[Q] Pseudo emergency - HTC EVO 3D

A friend of mine has an EVo V4G. He recently did the wire trick and while trying to flash the eng hboot to his device it just turned off. his hboot is 1.57.5757 he had TWRP installed and though roms would flash fine each time he would boot loop. It doesn't respond to any button combo nor does a charge light come on while plugged in. Any help would be greatly appreciated as he lives a Looong way from me and I can't exactly drive there. Troubleshooting via Google talk sucks plus I'm running out of answers

ian577416 said:
A friend of mine has an EVo V4G. He recently did the wire trick and while trying to flash the eng hboot to his device it just turned off. his hboot is 1.57.5757 he had TWRP installed and though roms would flash fine each time he would boot loop. It doesn't respond to any button combo nor does a charge light come on while plugged in. Any help would be greatly appreciated as he lives a Looong way from me and I can't exactly drive there. Troubleshooting via Google talk sucks plus I'm running out of answers
Click to expand...
Click to collapse
It's really hard to tell with that much information, especially since he can't turn the phone on to get more data, but if his bootloader flash got interrupted somehow he might have bricked the phone. This thread is specifically about how to "unbrick" after that happens and he should probably read at least the OP to see if that fits his situation.
One thing he can try that has worked for some is to charge it on the A/C adapter overnight and see if he can start the bootloader in the morning after removing/replacing the battery.
ramjet73

ramjet73 said:
It's really hard to tell with that much information, especially since he can't turn the phone on to get more data, but if his bootloader flash got interrupted somehow he might have bricked the phone. This thread is specifically about how to "unbrick" after that happens and he should probably read at least the OP to see if that fits his situation.
One thing he can try that has worked for some is to charge it on the A/C adapter overnight and see if he can start the bootloader in the morning after removing/replacing the battery.
ramjet73
Click to expand...
Click to collapse
That's essentially what I told him to do. The only issue is that the op states it is only for s-on devices. He had successfully flashed juniperbear s-off. That's what worries me. However thanks man! Mind if I follow up with you tomorrow?
Sent from my Nexus 4 using Tapatalk 2

ian577416 said:
That's essentially what I told him to do. Thanks man! Mind if I follow up with you tomorrow?
Click to expand...
Click to collapse
Just post here. Other people might have ideas as well depending on what he finds after he's charged it for a while.
ramjet73

Related

[Q] Won't Charge When Stuck In HBoot

Every time i try to flash something to unstick my butt from HBOOT it says and i quote:
*** Security Warning ***
MECHA XD SHIP S-ON
HBOOT-0.95.0000
MICROP-/
RADIO- 1.02.00.0103_2r
eMMC-boot
Dec 16 2010,22:29:58
HBOOT
SD CHECKING ...
Loading...[PG05MIG.zip]
Battery voltage is too low!
Please change a battery...
[Power] -> continue
I swear it says please change a battery. I got stuck in hboot when i tryed to unroot from DasBamf 2.0 GingerBread. I flashed the downgradepgi05mg found in the unrevoked 3 click root method folder and now i cant flash anything because it wont charge the battery. Should i buy a more powerful usb charger like the one for the iPad or should i just keep asking for suggestings? Im guessing it wont charge since it can barely keep up with the screen being on full brightness
Try charging with the phone off for a couple hours. BUT, if you have that security warning you have bigger problems. I don't know how to explain to you how to fix it for sure but don't freak out. I would let it charge turned off for at least a couple hours and then jump on andirc chat in the #thunderbolt room and look for someone to walk you through it. I believe it happens when you try to flash a signed RUU that is older than the version you are currently running. Like I said tho I don't know the steps exactly to fix that but i THINK you can. Link to andirc thunderbolt chat is in the sticky root thread.
Sent from my HTC Thunderbolt
mine used to do that, id just keep trying to restart the phone til it powered up. make sure the img file is not on the sdcard
JBO1018 said:
Try charging with the phone off for a couple hours. BUT, if you have that security warning you have bigger problems. I don't know how to explain to you how to fix it for sure but don't freak out. I would let it charge turned off for at least a couple hours and then jump on andirc chat in the #thunderbolt room and look for someone to walk you through it. I believe it happens when you try to flash a signed RUU that is older than the version you are currently running. Like I said tho I don't know the steps exactly to fix that but i THINK you can. Link to andirc thunderbolt chat is in the sticky root thread.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
thats exactly wut i did, you know the old ruu thing, it said main version is older and i started freakin out, i almost had a scaregasm! i found a newer ruu and i cant flash it thanks to this problem.it wont charge because the second i try to charge it, it turns on automatically, it would normally take me the clockworkmod recovery but it takes me to the hboot crap, i just want to solve the charging problem, no suggestions on how to unstick my bottom from hboot please.
Find someone with a tbolt, use their phone to charge your battery or buy a dock with spare battery charger.
Yeah, you will need an external means of charging the battery. This thread ->
http://forum.xda-developers.com/showthread.php?t=1008824
Explains the security warning and how to fix it in some cases, BUT it depends on what RUU you flashed. What version number was the RUU that caused all of this?
Sent from my HTC Thunderbolt
bthomp21 said:
Find someone with a tbolt, use their phone to charge your battery or buy a dock with spare battery charger.
Click to expand...
Click to collapse
yer a genious, but i know no one with a tbolt and *GASP* ....... i will just buy an extra battery, they usually have about half charge and its not like i didnt need one in the first place, hopefully i can fix my phone. do you know how bad it is with all the annoying sprint evo commercials and the iphone comercials and the tablet commercials, and no calling? didnt tghink so
You are having tbolt withdraws. Step back, deep breath. It'll be ok. Go to Verizon, I'm sure they'd even let you do it there...the commercials mean nothing to me because I know Sprint and ATT are full of ****.
XxJakems28xX said:
I swear it says please change a battery. I got stuck in hboot when i tryed to unroot from DasBamf 2.0 GingerBread. I flashed the downgradepgi05mg found in the unrevoked 3 click root method folder and now i cant flash anything because it wont charge the battery. Should i buy a more powerful usb charger like the one for the iPad or should i just keep asking for suggestings? Im guessing it wont charge since it can barely keep up with the screen being on full brightness
Click to expand...
Click to collapse
uhmmmm pretty sure unrevoked hasn't released anything for the thunderbolt yet.
So I would assume your flashing the wrong file. Or didn't follow the unroot guide in XDA dev.

[Q] Have I killed my Flyer?

I installed an incorrect Rom over and Incorrect Bootloader and it resulted in the Flyer freezing and not being able to do anything. I let the battery drain down completely and when I went to charge it up again all it does is the red light flashes on and off which I guess means it's not charging.
I can get into the bootloader by holding power and the bottom volume button but it says there is not enough battery power to do anything. Is there anything I can do?
I tried putting the PG41IMG.ZIP file onto the SD card and booting but that doesn't seem to have achieved anything either? Is there anything I can do I'm at my wits end with this now.
Any help appreciated. Thank you.
Wait for help from Globaltron on this forum. He's seen it all before. He can get you on IRC and walk you through unbrick procedures.
In the main time search through his treads on reverting to stock.
Leave your device on the HTC wall wart charger. When the boot image and recovery are messed up, charging is affected and will be very slow or possibly not work at all.
DigitalMD said:
Wait for help from Globaltron on this forum. He's seen it all before. He can get you on IRC and walk you through unbrick procedures.
In the main time search through his treads on reverting to stock.
Leave your device on the HTC wall wart charger. When the boot image and recovery are messed up, charging is affected and will be very slow or possibly not work at all.
Click to expand...
Click to collapse
Okay, thank you
Install teamviewer and send me a PM with the details. I'll connect, check current status and guide you from there.
Thanks Globatron, However I have finally managed to fix this problem.
I left the Flyer plugged into the Wall even though it was flashing to show it wasn't charging for about 24 hours, the light still continued to flash however when I booted into Fastboot and tried to flash a honeycomb RUU.exe it let me do it this time without the 'Not enough battery power' message that I had been getting.
Lesson learned, I shall not fiddle anymore.
JussieXo said:
Thanks Globatron, However I have finally managed to fix this problem.
I left the Flyer plugged into the Wall even though it was flashing to show it wasn't charging for about 24 hours, the light still continued to flash however when I booted into Fastboot and tried to flash a honeycomb RUU.exe it let me do it this time without the 'Not enough battery power' message that I had been getting.
Lesson learned, I shall not fiddle anymore.
Click to expand...
Click to collapse
That's great news. Don't worry about fiddling with it, just be sure you have it fully charged and that you know the full procedure for what you need to do.
Same situation
I keep getting the low battery error and am stuck in the same state you were. I let the damn thing charge for two days and the LED was green. The battery is as charged as it is gonna get.
I tried on multiple machines, multiple VM's, and same result.
The RAW RUU won't load with fastboot.
Question, what state did you have the view in when you ran the RUU? What I mean is were you at the boot menu in fastboot mode or what?
HTC Flyer won't boot completely, please help!
DigitalMD said:
Wait for help from Globaltron on this forum. He's seen it all before. He can get you on IRC and walk you through unbrick procedures.
In the main time search through his treads on reverting to stock.
Leave your device on the HTC wall wart charger. When the boot image and recovery are messed up, charging is affected and will be very slow or possibly not work at all.
Click to expand...
Click to collapse
globatron said:
Install teamviewer and send me a PM with the details. I'll connect, check current status and guide you from there.
Click to expand...
Click to collapse
I have a similar situation to JussieXo. I own an HTC Flyer and recently purchased a 2nd used flyer for a birthday present for my son. The used flyer was running CM9. I thought "no problem", I rooted my flyer I will just use the RUU and reinstall the stock software. I started with a full charge battery. All didn't go well, after several hours and trying many ideas on several forums I can only boot to the white HTC screen. I have now drained the battery to the point that it would not turn back on last night. This morning it would come back on and the red power light has stopped flashing and remains solid (good news!). I have left it powered off and recharging for now. My question is can you help me get past the white HTC screen. I have read this and several other posts. I see you wanted JussieXo to download teamviewer...I have done this, if you could PLEASE help me get this working it will make one little boy and his mother very happy for his birhtday.
It is currenlty rooted using revolutionary with S-off, hboot is 6.11.1111. When I am in the HBOOT menu and I select recovery it will only load to the white HTC screen.
Try following the Globatron instructions to go from HC hboot back to GB hboot. If you had cm9 I think that was on the HC hboot and you need to be back on GB to run the RUU files to return to stock GB.
http://forum.xda-developers.com/showthread.php?p=19607833
Good luck
Sent from my HTC Flyer P510e using Tapatalk
schalmers said:
Try following the Globatron instructions to go from HC hboot back to GB hboot. If you had cm9 I think that was on the HC hboot and you need to be back on GB to run the RUU files to return to stock GB.
http://forum.xda-developers.com/showthread.php?p=19607833
Good luck
Sent from my HTC Flyer P510e using Tapatalk
Click to expand...
Click to collapse
Thanks schalmers, I will look at this. I am currently leaving it on the charger powered off. The LED has stopped flashing, but it is still amber/red. I am hoping I can get a full charge with it again. I read somewhere that it charges very slowly (if it will at all) in this state. Keeping my fingers crossed.
WoooHooo...thank you!!!
schalmers said:
Try following the Globatron instructions to go from HC hboot back to GB hboot. If you had cm9 I think that was on the HC hboot and you need to be back on GB to run the RUU files to return to stock GB.
http://forum.xda-developers.com/showthread.php?p=19607833
Good luck
Sent from my HTC Flyer P510e using Tapatalk
Click to expand...
Click to collapse
A million thanks to schalmers and Globaltron...I followed your directions and it worked!! My son will be very happy on his b-day this Wednesday, as will I!:laugh:
Glad it worked for you. Hope your son enjoys
Sent from my LT26i using Tapatalk

Downgrading from 1.50 to 1.40...Can't Brick Phone..Help?

I'm trying to brick my device so i can downgrade to 1.40. Everything is fine up until the point where i have to pull the battery out and run off AC power without battery. When i pull out the battery the phone stays on like it is supposed to, but when i press volume + button to start update the phone immediately turns off.
I relocked my device and am running this stock rom. If anyone can offer some advice it would be greatly appreciated
Thank you
Are you using the actual HTC charger that came with the phone? I've read here on XDA that the stock HTC charger puts out a little more power than normal chargers. Also, you can't use USB via your PC.
thefsfempire said:
Are you using the actual HTC charger that came with the phone? I've read here on XDA that the stock HTC charger puts out a little more power than normal chargers. Also, you can't use USB via your PC.
Click to expand...
Click to collapse
Yep, using the one that came with the phone and i'm plugged into the wall. I even tried a couple different outlets. Do i need to have a certain rom installed?
jeffhbo said:
Yep, using the one that came with the phone and i'm plugged into the wall. I even tried a couple different outlets. Do i need to have a certain rom installed?
Click to expand...
Click to collapse
That shouldn't matter since we're dealing with just the bootloader. I'm not sure which guide you're using (if there's even more than one now) but here is the link I followed: http://forum.xda-developers.com/showthread.php?t=1547695
Make sure you boot recovery, remove back cover, plug in phone then pull battery when it says.
Yesss this sh*t is impossible.! I actually got pissed off cuz I COULDNT brick the damn phone lol
Sent from my PG86100 using XDA
ognimnella said:
Yesss this sh*t is impossible.! I actually got pissed off cuz I COULDNT brick the damn phone lol
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
I know right! Never thought I'd be mad cause i couldn't brick my phone. Next time someone says they're scared about rooting cause they dont wanna break their phone, I'll tell them they couldn't do it if they tried.
I think I'm going to go back to HTC unlock. The only reason I decided to downgrade my phone in the first place was because i wanted to flash Newtoroot's rls3 and was not able to get it running without losing service. At this point I think I can get that rom to work on 1.50 before i can get this SOB to brick, much less get through the rest of this damn process. If not, I'll just go back to rls1, cause i had that version running perfectly (bugs listed in OP excluded).
Good luck to anyone who's trying to do this...may you have better luck than I did lol.
Sincerely,
J
thefsfempire said:
That shouldn't matter since we're dealing with just the bootloader. I'm not sure which guide you're using (if there's even more than one now) but here is the link I followed: http://forum.xda-developers.com/showthread.php?t=1547695
Make sure you boot recovery, remove back cover, plug in phone then pull battery when it says.
Click to expand...
Click to collapse
I had this problem where my phone would turn off as well..I was using a stock htc charger that came with the E3d. What I did was hold my charger steady because if I moved it too much the charge would leave. No I didnt have a shortage in my charger but it just read like that in the laptop. Probably because being plugged into the laptop or cpu it doesnt feed off enough voltage. Hope this works for you.

[Q] Need Help! Must get working for tomorrow

Ok I did my first root and install for my rezound. I messed with rooting more back when I had my TB and Eris but nothing more than doing some walk-throughs getting some new roms and such. I got Nils business sense 3.6 working great and what a great ROM! However I ran into a (in my head) major problem. With the knowledge of some people here I'm sure 30 minutes with my phone would get it going, but alas I am a noob, but good at following instructions. I'm good with all things tech until we start talking cmd and coding . Build a comp, fix a computer, OCing that kind of thing.
Anyhow, this morning I woke up to a dead phone forgot to charge, no biggy, I put in a new battery and booted...then got stuck at HTC white screen. So I boot into bootloader and all i get is the IMG updating thing and only an option to reboot. Now I'm in a loop. So I take the PHIMG out of root folder and try to boot into recovery and it goes to the white HTC screen with the small loading bar to a black screen that never changes. Cant get into recovery. Next step, using the Hasoon all in one toolkit (though I know I could use cmd myself, this makes my life easier as it accomplishes the same goal) I try to reflash recovery as recommended by someone here. No change. Alas I know my battery is probably getting low and it does NOT charge while turned off!! Lame...So any help would be greatly appreciated!
volcaicstrad37 said:
Ok I did my first root and install for my rezound. I messed with rooting more back when I had my TB and Eris but nothing more than doing some walk-throughs getting some new roms and such. I got Nils business sense 3.6 working great and what a great ROM! However I ran into a (in my head) major problem. With the knowledge of some people here I'm sure 30 minutes with my phone would get it going, but alas I am a noob, but good at following instructions. I'm good with all things tech until we start talking cmd and coding . Build a comp, fix a computer, OCing that kind of thing.
Anyhow, this morning I woke up to a dead phone forgot to charge, no biggy, I put in a new battery and booted...then got stuck at HTC white screen. So I boot into bootloader and all i get is the IMG updating thing and only an option to reboot. Now I'm in a loop. So I take the PHIMG out of root folder and try to boot into recovery and it goes to the white HTC screen with the small loading bar to a black screen that never changes. Cant get into recovery. Next step, using the Hasoon all in one toolkit (though I know I could use cmd myself, this makes my life easier as it accomplishes the same goal) I try to reflash recovery as recommended by someone here. No change. Alas I know my battery is probably getting low and it does NOT charge while turned off!! Lame...So any help would be greatly appreciated!
Click to expand...
Click to collapse
You could download and install the latest global RUU. Rename it to PH98IMG.zip and place it on root of SD. Make sure if your S-On to re lock your bootloader. Also stay away from CWM recovery, Amon Ra or TWRP is your best recoveries of choice.
Samsung Galaxy S3
Trying to do what is suggested but it seems my phone is too dead to boot into hboot, I cannot hold volume down and power to get there when plugged into the computer either.
volcaicstrad37 said:
Trying to do what is suggested but it seems my phone is too dead to boot into hboot, I cannot hold volume down and power to get there when plugged into the computer either.
Click to expand...
Click to collapse
Your going to have to pop in a new battery or find a way to charge your battery externally.
Samsung Galaxy S3
luis86dr said:
Your going to have to pop in a new battery or find a way to charge your battery externally.
Samsung Galaxy S3
Click to expand...
Click to collapse
I was afraid of that...As I look at my desk with 2 OEM batteries and an extended...all dead... :silly:
volcaicstrad37 said:
I was afraid of that...As I look at my desk with 2 OEM batteries and an extended...all dead... :silly:
Click to expand...
Click to collapse
It happens lol. Just stay away from CWM recovery in the future. It doesn't allow you to charge your device when powered off.
Also, I think there is a thread someone made on how to charge your battery externally. Might have to dig it up in the general section.
Samsung Galaxy S3
luis86dr said:
It happens lol. Just stay away from CWM recovery in the future. It doesn't allow you to charge your device when powered off.
Click to expand...
Click to collapse
I am not sure if you ever go into the Development thread but http://forum.xda-developers.com/showthread.php?t=1914215
A great tool to keep around http://www.amazon.com/eForCity-Batt...50853249&sr=8-14&keywords=htc+rezound+charger
Flyhalf205 said:
I am not sure if you ever go into the Development thread but http://forum.xda-developers.com/showthread.php?t=1914215
Click to expand...
Click to collapse
Yeah, I was going to post this:
http://forum.xda-developers.com/showthread.php?t=1711408
Just dug that up, you can use CWM Touch as well. Either or should set you straight.
Samsung Galaxy S3
I actually used the Amon recovery I did hear issues with CWM as I was doing research. So am I to assume amon has similar issues to CMW then?
Flyhalf205 said:
I am not sure if you ever go into the Development thread but http://forum.xda-developers.com/showthread.php?t=1914215
A great tool to keep around http://www.amazon.com/eForCity-Batt...50853249&sr=8-14&keywords=htc+rezound+charger
Click to expand...
Click to collapse
Just placed an order. Thanks, I was hoping to find one in a store around here to get up and running this week, but I guess I'll be out of commission for a couple days.
volcaicstrad37 said:
Just placed an order. Thanks, I was hoping to find one in a store around here to get up and running this week, but I guess I'll be out of commission for a couple days.
Click to expand...
Click to collapse
Amon recovery does not have the battery charging issue. I don't know if you ordered the battery already. But have you tried charging all the batteries?
jdm2008315 said:
Amon recovery does not have the battery charging issue. I don't know if you ordered the battery already. But have you tried charging all the batteries?
Click to expand...
Click to collapse
Yeah I've tried all three with 2 different chargers.

HTC EVO 3D won't turn on at all!!

I just bought an HTC 3D evo off craigslist, the seller said that he loaded the wrong ROM into it, he had android 4.0, tried to upgrade to 4.1.
I don't know if it is rooted or not, doesn't turn on at all (nothing happens, light, vibration, etc), i tried removing-the-battery trick, didn't work. I just want to load a new ROM into it so i can get it working again..
How do i do that?
Thanks.
Does the small led come on when plugged into a charger? Have you tried to hold down the volume down button and power button down at the same time to access the bootloader, also please specify if your phone is gsm or cdma.
(Don't ask me for help as I couldn't care if your phone explodes, eh!
flashallthetime said:
Does the small led come on when plugged into a charger? Have you tried to hold down the volume down button and power button down at the same time to access the bootloader, also please specify if your phone is gsm or cdma.
(Don't ask me for help as I couldn't care if your phone explodes, eh!
Click to expand...
Click to collapse
the small led light does not turn on when pressing the power button (no signs of life at all!), i tried to reset (power button+volume down) it but nothing happens and it is a GSM phone.
Looks like your friend hoodwinked you bro. It sounds like he gave you a bricked phone. Unfortunately if your not able to access bootloader then its a paper weight now.
Jsparta26 said:
Looks like your friend hoodwinked you bro. It sounds like he gave you a bricked phone. Unfortunately if your not able to access bootloader then its a paper weight now.
Click to expand...
Click to collapse
Can't i just install another firmware using my pc? using something like flashtool for Xperia, for HTC?
looooboooo said:
Can't i just install another firmware using my pc? using something like flashtool for Xperia, for HTC?
Click to expand...
Click to collapse
As I have said, you need to be able to boot into bootloader mode to flash firmware. Whoever sold you that phone didn't tell you he hard bricked the phone in the process. The hboot had to have gottened corrupted. That's why you can't turn it on.
Jsparta26 said:
As I have said, you need to be able to boot into bootloader mode to flash firmware. Whoever sold you that phone didn't tell you he hard bricked the phone in the process. The hboot had to have gottened corrupted. That's why you can't turn it on.
Click to expand...
Click to collapse
How can i get it to boot into bootloader using adb reboot?
looooboooo said:
How can i get it to boot into bootloader using adb reboot?
Click to expand...
Click to collapse
Go ahead and give it a shot. Try adb reboot bootoader.
Jsparta26 said:
Go ahead and give it a shot. Try adb reboot bootoader.
Click to expand...
Click to collapse
How do i do that exactely? plz help me
looooboooo said:
How do i do that exactely? plz help me
Click to expand...
Click to collapse
Here's a tutorial that you might find useful in helping you set up adb http://forum.xda-developers.com/showthread.php?t=1751439.
Now do not take this the wrong way, you should listen to what I'm telling about your phone instead of ignoring me and trying to prove me wrong. Especially since I'm educating you on adb. I gave you that link so I dont have to explain how to set adb up. You have to be able to access bootloader, recovery or have phone completely on to run adb. In the end you will realize what I have told you. The person who sold it to you screwed you over. Your phone is completely bricked. Truly bricked. Please correct me if I'm wrong. I'm always open to learn new things.
I would definitely concur with Jsparta26, you unfortunately bought your phone from a unscrupulous, deceitful azz wipe.
(Don't ask me for help as I couldn't care if your phone explodes, eh!
looooboooo said:
I just bought an HTC 3D evo off craigslist, the seller said that he loaded the wrong ROM into it, he had android 4.0, tried to upgrade to 4.1.
I don't know if it is rooted or not, doesn't turn on at all (nothing happens, light, vibration, etc), i tried removing-the-battery trick, didn't work. I just want to load a new ROM into it so i can get it working again..
How do i do that?
Thanks.
Click to expand...
Click to collapse
I read your problem and read through the other suggestions, It does sound bricked but have you tried a different battery?, I had a battery one time that once it went completly dead the phone would not charge it, I had to charge it though an external charger, once it had some juice in it it would charge fine with the phone. All i am saying is make sure it is not something as simple as a bad battery before you decide to use it as a paperweight. If you do get it to turn on, let me know and I can help you get it working again.
mcerk02 said:
I read your problem and read through the other suggestions, It does sound bricked but have you tried a different battery?, I had a battery one time that once it went completly dead the phone would not charge it, I had to charge it though an external charger, once it had some juice in it it would charge fine with the phone. All i am saying is make sure it is not something as simple as a bad battery before you decide to use it as a paperweight. If you do get it to turn on, let me know and I can help you get it working again.[/
God I'm catching one of my migraines again ugh
Edit: my bad I guess you read the posts. He wouldn't need anymore help seeing how his main concern was getting his phone turned on.
Click to expand...
Click to collapse
Yeaa ur phones bricked lol....I bought a faulty HTC sensation 4G off of eBay nd when it came it would not charge ....then I connected it to my laptop nd came up as qhsusb_dload soo yea haha -_-...I would just return it to the seller as theres nothin u can do. Best of luck man hope they return ur money :thumbup::thumbup:
Sent from my LG-P925 using xda premium
Thanks everyone wholeheartedly! i was abale to pay a guy 40 bucks to fix it using his jtag Apparentely he only had to rewrite the boot.
So for everyone having the same problem, JTag is your solution nothing else
Juste a small question, i have viper 3d rom on it and i was wondering is it the best ?
looooboooo said:
Thanks everyone wholeheartedly! i was abale to pay a guy 40 bucks to fix it using his jtag Apparentely he only had to rewrite the boot.
So for everyone having the same problem, JTag is your solution nothing else
Juste a small question, i have viper 3d rom on it and i was wondering is it the best ?
Click to expand...
Click to collapse
Its like I said. Your hboot was corrupted. That's great you got your phone booted back up.
Now as for viper 3d there's no "best" ROM. Its a subjective topic so its basically not allowed. I can tell you its very stable, has lots of tweaks, and highly customizable. Only thing is that is doesn't have 4g or 3d. And it works on any hboot.
Jsparta26 said:
Its like I said. Your hboot was corrupted. That's great you got your phone booted back up.
Now as for viper 3d there's no "best" ROM. Its a subjective topic so its basically not allowed. I can tell you its very stable, has lots of tweaks, and highly customizable. Only thing is that is doesn't have 4g or 3d. And it works on any hboot.
Click to expand...
Click to collapse
here we go again! the phone is rebooting periodically now... wth do i do? as for viper , i want a rom that has 3d and is as good as viper, thank u!
The only roms with fully working 3d camera are sense 3.6 roms
(Don't ask me for help as I couldn't care if your phone explodes, eh!
brick fixable
I had the same thing going on w/my phone. Problem was: the hboot was corrupted.. The only way to fix this is with linux.. I don't recall the exact files or command that I ran but if you search you will find them and it will bring your phone back to life.. NOTE: every thread i found had old information with older hboots which have different filenames.. Once you find the information on how to fix your hboot aka "brick" you simply need to get your exact hboot file and replace (flash) it through linux.. there is even an ubuntu cd you can download and boot into so that you don't have to install Linux.. I'd give you more info, but I'm at work right now and don't have time to research it. Good luck..!!
looooboooo said:
I just bought an HTC 3D evo off craigslist, the seller said that he loaded the wrong ROM into it, he had android 4.0, tried to upgrade to 4.1.
I don't know if it is rooted or not, doesn't turn on at all (nothing happens, light, vibration, etc), i tried removing-the-battery trick, didn't work. I just want to load a new ROM into it so i can get it working again..
How do i do that?
Thanks.
Click to expand...
Click to collapse
today i have a problem with my evo. i loss my phone in my car, and at night was frost, - 20 C.
half of day phone dosnt power on. my first opinion was that the battery died, but when i measured voltage, i see 3.75V, thats normal for X-Polimer Battery. after i Inserting the battery at her place, and press power button, phone turn on
i dont know, may be i had to remove the battery for a long time, or during this time dry condensate, after frost.

Categories

Resources