[Q] how/what should I upgrade from my current setup Siyah4.1/ICS4.0.3 - Galaxy S II Q&A, Help & Troubleshooting

Hi,
I have been trying to look for answers in the forum but it is too confusing...My status is like this: I got the phone and installed Siyha 4, that was many months ago, if I look in About this is what I see;
- Android version: 4.0.3
- Baseband v: I9100BGLP2
- kernel v: [email protected]))
- Build number: IML74K.BGLP8
It is working, but it's showing random hangs, GPS does not work many times...and as I see there is even official support for JB, I would like to upgrade. But, I dont know what steps and even what I should upgrade. Not sure if Siyah I can just upgrade without issues, if then I can install any rom I want of top of it...etc. I would be really gratefull if somebody could tell me:
- what I need to upgrade
- in what order
then I will investigate and manage to do it myself. For example, I am after instructions like this (making them up as an example, no idea if this is correct):
1. upgrade to SiyahKernel S2-v6.0beta5
2. restart
3. install ROM cm-10.1.3-i9100.zip
I know there is no 'best' rom, just asking for advise for any JB (or later if there is stable one) rom that works well (no random crashes frquently, GPS working, I really need that).
thanks in advance!

vadexlux said:
Hi,
I have been trying to look for answers in the forum but it is too confusing...My status is like this: I got the phone and installed Siyha 4, that was many months ago, if I look in About this is what I see;
- Android version: 4.0.3
- Baseband v: I9100BGLP2
- kernel v: [email protected]))
- Build number: IML74K.BGLP8
It is working, but it's showing random hangs, GPS does not work many times...and as I see there is even official support for JB, I would like to upgrade. But, I dont know what steps and even what I should upgrade. Not sure if Siyah I can just upgrade without issues, if then I can install any rom I want of top of it...etc. I would be really gratefull if somebody could tell me:
- what I need to upgrade
- in what order
then I will investigate and manage to do it myself. For example, I am after instructions like this (making them up as an example, no idea if this is correct):
1. upgrade to SiyahKernel S2-v6.0beta5
2. restart
3. install ROM cm-10.1.3-i9100.zip
I know there is no 'best' rom, just asking for advise for any JB (or later if there is stable one) rom that works well (no random crashes frquently, GPS working, I really need that).
thanks in advance!
Click to expand...
Click to collapse
1-to flash stock roms(tar extension) use odin or to flash custom roms (zip extention)then you need a custom recovery (eg ClockWorkMod).
2-if GPS is really matters to you,then dont flash cm10.1 is it have a known issue (gps is not working 99% of all time)see known issues for cm10.1:
http://wiki.cyanogenmod.org/w/Known_Issues_page_for_i9100
if you want stock rom(eg 4.1.2) look here:
http://forum.xda-developers.com/showthread.php?t=1544487"
if you want custom rom with working gps use(in my opinion)neatrom lite:
http://forum.xda-developers.com/showthread.php?t=1569686
guide to flash with odin:
http://forum.xda-developers.com/showthread.php?t=1671969
always check the roms with md5sum check.
Hope it helps.

thanks!
OK, so let's say I'll go with stock rom (I'll remove most of samsung crap with RootDelete)...What about Siyah kernel I installed:
- is it replaced when installing stock rom?
- if not, can I update it to latest Siyah version? should I?

vadexlux said:
thanks!
OK, so let's say I'll go with stock rom (I'll remove most of samsung crap with RootDelete)...What about Siyah kernel I installed:
- is it replaced when installing stock rom?
- if not, can I update it to latest Siyah version? should I?
Click to expand...
Click to collapse
yes,because every rom has a kernel,but if you want Siyah kernel,after flashing the stock rom flash Siyah kernel again.if you want to update to stock jelly bean 4.1.2 then flash latest Siyah kernel.
Sorry for bad english.

Related

Multi Boot/Custom ROMs - Advanced users only plz

Hi All,
I searched the forums and though this question has been asked couple of times, I failed to get a satisfying and consolidated answer, so seeking a solution here.
Scenario: X10i, 2.3.3 Stock, rooted using aZuZu. Self-customized framework-res.apk and SemcUxpRes.apk and a truckload of apps. Poor battery life, slightly laggy.
I am equally drawn towards CM7 as well as Wolfbreak 4. I know that both are completely different flavours, but much as I love the Cyanogen innovations, so do i love the tweaks done in WB's ROM with minimal changes to the UI.
Questions:
When I backup my current ROM using xrecovery, what all elements get backed up? More precisely, if I make a backup of my stock ROM using xRecovery, will it backup all the installed apps, conntacts, messages and appdata?
If I restore this backup at a later date, will I be able to get back my phone in the same state as it was backed up? (e.g. I am on level 14 on angrybirds and I made a backup, wiped my phone, and then restored the backup, will I have to start Angrybirds afresh or I can continue from where I left off, as though nothing had happened?)
Is it possible to have multiboot on the X10? So that Everytime I boot up, I can choose whether I want to load the CM7 ROM or the WB4 ROM?
Thanks in advance.
1 yes, the things you mentioned will be backed up (but not the baseband & the kernel)
2 yes, you can play angry birds from where you left off (but as I said you can't backup/restore baseband & kernel)
3 no, not yet. Before official gb there was a solution for dual booting a 2.1 rom with a 2.2/2.3 rom, but I believe dual booting two 2.3 roms is not possible for now
riginal said:
1 yes, the things you mentioned will be backed up (but not the baseband & the kernel)
2 yes, you can play angry birds from where you left off (but as I said you can't backup/restore baseband & kernel)
3 no, not yet. Before official gb there was a solution for dual booting a 2.1 rom with a 2.2/2.3 rom, but I believe dual booting two 2.3 roms is not possible for now
Click to expand...
Click to collapse
Thanks for that! Just a couple of doubts here:
As you mentioned, the BB and kernel wont be backed up. How exactly will that affect my device? Will it lead to any compatibility issues if I restore to a backed up ROM?
Do I need to keep a note of the Baseband and Kernel versions of all the ROMS which I intend to flash, and flash the corresponding bb & kernel versions prior to recovering a backed-up ROM? To be more clear, supposing I am on bb .71 and kernel 2.6.29, and I flash a new ROM with a different kernel. If I wish to go back to stock by recovering my backup, will I have to flash the bb .71 and 2.6.29 kernel again?
I noticed Woflbreak's ROM uses kernel version 2.3, but I am on a different kernel version (2.6.29). Do I need to downgrade to 2.3 kernel before using the WB ROM? Won't an older version of the kernel cause a drop in performance?
well to sum it up yes you need to keep a note of kernel & baseband for avoiding any compability issue, the kernel part is pretty easy, 2.1 roms all use the same kernel & 2.3 roms another kernel, If you want to go from a 2.1 rom to a 2.3 rom you need to flash the appropriate kernel (& the baseband) with flashtools, but switching from a 2.1 rom to another 2.1 rom or from a 2.3 rom to a 2.3 rom shouldn't be a problem kernel-wise, you just need to pay attention to the required baseband & flash the right one if necessary
what rom are you on?
& by the way 2.3 on Wolfbreak is not the kernel, it's the android version
the bb and kernel are in a 7zip archive linked on the page for wolfs 4.0 along with the newest patch. it explains how to do it all on the page. You must take into consideration when trying a new rom the basebands that it is made for.
Basebands can be found here.
Most newer roms will tell you in the post which baseband you need.
Also see if users post other working baseband versions along with kernel versions. how to use a custom kernel with it and a post explaining custom kernels is here.

Newbie - need help with Darky and Litening ROM

Hi all,
Sorry if this is kind of double post ( I have been advised to post it in this section)
Firstly I am a complete newbie so any step by step guide , pointer to the correct link or direction is so much appreciated.
My situation is:
I have SGS2 with:
Model Number: GT-I9100
Android Version : 2.3.3
Baseband Version: I9100xxKG1
Kernel 2.6..35.7-I9100ZSKG2-CL361136
Build number : GingerBread ZSKG2
1. I want to try either Litening Rom 6.1 or Darky ROM.
* Is this the correct Link to follow?
Darky: http://forum.xda-developers.com/show....php?t=1159920
Litening : http://forum.xda-developers.com/show....php?t=1095274
** Do I need to root the phone before installing the Litening ROM? or can I go ahead with my current spec and flash it with Litening ROM via ODIN?
2. I want to preserve my Current state of my Device before flashing with Darky or Litening.
* Is it possible to back up everything so I can return it to the way it is for Warranty purposes?
* or is it not possible to put back when we installed Darky or Litening?
3. Which one do you recommend Darky or Litening? - which one is less bug at this stage?
I am hoping that by flashing with the custom rom, it will make the device
- faster more efficient
- still able to get good GPS signal (or better)
- Good Wifi reception (or better)
- Good battery life (or better than now)
Please let me know if this is a false hope?
Thanks guys - sorry for the very basic questions.
Regards,
I am wondering if anyone else has experience the same process and would like to share their tips .
Thanks again guys
ardabelati said:
Hi all,
Sorry if this is kind of double post ( I have been advised to post it in this section)
Firstly I am a complete newbie so any step by step guide , pointer to the correct link or direction is so much appreciated.
My situation is:
I have SGS2 with:
Model Number: GT-I9100
Android Version : 2.3.3
Baseband Version: I9100xxKG1
Kernel 2.6..35.7-I9100ZSKG2-CL361136
Build number : GingerBread ZSKG2
1. I want to try either Litening Rom 6.1 or Darky ROM.
* Is this the correct Link to follow?
Darky: http://forum.xda-developers.com/show....php?t=1159920
Litening : http://forum.xda-developers.com/show....php?t=1095274
** Do I need to root the phone before installing the Litening ROM? or can I go ahead with my current spec and flash it with Litening ROM via ODIN?
2. I want to preserve my Current state of my Device before flashing with Darky or Litening.
* Is it possible to back up everything so I can return it to the way it is for Warranty purposes?
* or is it not possible to put back when we installed Darky or Litening?
3. Which one do you recommend Darky or Litening? - which one is less bug at this stage?
I am hoping that by flashing with the custom rom, it will make the device
- faster more efficient
- still able to get good GPS signal (or better)
- Good Wifi reception (or better)
- Good battery life (or better than now)
Please let me know if this is a false hope?
Thanks guys - sorry for the very basic questions.
Regards,
Click to expand...
Click to collapse
First its your own choose for a ROM.
But if you will Litening rom you must flash it with Odin.
For Darky ROM: I dont know.
For a better battery life check this thread.
Speedmod is the best battery kernel.
Your device is not very faster but a little bit.
I dont know about wifi and gps.
P.S I dont have a rooted SGS2
I found this link here:
http://forum.xda-developers.com/showthread.php?t=1095274
is this the one I need to follow?
Do I need to install speedmod or CWM separately if I want to install Litening ROM?
can I directly flash directly from :
Model Number: GT-I9100
Android Version : 2.3.3
Baseband Version: I9100xxKG1
Kernel 2.6..35.7-I9100ZSKG2-CL361136
Build number : GingerBread ZSKG2
to Litening ROM 6.1??
Thanks again
Yes, you can.
Litening rom will be a bit faster than Darky rom because litening will have already a overclocked frequency to 1.6Ghz with it.
Every custom rom build using stock like Darky & Litening & Villian will provide more stable system than Cyanogen, MIUI & AOSP roms. That's what I've experienced.
Problems that you may faced after flashing custom are it may has bootloop, stuck on splash screen. If you got a bootloop, try flash it again, sometimes it needs to flash twice. If splash screen never pass then do a full wipe in CMW, wipe user data, partition, wipe delvik.

[Q] updating I9100 kernel

OK so I have an GS2 running:
rom = 20120806 CM9
kernel version = [email protected]#1 SMP PREEMPT Sun Aug 5
Baseband = I9100XXKE7
Android = 4.0.4
Ok so I did the whole Odin thing for the first and only time around March/April updating from GB and haven't touched the kernel version of this phone again so it's quite old. I want to update to CM10 but I'm not sure if all my versions are correct and all the reading I do with kernels slightly confuses me because I'm not sure how it affects my current version as the CF-Root kernel I did ages ago isn't in my 'about phone', so I needed to ask on here because Whirlpool didn't respond.
Can I simply flash CM10 straight over the top? Or do/can I update the kernel version to do this? I would ideally love to have a kernel that optimizes battery life and gives me the ability to have the soft buttons flash for a notification.
I found these threads, are they applicable to my case?
http://forum.xda-developers.com/showthread.php?t=1287726
http://forum.xda-developers.com/showthread.php?t=1311933&highlight=i9100xxke7
Or can someone point me in the right direction because I'm happy to read but I need help narrowing my search to my situation.
Cheers.
You are running CM9 and you want to flash CM10? If yes, then you don't need to flash any kernel to do that.
Just follow these steps:
1. Download latest CM10 nightly and Jellybean Gapps
2. Backup your contacts, messages, and apps
3. Boot to CWM recovery
- Backup your ROM (under Backup and restore (optional)
- wipe data / factory reset
- format /system (under mounts and storage)
- flash CM10
- flash Jellybean Gapps
- reboot phone
Done.
Thanks Jokesy. Much appreciated
Sent from my GT-I9100 using xda app-developers app
Sultan89 said:
OK so I have an GS2 running:
rom = 20120806 CM9
kernel version = [email protected]#1 SMP PREEMPT Sun Aug 5
Baseband = I9100XXKE7
Android = 4.0.4
Ok so I did the whole Odin thing for the first and only time around March/April updating from GB and haven't touched the kernel version of this phone again so it's quite old. I want to update to CM10 but I'm not sure if all my versions are correct and all the reading I do with kernels slightly confuses me because I'm not sure how it affects my current version as the CF-Root kernel I did ages ago isn't in my 'about phone', so I needed to ask on here because Whirlpool didn't respond.
Can I simply flash CM10 straight over the top? Or do/can I update the kernel version to do this? I would ideally love to have a kernel that optimizes battery life and gives me the ability to have the soft buttons flash for a notification.
I found these threads, are they applicable to my case?
http://forum.xda-developers.com/showthread.php?t=1287726
http://forum.xda-developers.com/showthread.php?t=1311933&highlight=i9100xxke7
Or can someone point me in the right direction because I'm happy to read but I need help narrowing my search to my situation.
Cheers.
Click to expand...
Click to collapse
Here is the CM 10 thread for nighty buildshttp://forum.xda-developers.com/showthread.php?t=1794758
I was on MIUI (ICS 4.0.4) and have jumped to Resurrection Remix 3.0.9 and now on Revolt JB 2.5 both of which are based on AOKP and CM10.
I flashed Siyah and then DreamKernel and finally landed on Dorimanx 5.85. So I think you should be okay flashing a new Kernel for your current settings. I would suggest trying out different kernels as there is no best kernel and it depends on your usage. Dormianx has a Battery and Great Battery profile which you can activate via Extweaks app or in recovery. I am not sure about the soft buttons flash though.

[Q] Need information about installing the new ROM on Samsung Galaxy S2 I9100

Hi Guys,
I'm new to this Forum so please pardon if i'm not following any rules and mistakenly posted the thread in the wrong location.
I had installed Clockworkmod Recovery from "theandroidsoul"
Then I have Samsung Galaxy S2 i9100. Recently i have installed a custom ROM on it provided by JellyBam ROM 20121023 – i9100 (courtesy: igio90.)
It has upgraded my phone to:
Android version: 4.1.2
Baseband: I9100DDLP8
Kernel Version:[email protected]
AOKP Version: JellyBam.AOKP.Build5
Build number: JellyBam AOKP 20121023
I have found it to be unstable as there were many functionality that have been lost including FM, 5.1 surround sound, MTP and mass storage connection, etc.
I would like to remove the ROM completely and install another of ROM
Please suggest me the following:
1. can i go back to ICS 4.0.1 by removing this rom and instaliling ICS from odin? what would be a recommended procedure for it?
2. Will i BRIK my phone in this process?
3. Can i install any other version of Jelly bean custom rom using ODIN, what would be a recommended procedure for it?
Guys i need your help ASAP as i cannot stay with this unstable ROM for long. any help is hugely appreciated.
Cyanogen Mod 10
Nitin_Zambre said:
Hi Guys,
I'm new to this Forum so please pardon if i'm not following any rules and mistakenly posted the thread in the wrong location.
I had installed Clockworkmod Recovery from "theandroidsoul"
Then I have Samsung Galaxy S2 i9100. Recently i have installed a custom ROM on it provided by JellyBam ROM 20121023 – i9100 (courtesy: igio90.)
It has upgraded my phone to:
Android version: 4.1.2
Baseband: I9100DDLP8
Kernel Version:[email protected]
AOKP Version: JellyBam.AOKP.Build5
Build number: JellyBam AOKP 20121023
I have found it to be unstable as there were many functionality that have been lost including FM, 5.1 surround sound, MTP and mass storage connection, etc.
I would like to remove the ROM completely and install another of ROM
Please suggest me the following:
1. can i go back to ICS 4.0.1 by removing this rom and instaliling ICS from odin? what would be a recommended procedure for it?
2. Will i BRIK my phone in this process?
3. Can i install any other version of Jelly bean custom rom using ODIN, what would be a recommended procedure for it?
Guys i need your help ASAP as i cannot stay with this unstable ROM for long. any help is hugely appreciated.
Click to expand...
Click to collapse
from what i can see you need a stable custom ROM with nice Features, i recommend you Cyanogen Mod 10 Jelly Bean... i Have it on my XPERIA ARC S and it works perfectly with no detected bugs, only one thing that i dont care about is that no more HDMI setting... the prcedure is quit easy and if you got stuck you can go back and ask for help, i dont think you can brick your phone if you follow steps and make a minor mistake.. if you would like to try, i can help you in everything, and please hit "THANKS" if i helped
Omessy7 said:
from what i can see you need a stable custom ROM with nice Features, i recommend you Cyanogen Mod 10 Jelly Bean... i Have it on my XPERIA ARC S and it works perfectly with no detected bugs, only one thing that i dont care about is that no more HDMI setting... the prcedure is quit easy and if you got stuck you can go back and ask for help, i dont think you can brick your phone if you follow steps and make a minor mistake.. if you would like to try, i can help you in everything, and please hit "THANKS" if i helped
Click to expand...
Click to collapse
Install Cm10, nice, no bugs so far, check forums for your device.

[Q] Installing BLN on Galaxy SII (CM10)

I have searched everywhere and didn't find anything related to my phone.
So I have a Galaxy SII (GT-I9100) running CyanogenMod 10 and I want to install BLN. I found Siyah Kernel on the net and it supports BLN.
Now my questions are:
1: Will flashing Siyah Kernel wipe my files? I can't afford that right now.
1b: What will happen with my CM10 rom? I read about dual boot, but I am really stuck, I wish to have one ROM and not two.
2: Can I use the latest Siyah Kernel for this? At gokhanmoral website.
3: What will change? I am running CM10 (see picture attached).
4: Is battery life really improving?
5: Is there any change I brick my phone losing all data?
Thanks in advance,
Nerminzz.
Nerminzz said:
I have searched everywhere and didn't find anything related to my phone.
So I have a Galaxy SII (GT-I9100) running CyanogenMod 10 and I want to install BLN. I found Siyah Kernel on the net and it supports BLN.
Now my questions are:
1: Will flashing Siyah Kernel wipe my files? I can't afford that right now.
1b: What will happen with my CM10 rom? I read about dual boot, but I am really stuck, I wish to have one ROM and not two.
2: Can I use the latest Siyah Kernel for this? At gokhanmoral website.
3: What will change? I am running CM10 (see picture attached).
4: Is battery life really improving?
5: Is there any change I brick my phone losing all data?
Thanks in advance,
Nerminzz.
Click to expand...
Click to collapse
1) No it wont wipe your files
1b) You dont have to install a second rom if you dont want to
2) Yes you can
3) Your kernel will change
4)No comments
5) You wont brick your phone if you follow the instructions
I just flashed it, went suprisingly fast. Thanks for the answers, BLN is working! :good:

Categories

Resources