ButteredToast (Butter smooth and extremely wicked)
CDMA/GSM Ice Cream Sandwich, sense 3.6, 4.x, AOSP
Be Gentle folks: This is my first kernel rodeo after many months of studying how the great ones do it.I hope you like it, if you dont then there's the door (figuratively).
Toolchain/Compiler: linaro 4.7.3
REPO -> https://bitbucket.org/bigwillyg/buttered_toast_shooter
KERNEL SENSE -> ButteredToast Final Version
Sweet kernel -O3 optimized for linaro 4.7.3 compiler (dont ask how, my head still hurts)
Changelog: Changelog is in post #2
Credits: Starting with CG/KeRnElChEf because he is my mentor/tutor/handholder and aside from the enormous obvious contribution, his constant assistance and teaching through out this experience. With out his help I never would have attempted this.
- Johhnyslt
- Faux123 (this equation: (4*HZ+61), the dynamic enhancement of f/sync)
- showp1894 (cmdline options, original cypress version sweep2wake - used as base by CG to write it for AMTEL)
- kernel.org
- CAF
- F2FS article from https://lwn.net/Articles/518718/
- MikeC84
- Ziggy471 (lagfree / smartass)
- Dodava
- Linaro
- creator of BFQ - i have no idea
- creator of SIO - i have no idea
- creator of VR - i have no idea
- developer of LZO
- yank555-lu (first with fast charge, adjust LED timeout via sysfs)
- chad0989 (improved on fast charge)
- Cjoliver
- Anryl
- Agrabren (initial CM10 cam fix)
- Eli Billauer (frandom)
If it works well for you GREAT!!! If not Please let me know, logcats for errors are preferred.
CHANGELOG
Code:
- RLS18-FINAL:
PATCH: Patch to Linux 3.0.101
FS: Added ExFat SDCard support
- RLS17.9:
PATCH: Patch to Linux 3.0.96
- RLS17.7:
PATCH: Patch to Linux 3.0.84
CPU: updated interactive governor from CAF msm-3.4, thanks mrg666 for the tip.
SCHED: updated ROW scheduler from CAF msm-3.4, thanks mrg666 for the tip.
- RLS17.6:
PATCH: Patch to Linux 3.0.80
CPU: updated interactive governor (thanks mrg666 for the tip)
WIFI: updated wifi for improved stability (thanks mrg666 for the tip)
- RLS17.5:
PATCH: Patch to Linux 3.0.77
SCHED: tweaked ROW per johhnyslt's repo to try and get to work better.
- RLS17.4:
PATCH: Patch to linux 3.0.74
PATCH: Patch to HTC 2.95 Source
- RLS17.3:
PATCH: Patch to linux 3.0.72
SCHED: added ROW IO Scheduler
MPDEC: sysfs support for max screen off cpu clock added (Chad Goodman all the way, love this guy)
FIX: file ext4 compile errors (Chad Goodman)
- RLS17.2:
SCHED: was missing a setting to enable power manager.
READAHEAD: was missing a ';', fixed.
- RLS17.1:
PATCH: Patch to linux 3.0.71
Dynamic Readahead from Chad Goodman
AROMA: added 1.6 and 1.7Ghz as selections in aroma.
- RLS17:
RNG: added frandom support, you will need to install crossbreeder or similar to use.
CPU: linaro power patch. Even though its openly available, I got it from Chad Goodman.
CPU: corrected the CPU table and documented each line for clarity (Thank you chad for info)
- RLS16.5:
PATCH: Patch to Linux 3.0.70
- RLS16.4:
PATCH: Patch to Linux 3.0.69
BT: shooter_u bluetooth fix from johhnyslt
- RLS16.3:
PATCH: Patch to Linux 3.0.68
- RLS16.2:
PATCH: Patch to Linux 3.0.67
- RLS16.1:
PATCH: Patch to Linux 3.0.65
- RLS16:
USB: OTG works again
CPU: xondemand works again
PATCH: patch to LInux 3.0.63
- RLS15.3: (Broken, dont use)
XZ: enabled and working (thanks thicklizard)
- RLS15.2:
PATCH: patch to linux 3.0.62
XZ: added xz compression to kernel.
- RLS15.1:
BLUETOOTH: reverted bluetooth wakelock patch since issues started after applying it.
- RLS15:
CPU: added xondemand cpu governor (thanks to chad for providing the missing piece(s) and Anryl for sharing his source as an example)
- RLS14.5:
PATCH: Patch to Linux 3.0.61
- RLS14.4:
PATCH: Patch to Linux 3.0.58
- RLS14.3:
PATCH: Patch to Linux 3.0.57
had to revert the patch for the 3D clock. doesnt need it
- RLS14.2:
FREQ: raised default frequency from 1188 to 1350, can still be changed in aroma
DEVICE: patch from Chad Goodman to help prevent (gfx2d1_clk status stuck at 'off') errors
- RLS14.1:
PANEL: changed brightness back to 3 since 1 didnt work.
PATCH: patch to linux 3.0.56
- RLS14: Birthday Edition
PATCH: patch to linux 3.0.54
PANEL: lowered minimum brightness to 1 to see if it works.
BT: bluetooth wakelock fix from agrebren, courtesy of Dastin1015
AROMA: added back camera drivers option in installer
- RLS13.6:
PATCH: patch to linux 3.0.53
- RLS13.5:
PANEL: added more missing changes to shooteru side for brightness.
- RLS13.3:
PANEL: forgot to add this change to shooteru. no change for cdma.
- RLS13.2:
PATCH: Patch to linux 3.0.52
PANEL: adjusted brightness calculation to better sense lowest brightness (thanks to Anryl for help)
- RLS13.1:
PATCH: patch to linux 3.0.51
AROMA: updated the aroma config to remove the sense vs aosp option and other changes borrowed from CG.
- RLS13:
SWEEP2WAKE: updates to the driver to allow config via aroma
- RLS12.1:
Patch to Linux 3.0.50
- RLS12:
PATCH: patch to linux 3.0.49
TOUCHSCREEN-ATMEL: cm multitouch fix (seems to not affect sense) (Agrebren)
- RLS11.1:
FRAMEBUFFER: refreshrate override - may help with some sense 4.x lag
- RLS11:
VM: lower SYSCTRL latency values to help reduce lag (shooter_u)
VM: lower latency values to help reduce lag
VM: increase default MAX read-ahead
OOM: dont kill kernel threads
DEFCONFIG: update defconfig files for stability
MENUCONFIG: add 'targeted preemption latency for CPU-bound tasks' to menu config
FIX: fix typo, we actally want this to compile
- RLS10:
VM: Add Common VM Settings to MENU CONFIG (thanks Chad)
- RLS09:
Patched to Linux 3.0.48
- RLS08:
Patched to Linux 3.0.47
- RLS07: (Thanks CG for the making this possible, no kanging please, give credit)
CAMERA: allow for CM10/AOSP compatibility alongside sense 3.6/4.0
SYSFS: add misc sysfs interface for rom type (aosp/sense for example)
DEFCONFIG: gsm and cdma need same name for COMMON modules to work
DEFCONFIG: update defconfig for linaro topology drivers
CPU: linaro arm topology drivers
- RLS06:
BLUETOOTH: made it work with sense and aosp roms (CG, thanks for the fix)
- RLS05:
CM10 camera fix (agrabren/anryl)
CPU: rename cpu info
BOARD: name device
CPU: make use of faster L2 (and FSB) clocks
L2: add 1458, 1512, 1566 L2 Clocks, and set 1404 and over to 360MHz FSB
FSB: define 360MHz FSB
GPU: set GPU clock defaults to max, so aroma has full control
GPU: dont OC by default, allow SYSFS contol over max clock
- RLS04:
GENERAL: fixed shooteru directory names in zip
CAM: applied camera fix in separate build for CM10/AOSP
- RLS03:
DEFCONFIG: had to manually patch shooter_defconfig, last commit didnt complete
DEFCONFIG: upload autogen defconfig files for CDMA and GSM
PATCH: patch to linux 3.0.46
SCHED: prepare for ROW IO scheduler
SCHED: add BFQ IO scheduler
FLASH: reduce battery level requirements for FLASH
WIFI: undervolt wifi card to whitepaper spec
BOARD: add thermald support to device specific files board files
ARM: use generic strnlen_user and strncpy_from _user
CRYPTO: add support for AES128+SHA1 encryption/decryption
NET: add JIT compiler for packet filters
SCHEDULER: set LOAD_FREQ to (4*HZ+61)
SCHEDULER: disable GENTLE_FAIR_SLEEPERS
CPU: kernel based thermal management
CPU: kernel based MPDECISION
CPU: raise PERFLOCK clocks to 1.5Ghz
ZCACHE: update ZCACHE drivers
ZRAM: update ZRAM drivers
COMPRESSION: add support for Google snappy decompression/compression
IO SCHED: add simpleio IO scheduler
IO SCHED: add VR IO scheduler
CPU: add smartass v2 cpu governor
GSM support
- RLS02: PATCH: patch to linux 3.0.45 (kernel.org)
- RLS01: PATCH: patch to linux 3.0.44 (kernel.org)
FILESYSTEM: added F2FS
PATCH: ck-1 patchset
ATMEL: SWEEP2WAKE: enhance driver, add ABOUT to sysfs
F/SYNC: make f/sync dynamic -vs- straight on/off via sysfs
THERMAL: reset some variables to pull maxclock setting from aroma vs kernel default
IO: add BFQ i/o scheduler
IO: add SIO i/o scheduler
IO: add VR i/o scheduler
BCM4329_248: undervolt wifi chipset to whitepaper spec
CPU: add ZIGGY471s custom LAGFREE governor
enable cmdline options
LED: dynamic LED brighness mod
CPU: update cpu core clock control
HEADSET: limit all notifications to single-thread
AROMA: add kernel side support for aroma installer
THERMAL: adjust sensor ID for CDMA
LINARO: MM: linaro specific tweaks/updates
CPU: clean and name tables, allow OC to 1.7GHz
MPDECISION: kernel based mpdecision
PANEL: lower min-brighness from 30 down to 2
INPUT: sweep-2-wake for amtel (shooter/shooter_u)
CDMA BOARD: adjust min/max voltage for cpu, ram, and l2 cache
LZO: update to latest version of LZO driver
CPU Vdd: adjust min/max voltage for cpu, ram, and l2 cache
CPU: allow SYSFS (userspace) control over cpu voltage
SCHEDULER: disable GENTLE_FAIR_SLEEPERS
SCHEDULER: set load_freq to 4.61
BCM4329_248: allow weaker signals to be seen
BCM4329_248: add sysfs control over pm=fast vs pm=max
GPU: allow sysfs (userspace) control over MAX GPU CLOCK (not current clock), and set default max clock
BATTERY: allow sysfs control over usb charge mode (fastcharge)
LED: allow sysfs/userspace control over led notification timeout
GPU-2D: help prevent gfx2d0_clk (or gfx2d1_clk) status stuck at 'off'
GPU-2D MHL: add GPU clocks 266, 228 to the STOCK 200MHz and idle at 200MHz clocks
GPU-2D: add GPU clocks 266, 228 to the STOCK 200MHz and idle at 200MHz clocks
GPU-3D: set GPU clock to 320, 300, 266, 228MHz and idle at 200MHz
CPU: Allow CPU-based alignment handling
USB: add support for usb host mode / otg
VFP: compile vfp for neon
Major updates
10-13-2012 RLS03 adds support for GSM
10-14-2012 RLS04 adds for camera in CM10/AOSP (separate zip for now)
10-17-2012 RLS06 bluetooth works with sense and aosp roms (CG, thanks for the fix)
10-20-2012 RLS07 no separate builds, camera works with both sense and aosp/cm10 (CG, thanks for kernel/aroma help)
DO NOT KANG THIS FIX!!! IF YOU USE IT CREDIT CG, HE MADE IT WORK LIKE THIS
10-29-2012 RLS12 TOUCHSCREEN-ATMEL: cm multitouch fix (seems to not affect sense) (Agrebren)
11-02-2012 RLS13 SWEEP2WAKE: updates to the driver to allow config via aroma
11-05-2012 RLS13.1 AROMA: updated the aroma config to remove the sense vs aosp option and other changes borrowed from CG.
12-03-2012 RLS14 AROMA: added back camera drivers option in installer
BT: wakelock fix from agrabren, courtesy of Dastin1015.
01-25-2013 RLS15 CPU: added xondemand governor (Thanks chad for providing the missing piece(s) and Anryl for sharing his source as an example)
02-03-2013 RLS15.1 BT: reverted agrabren bluetooth wakelock fix from RLS14.
02-13-2013 RLS 16 USB: OTG works
CPU: xondemand works again
04-08-2013 RLS17.3: SCHED: added ROW
MPDEC: sysfs for max screen off cpu clock (Chad Goodman)
Here are the settings that I personally pick in aroma:
Governor: ondemand
Min cpu: 384
Max cpu: 1512
Max scr off: 540
S2w: enabled with back light
S2w start: home
S2w end: search
Scheduler: deadline
12/03/2012: With RLS14 and newer, the option for selecting sense vs aosp camera is back. This option is for older base aosp/cm10 roms that still use the aosp camers drivers.
If I missed any settings let me know. Most of these are the defaults, but they are all what I personally choose.
Thanks. Great to see new kernel dev in GSM Will give it try
Sent from my HTC Evo 3D
szubert51 said:
Thanks. Great to see new kernel dev in GSM Will give it try
Sent from my HTC Evo 3D
Click to expand...
Click to collapse
Thank you. Hopefully it works great for you guys. I really want feedback from everyone that tries this.
bigwillyg said:
Thank you. Hopefully it works great for you guys. I really want feedback from everyone that tries this.
Click to expand...
Click to collapse
I have installed it and it seems to be just like the anthrax kernel,even it writes anthrax in the aroma installer...is it weird or what ?
Sent from my HTC EVO 3D X515m using xda app-developers app
dulexetina said:
I have installed it and it seems to be just like the anthrax kernel,even it writes anthrax in the aroma installer...is it weird or what ?
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
Well, that's more like my bad I got the aroma installer from him and forgot to change that :banghead:
Next update will fix it.
Sent from my PG86100 using Tapatalk 2
bigwillyg said:
Well, that's more like my bad I got the aroma installer from him and forgot to change that :banghead:
Next update will fix it.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Please do change it,cause it says also "anthrax" in setings and kernel tuner ... I think they could lock ur thread because of that
Othervise,it works pretty nice this few minutes,played ski safari and it does not lags,also played asphalt 7 (just one race) and it goes ok...Camera works,3D plus2D (writing this because i had issues with some test kernel from anthrax with 3D pics)....let's wait and see how is the battery. All recomended setings thru aroma installer,i did not changed anything-by the way
Sent from my HTC EVO 3D X515m using xda app-developers app
dulexetina said:
Please do change it,cause it says also "anthrax" in setings and kernel tuner ... I think they could lock ur thread because of that
Othervise,it works pretty nice this few minutes,played ski safari and it does not lags,also played asphalt 7 (just one race) and it goes ok...Camera works,3D plus2D (writing this because i had issues with some test kernel from anthrax with 3D pics)....let's wait and see how is the battery. All recomended setings thru aroma installer,i did not changed anything-by the way
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
Thanks for the heads up.
Sent from my PG86100 using Tapatalk 2
Breaks wifi on viper3d, first time it has happened to my phone
( Don't ask me for help, as I couldn't care if your phone explodes, eh!!!)
flashallthetime said:
Breaks wifi on viper3d, first time it has happened to my phone
( Don't ask me for help, as I couldn't care if your phone explodes, eh!!!)
Click to expand...
Click to collapse
Can you get me a logcat so I can see what's going on?
Award thanks, just because we have a new kernel developer.
Thanks for your hard work studying all that
-----------------------------------------------------
Sent from my HTC Evo 3D running ROMEOS 1.3.4 FINAL
Currently migrating to ANRYL ICS build 23 Sept with Coolexe 3.6 kernel
-----------------------------------------------------
looks like i understand the wifi problem, i have it too
in fact your zip can't write boot.img even on s-off phones
log provided
Can i flash this on s-on ??
And does this have ZSL ?!?!?!
invince2 said:
Can i flash this on s-on ??
And does this have ZSL ?!?!?!
Click to expand...
Click to collapse
No and no
flashallthetime said:
Breaks wifi on viper3d, first time it has happened to my phone
( Don't ask me for help, as I couldn't care if your phone explodes, eh!!!)
Click to expand...
Click to collapse
i am sure it failed to flash newboot.img ( assert( /tmp.....) failed.
Mine doesn´t even want to boot o viper3d.
bihariel said:
i am sure it failed to flash newboot.img ( assert( /tmp.....) failed.
Mine doesn´t even want to boot o viper3d.
Click to expand...
Click to collapse
Yes , doesn't flash newboot.img.
( Don't ask me for help, as I couldn't care if your phone explodes, eh!!!)
there is script error u can fix it manualy
in the zip package change kernel/shooter_u directory to kernel/shooteru
and
modules/shooter_u directory to modules/shooteru
:laugh:
or in updater_script
kernel/shooteru directory to kernel/shooter_u
and
modules/shooteru directory to modules/shooter_u
then it will work
anryl said:
there is script error u can fix it manualy
in the zip package change kernel/shooter_u directory to kernel/shooteru
and
modules/shooter_u directory to modules/shooteru
:laugh:
or in updater_script
kernel/shooteru directory to kernel/shooter_u
and
modules/shooteru directory to modules/shooter_u
then it will work
Click to expand...
Click to collapse
Thanx , first time I have had no wifi, hopefully this will get fixed soon
( Don't ask me for help, as I couldn't care if your phone explodes, eh!!!)
Related
ButteredToast (Buttery smooth and extremely wicked)
CDMA/GSM Ice Cream Sandwich, sense 3.6, 4.x, AOSP
Be Gentle folks: This is my first kernel rodeo after many months of studying how the great ones do it.I hope you like it, if you dont then theres the door (figuratively).
Toolchain/Compiler: linaro 4.7.3
REPO -> https://bitbucket.org/bigwillyg/buttered_toast_shooter
KERNEL SENSE -> ButteredToast Final Version
Sweet kernel -O3 optimized for linaro 4.7.3 compiler (dont ask how, my head still hurts)
Changelog: Changelog is in post #2
Credits: Starting with CG/KeRnElChEf because he is my mentor/tutor/handholder and aside from the enormous obvious contribution, his constant assistance and teaching through out this experience. With out his help I never would have attempted this.
- Johhnyslt
- Faux123 (this equation: (4*HZ+61), the dynamic enhancement of f/sync)
- showp1894 (cmdline options, original cypress version sweep2wake - used as base by CG to write it for AMTEL)
- kernel.org
- CAF
- F2FS article from https://lwn.net/Articles/518718/
- MikeC84
- Ziggy471 (lagfree / smartass)
- Dodava
- Linaro
- creator of BFQ - i have no idea
- creator of SIO - i have no idea
- creator of VR - i have no idea
- developer of LZO
- yank555-lu (first with fast charge, adjust LED timeout via sysfs)
- chad0989 (improved on fast charge)
- Cjoliver
- Anryl
- Agrabren (CM10 cam fix)
If it works well for you GREAT!!! If not Please let me know, logcats for errors are preferred.
Mods: since this is my first thread of this kind, please let me know if I am missing any required info from this post.
CHANGELOG
Code:
- RLS18-FINAL:
PATCH: Patch to LInux 3.0.101
FS: added ExFat support for SDCARD
- RLS17.9:
PATCH: Patch to Linux 3.0.96
- RLS17.7:
PATCH: Patch to Linux 3.0.84
CPU: updated interactive governor from CAF msm-3.4, thanks mrg666 for the tip.
SCHED: updated ROW scheduler from CAF msm-3.4, thanks mrg666 for the tip.
- RLS17.6:
PATCH: Patch to Linux 3.0.80
CPU: updated interactive gov (thanks mrg666 for the tip)
WIFI: updated wifi components to improve stability (thanks mrg666 for the tip)
- RLS17.5:
PATCH: Patch to Linux 3.0.77
SCHED: tried to tweak ROW per johhnyslt's repo to try and get it to work better.
- RLS17.4:
PATCH: Patch to Linux 3.0.74
PATCH: Patch to HTC 2.95 Source
- RLS17.3:
PATCH: Patch to linux 3.0.72
SCHED: added ROW IO Scheduler
MPDEC: sysfs support for max screen off cpu clock added (Chad Goodman all the way, love this guy)
FIX: file ext4 compile errors (Chad Goodman
)
- RLS17.2:
SCHED: was missing a setting to enable power manager.
READAHEAD: was missing a ';', fixed.
- RLS17.1:
PATCH: Patch to linux 3.0.71
Dynamic Readahead from Chad Goodman
AROMA: added 1.6 and 1.7Ghz as selections in aroma.
- RLS17:
RNG: added frandom support, you will need to install crossbreeder or similar to use.
CPU: linaro power patch. Even though its openly available, I got it from Chad Goodman.
CPU: corrected the CPU table and documented each line for clarity (Thank you chad for info)
- RLS16.5:
PATCH: Patch to Linux 3.0.70
- RLS16.4:
PATCH: Patch to Linux 3.0.69
- RLS16.3:
PATCH: Patch to LInux 3.0.68
- RLS16.2:
PATCH: Patch to Linux 3.0.67
- RLS16.1:
PATCH: Patch to Linux 3.0.65
- RLS16:
USB: OTG works again.
CPU: xondemand works.
PATCH: Patch to Linux 3.0.63
- RLS15.3: (broken, dont use it)
XZ: got it working (thanks thicklizard)
- RLS15.2:
PATCH: patch to linux 3.0.62
XZ: added xz compression to kernel.
- RLS15.1:
BLUETOOTH: reverted patch for bluetooth wakelock since issues appear to have started after I applied it.
- RLS15:
CPU: added xondemand cpu governor (thanks to chad for providing the missing piece(s) and Anryl sharing his source as an example)
- RLS14.5:
PATCH: Patch to Linux 3.0.61
- RLS14.4:
PATCH: Patch to Linux 3.0.58
- RLS14.3:
PATCH: Patch to Linux 3.0.57
had to revert the patch for the 3D clock. doesnt need it
- RLS14.2:
FREQ: raised default frequency from 1188 to 1350, can still be changed in aroma
DEVICE: patch from Chad Goodman to help prevent (gfx2d1_clk status stuck at 'off') errors
- RLS14.1:
PANEL: changed brightness back to 3 since 1 didnt work.
PATCH: patch to linux 3.0.56
- RLS14: Birthday Edition
PATCH: patch to linux 3.0.54
PANEL: lowered minimum brightness to 1 to see if it works.
BT: bluetooth wakelock fix from agrebren, courtesy of Dastin1015
AROMA: added back camera driver option in installer.
- RLS13.6:
PATCH: patch to linux 3.0.53
- RLS13.5:
PANEL: added some missing changes for brightness on the shooteru side.
- RLS13.3:
PANEL: added the brightness fix to shooteru because I missed it before. no change for CDMA.
- RLS13.2:
PATCH: Patch to linux 3.0.52
PANEL: adjusted brightness calculation to better sense lowest brightness (thanks to Anryl for help)
- RLS13.1:
PATCH: Patch to linux 3.0.51
AROMA: updated the aroma config to remove the sense vs aosp option and other changes borrowed from CG.
- RLS13 :
SWEEP2WAKE: updates to the driver to allow config via aroma
- RLS12.2:
fixed version number and updated to the linaro 4.7.3 toolchain
- RLS12.1:
patch to linux 3.0.50
- RLS12:
PATCH: patch to linux 3.0.49
TOUCHSCREEN-ATMEL: cm multitouch fix (seems to not affect sense) (Agrebren)
- RLS11.1:
FRAMEBUFFER: refreshrate override - may help with some sense 4.x lag
- RLS11:
VM: lower SYSCTRL latency values to help reduce lag (shooter_u)
VM: lower latency values to help reduce lag
VM: increase default MAX read-ahead
OOM: dont kill kernel threads
DEFCONFIG: update defconfig files for stability
MENUCONFIG: add 'targeted preemption latency for CPU-bound tasks' to menu config
FIX: fix typo, we actally want this to compile
- RLS10:
VM: Add Common VM Settings to MENU CONFIG (thanks Chad)
- RLS09:
Patched to Linux 3.0.48 (kernel.org)
- RLS08:
Patched to Linux 3.0.47 (kernel.org)
- RLS07: (Thanks CG for the making this possible, no kanging please, give credit)
CAMERA: allow for CM10/AOSP compatibility alongside sense 3.6/4.0
SYSFS: add misc sysfs interface for rom type (aosp/sense for example)
DEFCONFIG: gsm and cdma need same name for COMMON modules to work
DEFCONFIG: update defconfig for linaro topology drivers
CPU: linaro arm topology drivers
- RLS06:
BLUETOOTH: made it work with sense and aosp roms (CG, thanks for the fix)
- RLS05:
CM10 camera fix (agrabren/anryl)
CPU: rename cpu info
BOARD: name device
CPU: make use of faster L2 (and FSB) clocks
L2: add 1458, 1512, 1566 L2 Clocks, and set 1404 and over to 360MHz FSB
FSB: define 360MHz FSB
GPU: set GPU clock defaults to max, so aroma has full control
GPU: dont OC by default, allow SYSFS contol over max clock
- RLS04:
GENERAL: fixed shooteru directory names in zip
CAM: applied camera fix in separate build for CM10/AOSP
- RLS03:
DEFCONFIG: had to manually patch shooter_defconfig, last commit didnt complete
DEFCONFIG: upload autogen defconfig files for CDMA and GSM
PATCH: patch to linux 3.0.46
SCHED: prepare for ROW IO scheduler
SCHED: add BFQ IO scheduler
FLASH: reduce battery level requirements for FLASH
WIFI: undervolt wifi card to whitepaper spec
BOARD: add thermald support to device specific files board files
ARM: use generic strnlen_user and strncpy_from _user
CRYPTO: add support for AES128+SHA1 encryption/decryption
NET: add JIT compiler for packet filters
SCHEDULER: set LOAD_FREQ to (4*HZ+61)
SCHEDULER: disable GENTLE_FAIR_SLEEPERS
CPU: kernel based thermal management
CPU: kernel based MPDECISION
CPU: raise PERFLOCK clocks to 1.5Ghz
ZCACHE: update ZCACHE drivers
ZRAM: update ZRAM drivers
COMPRESSION: add support for Google snappy decompression/compression
IO SCHED: add simpleio IO scheduler
IO SCHED: add VR IO scheduler
CPU: add smartass v2 cpu governor
GSM support
- RLS02: PATCH: patch to linux 3.0.45 (kernel.org)
- RLS01: PATCH: patch to linux 3.0.44 (kernel.org)
FILESYSTEM: added F2FS
PATCH: ck-1 patchset
ATMEL: SWEEP2WAKE: enhance driver, add ABOUT to sysfs
F/SYNC: make f/sync dynamic -vs- straight on/off via sysfs
THERMAL: reset some variables to pull maxclock setting from aroma vs kernel default
IO: add BFQ i/o scheduler
IO: add SIO i/o scheduler
IO: add VR i/o scheduler
BCM4329_248: undervolt wifi chipset to whitepaper spec
CPU: add ZIGGY471s custom LAGFREE governor
enable cmdline options
LED: dynamic LED brighness mod
CPU: update cpu core clock control
HEADSET: limit all notifications to single-thread
AROMA: add kernel side support for aroma installer
THERMAL: adjust sensor ID for CDMA
LINARO: MM: linaro specific tweaks/updates
CPU: clean and name tables, allow OC to 1.7GHz
MPDECISION: kernel based mpdecision
PANEL: lower min-brighness from 30 down to 2
INPUT: sweep-2-wake for amtel (shooter/shooter_u)
CDMA BOARD: adjust min/max voltage for cpu, ram, and l2 cache
LZO: update to latest version of LZO driver
CPU Vdd: adjust min/max voltage for cpu, ram, and l2 cache
CPU: allow SYSFS (userspace) control over cpu voltage
SCHEDULER: disable GENTLE_FAIR_SLEEPERS
SCHEDULER: set load_freq to 4.61
BCM4329_248: allow weaker signals to be seen
BCM4329_248: add sysfs control over pm=fast vs pm=max
GPU: allow sysfs (userspace) control over MAX GPU CLOCK (not current clock), and set default max clock
BATTERY: allow sysfs control over usb charge mode (fastcharge)
LED: allow sysfs/userspace control over led notification timeout
GPU-2D: help prevent gfx2d0_clk (or gfx2d1_clk) status stuck at 'off'
GPU-2D MHL: add GPU clocks 266, 228 to the STOCK 200MHz and idle at 200MHz clocks
GPU-2D: add GPU clocks 266, 228 to the STOCK 200MHz and idle at 200MHz clocks
GPU-3D: set GPU clock to 320, 300, 266, 228MHz and idle at 200MHz
CPU: Allow CPU-based alignment handling
USB: add support for usb host mode / otg
VFP: compile vfp for neon
Buttered ToasT Kingdom: it's buttered toast but for the HTC kingdom (HTC Evo design 4G/hero s)
THIS IS ONLY FOR EVO DESIGN 4G OR HERO S!
Rls1 is stock but compiled with linaro using -O3.
Rls2: updated to Linux 3.0.61
Rls3: updated to Linux 3.0.62, added optimizations (thanks chad) and overclocking (thanks 2fast4u88)
Rls4: added missing config to turn on overclocking.
RLS5:
PATCH: Patch to linux 3.0.64
BOARD:Lower sd slot, wifi, wimax power & remove files, CONFIG: add Jesus Phone setting and 1.8GHz setting (OC is a WIP)
CONFIG: remove perflock and add config for overclocking
DEFCONFIG: update defconfig for linaro topology drivers
CPU: Linaro ARM Topology Drivers
SCHED: add BFQ IO scheduler
CRYPTO: add support for AES128 + SHA1 encryption-decryption
NET: add JIT compiler for packet filters
SCHEDULER: set LOAD_FREQ to (4*HZ+61)
SCHEDULE: disable GENTLE_FAIR_SLEEPERS
ZCACHE: update ZCACHE drivers
ZRAM: update ZRAM drivers
COMPRESSION: add support for GOOGLE's SNAPPY decompression-compression
SCHED: add SimpleIO scheduler
SCHED: add VR IO scheduler
CPU: add SmartAss V2 and LAGFREE cpu governors
ARM: use optimized RWSEM algorithm
SWAP: add support for FUDGESWAP
AUDIO: add support for external USB attached DAC devices
BCM4329_248: allow SYSFS control over PM=FAST-PM=MAX
WIFI: add support for bcmdhd drivers with sysfs control over pm=fast-pm=max
SHA-1: use git implementation of SHA-1
LZO: update to latest version of LZO driver
PATCH: CK1 patch
CPU: Allow CPU-based alignment handling
- RLS6:
PATCH: Linux 3.0.65
XZ: add xz to the kernel.
- RLS6.1:
.....CPU: xondemand is now available.
- RLS7:
PATCH: Patch to Linux 3.0.77
CPU: smartassv2, lagfree are back.
Fun stuff from buttered toast shooter will come with time.
REPO -> https://bitbucket.org/bigwillyg/buttered_toast_kingdom
KERNEL SENSE -> ButteredToast_Kingdom-RLS7.zip
Instructions for first time flashing of evo design kernel are here:
SDX Buttered Toast Thread
Here are the settings that I personally pick in aroma:
Governor: ondemand
Min cpu: 384
Max cpu: 1512
Max scr off: 540
S2w: enabled with back light
S2w start: home
S2w end: search
Scheduler: deadline
12/03/2012: With RLS14 and newer, the option for selecting sense vs aosp camera is back. This option is for older base aosp/cm10 roms that still use the aosp camers drivers.
If I missed any settings let me know. Most of these are the defaults, but they are all what I personally choose.
First
Great work man.
Sent from my shooter using Tapatalk 2
Nice!
Sent from my PG86100 using Tapatalk 2
Dude!.... Nice. Downloading now. I know where youre coming from so I am very interested in this.!
Sent from my PG86100 using Tapatalk 2
Nice to see more kernels here.
Edit: I just installed this kernel, performance feels pretty good. I'll give it a couple of days and see how battery does.
Thank you and great job.
Great job on ur first kernal.. can you please provide a quick list of hboot it will work with. Thanks be helpful for us new comers
long time lurker... read search try again
1st page
rose2jam said:
Great job on ur first kernal.. can you please provide a quick list of hboot it will work with. Thanks be helpful for us new comers
long time lurker... read search try again
Click to expand...
Click to collapse
It isn't a stock kernel so it should work with any hboot. I currently run it with the eng-1.04. I have only seen the hboot issue creep up with the stock sprint 2.89 kernel and some sense 4.1 roms.
Thanks for the kind remarks fellas, I would recommend a second reboot 10 minutes in after you let it settle.
Sent from my PG86100 using Tapatalk 2
bigwillyg said:
It isn't a stock kernel so it should work with any hboot. I currently run it with the eng-1.04. I have only seen the hboot issue creep up with the stock sprint 2.89 kernel and some sense 4.1 roms.
Thanks for the kind remarks fellas, I would recommend a second reboot 10 minutes in after you let it settle.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
And I'm running on 1.58 so yea pretty sure it will work on any hboot.
Great kernel man, keep up the good work
Sent from my PG86100 using Tapatalk 2
Hell yeah buddy
Sent from my PG86100 using Tapatalk 2
Nice work on your first kernel. Like it so far. Yes its confirmed to work on hboot 1.58. Keep up the good work
:good:
Nice another Linux 3.0.44 kernel
Glad to see strong development,
thank ya
Sent from my PG86100 using Xparent Blue Tapatalk 2
Nice work!
After a full charge cycle, let me know how it is on battery.
Sent from my PG86100 using Tapatalk 2
bigwillyg said:
After a full charge cycle, let me know how it is on battery.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Congrat on first release mate,
Kangaroo Kernel for the HTC One GSM: Sense ROMs
Linux 3.4.104+, with many features and improvements from Linux 3.12 and 3.14
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For android 4.4.3 Sense ROMs
Based off HTC 6.09.401.5 sources for 4.4.3 Sense
Code:
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems!
Naming convention
KANGAROO KERNEL MKIV IS FOR 4.4.3 ONLY (it will have _443 at the end of the filename)
JOEY AOSP CM (ckxxx): AOSP/CM based ROMs depreciated
JOEY GPE (post 4): sense based 4.4.2 and GPE 4.4.2 depreciated
KANGAROO KERNEL SENSE (kkxxx): sense based 4.4.2 ROMs and GPE only depreciated
Click to expand...
Click to collapse
Features:
Compiled with latest Linaro Christopher83 Linaro 4.9.1 toolchain
Better performance and battery savings due to the use of more efficient algorithms and updated, optimized code
Kernel is aimed at reducing heat while saving battery and increasing performance over stock
IN DEPTH FEATURE LIST IN CHANGELOG AND ON GIT
Better to look at changelog cause I miss things when I try to condense it
CPU governors (italics for default): ondemand, preservative, smartmax, optimax, performance, userspace, msm-dcvs, powersave
io sched: no-op, deadline, CFQ, BFQ, FIOPS
KANGAROO CONTROL SCRIPT IN POST #3
Can be used to control all options, plus more
Click to expand...
Click to collapse
Installation:
1. Download kernel
2. Reboot to recovery
3. Backup
*if you come from faux or tbalden please reflash your rom, you don''t need a wipe. They have some trickery with their own hotplugs so they have reomved mpdecision, so without reflashing your phone will be stuck on quad core*
4. Flash kernel
5. Reboot
*Please let it sit for ~10 mins before judging as it will need to settle down. Do not judge battery life unless you've run it through at least 3+ cycles after flashing*
Click to expand...
Click to collapse
DISCLAIMERS:
1) Excessive under/overvolting can cause damage to the internal parts of your phone. It can cause the phone's lifespan to deteriorate quickly so make sure you know boundaries
2) If you OC'ed/OV'ed/UV'ed and now are in a boot loop or your phone is slow, or acting weird or just died - it means your phone does not like the changes. Voltage control is for those who know what the risks are, know what they are doing and know how to fix it. Perhaps when you change these, test them for an hour or so before setting on boot
3) Any changes to the phone, including flashing the kernel itself is done at your own risk.
4) Every phone is differentt
5) Please DO NOT use any task killers (or additional init.d scripts), they DO NOT improve performance/battery. The kernel is designed to be used with stock settings: my settings and anything else can cause problems
Click to expand...
Click to collapse
Download latest version:
http://forum.xda-developers.com/showthread.php?t=2564895&page=662#post56167960
If you want logo options:
http://forum.xda-developers.com/showpost.php?p=54759427&postcount=5140
Previous versions (4.4.2):
http://www.androidfilehost.com/?w=files&flid=15247
Previous 4.4.3 version found in my changelog links. They are attached to each changelog post
Sauce: https://github.com/poondog/kangaroo-m7-mkIV
*Please do not re upload without permission, I like to count downloads*
Changelog will be in post 2
What is not coming via requests:
- replacement for mpdecision
- additional useless governors
- aroma
- anything useless: this kernel was made for me and I shared it with a few people until now
Click to expand...
Click to collapse
With thanks to (in no particular order)
franciscofranco
faux123
anarkia1976/ak
imoseyon
flar2
teamseven
n3ocort3x
morfic
maxwen
labodj
ktoonsez
tpbklake
janarp
szezso
Synthetic.Nightmare
ZeroInfinity
Sabermod team
Stratosk
Lens-F
Savoca
tiny4579
neniick
geko95gek
Click to expand...
Click to collapse
XDA:DevDB Information
Kangaroo Kernel, Kernel for the HTC One
Contributors
poondog
Kernel Special Features:
Version Information
Status: Stable
Created 2013-12-11
Last Updated 2014-10-20
Changelog: sense kernel
Changelog will go here
4.4.3 Sense kernel:
Code:
*****v072*****21 October*****
.cleaned up MAKEFILE kernel build flags
.some power efficiency enhancement patches, picked from NVIDIA for a15 devices (for greater battery life)
.reverted some msm_hsic_wakelock patches to try to reduce wakelocks (to improve standby times)
.introduce userspace voltage control (min is 650mV)
.some upstream patches for compression
.optimize memcpy for cortex-A15 to memutils (xboxfanj, this is for overall efficiency)
.some Cortex-A15 optimization patches from NVIDIA
.more minor under the hood stuff as always
http://forum.xda-developers.com/showthread.php?t=2564895&page=662#post56167960
*****v068*****04 October*****
.Update toolchain to Linaro 2014.09 4.9.2 for a15 chipsets by Christopher83
.some updates to SELINUX (to do with security)
.introduce OPTIMAX governor (see below)
.introduce PRESERVATIVE governor (see below)
.introduce SMARTMAX governor (see below)
.GPU overclocking (see below)
.imported ULTRASOUND_B sound drivers (see below)
.upstream Linux update to 3.4.104
.allow stock EXFAT and CRYPTO modules to work (thx to bgcngm from dual sim m7, this is experiemental since idk if it works)
http://forum.xda-developers.com/showthread.php?t=2564895&page=636#post55825791
*****v058*****14 September
.shorten some wakelocks (for better sleeping)
.some more tweaks for better overall battery and performance
.upstream fixes and improvements to TOPOLOGY drivers (to do with queuing of tasks to individual cores, from Linaro)
.optimize TOPOLOGY further for Krait devices (neobuddy89)
.introduce BFQ IOSCHED v7r5
.introduce FIOPS IOSCHED (default)
.enable ILLINOIS to be set as default, and set it default for TCP
.introduce LINARO POWER EFFICIENT WORKQUEUES (heaps of battery savings)
.some fixes to bluetooth
.upstream backports to EVENTPOLL subsystem from 3.14+ (Efficient event retrieval implementation, thx neobuddy)
.fix some more compile warnings for better optimized code (cl3kener)
.drop i2c clock a bit more (to save battery, ref. @zeroblade1984/Samsung/OPPO
.remove some more debug (less energy waste)
.strip most debug from modules, reduce size by 90%
.enable all sleep states, based on 4.4.2 kernel tests (for better battery especially in sleep)
.remove depreciated sched sysfs since they are removed up upstream kernels and don't really do anything
.some LINARO ARM code improvements
.update to HTC 6.09.401.5 kernel source (not much really lol, a few internet related fixes)
.introduce USB FAST CHARGE (flar2, off by default)
.cleanup some HTC junk
.some improvements to LOWMEMORYKILLER from moto/upstream (to do with multitasking)
.some improvements to ONDEMAND governor for better power savings with no smoothness loss
.fixed USB DAC audio (Thanks @hq5 for testing)
.introduce KEXEC_HARDBOOT aka MULTIROM (still needs patched RAMDISK, I do not include this)
.fix compass on Sprint and Verizon (brymaster5000)
.add some more doge
http://forum.xda-developers.com/showpost.php?p=55423362&postcount=5983
*****v045*****6 September*****
.2w: change feedback slightly, now it doesn't vibrate heaps on sweep2sleep
.further updated workqueue (for better battery and efficiency)
.some network tweaks
.heaps of "under the hood" improvements (lead to better efficiency for speed/battery)
.reduce internal USB wakelocks to improve battery
.patched kernel futex vulnerability (from CM, for security)
.compress with LZ4 for faster boot speeds and built with latest binary
.updated all compressors to latest versions
.add lower GPU frequencies and scale to them (for better battery)
.upstream backports to OOM handler from 3.16+ (related to memory use, see here https://www.kernel.org/doc/gorman/ht...rstand016.html)
.optimized deadline scheduler for better use on flash
.quad core cpu stats (faux123)
.lower max i2c clock to 384MHz to save some juice, no negative effects in testing
.some general code fixes and improvements
.enable ILLINOIS tcp algorithm and set default
.enable NTFS r/w support
http://forum.xda-developers.com/showthread.php?t=2564895&page=582#post55259490
*****v027*****30 August*****
.massive improvements to the workqueue, synced with AOSP+ (franciscofranco)
.BCM4335: attempt to decrease wakelocks
.signature tweaks to SLIMBUS (me/zeroinifity)
.msm: memutils: memcpy, memmove, copy_page optimization from motorola
.use freezable blocking calls kernel wide (for more efficiency and less waste of resources, comes from upstream android)
.slimmed down kernel, stripped of some things it doesn't need
.removed some more debugging
.much under the hood tweaks (wow)
http://forum.xda-developers.com/showpost.php?p=55136831&postcount=5636
*****v021*****22 August*****
.2w: default to sweep2wake and doubletap2wake on
.backport RANDOM and RANDOM32 drivers from Linux 3.16. FULL port, not just a few patches
.patch all the way to Linux 3.4.103 latest. These include bugfixes, enhancements that have been seen fit to be merged into the mainline 3.4.y kernel
.scale L2 and CPU in sync, up to 1134MHz where the L2 maxes out. Results in smoothness at higher freqs and battery saving at lower
.begin to work on workqueue, for now just a few fixes
.drop all CPU voltages by 50mV for battery improvement and heat reduction
.begin to tweak kernel to be cooler and leaner
http://forum.xda-developers.com/showthread.php?p=54976133#post54976133
*****v006*****5 August*****
.patch upstream to 3.4.25
.introduce all 2w features from Kangaroo Kernel 4.4.2, including dt2w, s2w, bi-directional etc
.button backlight notifications (tbalden)
.tweak makefile flag optimizations based on our testing on 4.4.2 Sense
.some minor fixes and enhancements
.disabled systemrw protection (Tiny4579)
http://forum.xda-developers.com/showthread.php?p=54619213&highlight=update#post54619213
*****v001*****29 July*****
.few compiler tweaks based on what worked well on 4.4.2 kernel
.some minor code optimizations and fixes
.compile with Christopher83 Linaro 4.9.1 2014.07 toolchain
.vfp with neon hard optimization levelz
http://forum.xda-developers.com/showpost.php?p=54454303&postcount=4973
Recommended settings
Recommended settings: balance between performance and battery
Trickstermod recommended
TCP congestion: ILLINOIS
Read ahead buffer: 128
IO scheduler: FIOPS(default settings)
CPU min freq: 384MHz
CPU max freq: 1728MHz
CPU governor: ondemand (default settings)
mpdecision: on
GPU gov: ondemand
GPU max freq: 487.5MHz
VOLTAGES: default, since its been tried and tested
PNPMGR: on
Click to expand...
Click to collapse
Officially supported ROMs (the kernel is tested on these)
.ViperOne 7.0.0 (6.09.401.5 base)
.MaximusHD 44.0 (6.09.401.5 base)
Click to expand...
Click to collapse
__________________________________________________________________
--------------------------------------------------------------------------------------------------------------
OFFICIAL KANGAROO KERNEL INIT.D SCRIPT: ALL YOUR NEEDS ON BOOT WITHOUT THE NEED OF AN APP!
HUGE thanks to Headless_monkeyhunta96, hit his thanks button!
DOWNLOAD IT FROM HERE
If you're gonna use the script.. Leave the name intact and give credits to poondog/headless_monkeyhunta96 where due
Click to expand...
Click to collapse
Joey Kernel CM for HTC One
Joey Kernel CM for HTC One
CM/AOSP based ROMs
android_kernel_htc_msm8960 core from CM
Features:
Compiled with latest Linaro Christopher83 Linaro 4.9.1 toolchain
Better performance and battery savings due to the use of more efficient algorithms and optimized code
Optimized configuration: stripped of wasteful debug and things that are useless on android phones
Patched to latest upstream Linux 3.4.y
Build/memory optimizations
CPU undervolted by 50mV
Userspace voltage control
msm_thermal from showp1984 tuned for med-cool
Advanced TCP algorithms (westwood default)
Backports from CAF/upstream
Stripped a lot of debugging
memutils: memcpy, memmove, copy_page optimization (moto)
enhancements and fixes from motorola open source repos
out of memory and memcontroller updated from Linux 3.14+ (neobuddy)
kernel mode NEON
use freezable blocking calls (faux123/CAF for improved efficiency and battery savings)
generic strnlen_user() function used in many instances
compressed with LZ4
L2 clocks synced with CPU clocks
Linaro Power Efficient Workqueues
slimbus backport from Nexus 5
CAF updates to slimbus
slimbus OC MKII+some more tweaks (Poondog/ZeroInfinity)
ported HTC ONDEMAND, PERFLOCK, ADAPTIVE TUNING, IDLE STATS and PNPMGR for optimium battery and smoothness
CPU governors (italics for default): preservative, conservative, smartmax, ondemand, performance
io sched: no-op, deadline, CFQ, ROW, FIOPS
Click to expand...
Click to collapse
Download latest version:
http://forum.xda-developers.com/showpost.php?p=54132749&postcount=4432
see here for more details:
http://forum.xda-developers.com/showthread.php?p=53561527
http://forum.xda-developers.com/showpost.php?p=54132749&postcount=4432
Kernel sauce:
https://github.com/poondog/android_kernel_htc_msm8960
Changelog:
Code:
*****14 July*****
.continue porting of HTC perflock, adaptive tuning, idle_stats (me/htc)
.merge upstream CM kernel
.merge upstream CAF
.some device specific changes from CM
*****21 June*****'
.bumped readahead to 512kb max
.build with new toolchain 2014.06 Christopher83 Linaro 4.9.1
.Update to latest 3.4.94
.squashed some build warnings
.improve cpuidle from Kangaroo Kernel logic
.merge with latest CM, includes many driver updates
.begin port of PNPMGR from Sense source (tiny4579)
.port HTC ondemand gov from Sense source complete with multiphase and all HTC goodness. Uses input boost interface hoocked with cpufreq. Results in more smoothness and better battery in comparison to CAF ondemand due to boost freqs (me/HTC)
.update vibrator drivers from Sense source (me/HTC)
.some fixes from Kangaroo Kernel
.improved boot time by init to max (moto)
.backported SLIMBUS from Nexus 5 source
.merged CAF updates for Slimbus for the latest drivers, minus the qmi parts which we don't have hardware for
.slimbus tweaks are back (me/Zeroinfinity)
*****15 June*****
.so update
.introduce Linaro Power Efficient workqueues
.upstreamed oom to Linux 3.14+
.sync with latest CM/CAF
.sync with latest kernel.org 3.4.93
.introduce BFQ-v7r4-3.4 with Early Queue Merge
.introduce FIOPS scheduler core
.some enhancements to the block subsystem (to do with scheduling)
.add 3 phase BRICKED thermal, used defaults from Kangaroo Kernel (thx showp1984)
.introduce userspace voltage control (same implementation in Kangaroo Kernel, from myfluxi)
.introduce PRESERVATIVE cpu governor, sync with latest and Kangaroo defaults
.Introduce SMARTMAX cpu gov, also synced with latest and Kangaroo defaults
.squash conservative governor from upstream as used in Kangaroo
.build with Christopher83 4.9.1 2014.05 toolchain with build flags from Kangaroo
.motorola memory enhancements
.bumped readahead max to 512kb
.introduce slimbus OC from Kangaroo Kernel
.sync L2 clocks and CPU clocks up to 1134MHz
.drop voltages by 50mV
.much under the hood stuff that I can't write in english
.wow
Kangaroo Kernel MKIII for 4.4.2 Sense
(depreciated)
RIP
Kangaroo Kernel for the HTC One GSM: Sense ROMs
Linux 3.4.103+, with many features and improvements from Linux 3.12 and 3.14
For android 4.4.2 Sense ROMs
Based off HTC 5.11.401.10 sources for 4.4.2 Sense
Code:
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems!
Naming convention
KANGAROO KERNEL SENSE (kkxxx): sense based 4.4.2 ROMs and GPE only
JOEY AOSP CM (ckxxx): AOSP/CM based ROMs--> every rom not based on Sense or GPE
JOEY GPE (post 4): sense based 4.4.2 and GPE 4.4.2 depreciated
KANGAROO KERNEL MKIV IS FOR 4.4.3 ONLY (it will have _443 at the end of the filename)
Click to expand...
Click to collapse
Features:
Compiled with latest Linaro Christopher83 Linaro 4.9.1 toolchain
Better performance and battery savings due to the use of more efficient algorithms and optimized code
Optimized configuration: stripped of wasteful debug and things that are useless on android phones
Patched to latest upstream Linux 3.4.y
Build/memory optimizations
Utilize all possible CPU sleep states
CPU undervolted by 50mV
Overclock GPU to 487MHz
Userspace voltage control
CPU stats (quad core)
custom thermal driver for optimum control over cpu temperature and throttle
powersaver cpu cap in-kernel to cap max freq without disabling pnpmgr
Scheduler improveents
Slimbus OC!
Audio tweaks and improvements
ULTRASOUND_A from latest CAF source
Advanced TCP algorithms (westwood default)
GPU tweaks, underclocked with freqs 27, 128, 200, 320, 400, 487MHz
Increased GPU BUS bandwidth
Backports from CAF/upstream
Stripped a lot of debugging
SELINUX up to date with latest Google source
memutils: memcpy, memmove, copy_page optimization (moto)
enhancements and fixes from motorola open source repos
msm: dma: upstreamed to CAF
kernel RANDOM number generator from Linux 3.16+ (dorimanx)
out of memory and memcontroller updated from Linux 3.14+ (neobuddy)
eventpoll updated to Linux 3.14+
ext4: upstreamed to latest CAF
qdsp6v2 audio format drivers from latest CAF
mm: optimized KSM
upstreamed random32 drivers to Linux 3.16+
kernel mode NEON
update/ optimize mutex functions (faux123/CAF for improved multitasking
use freezable blocking calls (faux123/CAF for improved efficiency and battery savings)
generic strnlen_user() function used in many instances
support kernel side for f2fs (Samsung--> needs ramdisk support, see your rom "chef")
implement kexec_hardboot aka multirom support in kernel (again needs ramdisk support)
tcp small queues, early retransmit, auto corking, speed tweaks
reduced wifi wakelocks
2w options (s2w, dt2w, l2m etc: flar2, default s2s/dt2w bottom of screen)
bi-directional sweep2wake
compressed with LZ4 binary r120
L2 clocks synced with CPU clocks
BUS tweaks and updates
reduced HSIC wakelocks
Linaro Power Efficient Workqueues
Linaro CPU topology, updated and enhanced for Krait CPUs
USB force fast charge
slimbus OC MKII+some more tweaks (Poondog/ZeroInfinity)
MORE IN DEPTH FEATURE LIST IN CHANGELOG AND ON GIT
CPU governors (italics for default): preservative, conservative, smartmax, ondemand, performance, userspace, msm-dcvs, powersave
io sched: no-op, deadline, CFQ, ROW, FIOPS, BFQ, SIO
KANGAROO CONTROL SCRIPT IN POST #3
Can be used to control all options, plus more
Click to expand...
Click to collapse
Installation:
1. Download kernel
2. Reboot to recovery
3. Backup
*if you come from faux or tbalden please reflash your rom, you don''t need a wipe. They have some trickery with their own hotplugs so they have reomved mpdecision, so without reflashing your phone will be stuck on quad core*
4. Flash kernel
5. Reboot
*Please let it sit for ~10 mins before judging as it will need to settle down. Do not judge battery life unless you've run it through at least 3+ cycles after flashing*
Click to expand...
Click to collapse
DISCLAIMERS:
1) Excessive under/overvolting can cause damage to the internal parts of your phone. It can cause the phone's lifespan to deteriorate quickly so make sure you know boundaries
2) If you OC'ed/OV'ed/UV'ed and now are in a boot loop or your phone is slow, or acting weird or just died - it means your phone does not like the changes. Voltage control is for those who know what the risks are, know what they are doing and know how to fix it. Perhaps when you change these, test them for an hour or so before setting on boot
3) Any changes to the phone, including flashing the kernel itself is done at your own risk.
4) Every phone is differentt
5) Please DO NOT use any task killers (or additional init.d scripts), they DO NOT improve performance/battery. The kernel is designed to be used with stock settings: my settings and anything else can cause problems
Click to expand...
Click to collapse
Download latest version:
http://forum.xda-developers.com/showthread.php?p=54937723
All previous versions:
http://www.androidfilehost.com/?w=files&flid=15247
Sauce: https://github.com/poondog/kangaroo-m7-mkIII
*Please do not re upload without permission, I like to count downloads*
Changelog will be in post 2
What is not coming via requests:
- replacement for mpdecision
- additional useless governors
- aroma
- anything useless: this kernel was made for me and I shared it with a few people until now
Click to expand...
Click to collapse
With thanks to (in no particular order)
franciscofranco
faux123
anarkia1976/ak
imoseyon
flar2
teamseven
n3ocort3x
morfic
maxwen
labodj
ktoonsez
tpbklake
janarp
szezso
Synthetic.Nightmare
ZeroInfinity
Sabermod team
Stratosk
Lens-F
Savoca
tiny4579
neniick
geko95gek
Click to expand...
Click to collapse
Code:
CHANGELOG:
*****v138*****20 August*****
.patch to upstream 3.4.103
.overclock the GPU to 487MHz. I added an extra step, not replaced what we had (see below)
.disable some more debug (less wastage of energy for greater battery life)
.disable F2FS, who even knew it was here anyway
.updates to kernel processes from CAF/upstream
.lower max i2c clock to 384KHz, to save battery
.minor updates to ONDEMAND gov from tiny4579/stratosk
.import ULTRASOUND audio drivers from latest CAF. We are using ULTRASOUND_A, made for msm8960 (improves audio playback)
http://forum.xda-developers.com/showthread.php?p=54937723
*****v132*****12 August*****
.cleaned up touchscreen drivers and removed whitespaces
.build version is changed slightly to show kangaroo kernel mkiii, to differentiate between 4.4.3
.cleaned up thermal drivers since last release
.some changes to thermal algorithm to be more reliable and more accurate
.tuned thermal for a bit cooler (see below)
.remove some debugging in sched (less wasted energy)
.misc optimizations/updates for compression/decompression (more reliable, ref. cl3kener git)
.misc optimizations/updates for CPUFREQ
.updated RANDOM32 driver from Linux 3.16.y kernel
.updated RANDOM driver from Linux 3.16.y kernel (see below, ref. dorimanx git)
.ported new random driver for use on m7 s600 (me)
.cleaned up vibrator driver (more optimized and usable code now)
.lower default 2w vibration to 18, down from 20
.SMARTMAX: use new relation_C to better choose frequencies
.PRESERVATIVE: use new relation_C to better choose frequencies
.upstream improvements to kernel sync drivers (effects general operations, and io related things)
.upstream improvements to sched (will effect general performance and battery)
.updated LZ4 kernel compression binary to r120
.merge upstream Linux kernel 3.4.102
http://forum.xda-developers.com/showthread.php?t=2564895&page=527#post54771268
*****v122*****26 July*****
.thermal: bring in new thermal driver. Seems to have better control over freqs compared to before. Butchered it. Now we have some weird roo thermal beast. See below. (myfluxi, me)
.introduce powersaver cap for limiting cpu max freq (me, see below)
.patch to upstream 3.4.99 (kernel.org)
.2w: rewrote this is some places. Add support for bi-directional sweep2wake and sweep2sleep (thx @Savoca for a few pointers and the idea, flar for the original code, see below)
.compile with new toolchain 4.9.1 Christopher83 2014.07
.disable HTC write protection (thx Tiny)
.clean up some drivers of unneeded code
http://forum.xda-developers.com/showpost.php?p=54408387&postcount=4819
*****v116*****18 July*****
.update BFQ-v7r5 I/O sched for 3.4 complete with Early Queue Merge
.tune smartmax tunables for more battery (thx @Rad Ryan)
.fixed sound issues from v110
.merge upstream Linux 3.4.98
.updates to lz4 kernel side code
.updated to lzo kernel side
.new freq relation for Ondemand gov adapted for HTC Ondemand(stratosk, see below)
.tune deadline iosched for better performance (myfluxi)
.some updates merged from Nexus 7 L preview
http://forum.xda-developers.com/showpost.php?p=54226594&postcount=4555
*****v110*****8 July*****
.backported futex updates and fixes (for vulnerability, cred kernel.org/CM)
.some fixes for gpu
.updates to Linaro topology
.add Krait specific topology values (for cpu efficiency, neobuddy89)
.fix all audio bugs. ALL OF THEM
.mutex enhancements from v085 (CAF)
.disabled some useless govs, you won't even notice them missing :P
.enable all PM sleep states (see below)
.updated installer script for all devices. Delete thermal and thermal backup files on flash *IF YOU FLASH ANOTHER KERNEL REFLASH ROM FIRST* (thx @Ser35) Remember we have custom kernel side thermal manager so all g
.update LZ4 binary to latest r119 (to do with kernel compression)
.patch to latest Linux 3.4.97
http://forum.xda-developers.com/showpost.php?p=53972164&postcount=4222
*****v100*****23 June*****
.base 5.11.401.10 (m7ul-3.4.10-g3c4bd25 )
.throttle earlier
.fixed audio bugs
.import conservative gov from 3.15+
.patch to 3.4.94
.update toolchain to latest 2014.06 4.9.1 Christopher83
.some under the hood stuff
.revert some stuff from v085 since it caused issues
http://forum.xda-developers.com/showpost.php?p=53611734&postcount=3948
*****v085*****8 JUNE*****
.misc updates to congestion stuff and sched (for greater efficiency and battery)
.fix bluetooth for Sprint and Verizon (thx Brymaster)
.thermal: a bit cooler on the higher phases
.cpufreq: ported CONSERVATIVE gov from Linux 3.14+ (stratosk, kernel.org)
.improvements to memory model section of kernel (to do with processing stuff)
.mutex enhancements from CAF
.update SELINUX from 4.4.3 google source (kernel side security)
.some misc updates from google 4.4.3 source
.under the hood stuff (see git)
http://forum.xda-developers.com/showthread.php?p=53243483
*****v077*****31 MAY*****
.updates to msm_bus for better performance, particularly in gaming
.support Sprint and Verizon (will link their threads later)
.enabled all thermal devices
.support 3 phase bricked msm_thermal (showp1984)
.port thermal to our setup
.setup thermal for pretty cool: see below
.support more TCP algorithms (for data congestion control)
http://forum.xda-developers.com/showpost.php?p=53047467&postcount=3372
*****v068*****26 MAY*****
.build with Linaro CR83 2014.05 4.9.1 toolchian (update from last months)
.upstream to Linux 3.4.91 (kernel.org)
.added preservative governor latest version, tweaked for m7 (bedalus, me)
.added smartmax governor, set m7 defaults (maxwen, me)
.added easter eggs
.reverted dubious sched changes that brought small stutter
.reverted cpuidle to stock to fix sleep times and battery (sorry )
.some misc fixes
.updated BFQ-v7r4 I/O sched for 3.4
.add Early Queue Merge (EQM) to BFQ-v7r4 for 3.4.0
http://forum.xda-developers.com/showthread.php?p=52912948
*****v059*****18 MAY*****
.idle the gpu properly
.decrease mmc wakelocks and time to enter deep sleep (tripnraver)
.update latest caf topology (to do with CPU behavior, Linaro/Synthetic.Nightmare)
.update lz4 compression binary to r117 and some tweaks to compression
.reduce wifi wakelock by a lot (Imoseyon, me)
.patch upstream to Linux 3.4.90
.disabled some crap from defconfig to make the kernel leaner
.complete backport of CPUIDLE from Linux 3.14 (see below)
.some device map fixes
http://forum.xda-developers.com/showpost.php?p=52736996&postcount=2964
*****v044*****9 MAY*****
.implement hashtable introduced in 2e41ba2df20f986b8ae722b9979a57e3ffe31f68 for moar drivers (efficiency)
.merged many rwsem patches from mainline Linux (to improve rw semaphores)
.userspace voltage control (myfluxi, see below)
.minor sound driver update
.build with Christopher83 Linaro 4.9.1 toolchain by default now
.cpufreq drivers rewritten in some places to be more logical and efficient (Linaro)
.some minor tcp tweaks (releted to data use)
.more tweaks to slimbus (see below)
.patch to 3.4.89
http://forum.xda-developers.com/showthread.php?p=52518763
*****v040*****2 MAY*****
.slimbus updates backported from latest CAF 3.5 for msm (audio playback)
.out of memory and memcontroller updated from Linux 3.14+ ((for multitasking/battery, thx neobuddy)
.enhancements to lowmemorykiller (improved multitasking)
.SLIMBUS overclocking MKII (see below) Poondog/@ZeroInfinity
.2W: updates from flar (not including gestures)
.cpuidle: update functions from CAF/Linaro for better idle
.update eventpoll to Linux 3.14+ too (Efficient event retrieval implementation, thx neobuddy)
.update BFQ iosched to v7r3 (fiops still default)
.remove some armv7 specifications
.some makefile changes
.patch upstream to 3.4.88
*****v033*****25 APR*****
.sched/fair: Optimize find_busiest_queue()
.sched/fair: Optimize cgroup pick_next_task_fair()
.USB Fast Charge (Chad Froebel, Motley, Flar2: default is off)
.update some qdsp6v2 audio format drivers to latest CAF
.WORKQUEUE: introduce Linaro Power Efficient Workqueues system wide (Linaro)
.backported 3.12+ kernel scheduler features/fixes/enhancements (faux123/kernel.org for better multitasking etc)
.more under the hood stuff (see git)
.reduce memory usage by input driver
.some kernel enhancements and fixes from motorola (Synthetic.Nightmare/Motorola)
.remove old slimbus drivers.
.ported slimbus drivers from HTC m8/Nexus 5 (same driver)
*****v027*****18 APR*****
.compressed kernel with LZ4 compression. Theoretically much faster decompression speeds, lossless compression. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO
.enable automatic process group scheduling
.overall stats: fix for quad core (faux123)
.Introduce BFQ-v7r2 scheduler for 3.4
.Introduce ROW scheduler and tune to franciscofranco values for mako/hammerhead
.Introduce FIOPS scheduler latest version (default scheduler)
.Introduce SIO scheduler
.ASoC: Propagate device HW delay to AFE, add buffer overflow check (aznrice)
.ACPUCLOCK: sync L2 cache speed to CPU speed up until 1134MHz. This improves smoothness by bumping the L2 speed up at required set boost freqs such as 918 and 1026MHz
.SELinux: Reduce overhead of mls_level_isvalid() function call (optimizations to SELinux picked from faux123 git)
.more under thehood code fixes improvements optimizations
.remove some debugging from device configuration
.undervolt all PVS versions by 50mV (should save some battery and heat)
.update to @Christopher83 Linaro 4.8.3 2014.04 toolchain, love your toolchains mate
.patch to Linux 3.4.87 latest
.some patched from mako devs to decrease the HSIC wakelock
*****v022*****11 APR*****
.patch to latest linux upstream 3.4.86 (kernel.org/gregkh, 3.4.y maintainer)
.kgsl: Fix Z180 memory leak
.2W: set dt2w default to fullscreen
.update/ optimize mutex functions (faux123/CAF for improved multitasking)
.use freezable blocking calls (faux123/CAF for improved efficiency and battery savings)
.generic strnlen_user() function used in many instances
.time: update some functions of timekeeping.c to latest CAF
.support kernel side for f2fs (Samsung--> needs ramdisk support, see your rom "chef")
.implement kexec_hardboot aka multirom support in kernel (again needs ramdisk support)
.implement memory optimizations into makefile (sparksco/sabermod team, this was the change in SEMEM test)
.add tcp small queues, early retransmit, auto corking, speed tweaks (anarkia1976, to do with networks/internet etc)
.board: reset to stock HTC spec, make thermal kick in earlier
.leds: set blink button notifications default
.build: replaced timeconst.pl with a bc script
.updater-script: tweaked progress bar, set permissions and delete system/lib/modules
*****v015*****7 APR*****
.msm: dma: upstreamed to CAF
.kernel random gen driver updated to Linux 3.14+ (faux123)
.ext4: upstreamed to latest CAF (mrg666/CAF)
.ASoC: increase buffer sizes for low latency audio playback
.block/partitions: optimize memory allocation in check_partition()
.mm: optimized KSM
.upstreamed random32 drivers to latest CAF to work with ext4 updates
.kernel mode NEON
.Enable NEON optimized crypto routines
.2w options (s2w, dt2w, l2m etc: flar2, default s2s/dt2w bottom of screen)
.build: add build flags simplified version with -O2 optimization (used to be -Os) as per testing. (stratosk)
.fixed boot issues for the people who had problems
*****v009*****1 APR*****
.optimizations to SLUB
.memutils: memcpy, memmove, copy_page optimization (from motorola: speed and battery)
.set LOAD_FREQ 4*HZ+61
.remove some more kernel debugging which is wastefuil for us
.switch do_fsync() to fget_light()
.increase BUS at lowest GPU freq
.some makefile tweaks
.Patch to upstream 3.4.20
.entropy tweaks in random (Imoseyon leankernel)
.some GPU tweaks from CM including scale GPU from 128MHz to 400 (instead of 200 min now)
*****v004*****29 MAR*****
.build with Linaro 2014.03 toolchain optimized for cortex a15 by @Christopher83.. he is a beast :P
.build optimizations in makefile and arch/arm/makefile
.some fixes for improved battery and performance (overall efficiency)
.removed a lot of debugging (wasteful when there are no issues to debug :P)
.some fixes to acpuclock-krait
.slimBUS OC from my Joey kernel @ZeroInfinity and me
.workqueue fixes
.enabled advanced TCP congestion algorithms (westwood is stock)
Joey Kernel for the HTC One GSM Google Play Edition 4.4.2
(depreciated)
RIP
Linux 3.4.15+
For android 4.4.2 Google Edition ROMs.. (kk Sense too )
Based off HTC 3.62.1700.1 sources
Features:
Compiled with latest Linaro 4.8.3 2013.11 toolchain
Baby version of Kangaroo Kernel. Contains most patches and features found in main Kangaroo Kernel.
Better performance and battery savings due to the use of more efficient algorithms and optimized code
Focused on battery life: freqs from 384-1566MHz capped for battery and optimimal performance in normal use.
Power management tweaks
Slightly undervolted: -50mV for PVS 0,1,2,3,4 and -25mV for PVS 5,6,7 (acpuclock identical to kangaroo)
Undervolted L2 clocks
Optimized configuration: stripped of wasteful debug and things that are useless on android phones
Optimized with -Ofast
Compressed with LZ4
CPU stats
CPU freqs cut down to stop confusing the governors etc: there is no point having freqs that are so similar when it behaves the same anyway
Faux sound control
Faux display color control!!!
Support for Multi ROM
Scheduler improvements
Random/entropy tweaks
Linaro power efficient workqueues
Linaro topology
Advanced TCP algorithms (westwood default)
ARM/VFP optimizations
Support for kernel mode NEON
Screen wake options: S2W/DT2W/L2M/L2W etc (flar2 implementation, s2s only is default)
Updated cpuidle
Updated freezer functions
Improvements to ondemand governor
USB fast charge
User voltage control
Optimized deadline IO sched: default
LED blink buttons
GPU improvements, underclocked with freqs 128, 200, 320, 400MHz
Backports from CAF/upstream
SLIMbus OC (me/ZeroInfinity)
SLIMbus updated from upstream
USB fast charge
Upstream updates to SLUB allocator
CPU governors (italics for default): ondemand, performance, conservative, msm-dcvs, smartmax, userspace
io sched: no-op, deadline, cfq
Click to expand...
Click to collapse
See OP for installation and disclaimers
Download latest version:
JoeyKernelGPE_30jan.zip - 8.68 MB
^WARNING THIS IS OLDDDDDDD
For GPE 4.4.2
but working on 4.4 Sense ROMs
*Please do not re upload without permission, I like to count downloads*
Sauce: https://github.com/poondog/joey-m7-GPE/
Changelog: Joey Kernel (4.4.2 GPE)
Code:
*****30 Jan*****
.sync and fsync enhancements
.disable some more debugging
.support LZ4 compression (thx @Synthetic.Nightmare for helping)
.compress zimage by LZ4, results in 9.7mb zimage (large lol) Should boot faster if my theories are correct, because decompression time is a lot less?
.ARM/VFP optimizations, see source for details. Support kernel mode NEON and enabled NEON optimized crypto routines (myfluxi)
.synaptics_3k: Do not hardcode pressure & width (Synthetic.Nightmare)
.synaptics_3k: Improve touchscreen sensitivity (Synthetic.Nightmare)
*****24 Jan*****
.fixup ASYNC_FSYNC declaration in kconfig (if anyone else is compiling.. thx tripnraver)
.backport sched updates from 3.4.77+
.arm: Allow CPU-supported unaligned accesses
.makefile: remove -marm flag, see if it makes any difference in smoothness
.switch back to in kernel thermal control, from tripnraver kernel (CAF/trip)
.made thermal throttle at around 55 degrees, to keep phone cool (its summer here) and battery lasts longer.
.introduce WHEATLEY governor. Ondemand is still default
.add ROW io scheduling algorithm, tune for our devices
.mm: optimizations to io
.mm: optimize Kernel Samepage Merging(KSM)
.mm: Squash a few SLUB commits from CAF
*****19 Jan*****
.undervolt L2 clocks by default by 50mV for better battery
.smoothed out BUS scaling (now uses 266MHz step instead of jumping from 200 -->400
.increase max/reduce min buffer size for playback of audio
.revert to stock thermal. Tweaked it a bit to throttle earlier.. HTC thermal is quite good on battery
.random/entropy tweaks (for better performance and battery, credits imoseyon/anarkia1976)
.fixed sleeping issue.. now it is better than before
*****16 Jan*****
.audio: remove handset pop-noise
.DRIVERS: CPUFREQ: revert to stock GPE ondemand governor, then tweaked it a bit again
.DEFCONFIG: compress with xz (smaller kernel/ faster boot)
.SLIMbus: updates from upstream/CAF
.ASoC: msm: qdsp6: Fix pop noise seen with touch tone during playback
.ALSA: PCM - Add PCM creation API for internal PCMs.
.SELINUX: update to 3.4.76+
.Set default 2w to dt2w, s2s, pocket detect, increase default vibration
.sched: set sched_mc_power_savings to 2 (try to restrict things to one core)
.import crpalmer/flar2 thermal. Thanks to them. Tweaked for battery and extra extra cool.
.remove some debug
.writeback updates from upstream
.remove faux color interface, was troublesome.. some new commits in his repo they don't boot for me :)
Audio, selinux, slimbus, thermal update mostly.. if you were hoping for something else sorry :)
*****8 Jan*****
.dt2w: sync with flar2 kernel, more sensitive, limit to bottom part etc (flar)
.attempted fix for wifi wakelocks (working for me in testing, what was minimal is even less now)
*****2 Jan*****
.Overclocked slimbus to max. This is as high as it goes, its 100% stable in testing with no negative impacts. Brings improvements all around for audio playback etc (thx to @ZeroInfinity and me :icon_bigg)
.Some generic function optimizations (for faster kernel, better battery.. overall improvements to the code, from CAF)
.Add USB Fast Charge (Flar, Motley, Chad Froebel for original mod)
*****28 Dec*****
.optimizations to cacheflush function (minimal under the hood stuff)
.updates to lowmemorykiller from Linux 3.10+ (syntheticnightmare)
*****24 Dec*****
.updated Linaro workqueues (battery savings)
.integrated linaro power efficient workqueues deep in the kernel (battery savings)
.color control
.patch to 3.4.15
.compile -Ofast
.selinux updates
.use Ste98B tunables for smartmax (thx mate)
*****17 Dec*****
.Initial release
...
Slightly undervolted: -50mV for PVS 0,1,2,3,4 and -25mV for PVS 5,6,7
...
Click to expand...
Click to collapse
Hey, mate, great work!
But, if I'm not mistaking, there is no PVS 7 and 0 is worst, whist 6 is best, so undervolting should be other way around?
Excuse the question, but it is because the majority of call recording applications are to pay, why developer no supports this feature in HTC one?
Enviado desde mi HTC One mediante Tapatalk
donmarkoni said:
Hey, mate, great work!
But, if I'm not mistaking, there is no PVS 7 and 0 is worst, whist 6 is best, so undervolting should be other way around?
Click to expand...
Click to collapse
Cheers
Sorry that was a typo lol
Yes you're right but this is how it has been done:
Since the voltage tables are different for all PVS versions, PVS 0 having the most voltage and 6 the least, 0 can handle -50mV compared to stock and still use more voltage and be stable, while still having more voltage than 6. Pushing 6 to more than what I have already done is risky since it is so low already, on a mass scale and I don't think I will do it unless it is proven stable
edit: https://github.com/poondog/kangaroo-m7-MKII/blob/exp/arch/arm/mach-msm/acpuclock-8064.c
Lo_RaT_PeNaT said:
Excuse the question, but it is because the majority of call recording applications are to pay, why developer no supports this feature in HTC one?
Enviado desde mi HTC One mediante Tapatalk
Click to expand...
Click to collapse
Probably. Looking at his/her sources there are no references to the One. The newest is for mako (Nexus 4)
In my point of view, there is no point for a kernel dev (learning or experienced) to spend time including something (could take hours) just to make someone else's payday when they really did nothing for the One. I might look into it if there is a free version with One support. If not I may be creating bugs for the dev on an unsupported device
In other news, 11 Dec build is up. Enjoy, please leave comments!
poondog said:
Cheers
Sorry that was a typo lol
Yes you're right but this is how it has been done:
Since the voltage tables are different for all PVS versions, PVS 0 having the most voltage and 6 the least, 0 can handle -50mV compared to stock and still use more voltage and be stable, while still having more voltage than 6. Pushing 6 to more than what I have already done is risky since it is so low already, on a mass scale and I don't think I will do it unless it is proven stable
edit: https://github.com/poondog/kangaroo-m7-MKII/blob/exp/arch/arm/mach-msm/acpuclock-8064.c
...
Click to expand...
Click to collapse
Oh, yeah, you're right, I understand. I know of different voltages for different PVS, just didn't realized you did it that way. Thanks for clarification.
Cheers!
donmarkoni said:
Oh, yeah, you're right, I understand. I know of different voltages for different PVS, just didn't realized you did it that way. Thanks for clarification.
Cheers!
Click to expand...
Click to collapse
No problem! Enjoy the kernel
just trying it out
rohorubo said:
just trying it out
Click to expand...
Click to collapse
Winky face?
Hope you like it, its been a while in the making.. I thought of stuff for like 6 months and finally when sources were out for 3.62 it started
Been a development ongoing since then
Sent from my Nexus 7 using XDA Premium 4 mobile app
Nice to see u here
More awesome kernels for us!!
nice to see a kernel from down under any plans for a 4.4 kernel in the near future
Trying it out!
Sent from my HTC One using XDA Premium 4 mobile app
Woot! Trying and reporting it now!
Thanks for your work!
Sent from my Nexus 7 using Tapatalk
There will be a version for 4.4 GPe?
Inviato dal mio HTC One utilizzando Tapatalk
very smooth thx!
Sent from my HTC One using Tapatalk 2
I think I might make the trip back to 4.3 and give this a try. Thanks for sharing!
Sent from my HTC One using XDA Premium 4 mobile app
please post screenshots under trickster mod
Disclaimer:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* blah blah blah you get the point.
*/
1# post: Disclamer - special thanks
2# post: Current release & source
3# post: FAQ - bugs - future features
Donator List: (huge thanks for support)
here
Suggested kernel control app: trickstermod
I don't know if it works because i don't own the device but i have got ville which is pretty similar
[GUIDE]How to compile a kernel
Credits and Thanks:
dsixda, showp1984, ngtools, faux123, Christopher83, franciscofranco, msm8960 team, jrior001
Features:
Based on linux 3.4.99
Compiled with linaro toolchain 4.9.1 2014.07 optimized for cortex-a15
Linaro -O3 optimization
avaiable CPU governors: interactive, ondemand, performance, powersave, intellimand, intelliactive
avaiable GPU governors: ondemand, performance, simple
avaiable schedulers: row, deadline, noop, cfq, bfqv7r4, fiops, sio
Sleepy Plug
NTFS read & write support
exfat support
UTF8
Voltage control
Sweep2Wake
Double tap 2 wake
Pocket detection
Intelli-thermal
zRam with LZ4 compression
zCache with LZ4 compression
CPU OC to 1.7 GHz
GPU OC to 512MHz (3D) and 320MHZ (2D)
Faux sound control v. 3
Improved alghorithm: SHA1, AES, SQRT, lib/string (glibc version), lib/memcopy (glibc version), XOR (neon)
dynamic fsync by faux123
fastcharge
powersuspend driver (replace earlysuspend)
KCAL control (RGB)
heavly patched memory allocators, RWSEM and mutex (take a look at my github, too many changes to make a list here)
Changelog:
Code:
[JUL 26 2014]
Revert "prctl: adds the capable(CAP_SYS_NICE) check to PR_SET_TIMERSLACK_PID."
Revert "prctl: adds PR_SET_TIMERSLACK_PID for setting timer slack of"
add qseecom support
some defconfig changes
cpufreq: revert CAF's cpu policy save code
sched/cpuidle: reduce IPI storm. Backport upstream 3.16
mm, hugetlb: improve page-fault scalability
mm: per-thread vma caching
update compiler to linaro toolchain 4.9.1 2014.07 optimized for cortex-a15
update to 3.4.99
added KCAL control by faux and fixed by me
add F2FS support
Revert "msm: htc: update mem mapping"
[JUL 17 2014]
update to 3.4.98
sync with cm
sync with codeaurora/kk_2.7-stable
update sleepy_plug
bfq: BFQ-v7r5
bugfix from google (see github)
[JUN 29 2014]
Remove JustArchi GCC flags cos they are unstable
update to 3.4.95
sync with CM
sync with codeaurora/kk_2.7-stable
ext4: Speedup WB_SYNC_ALL pass called from sync(2)
[JUN 19 2014]
update compiler to linaro toolchain 4.9.1 2014.06 optimized for cortex-a15
update to 3.4.94
remove -fdata-sections GCC flag (cause of reboot issue)
sync with CM
sync with codeaurora/kk_2.7-stable
updated sleepy_plug
[JUN 09 2014]
sync with codeaurora/kk_2.7-stable
memset patch to fix bootloops
[JUN 08 2014]
3.4.92
reverted some KGSL CAF patches
removed -ftrace flag
sync with CM
improved int_sqrt algorithm
update bfq to v7-r4
[MAY 28 2014]
sync with codeaurora/kk_2.7-stable
update sleepy_plug
cpufreq: ondemand: Calculate load_at_max_freq based on current policy->max
sched: add do_avg_nr_running to fix avg_nr_running
[MAY 19 2014]
update to 3.4.91
merge codeaurora/kk_2.7_rb1.38
update bfq to v7-r3
sleepy_plug now supports quadcore CPUs
fix headset support (CM)
new GCC flags
update compiler
[MAY 03 2014]
block: support volname for HTC devices with proc/emmc support
[MAY 02 2014]
compiled with Linaro GCC 4.9.1 optimized for cortex-a15
sync with CM
update devices_htc from Jet jb 4.3 kernel
update headset driver from Jet jb 4.3 kernel
update memory mapping (more RAM avaiable)
update pn544 driver
update bma250 driver
OC to 1.7GHz
[APR 29 2014]
fix boot
update to 3.4.88
sync with codeaurora/kk_2.7-stable
some other CAF patches
max OC to 1.5 GHz
[APR 28 2014]
fixed boot (?)
[APR 24 2014]
first release
If you like my work please consider making a donation, I spend almost all my free time on making this kernel the best
i'll buy another phone to continue to support the android development!
Download:
androidfilehost folder: http://www.androidfilehost.com/?w=files&flid=14183
normalToQV: http://www.androidfilehost.com/?fid=23501681358544069
(if you don't see the new version just wait some minutes, it's uploading)
Kernel Source: Github
Q: What is QV version?
A: QV means "qualcomm voltages". qualcomm made a patch and stuck all voltages to 1150mv to improve stability. QV version has got all 1150 mv for each freq (like older 3.4 kernels).Q: I plugged in my pen drive but i can't found it
A: look in /mnt/usbdisk folder.Q: What's and how i enable/disable fastcharge?
A: with fast charge an USB charger will recognized as AC charger. it won't charge your phone faster with an AC charger. it may not charge your phone faster with an USB charger.
with the usb cable UNPLUGGED edit /sys/kernel/fast_charge/force_fast_charge:
0 -> disable
1 -> enable
than plug in the cableQ: i've got random reboots, what do you need?
A: first read here
write this info:
kernel version
ROM
governor
scheduler
undervolted? if yes don't undervolt
QV version? if no use it
last_kmsg
Q: what's BLN and how i enable/disable it?
with BLN on when you received a notify the soft key will blink.
to enable/disable edit /sys/class/leds/button-backlight/blink_buttons:
0 -> disable
1 -> enableQ: what's s2w and how i enable/disable it?
Sweep2wake allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep).
to enable/disable edit /sys/android_touch/sweep2wake:
0 -> disable
1 -> enableQ: what's dt2w and how i enable/disable it?
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the capacitive buttons.
to enable/disable edit /sys/android_touch/doubletap2wake:
0 -> disable
1 -> enableWhat's sleepy_plug and how can i activate/deactivate it?
sleepy plug it's an hotplug driver (it decide when turn on the second core) i wrote. it's an experimental driver and it may have got performance problem. if you notice some decrease in performance report it.
to enable/disable edit /sys/module/sleepy_plug/parameters/sleepy_plug_active:
0 -> disable
1 -> enableInstall instruction:S-OFF:
- flash the zip in recovery
- wipe caches (optional)S-ON:
Windows & Linux:
flash kernel zip.
stay in recovery after flashing the zip
from command prompt (ot terminal) on PC:
Code:
adb pull /tmp/newboot.img
adb reboot-bootloader
fastboot flash boot newboot.img
fastboot reboot
OLD S-ON INSTRUCTION:
Linux:
- flash awesome kernel cleaning script: http://d-h.st/HDi (optional)
- flash the zip in recovery (obsolete, for older kernels with modules outside built outside)
- use zImage switcher to make a new boot.img
-
Code:
fastboot flash boot newBoot.img
Windows: (don't ask me how it works or everything else, i don't know and they have got tutorials on their site)
- repack your ROM boot.img with mine zImage using Virtuous Ten Studio http://www.virtuous-ten-studio.com/index.php/downloads
-
Code:
fastboot flash boot newBoot.img
Bugs 3.4:
None
If you want to use my kernel for your ROM just use it and cit me in credits
Great thread and great work. I will be flashing this tonight over a fresh install of snapshot M5 CM11! I'll let you know how it runs, hopefully smooth as butter. Thanks again
rmbq said:
Disclaimer:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* blah blah blah you get the point.
*/
1# post: Disclamer - special thanks
2# post: Current release & source
3# post: FAQ - bugs - future features
Donator List: (huge thanks for support)
here
Suggested kernel control app: trickstermod
I don't know if it works because i don't own the device but i have got ville which is pretty similar
[GUIDE]How to compile a kernel
Credits and Thanks:
dsixda, showp1984, ngtools, faux123, Christopher83, franciscofranco, msm8960 team, jrior001
Click to expand...
Click to collapse
Can you compile a 4.1.2 SENSE5 kernel? all working
Don't care about my awkward English
zhaotiantian said:
Can you compile a 4.1.2 SENSE5 kernel? all working
Don't care about my awkward English
Click to expand...
Click to collapse
I don't work on sense
Inviato dal mio One S utilizzando Tapatalk
looks great.. just flashed CV on new cm11 nightly.. bootloops htc screen
Non QV bootloops on HTC Quietly Brilliant screen. CM 11 4/14 nightly. I'll try the QV another day.
I think I used wrong voltages for you, freq it's 1.5 GHz instead 1.2. I'll make another version asap
I'm running CM11 snapshot M5, I'm not sure which version to flash. Thanks for the work!
Sent from my Incredible 4G LTE using Tapatalk
try the new version!
still no boot for me, tried new non-qv..
and this one? http://www.androidfilehost.com/?fid=23329332407590054
^^ there we go! that one works so far so good.. only thing i noticed is max cpu option is still 1728, i don't think this phone can go above 1512, but i may be wrong?
edit: also, trying to disable the button backlight is buggy. the 3 lights will still blink intermittently..
itrx said:
^^ there we go! that one works so far so good.. only thing i noticed is max cpu option is still 1728, i don't think this phone can go above 1512, but i may be wrong?
Click to expand...
Click to collapse
officially only 1242MHz even ... but it runs fine at the usual (slight) OC 1458MHz or 1512 ... but also 1674 is fine ... just consumes more battery and gets hotter. even up to 1809MHz should be stable for most, but that is way to hot and batt-sucking imho!
official booting version is up, i limited OC to 1.5, 1.7 is too much xD
rmbq said:
official booting version is up, i limited OC to 1.5, 1.7 is too much xD
Click to expand...
Click to collapse
for reference our/my: on the Infernal / Infernal-K99 (ICS-Sense custom kernel) ... 1512 / 1458 was set as the std max CPU freq, but we allowed up to 1809 on Infernal (which I admit is rather really high xD) ... and 1674 max OC on Infernal-K99 => the max OC of 1674 is usually auto-selected for the 2nd-core on demand whereas the 1st core admits to whatever limit is set (thus usually 1458)
no real heat probs at all since months with that setting ... 1809 tended to get rather hot (e.g. on reboots) ... not so with 1674 (and a not too high voltage as set in std)
oh, and limiting the "OC" to 1512 isn't really an OC limit ... as that was std for the MSM8960 on almost all devices! (just fireball got an artificial limit of 1242 to further improve on batt runtime). so from that point of view, only everything _above_ 1458/1512 should be considered OC.
just my 2c
PS: apart from that, thanks for working on fireball AT ALL ... there aren't many devs left here unfortunately
on a note: please also enable 192MHz as the lowest CPU freq while you are at it ... never heard any complaints about it for our custom-kernels ... _and_ it greatly improves on total runtime, if 192MHz as lowest for CPU is set ... instead of the regular 384MHz only
cheers,
kimba99
Kernel is pretty smooth and getting great battery life, thank you indeed! I'd agree with adding 192Mhz as well.
kimba99 said:
for reference our/my: on the Infernal / Infernal-K99 (ICS-Sense custom kernel) ... 1512 / 1458 was set as the std max CPU freq, but we allowed up to 1809 on Infernal (which I admit is rather really high xD) ... and 1674 max OC on Infernal-K99 => the max OC of 1674 is usually auto-selected for the 2nd-core on demand whereas the 1st core admits to whatever limit is set (thus usually 1458)
no real heat probs at all since months with that setting ... 1809 tended to get rather hot (e.g. on reboots) ... not so with 1674 (and a not too high voltage as set in std)
oh, and limiting the "OC" to 1512 isn't really an OC limit ... as that was std for the MSM8960 on almost all devices! (just fireball got an artificial limit of 1242 to further improve on batt runtime). so from that point of view, only everything _above_ 1458/1512 should be considered OC.
just my 2c
PS: apart from that, thanks for working on fireball AT ALL ... there aren't many devs left here unfortunately
on a note: please also enable 192MHz as the lowest CPU freq while you are at it ... never heard any complaints about it for our custom-kernels ... _and_ it greatly improves on total runtime, if 192MHz as lowest for CPU is set ... instead of the regular 384MHz only
cheers,
kimba99
Click to expand...
Click to collapse
about OC ok, i didn't know your device can handle 1.7 GHz and i'll enable it again in next version.
about 192MHz i don't know if i ever will enable it
rmbq said:
about 192MHz i don't know if i ever will enable it
Click to expand...
Click to collapse
About over/down clock/voltage CPU & GPU, please check this post:
http://forum.xda-developers.com/showthread.php?t=2217285?&p=51891887
BRAVEKERNEL
So here we go, this is the thread of a customized kernel for KitKat ROMs (CM11, AOSX, SlimKat...) with some extra features added.
Feedback is welcome and highly valuable
Main features are these:
- Kernel 3.0.101
- Kernel based on munjeni's source code modified by AOSX team
- TWRP 2.7
- Fixed ADB and mount USB in recovery
- Built with custom Linaro 4.9.1-2014.04 toolchain optimized for Cortex-A9
- Built with -O3 optimization flags
- 394MB of usable RAM
- Included elf.3 to save some battery
- Init.d support
- Added 600MHz mode
- Battery Life eXtender support
- Lowered swappiness (60 -> 45)
- Removed old SHA1 routine
- Added optimized CRC32 algorithm
- SLUB memory allocator
- Optimized ARM RWSEM (read/write semaphore) algorithm
- Optimized asynchronous I/O latency
- Updated topology with lastest changes
- Fast Random generator (frandom) support
- Dynamic FSync control
- Dynamic management of dirty page writebacks
- VM tweaks for performance
- Revised LowMemoryKiller parameters for better performance
- LowMemoryKiller management of not killable processes
- Additional TCP Congestion algorithms
- Boosted WiFi speed
Available CPU governors:
- AbyssPlug
- Conservative
- Dynamic Interactive
- Fantasy
- HotPlug
- IntelliDemand
- Interactive
- LionHeart (default)
- LulzActiveQ
- LulzActiveW
- MinMax
- Nightmare
- OnDemand
- OnDemandAX
- OnDemandQ
- PegasusQ
- PegasusQPlus
- Performance
- Powersave
- SakurActive
- SmartAssV2
- Userspace
- Wheatley
- ZZMoove
Available I/O schedulers:
- BFQ
- CFQ
- Deadline
- Noop
- ROW
- SIO
- SIOplus (default)
- V(R)
- Zen
Kernel Downloads for KitKat:
BraveKernel KK-4.4 Mediafire Folder
- v1.3 -
for CM 11.0, AOSX & SlimKat
How to install the kernel:
1) Download the kernel zip file to SD card
2) Reboot to recovery
3) Flash the kernel zip file
4) Wipe cache and dalvik cache if you are coming from another kernel
5) Reboot the system
Performance Control APP
App for tweaking performance options, enabling features like management of not killable processes, adjusting CPU frequency, etc.
Kernel sources (on GitHub):
Development repository of BraveKernel 3.0.101 for KK 4.4
Kernel known problems:
- You tell me
Changelog:
Code:
[B]08/06/2014 - BraveKernel 3.0.101 v1.3 for KitKat[/B]
- defconfig: Add F2FS support
- mali: Add utilization sampling rate parameter
- mali: Fix L2 cache reads when delete cache cores
- cpufreq: Add debug mask
- abb-regu: Add VOTG sysfs interface
- cpufreq: Add LulzactiveW governor
- cpufreq: Update LulzactiveW governor
- abb-regulator: Add Varm HW mode option
- ux500_pcm: Revert max PCM periods bytes tweaks
- cpufreq/ondemand: Replug CPU1 when governor starts
- cpufreq/performance: Replug CPU1 when governor starts
- cpufreq/interactive: Replug CPU1 when governor starts
- mali: Pre-allocated max memory size writable
- arm/topology: Remove topology updates
- drivers/mmc: SPI CRC configurable
- mm/slub: Revert driver
- snd_usb: Fix sysfs conflicts
- mm/slub: Make default max order 0
- mali: Reset default L2 max reads
- mm: Tweak sysctl params
- abb-sysctrl: Allow to force power off
- audio: Fix for choppy playback in Ubuntu pulse audio
- bcmdhd: Add PM_FAST control param
- mmc/core: Fix permission of 'use_spi_crc'
- block: Update ROW I/O scheduler
- ARM: decompressor: Enable unaligned memory access for v6 and above
- lib/lzo: Update LZO compression to current upstream version
- block/sio: Modify parameters
- logger: Add an enable toggle for entry storage
- Makefile: Add unaligned access flag
- lib/lzo: Huge LZO decompression speedup on ARM by using unaligned access
- block: Limit default readahead size for small devices
- ondemand: Decrease up threshold 95 -> 75
- interactive: Sync with android-kernel-common-3.0
- lib/lzo: Optimize code for CPUs with inefficient unaligned access
- cpufreq: Add InteractiveQ governor
- cpufreq: InteractiveQ: Fix dead wakeup
- block: Fix auto readahead size
- slub: Update
- mali: Adjust OSK memory allocation order 9 -> 8
- mali: Utilization sampling rate 1000ms -> 500ms
- block: Update bfq iosched v5r1 -> v7r2
- block: Switch from BFQ-v7r2 for 3.0.0 to BFQ-v7r3 for 3.0.0
- ext4: Speed up truncate/unlink by not using bforget() unless needed
- deadline: Allow 0ms deadline latency, increase the read speed
- lib/checksum.c: Optimize do_csum a bit
- cfg80211: Fix memory leak
- readahead: Make context readahead more conservative
- lib/int_sqrt.c: Optimize square root algorithm
- fs/dcache: vfs_cache_pressure -> 133
- cpufreq: Add ZZMoove governor
- cpufreq: Remove double LulzactiveQ
- cpufreq: Remove double PegasusQ
- cpufreq: Remove InteractivePlus governor
- arm/lib: Remove ARM sha1 routines
- mali: Update
- mali: Back to 1C
- mm, vmalloc: Use well-defined find_last_bit() func
- mm, vmalloc: Remove useless variable in vmap_block
- net: loopback: Set default mtu to 64K
- kernel/timer: Optimize apply_slack() for size and speed.
- binfmt_elf.c: Use get_random_int() to fix entropy depleting
- arm: topology: Enable arch power
- ARM: 7668/1: Fix memset-related crashes
- ARM: 7670/1: Fix the memset fix
- irq: Set CPU affinity right on thread creation
- softirq: Reduce latencies
- fs/super.c: Sync ro remount after blocking writers
- ksm: Provide support to use deferred timers for scanner thread
- ksm: Enable deferred timer
- dbx500-cpufreq: Added missing 600MHz mode
- page_alloc: min_free_kbytes -> 8192
- page_alloc: extra_free_kbytes -> 1024
- vmscan: swappiness -> 45
- futex: Prevent attaching to kernel threads
- futex: Add another early deadlock detection check
- futex-prevent-requeue-pi-on-same-futex.patch futex
- futex: Validate atomic acquisition in futex_lock_pi_atomic()
- futex: Always cleanup owner tid in unlock_pi
- futex: Make lookup_pi_state more robust
- defconfig: Panic timeout -> 0
- defconfig: Enable KSM check page
- fs/sync: Switch do_fsync() to fget_light()
- fs/dyn_sync_cntrl: Fix dynamic sync control
- fs/dyn_fsync: Check dyn fsync control's active prior to performing fsync ops
- dynamic filesync: Add some cache optimizations
- dynamic fsync: Favor true case since most will be using this feature
- dynamic fsync: Don't disable fdatasync()
- fs/sync: Make sync() satisfy many requests with one invocation
- mm/page_alloc: Avoid page allocation failure
- defconfig: Update kumquat configuration
- ramdisk: Add F2FS tools
- ramdisk: Remove unnecessary tweaks
- cmdline: Usable RAM -> 394MB
[B]25/05/2014 - BraveKernel 3.0.101 v1.2 for KitKat[/B]
- Makefile: Added -O3 optimization
- cpufreq/ondemand: Add CPU idle detection
- sched: Add a symbol for governors
- arch/arm/Makefile: Build with -pipe
- zImage compressed with XZ
- cpufreq: Add OnDemandQ governor
- mali: Fix arch links
- mali: L2 cache default max reads
- mali: L2 max reads parameters writable
- mali: Disable state tracking
- mali: Increase utilization sampling rate
- mali: Add utilization parameters
- cpufreq/interactive: Synced with 3.4 kernel
- mali: Add PM sleep sampling rate parameter
- arm/crypto: Add optimized AES and SHA1 routines
- mach-ux500: Add PRCMU clock sysfs module
- abb-codec: Add missing bits
- n_tty: Fix n_tty_write crash when echoing in raw mode
- net: Fix "ip rule delete table 256"
- Fix false disconnect due to a signal sent to the reading process
- SELinux: Fix kernel BUG on empty security contexts
- SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()
- block: Add SIO Plus I/O scheduler
- mutex: Dynamically disable mutex spinning at high load
- kernel: Disabled Gentle Fair Sleepers for better performance
- random: Entropy tweaks
- random: Decrease read/write wakeup threshold
- block/sioplus: Fluid tunables
- block/sioplus: Tweaks
- block/sioplus: Allow 0ms deadline latency, increase the read speed
- block/sioplus: sync_read_expire = 312.5ms, writes_starved = 2
- mm: Optimized SLUB memory allocator
- Makefile: Added optimized flags
- ksm: Check and skip page, if it is already scanned
- Enabled KSM by default
- arch/arm: Makefile: Added flags for U8500
- cpufreq: Removed ZZMoove governor
- defconfig: Updated kumquat configuration
- ramdisk: CM11, AOSX and SlimKat versions unified
- ramdisk: Add CM performance profiles support
[B]16/05/2014 - BraveKernel 3.0.101 v1.1 for KitKat[/B]
- Fixed lag in every KitKat ROM
- Removed 600MHz mode (maybe it will be added again in following versions)
- Downgraded LMK to 3.0.101 in order to fix bugs
[B]11/05/2014 - BraveKernel 3.0.101 v1.0.1 for KitKat[/B]
- Updated modules in order to get WiFi working
[B]11/05/2014 - BraveKernel 3.0.101 v1.0 for KitKat[/B]
- Initial release
Credits and thanks to:
munjeni and AOSX team for their awesome work and their kernel sources
AGONTUK for TWRP 2.7.0 recovery
Christopher83, Ezekeel, Faux123, cocafe and other developers I'm surely missing
CyanogenMod, Kernel.org, Sony, Google, Linaro GCC developers
Info4Geek and evildev for his support in testing
NOTE:
In DevDB info it says this kernel it's for Xperia Sola, but it's just an error of DevDB system, it's only for Xperia U
XDA:DevDB Information
BraveKernel, Kernel for the Sony Xperia Sola
Contributors
Garcia98
Kernel Special Features: Customized kernel 3.0.101 for KK 4.4 ROM
Version Information
Status: Beta
Current Beta Version: v1.3
Beta Release Date: 2014-06-08
Created 2014-05-11
Last Updated 2014-11-09
Reserved
Congratulations!
As I am on SlimKat currently, I will surely try this out.
Feature request:
How about collaborating with @AGONTUK in order to patch this kernel with illumination fixes? I used his patch on AOSX, and it works perfectly, but some changes are needed to boot.img for illumination patch to fully work, so I believe that his patch is useless with roms other than AOSX.
Keep up the good work!
WiFi
I tried this kernel, but now my wifi wont turn on...(AOSX)
pedromms86 said:
I tried this kernel, but now my wifi wont turn on...(AOSX)
Click to expand...
Click to collapse
I guess it's because it's only for CM11 based Roms:
Inviato dal mio ST25i utilizzando Tapatalk
I've been waiting for this for a long time. Will try it soon.
Sent from my Xperia U using Tapatalk
New version!
Hi!
I've released v1.0.1 which has updated modules, needed to get WiFi working, sorry for the inconveniences
Here is the link: http://www.mediafire.com/download/2bvmd7aizzazs7b/BraveKernel_v1.0.1.zip
evildev said:
Congratulations!
As I am on SlimKat currently, I will surely try this out.
Feature request:
How about collaborating with @AGONTUK in order to patch this kernel with illumination fixes? I used his patch on AOSX, and it works perfectly, but some changes are needed to boot.img for illumination patch to fully work, so I believe that his patch is useless with roms other than AOSX.
Keep up the good work!
Click to expand...
Click to collapse
Well, illumination fix goes mainly in ROM side, not in kernel side, but for next release I will make needed changes at ramdisk in order to get illumination service working (if avalaible in ROM side), thank you
pedromms86 said:
I tried this kernel, but now my wifi wont turn on...(AOSX)
Click to expand...
Click to collapse
Yes, sorry for the inconveniences, try new version, WiFi should work fine
ilysomma said:
I guess it's because it's only for CM11 based Roms:
Inviato dal mio ST25i utilizzando Tapatalk
Click to expand...
Click to collapse
I only tested it on CM11, but it should work on other KitKat ROMs
Will test very soon ^^
Sent from my Xperia U using XDA Premium 4 mobile app
---------- Post added at 11:48 PM ---------- Previous post was at 11:17 PM ----------
Works on AOSX but the system is too laggy, I uninstall :/
Sent from my Xperia U using XDA Premium 4 mobile app
To change governor and I/O, do I need to install an external app from play? Since in setttings I cannot do that... (AOSX).
Sony26 said:
To change governor and I/O, do I need to install an external app from play? Since in setttings I cannot do that... (AOSX).
Click to expand...
Click to collapse
Yep...download no frills cpu control
Inviato dal mio ST25i utilizzando Tapatalk
How to activate these features in your kernel? Like frandom and other stuff. Or are they already active?
Sent from my Xperia U using Tapatalk
Awesome kernel!
Can you please make kernel for Stock JB having Munjeni's latest 6.3 recovery and having all of these tweaks? It'd be really awesome if you do! Thank you!
i hope someone does it i am still officially using 4.1.2
AD9295 said:
Awesome kernel!
Can you please make kernel for Stock JB having Munjeni's latest 6.3 recovery and having all of these tweaks? It'd be really awesome if you do! Thank you!
Click to expand...
Click to collapse
:good:
Angristan said:
Will test very soon ^^
Sent from my Xperia U using XDA Premium 4 mobile app
---------- Post added at 11:48 PM ---------- Previous post was at 11:17 PM ----------
Works on AOSX but the system is too laggy, I uninstall :/
Sent from my Xperia U using XDA Premium 4 mobile app
Click to expand...
Click to collapse
OK, don't install it on AOSX by now, I'll release a different version for AOSX, stay tuned!
Sony26 said:
To change governor and I/O, do I need to install an external app from play? Since in setttings I cannot do that... (AOSX).
Click to expand...
Click to collapse
I recommend you to use Performance Control App :good:
Vtrendzzy said:
How to activate these features in your kernel? Like frandom and other stuff. Or are they already active?
Sent from my Xperia U using Tapatalk
Click to expand...
Click to collapse
Frandom is already active, but I'll publish a guide about how to enable/disable features, until that you can use Performance Control App to enable Batery Life eXtender, Dynamic FSync, Dynamic management of dirty page writebacks and to control the management of not killable processes
AD9295 said:
Awesome kernel!
Can you please make kernel for Stock JB having Munjeni's latest 6.3 recovery and having all of these tweaks? It'd be really awesome if you do! Thank you!
Click to expand...
Click to collapse
Not by now, I want to get it working flawlessly in the main ROMs for KitKat
I am using it on aosx and its not laggy.
But I dont find the app that you recommend on play, could you give me a link ?
p.s. I noticed with CPU Frills that min freq is 1000 ! Is that a "bug" of this kernel ? Anyway I changed it succesfully to 200.
Sony26 said:
I am using it on aosx and its not laggy.
But I dont find the app that you recommend on play, could you give me a link ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2444376
@sv2hqx: Thank you very much, I'll install it right now. I'm wondering why its not avaible on google play...
I try this on Build 4 of CM11 from Xperia-STE but my phone is soooooo lagggyyyy. I try change governoor and nothing.
AOSX
instaled in AOSX (personal build, thanks to @Info4Geek) and phone its too laggy, hangs a lot, even with performance as a governor, for now its not good for aosx users...will wait for aosx version
thanks dev
dasti555 said:
I try this on Build 4 of CM11 from Xperia-STE but my phone is soooooo lagggyyyy. I try change governoor and nothing.
Click to expand...
Click to collapse
What?!
Strange, can you upload dmesg and logcat, please?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Emotion nightly Kernel Note 4 -SM-N910V
Developed by Placiano and Pafcholini
Introduction
Introducing the Emotion Revolution Roms & Kernels for Android Devices.
Emotion Rom/Kernel is a modified, aftermarket firmware/Kernel distribution few Android devices (Note 2, Note 4, HTC M7, Newman N2). Based on the Android Open Source Project , Emotion Rom & Kernel is intended to increase performance and stability over Android-based Devices released by sellers, for example, Samsung, HTC and so forth. Emotroid additionally offers a mixed bag of features & improvements that are not presently found in stock variants of Android.
*** Disclamer***
Your warranty is now void.
We are not responsible for any damage or problems you may have!
YOU are choosing to make these modifications.
Click to expand...
Click to collapse
Thread IndeX
POST 1: Kernel Information, Changelog, Credits,Screenshots
POST 2: Synapse, Recommended settings, FAQ, etc.
POST 3: Know/Reported issues
Request new features here
Features:
Based on Samsung Open Source XXU1BOB4
Compiled with Toolchain Linaro GCC 4.9.3 2015.02 Cortex A15
Linux version 3.10.40
OC/UC -> 3072MHz / 268MHz
PowerSuspend Driver
Intelli-Plug V4.0
KSM enabled
Sweep2wake
Simple GPU Algorithm
Voltage Control
Intelli-Thermal
KCAL - Advanced color control
Led Control
CRC Settings
Advanced TCP control
S-View flip cover hack
Selinux Permissive
Sched: LOAD_FREQ (4*HZ+61)
Reduced wakelocks
Frandom number generator
Synapse full support
Governors: interactive_pro, intelliactive, bluactive, conservativex, alucard,darkness, nightmare, smartassV2, ondemandplus, umbrella_core, yankactive, dancedance, bioshock, lionhearth, conservative, interactive, ondemand,powersave, userspace, performance
I/O Scheldures: bfq, vr, fiops, zen, fifo, sio, test-ioshed, cfq, row, deadline, noop
Click to expand...
Click to collapse
April- 14 -2015 nightly r9
-Back to Linux 3.10.40 (For now, we are working to bring stable 3.10.73)
-Added Intelli-thermal v3.0
-bcmdhd4358: filter multicast packages while suspended
-fs/namei.c: fix potential memory leak in path_lookupat
-pinctrl: msm: fixed potential NULL pointer dereference
-usb: ks_bridge: by default debugging is disabled
-slub: fix kmem_cache_shrink return value
-mm: slub: fixed format mismatches in slab_err() callers
-power:Enable/Disable power collapse after camera open
-Implemented CPU Core Control by andip71
-tick: don't update idle time if cpu offline
-msm: kgsl: Only wake GPU on multitouch events
-Interactive: don't boost cpu if already boosted
-rtc: qpnp-rtc: Sets RTC time correctly
-rtc: qpnp-rtc: Set alarm control register properly
-Added Mobile Storage Analyzer
-soc: mbhc: Fix ID Tech card reader detection
-power: catch wake-up requests in suspend_again
-pinctrl: msm: prevent bogus wake up from suspend
-asoc: wcd9xxx: Improved headset detection
-Implemented Motorola MSM memcpy enhancements "memutils" (Faster memcpy performance for Krait)
-Improved Memutils
-Added CIFS as module
-Adde NTFS as module
-ASoC: msm: qdp6v2: handle proxy read failure
-ASoC: msm: qdsp6v2: Fix timestamp query during gapless transition
-mmc: core: Update PON (Power Off Notification) based on the system state
-mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
-netfilter: IDLETIMER: fix invalid deference of timer
-Fixes and improvements in Synapse
-Added CPU Binning (pvs information) Synapse> CPU VOLTAGE
-Added CPU core control in Synapse> CPU DRIVERS
-For more info check our Github
March- 27 -2015 nightly r8
-Linux update to 3.10.71
-Powesuspend updated to 1.7
-Intelli-plug updated to 4.0
-OC/UC -> 3072MHz / 268MHz
-Added Hardlimit Control
-Added new governors
-Addeded new scheldures
-Added memcopy & string use glibc version
-Added quickwakeup driver (improve battery life)
-Optimized Kernel Samepage Merging (KSM)
-deadline: Optimized for non-rotational
-mm: Clear page active before releasing pages
-ARM: 8119/1: crypto: sha1: add ARM NEON implementation
-ARM: 8120/1: crypto: sha512: add ARM NEON implementation
-ARM: crypto: add NEON accelerated XOR implementation
-ARM: add support for kernel mode NEON and only allow kernel mode neon with AEABI
-Fixed failure to enter PS mode while roaming
-Sched: Set MC (multi-core) sched domain's busy_factor attribute to 1
-Disabled add_random for more performance on SSD's
-tcp: enabled tcp fast open functionality (franciscofranco)
-For more info check our Github
March- 5 -2015 nightly r7
-Added KCAL - Advanced color control (Thanks to @savoca for his great job) check this thread for more info
March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Based on XXU1BOB4 (Lollipop version) and compatible with "F"
-Lollipop version has all the features except mdnie control and S-View hack
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes
January- 27 -2015 nightly beta r5
-FauxSound implemented
-FauxSound in Synapse
-Added high performance mode in Synapse->Sound
-Fixed battery drain on wifi (My fault)
-Reverted another commits
January- 16 -2015 nightly r4
-Fixed cpu voltage control (No more 0MHz frequency in cpu voltage table)
-ASoC: wcd9xxx: use hwdep node for codec calibration
-ASoC: wcd9320: use hwdep nodes to get calibration
-ASoC: wcd9xxx: Changes for High performance mode
-ASoC: wcd9xxx: Change PA on and VDDIO switch sequence
-ASoC: wcd9xxx: Avoid micbias glitches during audio playback
-In conclusion better quality sound on headsets
-Sched/fair: reduced latency
-Decreased DHD_PACKET_TIMEOUT_MS to 250 ms (Before 500ms)
-Drecreased time to enter sleep
-Net: wireless: Increased scan entry expiration to fit new scan time
-PM: devfreq: Use high priority workqueue
-Msm: kgsl: Report correct GPU frequency in sysfs
-Some minor changes
January- 11 -2015 nightly r3
-Added Frandom as module and set by default (Synapse>I/O>Frandom) "For more info check this"
-Network speed tweak
-Reduced wakelocks "wlan_rx_wake" and "wlan_ctrl_wake"
-dtsi: realigned voltages with userspace values (Thanks to twistedumbrella)
-cpu-boost more performance (Thanks to franciscofranco)
-sched: LOAD_FREQ (4*HZ+61) "For more info check this"
-Interactive governor imported from the Nexus 6 (No more lag on interactive)
-Added bluactive and interactive_pro governors
-Reverted some changes that made the kernel laggy in some cases.
-Selinux set to permissive by default
-Gpu: msm: for higher priority you want to use nice level of -7
-Now you can change the governor tunables from Synapse (Issue fixed) (Thanks for the tip to AndreiLux)
-Synapse shows all the available gpu governors (Thanks to my friend Friedrich!)
-Cleaned some things in Synapse
-Other minor changes
January- 4 -2015 nightly r2
-Fixed Ondemand governor
-mm: slub: Default slub_max_order to 0 (Improved performance)
-Increased io performance
-writeback: fix occasional slow sync
-Fixed min frequency (Finally!)
-msm: Fix high load average from uninterruptible waits
-Cpu boost sysfs to enable/disable it (Synapse>cpu drivers)
-S-View hack (Twistedumbrella) enable/disable (Synapse>miscellaneous)
-Minor fixes
January- 1 -2015 nightly r1
-Based on Samsung Open Source N910FXXU1ANIE
-Compiled with Toolchain Linaro GCC 4.9.3 2014.12 Cortex A15
-PowerSuspend Driver
-Intelli-Plug V3.9
-Stereo Call Recording Support
-cpufreq_limit: don't override cpu min frequency
-Fast Charge V1.2
-Sweep2wake
-Simple GPU Algorithm
-Sysfs interface to Enable/Disable Logger Android (Default disable)
-Voltage Control
-Intelli-Thermal V1
-mDNIe Hijack control
-Advanced TCP control (westwood default)
-Sysfs interface to Enable/Disable CRC
-Dynamic Fsync Control V1.5
-Added Intelliactive, Smartmax and SmartassV2 governors
-Led Control
-Panel Color Control
-mDnie mode adapter for Synapse
-Selinux Enforcing/Permissive
-Synapse Support
Click to expand...
Click to collapse
Installation instructions
You need to have TWPR, CWM o Philz Recovery.
Download the last kernel
Reboot in recovery mode
Make backup (recommended)
Flash the zip
Downloads
Strictly No Mirrors Please. In the event that you need to make one ask us first with purpose behind what valid reason.
Current Version
After flash the kernel (LL version) go to play store and download Synapse apk.
App to control your display : Color Control
Emotion nightly r9 LL (Mediafire)
Old version
Emotion nightly r8 LL (Mediafire)
Nadia nightly r7 LL (Mediafire)
Nadia nightly r7 KK (Mediafire)
Nadia nightly r6 LL (Mediafire)
Nadia nightly r6 KK (MEGA)
Nadia nightly beta r5 (Mediafire)
Nadia nightly r3 (Mediafire)
Nadia nightly r4 (MEGA)
Nadia nightly r4 (AndroidFileHost)
Nadia nightly r3 (Mediafire)
Nadia nightly r3 (MEGA)
Nadia nightly r3 (AndroidFileHost)
Nadia nightly r2 (Mediafire)
Nadia nightly r2 (MEGA)
Nadia nightly r2 (AndroidFileHost)
Nadia nightly r1 (Mediafire)
Nadia nightly r1 (MEGA)
Nadia nightly r1 (AndroidFileHost)
Click to expand...
Click to collapse
Source code:
Emotion kernel Github
Thanks To/Credits
Andip71, AndreiLux, apb_axel, Civato, Christopher83, DerTeufel, Faux123, Ffolkes, Flar2, Franciscofranco, Franlov, Friedrich420, Gokhanmoral, Infernum, LoungeKatt (TwistedUmbrella), savoca, _Sofos_, Vanito, Yank555.lu, ZaneZam.
I hope I have not forgotten anyone!
Hit the "thanks" button if you like our work.
You can follow new updates here (Spanish)
Recommended settings & FAQ Synapse and all available options:
- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: cpu scaling, cpu governor and governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling min/max frequency, GPU governor, Simple GPU Algorithm.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead, Frandom Module, Scheldure Tunables Internal/External
- CPU DRIVERS: PowerSuspend and Intelli-Plug
- THERMAL: Intelli-Thermal Control
- MISCELLANEOUS: Dynamic FSYNC Driver, Logger Mode, CRC Settings, S-View bypass, Selinux Status, Optimize Database.
- BATTERY: Live Statistics and Fast Charge
- MDNIE/SCREEN: Panel Control, mDNIe Mode and mDNIe Mode Hijack
- LED: Led Control
- SCREEN WAKE CONTROL: Sweep2Wake Control
- KERNEL TWEAKS: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BUILD.PROP: Build.prop Tweaks
- LOGS: Clearn Synapse, Logcat and Dmseg
- INFO-REBOOT: info about the kernel, reboots,etc.
Click to expand...
Click to collapse
Balance between performance and battery
Quote:
Above is what I use personally. MAY NOT be optimal for all. Share your settings.
CPU frequency: 2649MHz/300MHz
CPU governor: Intelliactive or Bluactive for performance/ Interactive for battery
CPU voltaje: -25uV ((Be careful!! If you low voltages much you can get bootloop or battery drain.)
GPU: default values
I/O schedulers: row for both
PowerSuspend: hybrid hook
MPDECISION for performance/ Intelli-Plug for battery
Intelli-Thermal: enabled
MISCELLANEOUS: fsync enabled, logger mode disabled, crc disabled (you choice), Selinux Permissive
TCP: westwood for both
Click to expand...
Click to collapse
Aukhan recommended settings
1.
2.
F.A.Q
Can I flash this kernel on Note 4 SM-N910C or other variant?
No, you can not. This kernel is only for SM-N910F, SM-N910G, SM-N910T and SM-N910W8.
When I switch to Ondemand governor I noticed that cpu-boost is disabled.
Exactly, Ondemand and cpu-boost doesn't work well together. When you switch to Ondemand governor cpu-boost will be disabled automatically. Don't re-enable cpu-boost if you are using Ondemand governor. (Synapse>CPU DRIVERS)
Which app can control this kernel?
By default, the kernel is controlled by Synapse, but you can use the app that you like (Trickster Mod, Kernel Tweaker, etc.).
I flashed the kernel and Synapse says: "No support UCI detected".
Reflash the kernel, since it was a bad installation and Synapse does not detect the scripts.
After flashing the kernel lost root what to do?
In case you loose root just flash SuperSU
Any recommended settings to follow using Synapse?
At the beginning of the second post.
After flash the kernel some apks give me FC.
Go to Google Play Store and reinstall those apks.
From where can I remove int.d script?
Go to /system/etc/init.d using any root based file manager and delete.
Note: There is an important one related to superSU and if you remove it by mistake you're gonna have trouble with root permissions.
My device doesn't show any reaction to undervolting (battery life is same as before) or gets unstable even on light undervolting?
Use DVFS disabler Module(standalone) (dynamic voltage and frequency scaling), this feature was kept in touchwiz for benchmark boosting purposes and will conflict with any undervolting and custom governors because it scales the voltages and frequency on regular intervals and is framework integrated, so gets a higher priority than kernel based voltage and scaling controls.
For people who don't know what is DVFS please refer Wikipedia.
Min/Max frequency don't stick?
If your frequency settings don’t stick, it's because on certain Qualcomm devices, there are certain system services (thermald/mpdecision/project butter) or kernel service that rewrite frequency settings based on current thermal status and/or touch input.
I made a logcat but my file is empty. How I can "fix" it?
By default Android logger is disable. Go to Synapse > MISCELLANEOUS and enable Logger Mode.
What is it PowerSuspend?
This new powersuspend PM kernel driver is a replacement for it and existing early_suspend drivers. It should give better battery life.
What is it Intelli-Plug?
Intelliplug is a replacement for mp decision. Intelli-Plug is Faux123 open source solution to Qualcomm's closed source mpdecision. Intelli-Plug is disable by default. It conflicts with mpdecsion, so is HIGHLY recommend turning off mpdecision when using intelli-plug! (If you use Synapse the change is automatic. If you enable Intelli-plug mpdecision will turn off).
What is it Intelli-Thermal?
an intelligent MSM thermal throttling kernel driver designed to replace the
closed sourced thermald(aemon) from Qualcomm.
What is it Frandom?
Frandom is a kernel random number generator, which is 10-50 times faster than what you get from /dev/urandom. And it uses very little (/dev/frandom) or none (/dev/erandom) of the kernel's entropy pool, so it is very useful for applications that require a handy source for lots of random data.
What is it CRC?
CRC is a mechanism aiming to prevent data corruption when is enabled (reduce the performance around 30%). So if you disable it improve the performance but your data can be corrupted. Use it at your risk.
/sys/module/mmc_core/parameters/crc
Know/Reported/Fixed issues Know issues
1. Synapse doesn't show CPU governor tunables.
I'm trying to fix it. FIXED
2. Sometimes Synapse (and others kernel control apks) show that the min frequency is 1190MHz (or other frequency).
Just cancel it. FIXED
3. Ondemand doesn't work well. FIXED
Thanks for the report @Vangelis13
Any other Issues you may Report us and we will fix it
Reserverd
Currently its confirmed that its runing fine on Developer Edition by @manbat thanks to him.
If anybody else has tried it on a non developer Edition please let us know since we do not have a V Variant Device We wont be able to test.
Kindly report.
First! Sweet my first...first.lol
Have been running for a few days on my DE...runs great !!!
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
manbat said:
Have been running for a few days on my DE...runs great !!!
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
Click to expand...
Click to collapse
Glad to know it's running rock solid.
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
JDevil said:
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
Click to expand...
Click to collapse
=======
No issues with LEDs here....
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
JDevil said:
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
Click to expand...
Click to collapse
Are you using any LED apps? I don't see any issues.
This isn't built using VZW source is it?
bobbarker2 said:
This isn't built using VZW source is it?
Click to expand...
Click to collapse
No...but everything works. Source is listed in OP.
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
R6_KK is up... http://forum.xda-developers.com/showthread.php?p=57886425
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.5.0.trltevzw
manbat said:
R6_KK is up... http://forum.xda-developers.com/showthread.php?p=57886425
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.5.0.trltevzw
Click to expand...
Click to collapse
I'll update the OP tonight.
Sent from my SM-N910F
Thread updated!
After flash the kernel go to play store and install Synapse apk.
Enjoy it!
Changelog
March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes
I'm confused why there is a Lollipop version? Is that not for VZW?
Mibuix0r said:
I'm confused why there is a Lollipop version? Is that not for VZW?
Click to expand...
Click to collapse
My Bad I actually though LL was released for this device, I've made the changes now.
Kernel updated!
March- 5 -2015 nightly r7
-Added KCAL - Advanced color control
I'll update the OP later meanwhile you may download it from here
Nadia nightly r7 kk - http://www.mediafire.com/download/d2v2p5l68t4laz8/Nadia-nightly-r7-KK-SM-N910F-G-T-V-W8.zip
Color control - http://www.mediafire.com/download/xj8za53ia2njico/re.codefi.savoca.kcal-v1.1.apk
Sent from my SM-N910F
Sent from my SM-N910F
New Color setting which looks more better try this and post your results.
Make sure you set your Display mode from Settings to Basic and try this
Thanks to @Psycho_666