inviato da me!
Yeah, I'm sure it's burned, but no LED at all! Too bad I can't even replace it through the company since I unlocked the bootloader the official way ... Oh and I didn't exaggerate with the OC, it was the regular 1.4 which I assume most rooted ray users use it at... or am I wrong? :s
Do it step by step;
-First uninstall all sony pc companion components.All sony drivers.
-Then download SEUS from this link.http://db.tt/jpD87GkM
-Install and run.After updating the program close.
-Then download pda.net drivers from here:http://junefabrics.com/android/download.php and install.
-Download and install latest flashtool from the topic.
-After all of these you must relock ray because you need to SEUS to unbrick your phone and it requres locked bootloader.
-Download this ftf file and flash this file via flash tool.http://www.mediafire.com/?g1b5j712ajx4yjd .(Your device must be seen after installing pda.net drivers in green flash mode)So your phone is have locked bootloader.
-So every think is ready.Open SEUS than select your ray that is it.For this step:http://forum.xda-developers.com/showthread.php?t=1492805
-You can unlock your phone again if you want than
Thanks, but still flashtool and SEUS do not recognize the phone. With no LED to tell me if it's either on flashboot or flashmode no flashing can be done. Chances are the cpu really is busted

[Q] WT19i Bricked - please help!

Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
emm
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
I do not know how it was bricked, but he said that, the power on button does not work, after phone died, before it his PC doen not recognise phone, my on my PC phone is known as as mentioned before - I do not have drivers for this strange named device
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Have you tried installing the drivers from flashtool folder and connect it in flashmode?
I think it's hardbricked, too, and you have to take it to sony
prime_225 said:
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Click to expand...
Click to collapse
I do not know how he did this ) I've installed proper drivers for WT19i on FlashTool - no way to flash anything.
Expert JTAG? it is some kind of service box or it is special thing that only Sony service have got?
wiewiorcwaniak said:
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
Click to expand...
Click to collapse
Have you tried to connect the phone to pc while holding the volume up button.........a blue led must glow up
If the phone connects .......that means you can flash a kernel by fastboot method
http://forum.xda-developers.com/showthread.php?t=1322827
JTag cable is now only solution for your mobile.
To look for jtag cable Google it and look for a dealer in your region and call, them they will give you right solution.
Don't worry bro your phone will revive with it as I have revived my phone twice
Sent from my LiveWithWalkman using xda app-developers app
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
you are a expert it work
Strange, It is the 1st time to see a bricked xperia 2011 phone!!
Sent from my Xperia Mini using xda app-developers app

Categories

Resources