Hi Guys,
I'm new to this Forum so please pardon if i'm not following any rules and mistakenly posted the thread in the wrong location.
I had installed Clockworkmod Recovery from "theandroidsoul"
Then I have Samsung Galaxy S2 i9100. Recently i have installed a custom ROM on it provided by JellyBam ROM 20121023 – i9100 (courtesy: igio90.)
It has upgraded my phone to:
Android version: 4.1.2
Baseband: I9100DDLP8
Kernel Version:[email protected]
AOKP Version: JellyBam.AOKP.Build5
Build number: JellyBam AOKP 20121023
I have found it to be unstable as there were many functionality that have been lost including FM, 5.1 surround sound, MTP and mass storage connection, etc.
I would like to remove the ROM completely and install another of ROM
Please suggest me the following:
1. can i go back to ICS 4.0.1 by removing this rom and instaliling ICS from odin? what would be a recommended procedure for it?
2. Will i BRIK my phone in this process?
3. Can i install any other version of Jelly bean custom rom using ODIN, what would be a recommended procedure for it?
Guys i need your help ASAP as i cannot stay with this unstable ROM for long. any help is hugely appreciated.
Cyanogen Mod 10
Nitin_Zambre said:
Hi Guys,
I'm new to this Forum so please pardon if i'm not following any rules and mistakenly posted the thread in the wrong location.
I had installed Clockworkmod Recovery from "theandroidsoul"
Then I have Samsung Galaxy S2 i9100. Recently i have installed a custom ROM on it provided by JellyBam ROM 20121023 – i9100 (courtesy: igio90.)
It has upgraded my phone to:
Android version: 4.1.2
Baseband: I9100DDLP8
Kernel Version:[email protected]
AOKP Version: JellyBam.AOKP.Build5
Build number: JellyBam AOKP 20121023
I have found it to be unstable as there were many functionality that have been lost including FM, 5.1 surround sound, MTP and mass storage connection, etc.
I would like to remove the ROM completely and install another of ROM
Please suggest me the following:
1. can i go back to ICS 4.0.1 by removing this rom and instaliling ICS from odin? what would be a recommended procedure for it?
2. Will i BRIK my phone in this process?
3. Can i install any other version of Jelly bean custom rom using ODIN, what would be a recommended procedure for it?
Guys i need your help ASAP as i cannot stay with this unstable ROM for long. any help is hugely appreciated.
Click to expand...
Click to collapse
from what i can see you need a stable custom ROM with nice Features, i recommend you Cyanogen Mod 10 Jelly Bean... i Have it on my XPERIA ARC S and it works perfectly with no detected bugs, only one thing that i dont care about is that no more HDMI setting... the prcedure is quit easy and if you got stuck you can go back and ask for help, i dont think you can brick your phone if you follow steps and make a minor mistake.. if you would like to try, i can help you in everything, and please hit "THANKS" if i helped
Omessy7 said:
from what i can see you need a stable custom ROM with nice Features, i recommend you Cyanogen Mod 10 Jelly Bean... i Have it on my XPERIA ARC S and it works perfectly with no detected bugs, only one thing that i dont care about is that no more HDMI setting... the prcedure is quit easy and if you got stuck you can go back and ask for help, i dont think you can brick your phone if you follow steps and make a minor mistake.. if you would like to try, i can help you in everything, and please hit "THANKS" if i helped
Click to expand...
Click to collapse
Install Cm10, nice, no bugs so far, check forums for your device.
Related
Hi all!
I'm sorry if this question been asked before! which i see it has ! But I'm confussed to what to do! As there are several different answers to the same question ???????
So this is my problem!
I have a Galaxy s2 i9000 which i updated the ROM to Resurrection Remix ICS v1.0 by westcrip. a few months back!
All went ok. Rooted phone using odin and “CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar” from galaxy s2 root.com.
got it all working and all great till It came to other day! I wanted to udate to Resurrection remix 2.6 or v3.0 ??
But when it came to CWM - it kept coming up with
This version of CWM Manager should be used with CF-Root v5.0 or newer. It appears you are running a different kernel. Various features have been disabled.
including the backup and recovery! I've tried ROM manager too. that says that I have CWM 2.5.1.2 and also CWM touch not available for this device. my phone is rooted. I have Su0.93,busybox v1.17.1
BUT NO JOY !! I tried to backup on there too and just takes me to CWM with no backup on the menu..
I always like to do a backup in case of problems! But cant in this case!
I read that flashing kernel could work! But as I'n not 100% which one to use! I'd be happy of any advise! I really would like to update now! As Res V2.6/v3 look great! so does the Salman ICS ROM..
I was thinking of flashing Siyah Kernel v.3.3.2 for Galaxy S2 i9100! [ICS] - but read somewhere this has problems with Res v2.6..
Can some1 please just tell me in simple terms, What is the best way to go about doing this! and if have to use new kernel which one and where?? I really would be most grateful of the help !!
Many Many thanks in advance .. A person who don't want to mess his much loved s2 up !!!!
Coxy...q said:
Hi all!
I'm sorry if this question been asked before! which i see it has ! But I'm confussed to what to do! As there are several different answers to the same question ???????
So this is my problem!
I have a Galaxy s2 i9000 which i updated the ROM to Resurrection Remix ICS v1.0 by westcrip. a few months back!
All went ok. Rooted phone using odin and “CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar” from galaxy s2 root.com.
got it all working and all great till It came to other day! I wanted to udate to Resurrection remix 2.6 or v3.0 ??
But when it came to CWM - it kept coming up with
This version of CWM Manager should be used with CF-Root v5.0 or newer. It appears you are running a different kernel. Various features have been disabled.
including the backup and recovery! I've tried ROM manager too. that says that I have CWM 2.5.1.2 and also CWM touch not available for this device. my phone is rooted. I have Su0.93,busybox v1.17.1
BUT NO JOY !! I tried to backup on there too and just takes me to CWM with no backup on the menu..
I always like to do a backup in case of problems! But cant in this case!
I read that flashing kernel could work! But as I'n not 100% which one to use! I'd be happy of any advise! I really would like to update now! As Res V2.6/v3 look great! so does the Salman ICS ROM..
I was thinking of flashing Siyah Kernel v.3.3.2 for Galaxy S2 i9100! [ICS] - but read somewhere this has problems with Res v2.6..
Can some1 please just tell me in simple terms, What is the best way to go about doing this! and if have to use new kernel which one and where?? I really would be most grateful of the help !!
Many Many thanks in advance .. A person who don't want to mess his much loved s2 up !!!!
Click to expand...
Click to collapse
siyah v3.3.2 has no problem of any sort ma8 its a very stable one u can flash it without any issues.
also u have the latest versions like 3.4.1 and 3.5.2(which supports Jelly Bean)
i was using 3.3.2 on RRv2.6 and it had a very good batt life and performance for sure
Hi everyone
My issue is somehow strange, I performed a clean install (full wipe, etc..) with Dorimanx Kernel 7.43 of Neat ROM 4.0 (XXLSJ) as primary ROM
When I install secondary ROM, Neat ROM boot loops and get stuck on the first Samsung bootanimation (where the logo is being drawn again and again)
I fixed permissions for secondary ROM, but still no boot, neither primary, nor secondary
I thought that ROMs are independent but seems like I'm wrong
Now I'm hesitating to retest the same with 7.44 kernel and 4.1 ROM (XWLS8)
What Have I messed ?
PS:
I reflashed my ROM and my phone is working fine, this thread is not about solving bootloop (with hundreds of threads dedicated here), it's about dual booting
Dorimanx doesn't support dual boot with any Samsung jelly bean roms currently
So it's kernel related, I did not notice this detail when flying over the changelog or the infinite number of replies :silly:
Thank you for the quick answer...
Try this Siyah MCM Kernel ver 3.0.60
http://sourceforge.net/projects/cm10i9100vsync/files/kernel/
I believe it is smoother than the Dorimanx Kernel and it supports dualboot.
Tha'ts the Kernels XDA thread:
http://forum.xda-developers.com/showthread.php?t=1891222
Not exactly sure what Conny has posted, but just incase you didn't know dual boot can't work with any siyah or dorimanx kernel till the dev fixes it, and only siyah 6 beta 1 or above and dorimanx v3.37 or above work with samsung jelly bean
1Chef said:
Not exactly sure what Conny has posted, but just incase you didn't know dual boot can't work with any siyah or dorimanx kernel till the dev fixes it, and only siyah 6 beta 1 or above and dorimanx v3.37 or above work with samsung jelly bean
Click to expand...
Click to collapse
1Chef is right, I thought Neatrom published a 4.2.1 release
Considering neatrom is based on stock Samsung and not aosp then it can't have released 4.2.1
Got another bootloop while trying (hopfully) the new setup (7.44 + 4.1.2 XWLS8), nothing happened
I think that siyah will give the same result as Dorimanx is forked from, maybe with latest stable future release of Siyah, it could be fixed.
Now, I got tired from re-re-re-re-reflashing my phone :silly:
I'd better wait
Newbie Takes The Plunge to Custom Rom and Kernel: Any Suggestions?
I'm still fairly a newbie, but have rooted two phones so far, thanks to the great information, tutorials, guides, resources, and videos posted here on XDA. I have a Samsung Galaxy S2 GT-I9100 and my daughter's Samsung Epic 4G.
I rooted my I9100 successfully a few months ago, but have never flashed a rom. I'm going to try out Neat Rom Lite tonight. I've finally gotten up the nerve!
QUESTION: Does anyone have any suggestion of which kernel I should flash along with it? I need better battery life. I would love to be able to watch videos and use the phone regularly and make it through the whole day without charging. Is this possible? Can a kernel and Neat Rom Lite do this for me?
Also, I rooted the Samsung Epic 4G yesterday. Any suggestions on what rom and kernel to put on it and how would be greatly appreciated.
Thanks a bunch for any assistance and comments.
Hello everyone
I'm thinking to install a custom ROM to my P7500 3g but still not sure which one. I specially want to play my 720p brrip movies on my tablet. Any good roms to recommend? btw i used overcome rom like last year,the first release i think. it was good but couldnt follow the hack scene since.
If you have no special needs not covered by stock rom i would advice to stay on stock rom.
GV
Well the stock rom starts on lagging on me lately and uses too much of the ram.Plus since I havent heard of jelly bean coming to the tab 10.1, i wanted to try the custom roms.do you recommend the cm 10.1 or the overcome rom?
I have no personal experience with other Roms on my P7500 but i have tried cm10 on my other Android devices. From what i read on the xda forum i am not at all sure that another rom (ICS or JB) will improve my Tab rsponsiveness. My Tab runs currently extra smoothly with stock 3,2 HC rom, rooted and overclocked with setcpu app using Pershoot's kernel (thanks)
GV
Be very careful .. I bricked my first tab by simply putting an american rom on it by accident. When I went to factory reset from the recovery it triggered DSOD and locked the device.. A very rapid learning curve indeed!!
aaanyway....
Been on CM10.1 for a week now on my GT-P7500.. fast , buttery smooth and a pain free install....make a nandroid backup from recovery first !! do a wipe and factory reset afterwards. I love the look and feel of it now... mmmm shiny
Thanks for the reply caramel.Ok i'll install the CM 10.1 too I'm using 4.0.4 now.In Galaxy s2 the 4.0.4 has a wipe data bug, bricks the device.Does the tab has that too?
burning_afd said:
Thanks for the reply caramel.Ok i'll install the CM 10.1 too I'm using 4.0.4 now.In Galaxy s2 the 4.0.4 has a wipe data bug, bricks the device.Does the tab has that too?
Click to expand...
Click to collapse
IF you've flashed a custom recovery, there's no worry with the emmc bug.
Hi Guys,
I have a question, what a surprise
Im trying to get my allsharecast dongle to run for 4 days now and still its not working.
The system:
Samsung galaxy s3
Android 4.1.2
Boeffla Kernel (3.0 beta 7)
Ultima Rom (tried on v13 now v14)
TouchWizz
I have tried different things. Samsung Stock Kernel (Instelled with the Rom insteller - Not working)
I have tried Triangle away, because I have seen some posts where people say it worked with it. - Not working
Also I have tried omega rom v.44? I dont know exactly (Android 4.1.2)
Before a new rom or kernel I did always full-wipe.
Now my question is. Is it possible or not to get the Dongle run with a custom.rom?
If yes, what rom and what should I.exactly do?
(This is the first time I run a cfw on my sgs3, so I do not really have much experience, so I really need a step by step description )
I know this is not the first time people are asking about the dongle and cfw, but I really didn't find any detailed information about if its working or not and what to do if it still always disconnects.
Hope you can help me
Bye, Haris
Read this : http://forum.xda-developers.com/showthread.php?t=1872278
Sent from my Nexus 7 (2013)
Hi,
I have been trying to look for answers in the forum but it is too confusing...My status is like this: I got the phone and installed Siyha 4, that was many months ago, if I look in About this is what I see;
- Android version: 4.0.3
- Baseband v: I9100BGLP2
- kernel v: [email protected]))
- Build number: IML74K.BGLP8
It is working, but it's showing random hangs, GPS does not work many times...and as I see there is even official support for JB, I would like to upgrade. But, I dont know what steps and even what I should upgrade. Not sure if Siyah I can just upgrade without issues, if then I can install any rom I want of top of it...etc. I would be really gratefull if somebody could tell me:
- what I need to upgrade
- in what order
then I will investigate and manage to do it myself. For example, I am after instructions like this (making them up as an example, no idea if this is correct):
1. upgrade to SiyahKernel S2-v6.0beta5
2. restart
3. install ROM cm-10.1.3-i9100.zip
I know there is no 'best' rom, just asking for advise for any JB (or later if there is stable one) rom that works well (no random crashes frquently, GPS working, I really need that).
thanks in advance!
vadexlux said:
Hi,
I have been trying to look for answers in the forum but it is too confusing...My status is like this: I got the phone and installed Siyha 4, that was many months ago, if I look in About this is what I see;
- Android version: 4.0.3
- Baseband v: I9100BGLP2
- kernel v: [email protected]))
- Build number: IML74K.BGLP8
It is working, but it's showing random hangs, GPS does not work many times...and as I see there is even official support for JB, I would like to upgrade. But, I dont know what steps and even what I should upgrade. Not sure if Siyah I can just upgrade without issues, if then I can install any rom I want of top of it...etc. I would be really gratefull if somebody could tell me:
- what I need to upgrade
- in what order
then I will investigate and manage to do it myself. For example, I am after instructions like this (making them up as an example, no idea if this is correct):
1. upgrade to SiyahKernel S2-v6.0beta5
2. restart
3. install ROM cm-10.1.3-i9100.zip
I know there is no 'best' rom, just asking for advise for any JB (or later if there is stable one) rom that works well (no random crashes frquently, GPS working, I really need that).
thanks in advance!
Click to expand...
Click to collapse
1-to flash stock roms(tar extension) use odin or to flash custom roms (zip extention)then you need a custom recovery (eg ClockWorkMod).
2-if GPS is really matters to you,then dont flash cm10.1 is it have a known issue (gps is not working 99% of all time)see known issues for cm10.1:
http://wiki.cyanogenmod.org/w/Known_Issues_page_for_i9100
if you want stock rom(eg 4.1.2) look here:
http://forum.xda-developers.com/showthread.php?t=1544487"
if you want custom rom with working gps use(in my opinion)neatrom lite:
http://forum.xda-developers.com/showthread.php?t=1569686
guide to flash with odin:
http://forum.xda-developers.com/showthread.php?t=1671969
always check the roms with md5sum check.
Hope it helps.
thanks!
OK, so let's say I'll go with stock rom (I'll remove most of samsung crap with RootDelete)...What about Siyah kernel I installed:
- is it replaced when installing stock rom?
- if not, can I update it to latest Siyah version? should I?
vadexlux said:
thanks!
OK, so let's say I'll go with stock rom (I'll remove most of samsung crap with RootDelete)...What about Siyah kernel I installed:
- is it replaced when installing stock rom?
- if not, can I update it to latest Siyah version? should I?
Click to expand...
Click to collapse
yes,because every rom has a kernel,but if you want Siyah kernel,after flashing the stock rom flash Siyah kernel again.if you want to update to stock jelly bean 4.1.2 then flash latest Siyah kernel.
Sorry for bad english.