Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Nillanic said:
Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Click to expand...
Click to collapse
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
R2DeeTard said:
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
Click to expand...
Click to collapse
Will it work if I flash the older version, since I don't have a backup of this specific rom, and then flash the newer one on top of that?
And which older version should I use?
If you flash an older version it will still have the borked radios. I think the only option you have at this point is to flash back to stock and start over.
Sent from my MB855 using xda premium
You don't need to go back to stock. Just flash the new rom that works. The updated rom is great. Use SMS Backup so you can keep your txt messages.
Sent from my MB855 using xda premium
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
koushi2012 said:
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
Click to expand...
Click to collapse
I flashed your GSM fix, and now I dont pick up any service on ANY rom, did full wipes, restores to known working roms, all that, and still no signal.
Mind you I think it has something to do with me being on Sprint in the US
HELP MEEEE
Did u wipe full..
if u belonged to sprint us then try miui which follows some special instructions while flashing sprint phones..,
Related
Hi all,
I am not able to get my photon connected to CDMA WS after flashing with CM9 RoM have tried with 0.5.2 and 0.6.0 and 0.6.1.
Have checked in device manager the correct port and CDMA WS connects to the port but not able to read from phone ?
Pl help.Due to this i am not not in a position to dump the new PRL update file / NV Dump file after flashing with new RoM
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
OrAmerika said:
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
Click to expand...
Click to collapse
Same issue was there when i flashed Roms using KS (tried CNA,CM9) and tried MUI Rom also still not use. But i was able to use it on stock RoM
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Also, make sure you have Jokers CWM.
Same issue
I was having the same issue, except right when my phone booted up it kept giving me the message that android.process.phone has stopped working, and it wouldn't let me connect to the mobile data network either.
Acvice said:
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Click to expand...
Click to collapse
Not able to find .3.1 can you pl direct me to the download site.
Akhileshjj said:
Not able to find .3.1 can you pl direct me to the download site.
Click to expand...
Click to collapse
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
bullfrog527 said:
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
Click to expand...
Click to collapse
thanks got it.
I just spent the last 6 hours figuring this out and go figure it would be in the Q&A section... Did a fresh stock flash, factory wipe, format cache, dalvik and system. Installed .3.1. Then ONLY wiped the dalvik cache and upgraded to the 6.1 i would stop getting the com.android.phone FC. If i did the factory wipe it would start FCing again.
cdma
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
sibin.mohan said:
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
Click to expand...
Click to collapse
are you asking about CDMA in india ?
Hi,
I installed CM 7.2.0-RC3
I would like to play around with some other ROMs
My questions are:
1) Any recommendations for some good ROMs? Specially ICS ROMs
2) Should I follow the exact same process as I did with CM (I used ROM Manager and ticked all the boxes - clear dalvik, clear something else etc)
3) I noticed that nandroid does not generate a single zip like flashing ROMs. How do I restore and why would I used this option if I can just re-flash ROM?
Thanks!!!
mickeycohen said:
Hi,
I installed CM 7.2.0-RC3
I would like to play around with some other ROMs
My questions are:
1) Any recommendations for some good ROMs? Specially ICS ROMs
2) Should I follow the exact same process as I did with CM (I used ROM Manager and ticked all the boxes - clear dalvik, clear something else etc)
3) I noticed that nandroid does not generate a single zip like flashing ROMs. How do I restore and why would I used this option if I can just re-flash ROM?
Thanks!!!
Click to expand...
Click to collapse
1. Joker's ICS ROM, Neutrino CM7 ROM, and NottachTrix4G GB ROM
2. Don't use ROM manager to flash ROMS, use a recovery ROM racers ect..
3. For nandroid, I personal do this. I do a backup of a ROM. And when I want to flash the ROM I flash the ROM itself, no Gapps or anything and then I restore the ROM with the nandroid backup.
Hope I answered your questions alright.
Voelker45 said:
1. Joker's ICS ROM, Neutrino CM7 ROM, and NottachTrix4G GB ROM
2. Don't use ROM manager to flash ROMS, use a recovery ROM racers ect..
3. For nandroid, I personal do this. I do a backup of a ROM. And when I want to flash the ROM I flash the ROM itself, no Gapps or anything and then I restore the ROM with the nandroid backup.
Hope I answered your questions alright.
Click to expand...
Click to collapse
I would agree with #1 and #2.
For #3 I would recommend a nandroid backup, then verify the backup before you reboot to make sure it is good. No need IMO to flash the original ROM when restoring from a nandroid. Much more important to do a full wipe first, then just flash your nandroid backup.
Voelker45 said:
2. Don't use ROM manager to flash ROMS, use a recovery ROM racers ect..
Click to expand...
Click to collapse
ROM Manager is fine as long as you have good experience with your recovery image. It exists for a reason.
nerfman100 said:
ROM Manager is fine as long as you have good experience with your recovery image. It exists for a reason.
Click to expand...
Click to collapse
I just use Romracer's for a worry free experience.
Sent from my MB860 using XDA
Deggy said:
I just use Romracer's for a worry free experience.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
+1
~Sent from my Unlocked, Rooted, Faux 1.45gHz Motorola Atrix 4G~
AOKP is also a really good ROM. You should check it out.
Sent from my Xoom using XDA Premium HD app
Well, if ROM manager does the job I think I will use it. I'm assuming it's simply building a script that does everything that's needed.
I really don't have any experience with recovery
As for backups, I think I will simply use Titanium for my Apps and Data. Everything else I need is backed up on Google so I should be fine
Thanks everyone!!!
OK, download gapps from:
http://www.jokersax.com/developer-pages/jokersax/cm9-gapps/
and aokp from http://d-h.st/e7A
Are these ok?
Can I simply go ahead and install through ROM Manager?
Gapps from here
http://goo.im/gapps
*Edit*
Actually I think that AOKP zip comes with gapps as an option in it.
And it doesn't matter if you use ROM manager or not.
Sent from my Xoom using XDA Premium HD app
Thanks!
Where can I find build 38 for the Atrix?
mickeycohen said:
Well, if ROM manager does the job I think I will use it. I'm assuming it's simply building a script that does everything that's needed.
I really don't have any experience with recovery
As for backups, I think I will simply use Titanium for my Apps and Data. Everything else I need is backed up on Google so I should be fine
Thanks everyone!!!
Click to expand...
Click to collapse
Well.... Actually nandroid backup is better than titanium or other things in case you got softbrick after flashing.
Sent from my MB860 using xda premium
data works fine on stock gingerbread on the facinate, but when i installed ics the data stops working any help on this?
We need more info. What rom and your exact install procedure.
Sent from my SCH-I500 using Tapatalk
shelby04861 said:
We need more info. What rom and your exact install procedure.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
this!!
the device was bought and came with 2.3.5
plugged the device to the computer
opened odin
pit Atlas 2.2
pda powerwashed b3 ec09 modem
reboot to download again
flashed cwm4 recovery
reboot the phone and let it boot
shut off phone and enter recovery
flsah aokp ics build 39
(i have tried flashing build 2 first but it will never let me flash build 39 and i have to repeat the entire process to flash build 39 skipping build 2 of course)
and so data wont work with ics aokp or gummy
additional info: carrier is not in the us or canada, its on an island called guam and the carrier is it&e lol...
google ics 3g data fix.zip
er....
I hate to ask but can you provide a link? I searched and found nothing. there was something else though and it said To go #*#*4636*#*# and change it to cdma prl
http://dl.dropbox.com/u/59704791/Data_fix_ISC.zip
MultipleMonomials said:
http://dl.dropbox.com/u/59704791/Data_fix_ISC.zip
Click to expand...
Click to collapse
can you please link the thread you got this at? thanks
http://forums.androidcentral.com/verizon-fascinate-rooting-roms-hacks/171161-3g-data-patch.html
I'm having the same problem. My data works fine if I switch back to a gingerbread rom, but stops with any ICS rom. I've even tried to restore the APN's via APN backup and restore, but no luck.
Does anyone have a fascinate ICS rom working with MetroPCS internet yet?
stevebanks said:
I'm having the same problem. My data works fine if I switch back to a gingerbread rom, but stops with any ICS rom. I've even tried to restore the APN's via APN backup and restore, but no luck.
Does anyone have a fascinate ICS rom working with MetroPCS internet yet?
Click to expand...
Click to collapse
did u not read the posts above?
droidstyle said:
did u not read the posts above?
Click to expand...
Click to collapse
Yes, I read the post above, but wasn't sure if this pertained to MetroPCS too. I don't have 3g with Metro.
Also, how do I apply the patch. Do I have to push using ADB or RootExplorer?
stevebanks said:
Yes, I read the post above, but wasn't sure if this pertained to MetroPCS too. I don't have 3g with Metro.
Also, how do I apply the patch. Do I have to push using ADB or RootExplorer?
Click to expand...
Click to collapse
its a zip u flash in recovery
droidstyle said:
its a zip u flash in recovery
Click to expand...
Click to collapse
Awesome! It worked. I appreciate it man.
droidstyle said:
its a zip u flash in recovery
Click to expand...
Click to collapse
sir im having dell venue. apn works fine in gingerbread custom rom but
cant save apn in ics custom rom
help us
the thread is
http://forum.xda-developers.com/showthread.php?t=2002361
stevebanks said:
I'm having the same problem. My data works fine if I switch back to a gingerbread rom, but stops with any ICS rom. I've even tried to restore the APN's via APN backup and restore, but no luck.
Does anyone have a fascinate ICS rom working with MetroPCS internet yet?
Click to expand...
Click to collapse
ive noticed on the fascinate that apnbackup and restore doesnt do much for ics+ so theres a file that is in system/etc/apn-config.xml full of apn settings just add metropcs and ic&e's apns in there using the format, its all the apns that your cdma phone can use, then make into a flashable zip and it will be ready to re-flash everytime you switch roms. i have to do this for my fascinate to get it to work on straight talk lol
if i knew what the apn settings were for them i would make you a zip, ill look into it later tho
hey guys,
so after reading the CM9 install guide, looks like I need to flash the stock ICS first. I'm currently using MIUI 2.1.7 which is still gingerbread.
I went to the stock ICS firmwares:
http://forum.xda-developers.com/showthread.php?t=1544487
But didn't see any North American or Canada firmwares, does it matter if I get the Argentina one, or can anyone direct me to a North American version.
Another question is, after I flash the stock ICS, will I still have my root and CWM?
Thanks,
eclipse
eclipse245 said:
so after reading the CM9 install guide, looks like I need to flash the stock ICS first. I'm currently using MIUI 2.1.7 which is still gingerbread.
Click to expand...
Click to collapse
Incorrect, just flash cm9.
I can go from MIUI gingerbread, straight to the latest CM9?
So just follow the flashing instructions I guess, and skip all the other nonsense?
If you're flashing through CWM there is a long and complex process to flashing such a complicated ROM:
Step 1. Factory reset/ wipe cache/ wipe dalvik cache
Step 2. Flash CM9
EDIT: Remember to keep breathing whilst you do it, sometimes I need to focus so intently on the complex process I forget.
One more question, if I wanted to update CM9 via Rom Manager, to a newer nightly, would any data/apps/contacts be lost or reset, or is it just an update?
Nightlies are just an update, no need for a wipe.
eclipse245 said:
One more question, if I wanted to update CM9 via Rom Manager, to a newer nightly, would any data/apps/contacts be lost or reset, or is it just an update?
Click to expand...
Click to collapse
Don't use rom manager, I've been hearing bad things about it. Just use cwm recovery. And no data would be lost, just don't data wipe / factory reset in cwm recovery
Sent from my GT-I9100 using xda premium
Alright cool, worked fine
thanks a lot guys!
I have an s3 gt-i9300
I have stock 4.3 installed on my s3
Why is that whenever I install a custom rom whether it's cyanogenmod , omni rom or aosp rom I loose my GSM connectivity.
Somebody please help me in installing a cuatom rom
Sent from my GT-I9300 using XDA Free mobile app
abubakarsohail said:
I have an s3 gt-i9300
I have stock 4.3 installed on my s3
Why is that whenever I install a custom rom whether it's cyanogenmod , omni rom or aosp rom I loose my GSM connectivity.
Somebody please help me in installing a cuatom rom
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
screens, system version, which custom ROMs (versions).... without such basic info - sorry, but no one here is a magician
spamtrash said:
screens, system version, which custom ROMs (versions).... without such basic info - sorry, but no one here is a magician
Click to expand...
Click to collapse
Sorry
Well I tried the CM 11 installer and nightlies both version
I tried the latest build of omni rom
Herw are the screen shots
Sent from my GT-I9300 using XDA Free mobile app
Did your phone work normally on stock 4.3 or did you have to use patched modem and kernel to gain network?
Did the custom rom install a modem or use the existing?
Full wipe and factory reset before flashing?
boomboomer said:
Did your phone work normally on stock 4.3 or did you have to use patched modem and kernel to gain network?
Did the custom rom install a modem or use the existing?
Full wipe and factory reset before flashing?
Click to expand...
Click to collapse
Yes my phone works normal on stock 4.3 I didn't use any patched modem or kernel
Custom rom used the existing modem
Yes I did full wipe and factory reset before flashing
Anyone to help?????
Please!!!
Sent from my GT-I9300 using XDA Free mobile app
abubakarsohail said:
Anyone to help?????
Please!!!
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
I recommend installing latest PhilZ recovery then use the option in settings to install a new rom this wipes everything you need for a clean install then flash the rom in recovery don't use cm installer..
tallman43 said:
I recommend installing latest PhilZ recovery then use the option in settings to install a new rom this wipes everything you need for a clean install then flash the rom in recovery don't use cm installer..
Click to expand...
Click to collapse
I don't have a SD Card so where am I supposed to put the rom?
I guess full wipe will also delete the rom.
Also, should I root the device first?
abubakarsohail said:
I don't have a SD Card so where am I supposed to put the rom?
I guess full wipe will also delete the rom.
Also, should I root the device first?
Click to expand...
Click to collapse
If you don't have a ext Sd card don't try my suggestion! I would only ever advise a full wipe if you have a ext sd card just in case anything goes wrong plus like you said where would you put the rom. I would strongly suggest you getting a ext card no matter how small if you are flashing roms.
tallman43 said:
If you don't have a ext Sd card don't try my suggestion! I would only ever advise a full wipe if you have a ext sd card just in case anything goes wrong. I would strongly suggest you getting a ext card no matter how small if you are flashing roms.
Click to expand...
Click to collapse
Okay, I'll buy a SD Card, flash the ROM and report back.
tallman43 said:
If you don't have a ext Sd card don't try my suggestion! I would only ever advise a full wipe if you have a ext sd card just in case anything goes wrong plus like you said where would you put the rom. I would strongly suggest you getting a ext card no matter how small if you are flashing roms.
Click to expand...
Click to collapse
I did as you said but still no luck
abubakarsohail said:
I did as you said but still no luck
Click to expand...
Click to collapse
Very strangeGlad to see you got a a ext sd card this will save you a lot of trouble in the future..
The steps I would take now would be after you have installed your 4.4 rom boot it up then reboot into recovery and flash a separate modem you could use one >> https://mega.co.nz/#!PQZDiRYY!V3pk5H24zuhI4xmE-RvF5gRKJ9N4ECg9YqEg09neX84 << and see if that works.
Also did you backup your efs when you where on stock 4.3 if not flash stock then backup your efs then try the steps above....
tallman43 said:
Very strangeGlad to see you got a a ext sd card this will save you a lot of trouble in the future..
The steps I would take now would be after you have installed your 4.4 rom boot it up then reboot into recovery and flash a separate modem you could use one >> https://mega.co.nz/#!PQZDiRYY!V3pk5H24zuhI4xmE-RvF5gRKJ9N4ECg9YqEg09neX84 << and see if that works.
Also did you backup your efs when you where on stock 4.3 if not flash stock then backup your efs then try the steps above....
Click to expand...
Click to collapse
No, I didn't make a backup of efs
I also want to mention one thing
Currently, I have 4.1.2 installed on my s3
Since my network was not working so I flashed the stock rom
Should I make a backup of efs on 4.1.2 or should I upgrade to 4.3 and then make a backup of EFS?
abubakarsohail said:
No, I didn't make a backup of efs
I also want to mention one thing
Currently, I have 4.1.2 installed on my s3
Since my network was not working so I flashed the stock rom
Should I make a backup of efs on 4.1.2 or should I upgrade to 4.3 and then make a backup of EFS?
Click to expand...
Click to collapse
Now you have confused me even more! I thought you said in your previous post that you had connection on 4.3 stock rom if so why are you on 4.1.2 ?. Stock rom 4.3 is efs v2 and stock rom 4.1.2 is efs v1 if you have no connection on 4.3 then this is your problem you still have efs v1 which will not work on 4.3 or any of the newer roms please confirm that you have a signal on 4.3 stock rom.
tallman43 said:
Now you have confused me even more! I thought you said in your previous post that you had connection on 4.3 stock rom if so why are you on 4.1.2 ?. Stock rom 4.3 is efs v2 and stock rom 4.1.2 is efs v1 if you have no connection on 4.3 then this is your problem you still have efs v1 which will not work on 4.3 or any of the newer roms please confirm that you have a signal on 4.3 stock rom.
Click to expand...
Click to collapse
I don't know why but I get my connectivity on both 4.1.2 and 4.3 as well
If you want proof I can post screenshots
And yes I flashed the modem you gave me but it also didn't work
Screenshots attached
abubakarsohail said:
I don't know why but I get my connectivity on both 4.1.2 and 4.3 as well
If you want proof I can post screenshots
And yes I flashed the modem you gave me but it also didn't work
Screenshots attached
Click to expand...
Click to collapse
Ok that's good it means you are on v2 efs which is good..I just needed to confirm that you had v2 efs I thought you might have been on 4.1.2 because of no signal.
I must admit this is a strange one because the asop roms,omni roms etc don't change your baseband which can effect your signal.There is one more option you could try use this patched modem >> http://forum.xda-developers.com/gal...ck-firmware-i9300xxemg4-t2377731/post43946365 << by JustArchi look at post 15. Flash your rom then boot into it then reboot into recovery and then flash JustArchi modem see if that works.(Even though I don't think that is the problem)
Also your efs make sure you back it up preferably when you are on 4.3 stock rom.
tallman43 said:
Ok that's good it means you are on v2 efs which is good..I just needed to confirm that you had v2 efs I thought you might have been on 4.1.2 because of no signal.
I must admit this is a strange one because the asop roms,omni roms etc don't change your baseband which can effect your signal.There is one more option you could try use this patched modem >> http://forum.xda-developers.com/gal...ck-firmware-i9300xxemg4-t2377731/post43946365 << by JustArchi look at post 15. Flash your rom then boot into it then reboot into recovery and then flash JustArchi modem see if that works.(Even though I don't think that is the problem)
Also your efs make sure you back it up preferably when you are on 4.3 stock rom.
Click to expand...
Click to collapse
Off topic question
Will this modem get my network back if I flash 4.0.4 on my s3?
tallman43 said:
Ok that's good it means you are on v2 efs which is good..I just needed to confirm that you had v2 efs I thought you might have been on 4.1.2 because of no signal.
I must admit this is a strange one because the asop roms,omni roms etc don't change your baseband which can effect your signal.There is one more option you could try use this patched modem >> http://forum.xda-developers.com/gal...ck-firmware-i9300xxemg4-t2377731/post43946365 << by JustArchi look at post 15. Flash your rom then boot into it then reboot into recovery and then flash JustArchi modem see if that works.(Even though I don't think that is the problem)
Also your efs make sure you back it up preferably when you are on 4.3 stock rom.
Click to expand...
Click to collapse
I again did what you said but still no luck. This time I flashed cyanogenmod.
Looks like I will never be able to taste a cutom rom
abubakarsohail said:
I again did what you said but still no luck. This time I flashed cyanogenmod.
Looks like I will never be able to taste a cutom rom
Click to expand...
Click to collapse
It is strange not something I have come across before:crying: maybe somebody with a bit more knowledge might see your thread and help:good:As for the 4.0.4 rom you mentioned your efs which is v2 works on 4.3 and 4.1 not sure about 4.0.4 but I would strongly suggest keeping away from ics roms they have the sleep of death issue which is very bad news and you definitely don't want that...
tallman43 said:
It is strange not something I have come across before:crying: maybe somebody with a bit more knowledge might see your thread and help:good:As for the 4.0.4 rom you mentioned your efs which is v2 works on 4.3 and 4.1 not sure about 4.0.4 but I would strongly suggest keeping away from ics roms they have the sleep of death issue which is very bad news and you definitely don't want that...
Click to expand...
Click to collapse
Just want to add something
I used to install custom roms often. All of them worked perfectly fine
When I saw my flash counter it was 20+
So, I decided to use triangle away
Since then I am unable to flash any custom rom with working network successfully