[Q] AT&T one x+ flashing kernel - HTC One X+

I had installed the Elegancia ATT ROM and had flashed the kernel using the kernel_flasher. My phone boots up and runs just fine but the battery still drains just as fast as stock. When i try to flash other kernels the version never changes it just stays at
3.1.10-g262c6aa
[email protected] #1
SMP PREEMPT
Is this the right kernel for Elegancia?

From what I've read, the ATT HOX+ can't be flashed with a kernel yet because there is no S-OFF hack yet. Only international HOX+ has S-OFF.

international has NO s-off.
the way to flash is correct
ask the developer of the rom

The only kernels we (as AT&T users) have available are the ones for specific roms. I'm not sure of the actual "name" or version of the Elegancia kernel but the one that comes with it is the only one you are supposed to use.
I think.... Someone with more knowledge confirm please. I still haven't flashed anything just on stock rooted.
I think in the Elegancia OP it states that he used the stock kernel by the way.
Never Die!

guys whats the difference between att one x+ and international? why are there two recoveries?
i thought only original one X was different (snapdragon vs tegra...)

-=knop=- said:
guys whats the difference between att one x+ and international? why are there two recoveries?
i thought only original one X was different (snapdragon vs tegra...)
Click to expand...
Click to collapse
International one is 3G and AT&T is 4G. Most of the hardware is the same, but they have diffrent radio hardware, and thus some software and kernel diffrences. Recovery is built using the kernel so diffrent recoveries are required.
Sent from my HTC One X+ using Tapatalk 2

AndroHero said:
International one is 3G and AT&T is 4G. Most of the hardware is the same, but they have diffrent radio hardware, and thus some software and kernel diffrences. Recovery is built using the kernel so diffrent recoveries are required.
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
On this note, is there any way to disable the 4g network? On my s-off inspire I just went to *#*#4636#*#* -> Phone info -> GSM Only to knock off the WCDMA reception based on where I was, as network infrastructure was very primitive where I lived. On the HOX+ when you try this, it reverts back to LTE radio option immediately. Is it because there is no custom kernel, no alternate radio, or no S-OFF? I'm on Elegancia as well, but that should make a difference since it did this unrooted stock and rooted stock.
Thanks guys

willwalk93 said:
On this note, is there any way to disable the 4g network? On my s-off inspire I just went to *#*#4636#*#* -> Phone info -> GSM Only to knock off the WCDMA reception based on where I was, as network infrastructure was very primitive where I lived. On the HOX+ when you try this, it reverts back to LTE radio option immediately. Is it because there is no custom kernel, no alternate radio, or no S-OFF? I'm on Elegancia as well, but that should make a difference since it did this unrooted stock and rooted stock.
Thanks guys
Click to expand...
Click to collapse
If you have s-off, i assume your rooted? Have you tried any of the various toggle widgets to toggle 4G on/off?
Sent from my HTC One X+ using Tapatalk 2

AndroHero said:
If you have s-off, i assume your rooted? Have you tried any of the various toggle widgets to toggle 4G on/off?
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
I was s-off on the inspire not the HOX+. Can you even s-off this yet?
Sent from my HTC One X+ using xda app-developers app

zacktidus said:
I had installed the Elegancia ATT ROM and had flashed the kernel using the kernel_flasher. My phone boots up and runs just fine but the battery still drains just as fast as stock. When i try to flash other kernels the version never changes it just stays at
3.1.10-g262c6aa
[email protected] #1
SMP PREEMPT
Is this the right kernel for Elegancia?
Click to expand...
Click to collapse
We dont have kernel source yet and just one kernel out so all the kernels are going to show the same. Devs can make some tweaks to kernels without having source so it is recommended to use the kernel that comes with the rom. Rom OP normally tells you. Elegancia requests you install kernel first. Dont know if not installing will be catostrophic or not, most likely not.
starfox5194 said:
From what I've read, the ATT HOX+ can't be flashed with a kernel yet because there is no S-OFF hack yet. Only international HOX+ has S-OFF.
Click to expand...
Click to collapse
Kernels CAN be flashed, must be flashed in fastboot. Will not flash with the rom like s-off devices, but can still be flashed.
Once we get kernel source things will get interesting around here.... Cant wait

So how long does it normally take for us to get the kernel source? Is it definite that we will even get one?

Related

[Q] When to flash new radios?

Did a quick search on this and came up empty. Background: I don't ever need to update radios on my evo 4g. I don't know if I should update the radios on my gf's 3d. She has had the phone for over a year and a half, I rooted the phone the second day she had it and I think ics was pushed out shortly after I rooted it (it was still running gingerbread from the store). I have flashed an ics rom and things seem to work okay but I was wondering if I should flash a different radio package and if so, which one should I flash? There are so many and I am not sure which one I should use. Right now the phone is running:
hardware version 0002
android 4.0.3
sense v3.6
baseband version 0.97.00.0518
build number 2.89.651.2 CL409645 release-keys
pri 1.15_003
I also attached a copy of the hboot version for reference. Basically, I have the phone running SmoothCriminal-v2.3 but wanted to change the rom to something new, like a cm10 or jb rom, but was concerned whether or not to flash new radios as some of these threads say to use the latest firmware. Any help, advice, direction, smacks over the head for the noob question is appreiciated.
Background: I don't ever need to update radios on my evo 4g.
Click to expand...
Click to collapse
Any why do you think this?
Bottom line, carriers release radio updates for a reason. It can't hurt to flash them when they are released.
pmacevad said:
Did a quick search on this and came up empty. Background: I don't ever need to update radios on my evo 4g. I don't know if I should update the radios on my gf's 3d. She has had the phone for over a year and a half, I rooted the phone the second day she had it and I think ics was pushed out shortly after I rooted it (it was still running gingerbread from the store). I have flashed an ics rom and things seem to work okay but I was wondering if I should flash a different radio package and if so, which one should I flash? There are so many and I am not sure which one I should use. Right now the phone is running:
hardware version 0002
android 4.0.3
sense v3.6
baseband version 0.97.00.0518
build number 2.89.651.2 CL409645 release-keys
pri 1.15_003
I also attached a copy of the hboot version for reference. Basically, I have the phone running SmoothCriminal-v2.3 but wanted to change the rom to something new, like a cm10 or jb rom, but was concerned whether or not to flash new radios as some of these threads say to use the latest firmware. Any help, advice, direction, smacks over the head for the noob question is appreiciated.
Click to expand...
Click to collapse
Stock os upgrade includes radio updates also. The safest way to update to latest radio is update to stock ics sense 3.6 and then carry on your custom ROMs.
Sent from my HTC Sensation XL with Beats Audio X315e using Tapatalk 2
sitlet said:
Any why do you think this?
Bottom line, carriers release radio updates for a reason. It can't hurt to flash them when they are released.
Click to expand...
Click to collapse
I should say I have upgraded radios on the og EVO but it has stopped getting updates therefore, no new radios.
Sent from my ever-changing OG Evo...
dr.faramroze said:
Stock os upgrade includes radio updates also. The safest way to update to latest radio is update to stock ics sense 3.6 and then carry on your custom ROMs.
Sent from my HTC Sensation XL with Beats Audio X315e using Tapatalk 2
Click to expand...
Click to collapse
A rooted version here I presume? Tia
Sent from my ever-changing OG Evo...
The latest radio with ics sense 3.5 has many fixes and calls for no need of further radio update. EVO's radio is well balanced.
Sent from my HTC Sensation XL with Beats Audio X315e using Tapatalk HD
We dont get new radios anymore either. If ur not on the latest, then flash the last RUU and restore her backup.
dr.faramroze said:
The latest radio with ics sense 3.5 has many fixes and calls for no need of further radio update. EVO's radio is well balanced.
Sent from my HTC Sensation XL with Beats Audio X315e using Tapatalk HD
Click to expand...
Click to collapse
Could you recommend what to flash?
faiyo said:
We dont get new radios anymore either. If ur not on the latest, then flash the last RUU and restore her backup.
Click to expand...
Click to collapse
Never flashed a RUU before... Is that a stockROM? Will I lose root or s-off by doing this? Is there a guide you could recommend that I could read that could help me through the process? As for restoring a backup, do you refer to her data backup?
I also wanted to put the latest recovery on her phone. Which would that be? What recovery are most of the users using? Thanks folks!
Sent from my ever-changing OG Evo...

Flashing international custom ROMs?

Looking at the codenames, both the international One and the ATT/TMOUS One are M7_UL. I'm pretty sure that they should all be able to run identical ROMs. Anyone know anything about this? Is it like the DHD/Inspire 4G where US variants needed an extra zip to flash things to make the ROM compatible?
Already confirmed that this works fine.
Yes they work fine ,first install Rom then flash boot.img
Sent from my custom M7
So I can flash any rom from the International version and it will work perfectly? Has anyone done this?
Sent from my HTC One using Tapatalk 2
Yes.
YoungAceAtlanta said:
So I can flash any rom from the International version and it will work perfectly? Has anyone done this?
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Edit: Previous post removed. I was mistaken. apologies.
Hunt3r.j2 said:
Looking at the codenames, both the international One and the ATT/TMOUS One are M7_UL. I'm pretty sure that they should all be able to run identical ROMs. Anyone know anything about this? Is it like the DHD/Inspire 4G where US variants needed an extra zip to flash things to make the ROM compatible?
Click to expand...
Click to collapse
No such thing as international One.
It's all the same. The only seperation is bandwidth that your carrier operates on.
nugzo said:
Depends.... Supposedly if you update to the new firmware and hboot from the OTA update, roms built on the older firmware have issues. Key is to not do the firmware update yet. Not untill the devs start using that as their base..Or at least a base with compatible firmware. I think if you are on 1.19 you are ok. If software is 1.20 then you might have issues. If you are on 1.20 look for roms with the same firmware.
Click to expand...
Click to collapse
I'm on 1.26 and all the roms on for the HTC one is 1.29. So is it safe to flash them?
Sent from my HTC One using Tapatalk 2
YoungAceAtlanta said:
I'm on 1.26 and all the roms on for the HTC one is 1.29. So is it safe to flash them?
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Let me research the thread i was reading and will report back. It was the viper thread -i'll post a link. You know what my bad i apologize. I was actually in the wrong forum when i read that. somehow i was in the one x+ forum, Disregard my statement above. i will edit.

can we get a Rogers thread?

Adming can we get an official rogers thread so us user can help each other out? something tha5 can include stock roms , kernals, recoveries etc etc
No reason to make 2 threads bro
Sent from my HTC One using Tapatalk 2
Nick281051 said:
No reason to make 2 threads bro
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
well pleas3 tell me where i can find stock recovery and kernal for rogers
....
well pleas3 tell me where i can find stock recovery and kernal for rogers
toyo01233 said:
well pleas3 tell me where i can find stock recovery and kernal for rogers
Click to expand...
Click to collapse
The recovery for rogers is the same as the recovery for at&t, which is the same recovery on the international phone.
the kernel will be the same too if you match the software release to the release the Rogers device came with out of the box.
In other words if your rogers phone came with 1.29.xx.13 out of the box, then you just need to find the stock rom based on that release, probably in the international forums, and grab the boot.img from the zip.
For those who still don't understand let me say it again.
The GSM HTC One (M7_UL) devices across the globe (except the dual sim models) ARE THE SAME PHONE.
They use the same stock recovery and hboot and even RADIO.
I really hope the Mods merge the forums soon like they said they were going to.
It's getting cray cray around here.
gunnyman said:
The recovery for rogers is the same as the recovery for at&t, which is the same recovery on the international phone.
the kernel will be the same too if you match the software release to the release the Rogers device came with out of the box.
In other words if your rogers phone came with 1.29.xx.13 out of the box, then you just need to find the stock rom based on that release, probably in the international forums, and grab the boot.img from the zip.
For those who still don't understand let me say it again.
The GSM HTC One (M7_UL) devices across the globe (except the dual sim models) ARE THE SAME PHONE.
They use the same stock recovery and hboot and even RADIO.
I really hope the Mods merge the forums soon like they said they were going to.
It's getting cray cray around here.
Click to expand...
Click to collapse
weird i finally got the ota working, it was hanging on updating screen, i held power down, reboot and it would continue. had t9 do this a few times....anywy to do a compatible cwm backup including recovery?

Would someone plz answer this?

Hi everybody. I have an S-OFF EVITARE_UL Telus handset with CID 11111111. HBOOT is 1.40. It is an LTE handset. I am still on 4.1.1 JB with Sense 4+.
From what I understand, I can't flash a ROM that's made for an International HOX+.
AT&T rolled out 4.2.2 with Sense 5. Telus did not. My question is can I flash a ROM that's made for AT&T? If so, what is the procedure? Thanks.
Sent from my HTC One X+ using XDA Premium 4 mobile app
You understand wrong then. Your device uses diffrent radio hardware to the international version and requires a diffrent kernel. There is nothing you can do to make any international rom compatible with your device. Sorry!
Although AFAIK you will have no issues flashing an AT&T rom...
Sent from my HTC One X+ using Tapatalk
yeah! you can flash At&t htc one x plus roms on telus.
blinkash said:
Hi everybody. I have an S-OFF EVITARE_UL Telus handset with CID 11111111. HBOOT is 1.40. It is an LTE handset. I am still on 4.1.1 JB with Sense 4+.
From what I understand, I can't flash a ROM that's made for an International HOX+.
AT&T rolled out 4.2.2 with Sense 5. Telus did not. My question is can I flash a ROM that's made for AT&T? If so, what is the procedure? Thanks.
Sent from my HTC One X+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, you can flash sense 5 and android 4.2.2 based At&t roms to Telus device. in fact I use one, presently we have three roms. Elegancia 6.2 .. Blackout extreme ..and magiorom. These roms were based on system dump provided by lloir, the hboot is not updated and its safe to try these sense 5 roms.
make a backup of your present rom and try these...
don't even try to flash roms made for international version.
Will it require s-off and root ????

[Q] how do you s-off AT&t htc one x plus

First of all I would like to thank all the developers for all their hard work.
I have an issue. I had soft bricked my Telus HTC One X+ a while ago. I have got it up and going again on wifi. But when I put a sim into it does not have any signal. I have checked to make sure the APN is correct. have tried all the APN's for telus and still no luck. So all I can come up with is there is no radio on it. So my question is is there a way to s-off the phone or another way to flash the radio onto it. I have tried an ruu.exe. But I can not find the newest update (which is the 3.15.xxxx) that is a exe to flash the phone. And since I do not have s-off I can not flash the zip it just keeps failing. I thought that way I would have a radio again on the phone. my H-BOOT is 1.40.0000 radio 2.14.55.11. Any help would be appreaciated. i am using stock rom . It it sense 4+
You don't
If you can find the RUU it will "fix" the kernel mismatch issue (no radio)
Sent from my One X+ using Tapatalk
Lloir said:
You don't
If you can find the RUU it will "fix" the kernel mismatch issue (no radio)
Sent from my One X+ using Tapatalk
Click to expand...
Click to collapse
Ok thanx was hoping could get the s-off would make life alot easier. Lol

Categories

Resources