Found these on another board, these are:
sk17_xperia_mini_pro-1251-8389_Schematics-electrical.pdf
sk17_xperia_mini_pro-1251-8388_Component_Replacement-electrical-rev3.pdf
sk17_xperia_mini_pro-1251-8382_Working_Instructions-mechanical-rev1.pdf
Oh and there's also the fabulous iFixit guide:
http://www.ifixit.com/Teardown/Sony+Ericsson+Xperia+Mini+Pro+SK17i+Teardown
Now where do I get these damned black screws? Why the heck don't they just use standardized components
anyway on to replace smashed screen for THIRD time, GEEEE :cyclops:
eMPee584 said:
Found these on another board, these are:
sk17_xperia_mini_pro-1251-8389_Schematics-electrical.pdf
sk17_xperia_mini_pro-1251-8388_Component_Replacement-electrical-rev3.pdf
sk17_xperia_mini_pro-1251-8382_Working_Instructions-mechanical-rev1.pdf
Oh and there's also the fabulous iFixit guide:
http://www.ifixit.com/Teardown/Sony+Ericsson+Xperia+Mini+Pro+SK17i+Teardown
Now where do I get these damned black screws? Why the heck don't they just use standardized components
anyway on to replace smashed screen for THIRD time, GEEEE :cyclops:
Click to expand...
Click to collapse
As far as I know you have to buy the components you need on ebay...
mihahn said:
As far as I know you have to buy the components you need on ebay...
Click to expand...
Click to collapse
Yes indeed :good: thanks for reminding me :highfive:
@everyone: please, just before pressing that shiny and very attractive submit button, ask yourself:
Is what you have written worthy of posting?
Does it create VALUE* - or is it mere NOISE?
Can the amount of quoted text be reduced some more?
*increasing your postcount does not count
eMPee584 said:
Yes indeed :good: thanks for reminding me :highfive:
@everyone: please, just before pressing that shiny and very attractive submit button, ask yourself:
Is what you have written worthy of posting?
Does it create VALUE* - or is it mere NOISE?
Can the amount of quoted text be reduced some more?
*increasing your postcount does not count
Click to expand...
Click to collapse
Er. . . What you saying is you can't find those stuff you want on ebay?
.:goutham:.
gouthamthemostwanted said:
Er. . . What you saying is you can't find those stuff you want on ebay?
Click to expand...
Click to collapse
Got the screen, can't find the screws. Nevermind - that was off-topic & sorry for bringing it up :angel:
But, I don't understand why you replied like that to mihahn's reply? he was just helping you and that's how you reply? If you already looked in eBay you could've just replied that you did look and it's not there. People here have no compulsion to help others but we voluntarily do because we love to help others and that's certainly not how you reply.
.:goutham:.
eMPee584 said:
Yes indeed :good: thanks for reminding me :highfive:
@everyone: please, just before pressing that shiny and very attractive submit button, ask yourself:
Is what you have written worthy of posting?
Does it create VALUE* - or is it mere NOISE?
Can the amount of quoted text be reduced some more?
*increasing your postcount does not count
Click to expand...
Click to collapse
Man I think I know how to make posts, but if you ask "where do I get these damned black screws?" and there were some ppl who found them on ebay, I just let you know. Maybe you could just tell us in your first post what exactly you have and what you need, where you looked etc.
Thx @gouthamthemostwanted, that's what I thought :good:
gouthamthemostwanted said:
But, I don't understand why you replied like that to mihahn's reply? he was just helping you and that's how you reply?
Click to expand...
Click to collapse
Yes, you're probably right and I'm sorry. I didn't look back at what I posted before replying, I had all forgotten about me even mentioning the screws and was in an annoyed mood because too many people keep posting low-content, off-topic comments, cluttering the forum beyond usefulness. Seems it is beyond my abilities to change that, or I might even have a totally wrong perception of this. I'm back to lurking in the dark silently.
mihahn said:
but if you ask "where do I get these damned black screws?"
Click to expand...
Click to collapse
..that wasn't *meant* as a question, rather just grumbling about it. And *of course* I thoroughly scoured the web before that. Nevermind, sorry. Let's move on
eMPee584 said:
Yes, you're probably right and I'm sorry. I didn't look back at what I posted before replying, I had all forgotten about me even mentioning the screws and was in an annoyed mood because too many people keep posting low-content, off-topic comments, cluttering the forum beyond usefulness. Seems it is beyond my abilities to change that, or I might even have a totally wrong perception of this. I'm back to lurking in the dark silently.
Click to expand...
Click to collapse
No of course it's great to see you in the forums, maybe we've just misunderstood something
Sorry, but if you (we) can't find them on ebay, I don't know where to get them. Usually most people don't need these screws...
//I know posting should be English, but just that I understand it right:
//Also es fehlen nur die schwarzen Schrauben für innen? Und mehr nicht? (So only the black screws are missing? Nothing else?)
//Sind die verloren gegangen oder wozu? (Have you lost them or why do you need them?)
You don't have to lurke in the dark. Just be polite and it's good to see you apologize for your mistakes (trust me, not many people do that) You are always encouraged to ask doubts and post useful information! :thumbup:
.:goutham:.
remove the touch(that wont work) from lcd minipro
Hello my xperia mini pro's touch dont working,
I open and I dont know how to remove the LCD from the glass touch screen, i need to use something in special? i dont wanna broke the lcd.
Can anyone help me with this?? maybe I can fix the touch testing one IC of the touch???
Thks, sorry for my english and novate known
eMPee584 said:
Found these on another board, these are:
sk17_xperia_mini_pro-1251-8389_Schematics-electrical.pdf
sk17_xperia_mini_pro-1251-8388_Component_Replacement-electrical-rev3.pdf
sk17_xperia_mini_pro-1251-8382_Working_Instructions-mechanical-rev1.pdf
Oh and there's also the fabulous iFixit guide:
http://www.ifixit.com/Teardown/Sony+Ericsson+Xperia+Mini+Pro+SK17i+Teardown
Now where do I get these damned black screws? Why the heck don't they just use standardized components
anyway on to replace smashed screen for THIRD time, GEEEE :cyclops:
Click to expand...
Click to collapse
Hertz23 said:
how to remove the LCD from the glass touch screen
Click to expand...
Click to collapse
Never buy only a replacement digitizer, it's very difficult (nearly impossible) to separate without breaking LCD: https://www.google.de/search?q=separate+lcd+digitizer
Better buy a complete lcd + touch digitizer "assembly", they have become quite cheap (starting from 15$/€):
www.aliexpress.com/wholesale?Search...e=15&maxPrice=30&SortType=price_asc&isRtl=yes
Pretty cool to have that
Thanks !
thks
eMPee584 said:
Never buy only a replacement digitizer, it's very difficult (nearly impossible) to separate without breaking LCD: https://www.google.de/search?q=separate+lcd+digitizer
Better buy a complete lcd + touch digitizer "assembly", they have become quite cheap (starting from 15$/€):
www.aliexpress.com/wholesale?Search...e=15&maxPrice=30&SortType=price_asc&isRtl=yes
Click to expand...
Click to collapse
thks my friend, i will buy one of these.
but i'm little curious. Apparently the display is ok, just the touch doesn't work. I've noticed that the screen is "transpiring" too much moisture and some screws and springs were rusting. Has anyone tried to find out why the touch fails along the time? its maybe a CI problem or umidity
Hertz23 said:
I've noticed that the screen is "transpiring" too much moisture and some screws and springs were rusting.
Click to expand...
Click to collapse
Well humidity becomes a problem especially when the device temperature is much lower than room temperature (like when coming in from winter/snow ) because the air surrounding the device surfaces cools down and water condenses, even on the inside.. it happens with watches, too..
Or you (or someone close to you) might have dropped it into liquid (toilet?) when you were very drunk
in that case, take out battery IMMEDIATELY, dry clean with a cloth, carefully shake out remaining fluid, then put f.e. into a bowl of dry rice and wait at least 24 hours before trying to power it up..
Parts Placement
eMPee584 said:
Found these on another board, these are:
sk17_xperia_mini_pro-1251-8389_Schematics-electrical.pdf
sk17_xperia_mini_pro-1251-8388_Component_Replacement-electrical-rev3.pdf
sk17_xperia_mini_pro-1251-8382_Working_Instructions-mechanical-rev1.pdf
Click to expand...
Click to collapse
First of all, thanks for uploading these gems! :good:
This thread is a bit old already but I just unearthed my old SK17i while I was rummaging through my stuff. It got stashed away when it suddenly shutdown while it was charging. Checking, its battery terminals were shorted. Something gave way.
Perhaps you have a parts placement file lurking somewhere? I've tried our friend Google but she came empty-handed.
drkdoesxda said:
Perhaps you have a parts placement file lurking somewhere?
Click to expand...
Click to collapse
uhhm sorry, only the ones I uploaded.. Maybe just take it to your nearest repair cafe for help?
I have still like three or four sk17s here with various states of brokenness (screen, plugs, buttons, speaker...)
It was a really usable device, only the android java app sh1t overhead slugged it to death..
with some luck, a wayland phone distro will be usable on it someday :cyclops:
eMPee584 said:
uhhm sorry, only the ones I uploaded.. Maybe just take it to your nearest repair cafe for help?
I have still like three or four sk17s here with various states of brokenness (screen, plugs, buttons, speaker...)
It was a really usable device, only the android java app sh1t overhead slugged it to death..
with some luck, a wayland phone distro will be usable on it someday :cyclops:
Click to expand...
Click to collapse
Thank thanks! :good::good::good:
Gawd how I miss this phone.
Related
Dear fellow xda-devs,
After some discussion with mikechannon in our diagnosis thread, we came to a conclusion that my Hermes camera is actually broken. I can't live without it on my phone as I'm a guy who loves spontaneous photography. I can shoot on practically anything, anytime. A standalone camera is too expensive for me. I'm just a student and my Hermes practically used up my savings.
So here I am, appealing to all Hermes users who have a bricked/faulty/extra/spare/not-in-use to donate/spare/sell me their Hermes camera at a bargain.
Thanks in advance.
P.S - I live in Malaysia
abubakar said:
Dear fellow xda-devs,
After some discussion with mikechannon in our diagnosis thread, we came to a conclusion that my Hermes camera is actually broken. I can't live without it on my phone as I'm a guy who loves spontaneous photography. I can shoot on practically anything, anytime. A standalone camera is too expensive for me. I'm just a student and my Hermes practically used up my savings.
So here I am, appealing to all Hermes users who have a bricked/faulty/extra/spare/not-in-use to donate/spare/sell me their Hermes camera at a bargain.
Thanks in advance.
P.S - I live in Malaysia
Click to expand...
Click to collapse
Hi
As it happens I have one I could donate, BUT the postage costs might be expensive from UK to Malaysia.
Perhaps wait to see if someone closer has one for you.
Mike
mikechannon said:
Hi
As it happens I have one I could donate, BUT the postage costs might be expensive from UK to Malaysia.
Perhaps wait to see if someone closer has one for you.
Mike
Click to expand...
Click to collapse
Hi again,
wow. You're my true hero. Like daylight batman. lol. We'll wait and see...
Any kind souls?
Puhleease?
Hmm, maybe cause this thread is in the Hermes accessories section. Not enough exposure. Lol
..
Check at lelong.com.my u might get sumtin from there..
maybe buy this just posted one for spare parts...
http://forum.xda-developers.com/showthread.php?t=415788
good luck
hey there.
nah, ive checked lelong. every other day i'll browse lelong n ebay to kill time. thanks for your response.
hey hey,
yeah i saw that post too. there are tons of faulty devices out the that i can make use of, but money has always been the culprit stopping me from doing so..
lol
btw mike, i was wondering how much will the shipping be from Uk to Malaysia for small packets? Cause last week, i bought a pair of stylus and the shipping is only a couple of pounds. I was thinking that if you were to donate, i think it is only fair that i cover your shipping cost
mike might not see this post, so u may want to PM him
galaxys said:
mike might not see this post, so u may want to PM him
Click to expand...
Click to collapse
i did. thanks
I just happen to have got some kind of problem with my camera, and taking it out has fixed the battery drain issues and stuff, I live in the Uk and if you don't send it off to abubakar, would you be willing to let me knows? I would like to fix my phone too but unsure where to get the part for it.
Cheers
eyupwolf said:
I just happen to have got some kind of problem with my camera, and taking it out has fixed the battery drain issues and stuff, I live in the Uk and if you don't send it off to abubakar, would you be willing to let me knows? I would like to fix my phone too but unsure where to get the part for it.
Cheers
Click to expand...
Click to collapse
Sorry, posted to him today. There have been a couple of threads parting out TyTns though.
Mike
mikechannon said:
Sorry, posted to him today. There have been a couple of threads parting out TyTns though.
Mike
Click to expand...
Click to collapse
Oks, thanks for replying, I'll keep an eye open.
I would like to install a new shield on my screen but I can't tell if the original is removable and what the recommended method of removal would be if it is.
DOUBLE POST!
Please read the forum rules and don't clutter it up starting useless threads.
kimtyson said:
DOUBLE POST!
Please read the forum rules and don't clutter it up starting useless threads.
Click to expand...
Click to collapse
Ok, did you have anything productive to add like maybe answer my question or are you too busy playing forum cop?
WillardZ said:
Ok, did you have anything productive to add like maybe answer my question or are you too busy playing forum cop?
Click to expand...
Click to collapse
haha.....everyone gets so butt hurt here. I hope this thread gets deleted
If it actually still has the scondary film covering over it then use a wooden or soft plastic tooth pick to slide up under the screen protector and simply remove it. I would wait until you have a replacement before doing this. I've been a PDA user for years and I learned the hard way early on that the first thing you should do is put on the screen protector or you end up with a scratched screen.
JohnMcD348 said:
If it actually still has the scondary film covering over it then use a wooden or soft plastic tooth pick to slide up under the screen protector and simply remove it. I would wait until you have a replacement before doing this. I've been a PDA user for years and I learned the hard way early on that the first thing you should do is put on the screen protector or you end up with a scratched screen.
Click to expand...
Click to collapse
Please don't encourage him. He posted this question here, http://forum.xda-developers.com/showthread.php?p=5615140#post5615140.
WillardZ said:
Ok, did you have anything productive to add like maybe answer my question or are you too busy playing forum cop?
Click to expand...
Click to collapse
Being "productive" is a relative point of view. Many of us consider you starting a new thread with a double post as non-productive.
I am not being a forum cop. I have just as much right to my posts as you do and the community polices itself. Maybe you also missed that in the forum rules. But we can let the mods decide once they see this.
My opinion is that your initial question is a little ridiculous. Is original protector removable? Really?????
If you are referring to the flimsy protective film that ships on the device? It is removable. Otherwise you would need to try and look through the message that is pre-printed on it.
If you mean the protector that is shipped in the box, well that is also removable if you have attached it.
If you mean ANY screen cover, then the answer is still yes. They are all removable.
I hope that is a productive answer for you and you will drop this silly question.
JohnMcD348 said:
If it actually still has the scondary film covering over it then use a wooden or soft plastic tooth pick to slide up under the screen protector and simply remove it.
Click to expand...
Click to collapse
Thanks for your help but, I don't know if there is any "secondary film" on the screen. Of course I'm not talking about any film with writing on it. My question is, Is there a protector installed on the screen that shoud removed before installing the extra spare that is included in the box? I don't want to start digging around without even knowing if there is a removable screen protector there. I guess what I need to do is call HTC and get the answer. Thanks anyway.
Oh yeah, for the forum cops, I started this second post because I wasn't getting any response from the first.
kimtyson said:
Please don't encourage him. He posted this question here, http://forum.xda-developers.com/showthread.php?p=5615140#post5615140.
Click to expand...
Click to collapse
After taking a few minutes to scan your posts I have come to the realization that through your diligence in weeding out the stupid and the lazy, you truly deserve this award.
WillardZ said:
Oh yeah, for the forum cops, I started this second post because I wasn't getting any response from the first.
Click to expand...
Click to collapse
Ever think that you didn't get any answer because the question was so silly?
If you ask the question 100 times does that make it a better question? I don't see any fine print in the forum rules that states if you don't get a reply you should pepper the board with the question until someone answers you. I guess you have become accustomed to getting an immediate answer to any question you have. It must be nice.
Thanks for the award. It just reaffirms my belief in your intelligence and maturity. Have a nice day.
For the record, there is no secondary, tertiary, or other film on the device. Just slap your screen protector on there like all of us do. It really is not a big deal.
so yeah I was dreading the day this would come...my brother drooped the phone and the digitizer broke, luckly, everything works fine with the phone even the touch screen, i just need to replace the crumbling glass..
So I ask you fellow XDAers
where and how do i get these screens for the best price, PLUS a good guide on how to take the phone apart and then BACK together
thank you guys very much!
Cheers!
NEW TOUCH SCREEN GLASS Digitizer Motorola AT&T Atrix 4G
and there is a guide here on XDA on replacing the screen. just search for it.
Thanks m8
Ok I have been looking...didnt find anything resembling a guide...help?
CrazyMcCool said:
Ok I have been looking...didnt find anything resembling a guide...help?
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/1
here is a teardown which should assist you on your journey
tjjensen23 said:
http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/1
here is a teardown which should assist you on your journey
Click to expand...
Click to collapse
Yeah I saw the tear down before, however i feel like there are 2 many steps to just remove the screen...youtube vids show less steps its all very confusing..
ALSO putting it all back together is my main issue tbh..
hmm yeah sorry i cant find the link either but i know i had seen ti here before. anyways i found another one for you.
http://www.repairlaunch.com/repair/atrix-4g/
good luck. seems like alot of work.
Should be an easy fix since the screen isn't hot-glued or anything.
Gold luck.
Thank you guys!
Awesome to know that there are people that care
Cheers!
Hi All
Is it possible for any DEV to fix the USSD Problem in Photon.
I have looked into many threads and nothing helped.
Seems like there is some patch which needs to be applied
hunderteins said:
TL;DR: It works for me. Try it. If it works, good for you.
I patched libril-qc-1.so in a way, that it sends a fixed length of 32 bytes instead of 4. (position 0xa8fc2).
Good luck,
hunderteins
Click to expand...
Click to collapse
Problem running ussd code
USSD fix for 4xx based roms
Gingerbread and USSD QuD fix
+1
Not a questions forum
Sent from the back of a MoPhoKing AOKPDB
bullfrog527 said:
Not a questions forum
Sent from the back of a MoPhoKing AOKPDB
Click to expand...
Click to collapse
Might as well be, no one listens.
+1
Sent not from your device!
Omg. Are you kidding? I know about this fix at least one month. And try to hex edit our ril, even if I don't know where to search, even when I don't need ussd, searched in the framework too and probably this fix is not our problem.
I lost few hours with searching for this problem.
Did you try to fix it?
sukhdeepsinghkohli said:
Hi All
Is it possible for any DEV to fix the USSD Problem in Photon.
I have looked into many threads and nothing helped.
Seems like there is some patch which needs to be applied
Click to expand...
Click to collapse
jam97 said:
+1
Click to expand...
Click to collapse
bullfrog527 said:
Not a questions forum
Sent from the back of a MoPhoKing AOKPDB
Click to expand...
Click to collapse
Acvice said:
Might as well be, no one listens.
Click to expand...
Click to collapse
ryan8r said:
+1
Sent not from your device!
Click to expand...
Click to collapse
Apparently folks are not bothering to read the forum guidelines yet again and could obviously care less. This has gotten completely out of hand so on that note I give you the following...
Camel+straw=back injury
(I will no longer be releasing or maintaining anything on xda until this BS stops)
While it is annoying, there are probably 100 good users to every bad one. So all hope is not lost. All we really need is moderators that actually frequent these forums to enforce the rules. It's not the userbases responsibility to report things and hope the mods do something. It's the mods responsibility to do the job they were given.
You know this **** is getting out of hand when important devs can't stand to be here anymore. Sorry Loki :/
Acvice said:
While it is annoying, there are probably 100 good users to every bad one. So all hope is not lost. All we really need is moderators that actually frequent these forums to enforce the rules. It's not the userbases responsibility to report things and hope the mods do something. It's the mods responsibility to do the job they were given.
You know this **** is getting out of hand when important devs can't stand to be here anymore. Sorry Loki :/
Click to expand...
Click to collapse
Seeing that both my primary and two backup drives failed today it's a moot point now, at least for me. I lost everything as far back as my custom PalmOS ROM days. Been fun guys.
Lokifish Marz said:
Seeing that both my primary and two backup drives failed today it's a moot point now, at least for me. I lost everything as far back as my custom PalmOS ROM days. Been fun guys.
Click to expand...
Click to collapse
I've been a tech for years and have literally never seen three HD's die in rapid succession like that... Mother of God...
It's been a pleasure getting to use your work Loki. Hope to see you back around here sometime. Till then, take care.
wow, sorry about that Loki. Hope things get better. Your work has been appreciated by many here
Sent from my MoPhoKing AOKPCB
I had my hopes up seeing the heading..
Wow you just come to a dev section n post a question.. that too with a thumbs up sign as if u cracked it? I too want it fixed, but this is not right buddy.
Acvice said:
I've been a tech for years and have literally never seen three HD's die in rapid succession like that... Mother of God...
It's been a pleasure getting to use your work Loki. Hope to see you back around here sometime. Till then, take care.
Click to expand...
Click to collapse
Multiple pre-failures on primary (SMART monitor lit up like a christmas tree), must save data, grab backup (I have pets) hard impact with hardwood floor, grab second backup and in my haste plug directly into wall and (cue power surge) smoke not figuratively but literally. Three hard drives in about five minutes.
The only time I've ever seen multiple drives go at once was a voltage controller for the pci slots short and take out a RAID5 array in one stroke.
Well anyways, I will eventually get up and running but at this time it's really not a priority. Thanks to those that have donated and supported photon development and my work.
http://forum.xda-developers.com/showthread.php?t=1223352&page=4
hi Guys,
i just got my Xperia S on Friday and today i noticed a "strange" thing: the bottom part of the phone right under the transcluent ribbon is moving back and forth a bit. is that normal? i'm a bit afraid it'll break.
thanks,
DJ
heck, i wanted to post this in Q&A... can some mod please move it? thanks a lot!
the bottom is swappable!
so yeah it could be a bit loose... shouldn't be too loose though
SnowOokami said:
the bottom is swappable!
so yeah it could be a bit loose... shouldn't be too loose though
Click to expand...
Click to collapse
It is not swappable on the S.
SnowOokami said:
the bottom is swappable!
so yeah it could be a bit loose... shouldn't be too loose though
Click to expand...
Click to collapse
thanks! i was so freaking afraid of breaking it, it's brand new so i thought it might be some manuf failure. not too lose, less than 1mm but i still feel it
yeah, i just googled it, it's not swappable on the S but on the U... should i be worried then?
donjamal said:
thanks! i was so freaking afraid of breaking it, it's brand new so i thought it might be some manuf failure. not too lose, less than 1mm but i still feel it
yeah, i just googled it, it's not swappable on the S but on the U... should i be worried then?
Click to expand...
Click to collapse
You should consider getting a replacement...!!! Mine doesn't move even a bit...!!! It's tight...!!! If you can feel it's moving, go get a replacement...!!!
Sent from my LT26i using xda premium
what is this? in a development section, please You should read after posting.
One botton, please.......
pato66 said:
what is this? in a development section, please You should read after posting.
One botton, please.......
Click to expand...
Click to collapse
i accidently posted this here, i was in the Q&A section, so i have no idea how this thread ended up in dev section. i already apoligized for it and asked any of the mods to move this in my second post. so yeah, thanks pointing out the obvious.
to all those who tried to help, thanks a lot!
I had this problem too and my phone's currently getting repaired. Sent it in because I had yellow tint, but also mentioned the loose bottom so hopefully they fix that too.
http://forum.xda-developers.com/showthread.php?t=1655164
including pictures!
SnowOokami said:
http://forum.xda-developers.com/showthread.php?t=1655164
including pictures!
Click to expand...
Click to collapse
so not worthy to bring it back and get the phone replaced (in my country they have to replace it if i bring it back within 3 working days), cuz i most likely end up in the same situation? i also have this cracky plastic noise... oh, i love this phone otherwise, especially after my x10 one more minor problem is that the BL is not unlockable, that was disappointing, too, but hey, i can live with it for now until i get ICS
thanks for the answers everyone!
I don't know... i should just try to swap it, I don't have the problem with my XS