I did some read on this forum, so far the solution seems:
1) root; then
2) flash back to ginger-bread then factory reset; or
flash to another ICS
My question is, can I directly flash to another ICS rom? or in
other word, do I have to first go back to 2.3 and do factory reset?
According to the sticky post
http://forum.xda-developers.com/showthread.php?t=1311081
one can safely flash back to 2.3; if ICS is desired, use this post:
http://forum.xda-developers.com/showthread.php?t=1746181
which however states it has the superbrick bug at the very top.
Does that means ICS is right not safe?
One more newbie question:
In the sticky posts, one talk about how to flash "binaries" without
increase flash count; another talk about flash custom "firmware"
and "ROM"; is there a post explaining the terminology of "binaries",
"firmware", "ROM"? I know there is a modem firmware, and kernel
in the android. is a post which could help me get my head clear
on this jargon?
Thanks a lot!
tyhust said:
I did some read on this forum, so far the solution seems:
1) root; then
2) flash back to ginger-bread then factory reset; or
flash to another ICS
My question is, can I directly flash to another ICS rom? or in
other word, do I have to first go back to 2.3 and do factory reset?
According to the sticky post
http://forum.xda-developers.com/showthread.php?t=1311081
one can safely flash back to 2.3; if ICS is desired, use this post:
http://forum.xda-developers.com/showthread.php?t=1746181
which however states it has the superbrick bug at the very top.
Does that means ICS is right not safe?
One more newbie question:
In the sticky posts, one talk about how to flash "binaries" without
increase flash count; another talk about flash custom "firmware"
and "ROM"; is there a post explaining the terminology of "binaries",
"firmware", "ROM"? I know there is a modem firmware, and kernel
in the android. is a post which could help me get my head clear
on this jargon?
Thanks a lot!
Click to expand...
Click to collapse
Even simpler would be to root using Exynos Abuse then use Mobile Odin to flash Siyah 4.3.3 zImage so you have CWM and then you can use it to flash stuff. Once you have siyah you can factory reset.
122ninjas said:
Even simpler would be to root using Exynos Abuse then use Mobile Odin to flash Siyah 4.3.3 zImage so you have CWM and then you can use it to flash stuff. Once you have siyah you can factory reset.
Click to expand...
Click to collapse
Is the ExynosAbuse in this thread?
http://forum.xda-developers.com/showthread.php?t=2050297
What do I do with the download? is there an instruction somewhere?
Siyah 4.3.3 is jelley bean, right? I current have 4.0.4 stock, would it work - or won't they conflict as they are not same or even similar version?
Thanks a lot for your patience as I am a NEWBIE.
tyhust said:
Is the ExynosAbuse in this thread?
http://forum.xda-developers.com/showthread.php?t=2050297
What do I do with the download? is there an instruction somewhere?
Siyah 4.3.3 is jelley bean, right? I current have 4.0.4 stock, would it work - or won't they conflict as they are not same or even similar version?
Thanks a lot for your patience as I am a NEWBIE.
Click to expand...
Click to collapse
You download the .APK and install it. Google it if you must. There is an ICS version of Siyah 4.3.3
122ninjas said:
You download the .APK and install it. Google it if you must. There is an ICS version of Siyah 4.3.3
Click to expand...
Click to collapse
Forgive my thickness, the siyah 4.3.3 ics does contain CWM right?
Also, how can I upgrade to jellybean? for ROM, which one do you recommend?
tyhust said:
Forgive my thickness, the siyah 4.3.3 ics does contain CWM right?
Also, how can I upgrade to jellybean? for ROM, which one do you recommend?
Click to expand...
Click to collapse
Yes it does. You just flash any JB rom using proper install instructions normally written in the OP. Try all the roms it's personal preference. They all have very few bugs
122ninjas said:
Yes it does. You just flash any JB rom using proper install instructions normally written in the OP. Try all the roms it's personal preference. They all have very few bugs
Click to expand...
Click to collapse
I installed the ExynosAbuse apk by chainfire with intention to root the device,
however, once installed, when go through the list of options, since the patch
option come first, then followed by root, so I thought - I know I am dumb on this - the
first is a super option which not only patch but also root, and the 2nd one only
root, so clicked "patch". Now I can not root my device. and there
is NO option to remove the patch in the app.
So am I doomed, or there is a way to remove the patch?
could I still use thisZergRush Exploit)
http://forum.xda-developers.com/showthread.php?t=1285894
to root?
Thanks!
tyhust said:
I installed the ExynosAbuse apk by chainfire with intention to root the device,
however, once installed, when go through the list of options, since the patch
option come first, then followed by root, so I thought - I know I am dumb on this - the
first is a super option which not only patch but also root, and the 2nd one only
root, so clicked "patch". Now I can not root my device. and there
is NO option to remove the patch in the app.
So am I doomed, or there is a way to remove the patch?
could I still use thisZergRush Exploit)
http://forum.xda-developers.com/showthread.php?t=1285894
to root?
Thanks!
Click to expand...
Click to collapse
I did the EXACT same thing you did. I'd really like to get my camera working again, but I have no clue how to undo what I've done. Any help?
Well if nothing else, maybe you can look at this as a learning opportunity. Remember to always read thoroughly and know what you're flashing / installing prior to doing it. Good luck , happy flashing.
Related
Hi All.
I'm relatively new to all this so go easy on me.
I've got a Samsung Galaxy S2 on T Mobile.
Model Number: GT-I9100
Android Version: 4.0.3
Baseband Version: I9100XXLPQ
Kernel Version: 3.0.1 5-i9100XXLPQ-CL223505
Build Number: IML74K.XXLPQ
I've tried to root it using a method I found on here, I think it was by chainfire, the Odin app said it was a success but when the phone reboots it just freezes and doesnt go any further.
I want to have the cyanogenmod rom on my phone with it fully rooted.
Any help would be greatly appreciated, I have searched this forum for answers but its pretty vast.
What kernel did you use to root your device?
Sent from my GT-I9100 using xda app-developers app
HANDSY said:
What kernel did you use to root your device?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
is this a kernel? if so this one
I9100XXLPQ_I9100OXALPQ_XEO
It's a ROM, we need information about kernel.
gashalasha7 said:
is this a kernel? if so this one
I9100XXLPQ_I9100OXALPQ_XEO
Click to expand...
Click to collapse
That is a full firmware, not a kernel.
You said you used something from chainfire. If you can't tell us, perhaps a link to what you used would be helpful.
ctomgee said:
That is a full firmware, not a kernel.
You said you used something from chainfire. If you can't tell us, perhaps a link to what you used would be helpful.
Click to expand...
Click to collapse
initially I think it was this
GT-I9100_UMKK1_insecure.tar
gashalasha7 said:
initially I think it was this
GT-I9100_UMKK1_insecure.tar
Click to expand...
Click to collapse
This is an insecure kernel for android build UMKK1, which is Gingerbread.
You have an XXLPQ build, which is ICS.
You need to use a kernel that is closer to your build. There is an LPQ kernel in the CF-root thread, flash that. (make sure to use the one labelled as "proper", it fixes some stuff)
ctomgee said:
This is an insecure kernel for android build UMKK1, which is Gingerbread.
You have an XXLPQ build, which is ICS.
You need to use a kernel that is closer to your build. There is an LPQ kernel in the CF-root thread, flash that. (make sure to use the one labelled as "proper", it fixes some stuff)
Click to expand...
Click to collapse
Originally my phone had Gingerbread - which is why I used that kernel. However, I then thought it had rooted. So installed ICS. Downloaded Rom manager and it tells me my phone isnt rooted.
Should I still use that one?
Do I need to do anything after that?
gashalasha7 said:
Originally my phone had Gingerbread - which is why I used that kernel. However, I then thought it had rooted. So installed ICS. Downloaded Rom manager and it tells me my phone isnt rooted.
Should I still use that one?
Do I need to do anything after that?
Click to expand...
Click to collapse
Is the information in post 1 still accurate? Is that what is CURRENTLY on your phone? Then use the LPQ "proper" kernel in that thread I linked. Instructions are in post 1 of that same thread, but the short of it is: find the kernel that matches your build, and flash with Odin. (I already told you which one) That should be all you need to do. That will show the Triangle when you boot the phone, but if you don't care about that showing, then you're done.
So you're saying your reason for using the UMKK1 Gingerbread kernel was because you were PREVIOUSLY on Gingerbread? Well, you installed ICS. Your kernel changed along with it. You'd now have to use an ICS kernel to root ICS. Make sense?
ctomgee said:
Is the information in post 1 still accurate? Is that what is CURRENTLY on your phone? Then use the LPQ "proper" kernel in that thread I linked. Instructions are in post 1 of that same thread, but the short of it is: find the kernel that matches your build, and flash with Odin. (I already told you which one) That should be all you need to do. That will show the Triangle when you boot the phone, but if you don't care about that showing, then you're done.
So you're saying your reason for using the UMKK1 Gingerbread kernel was because you were PREVIOUSLY on Gingerbread? Well, you installed ICS. Your kernel changed along with it. You'd now have to use an ICS kernel to root ICS. Make sense?
Click to expand...
Click to collapse
Yep, makes sense.
Yeah the above is what is currently on my phone.
I'll give that a go. Thanks for your help.
CTOMGEE thanked for advice given.
Sent from my GT-I9100 using xda app-developers app
ctomgee said:
Is the information in post 1 still accurate? Is that what is CURRENTLY on your phone? Then use the LPQ "proper" kernel in that thread I linked. Instructions are in post 1 of that same thread, but the short of it is: find the kernel that matches your build, and flash with Odin. (I already told you which one) That should be all you need to do. That will show the Triangle when you boot the phone, but if you don't care about that showing, then you're done.
So you're saying your reason for using the UMKK1 Gingerbread kernel was because you were PREVIOUSLY on Gingerbread? Well, you installed ICS. Your kernel changed along with it. You'd now have to use an ICS kernel to root ICS. Make sense?
Click to expand...
Click to collapse
Hi there, it rooted, so thanks for your help with that.
However, I tried installing cyanogenmod from the latest one listed in the Rom Manager. It downloaded, the phone re-booted into recovery. I deleted cache and data, then installed the zip file from sd card, however it came up that it had failed and was aborted.
So now it's rebooted and is back to 4.0.3 but with all my data gone.
Man this sucks.
Hope you can help mate
gashalasha7 said:
Hi there, it rooted, so thanks for your help with that.
However, I tried installing cyanogenmod from the latest one listed in the Rom Manager. It downloaded, the phone re-booted into recovery. I deleted cache and data, then installed the zip file from sd card, however it came up that it had failed and was aborted.
So now it's rebooted and is back to 4.0.3 but with all my data gone.
Man this sucks.
Hope you can help mate
Click to expand...
Click to collapse
I don't use CyanogenMod, but I would avoid using ROM Manager if I were you. Why don't you just follow the instructions in the CM discussion thread? And which CM are you attempting to install? CM7, or CM9? (one is Gingerbread, and the other is ICS)
BTW - you would have had to delete all data, going to either version of CM anyways, as file system is a bit different between AOSP and Samsung based firmwares.
iesroxo when
ctomgee said:
I don't use CyanogenMod, but I would avoid using ROM Manager if I were you. Why don't you just follow the instructions in the CM discussion thread? And which CM are you attempting to install? CM7, or CM9? (one is Gingerbread, and the other is ICS)
Click to expand...
Click to collapse
The newest one, I think it was CM9.
To be honest mate there's so many threads and discussions unless you have a real grasp of it its not easy
is there a way of me telling if clockworkmod recovery is installed?
gashalasha7 said:
The newest one, I think it was CM9.
To be honest mate there's so many threads and discussions unless you have a real grasp of it its not easy
Click to expand...
Click to collapse
CM9 discussion thread. Has installation instructions in post 1, which don't involve using ROM Manager at all. As I said earlier, I'd avoid using ROM Manager; it often misbehaves on this device.
Here's some advice... even though I don't use CM (7 or 9), I found that that thread in 1 second by typing "cyanogenmod9 i9100 xda discussion thread" into Google. It was the first result that came up.
I know forum search sometimes is down, but I actually prefer to use Google for my searches anyways. You can even limit searches to a specific site by including "site:" followed by whatever site you are interested in limiting your search to.
For example, if I wanted to search the xda forums for i9100 rooting techniques, I'd Google:
site:forum.xda-developers.com i9100 rooting techniques
This will return a Google search for "i9100 rooting techniques" that are within the forum.xda-developers.com domain.
Rule #1 of the forum is to search before posting anyways... I know you're new to most of this, but you'll find people will tend to either not help or will be kind of mean if you post commonly asked questions.
Hope all this helps.
---------- Post added at 12:33 PM ---------- Previous post was at 12:31 PM ----------
gashalasha7 said:
is there a way of me telling if clockworkmod recovery is installed?
Click to expand...
Click to collapse
Boot to recovery. You'll know because CWM recovery has MANY more options than stock recovery. Stock recovery you can only wipe data/factory reset, wipe cache, and wipe dalvik cache, and maybe a couple other options. I don't exactly remember, it's been so long since I've had stock recovery.
ctomgee said:
CM9 discussion thread. Has installation instructions in post 1, which don't involve using ROM Manager at all. As I said earlier, I'd avoid using ROM Manager; it often misbehaves on this device.
Here's some advice... even though I don't use CM (7 or 9), I found that that thread in 1 second by typing "cyanogenmod9 i9100 xda discussion thread" into Google. It was the first result that came up.
I know forum search sometimes is down, but I actually prefer to use Google for my searches anyways. You can even limit searches to a specific site by including "site:" followed by whatever site you are interested in limiting your search to.
For example, if I wanted to search the xda forums for i9100 rooting techniques, I'd Google:
site:forum.xda-developers.com i9100 rooting techniques
This will return a Google search for "i9100 rooting techniques" that are within the forum.xda-developers.com domain.
Rule #1 of the forum is to search before posting anyways... I know you're new to most of this, but you'll find people will tend to either not help or will be kind of mean if you post commonly asked questions.
Hope all this helps.
---------- Post added at 12:33 PM ---------- Previous post was at 12:31 PM ----------
Boot to recovery. You'll know because CWM recovery has MANY more options than stock recovery. Stock recovery you can only wipe data/factory reset, wipe cache, and wipe dalvik cache, and maybe a couple other options. I don't exactly remember, it's been so long since I've had stock recovery.
Click to expand...
Click to collapse
Okay thanks.
Believe me I spent 5 hours last night searching for answers and reading.
I appreciate your help.
gashalasha7 said:
Okay thanks.
Believe me I spent 5 hours last night searching for answers and reading.
I appreciate your help.
Click to expand...
Click to collapse
Sometimes it's just a matter of inputting the right search terms.
Anyways, I'd also advise you to follow the "noob-proof" installation instructions only on that CM9 discussion thread. It is the most straight-forward, and involves the fewest amount of steps.
now its gone into kernel panic upload mode
this is a mare
gashalasha7 said:
now its gone into kernel panic upload mode
this is a mare
Click to expand...
Click to collapse
Were you following the "noob-proof" instructions as I advised?
What exact steps did you take?
Hi!
I was hesitant to open a new thread, especially since I watched the noob video before registration. But since I really want to make sure that what I am doing is correct, I have decided to post this.
I have SGS2-I9100 with ICS (so my firmware version is XWLPD). I will be using this tutorial to root my phone (How to Root Galaxy S2 i9100! [ICS][Android 4.0+] -on galaxys2root dot com) I am familiar with the basic terminology and also understand the principles of rooting. However, I do have a question about which CF-kernel am I supposed to flash. I found two of those (v5.3 and v5.4):
From the tutorial (i can't post outside links) - v5.3
And from Android authority - v5.4
Which one should i use and are they both ok with XWLPD firmwares?
(And don't I need an original kernel after the rooting? With previous tutorials, there was always an insecure and a secure kernel)
And after the device is rooted, what is the best thing to do? I am thinking: first I would flash Clockworkmod Recovery 4.0.1.4 (and backup my original ROM), and then install TITANIUM BACKUP for contacts, apps etc. Is that good?
I really appreciate all your help!
NomenNescio11 said:
Hi!
I was hesitant to open a new thread, especially since I watched the noob video before registration. But since I really want to make sure that what I am doing is correct, I have decided to post this.
I have SGS2-I9100 with ICS (so my firmware version is XWLPD). I will be using this tutorial to root my phone (How to Root Galaxy S2 i9100! [ICS][Android 4.0+] -on galaxys2root dot com) I am familiar with the basic terminology and also understand the principles of rooting. However, I do have a question about which CF-kernel am I supposed to flash. I found two of those (v5.3 and v5.4):
From the tutorial (i can't post outside links) - v5.3
And from Android authority - v5.4
Which one should i use and are they both ok with XWLPD firmwares?
(And don't I need an original kernel after the rooting? With previous tutorials, there was always an insecure and a secure kernel)
And after the device is rooted, what is the best thing to do? I am thinking: first I would flash Clockworkmod Recovery 4.0.1.4 (and backup my original ROM), and then install TITANIUM BACKUP for contacts, apps etc. Is that good?
I really appreciate all your help!
Click to expand...
Click to collapse
I am not sure about CF-Root, but I recommend siyah kernels because its safer. It should also work with your firmware version. If you are on 4.0.4, best not to have CF-Root and wipe data through CWM since you might brick your phone. CWM also comes with siyah
Sent from my potato.
I have 4.0.3.
Thank you for your answer!
however...
Well, this has confused me a little.
So instead of CF-kernel I should use Siyah kernel? (@ gohkanmoral dot com right?). And then flash it with ODIN 1.85. And that is it?
And CWM is allready a part of the kernel, so if power off my phone then i can reboot into ClockworkMod Recovery by holding down Volume Down, Home button, and Power button together?
I am sorry for my lack of understanding.
NomenNescio11 said:
Well, this has confused me a little.
So instead of CF-kernel I should use Siyah kernel? (@ gohkanmoral dot com right?). And then flash it with ODIN 1.85. And that is it?
And CWM is allready a part of the kernel, so if power off my phone then i can reboot into ClockworkMod Recovery by holding down Volume Down, Home button, and Power button together?
I am sorry for my lack of understanding.
Click to expand...
Click to collapse
Yes, u can use Siyah kernel V4.1.5 from www.gohkanmoral.com ( u should Dwnld the file from 'Download Tar (for Odin) link).
this kernel will root ur phone running Ics 4.0.3 and will also install the latest 6.x Recovery and also a dedicated 'CWM' app in ur app drawer which u can use to boot into recovery
Ps- its always better to clarify if in doubt rather than getting Stuck!!
Sun90 said:
Yes, u can use Siyah kernel V4.1.5 from wwwgohkanmoralcom ( u should Dwnld the file from 'Download Tar (for Odin) link).
this kernel will root ur phone running Ics 4.0.3 and will also install the latest 6.x Recovery and also a dedicated 'CWM' app in ur app drawer which u can use to boot into recovery
Ps- its always better to clarify if in doubt rather than getting Stuck!!
Click to expand...
Click to collapse
Thank you a million!! I would have surely downloaded v5.0. Well, I guess it is time to give it a try. I'll report when it is done. Hope this works!
Well, it worked like a charm! )
Now all I have to do is install a custom ROM.
Thank you again!
NomenNescio11 said:
Well, it worked like a charm! )
Now all I have to do is install a custom ROM.
Thank you again!
Click to expand...
Click to collapse
If you have problems while installing custom ROMs you can always ask in this thread and not creating a new one. Good luck
Sent from my potato.
the saga continues...custom roms...
So, I played with the root apps for a while, freezing bloatware etc.
Now it is time to install a custom ROM. So I went to INDEX of ROMs page. So since I have ICS 4.0.3, I can choose any of those? What is my best option? Use one of the Samsung based roms?
Your original ROM doesn't matter. Just make sure your kernel supports the custom ROM then it will work.
Sent from my potato running a potato.
NomenNescio11 said:
So, I played with the root apps for a while, freezing bloatware etc.
Now it is time to install a custom ROM. So I went to INDEX of ROMs page. So since I have ICS 4.0.3, I can choose any of those? What is my best option? Use one of the Samsung based roms?
Click to expand...
Click to collapse
the best way to say what is your best option is to try ROM by ROM
seriously, read the descriptions and choose the one that fits your needs, but before flashing new roms always do a nandroid backup, so you can restore your previous rom in case of troubles or if you just not like the new one
After reading over lots and lots of threads, I finally got up the courage to root my phone.
I followed these instructions: http://forum.xda-developers.com/showthread.php?t=1746181
I flashed the "Kernel + Modem + Cache + Rooted UCLE5 System Package" using Odin, downloaded Mobile Odin, and then flashed the safe Siyah 4.3.3 kernel w/o mic swap to avoid bricking due to the eMMc bug. Everything seems to be working fine. I have Superuser, Mobile Odin, and CWM Recovery.
My question is what are my ROM choices and how do I go about installing them?
I'f I'm reading the instructions correctly in the thread with the rooting instructions, I only have the three options for kernels in that thread and I MUST use a w/o mic swap version.
On the Siyah thread: http://forum.xda-developers.com/showthread.php?t=1592228, the only ROMs listed that work with w/o mic swap Siyah are Criskelo and UCLD3. Are these my only choices for ROM?
Are these the proper files for Criskelo?
Criskelo: http://forum.xda-developers.com/showthread.php?t=1500891&highlight=criskelo
I can't seem to find the files for UCLD3.
To be clear, I was coming from a stock i777 with stock ICS and UCLE5. I'm now running 4.0.3, I777UCLE5, 3.1.0-rc8-Siyah-v4.3.3-nomswap ([email protected]).
Thanks for any help. I've searched and read a ton, but I just can't make sense of it all.
You can use any rom you want. It will come with its own kernel and overwrite the one you have
Sent from my Galaxy Nexus
eerssco action-ev
Pirateghost said:
You can use any rom you want. It will come with its own kernel and overwrite the one you have
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
So this from the the first thread isn't true?
"You must use an ICS kernel, and it must work with Samsung firmware, and be the no-mic-swap version. If you install a Gingerbread kernel the phone will not boot."
Sorry, it's all a bit confusing to me.
dillon_b12 said:
So this from the the first thread isn't true?
"You must use an ICS kernel, and it must work with Samsung firmware, and be the no-mic-swap version. If you install a Gingerbread kernel the phone will not boot."
Sorry, it's all a bit confusing to me.
Click to expand...
Click to collapse
Then don't go and mess with your phone if you don't understand what you're doing. The information is not that complicated.
dillon_b12 said:
So this from the the first thread isn't true?
"You must use an ICS kernel, and it must work with Samsung firmware, and be the no-mic-swap version. If you install a Gingerbread kernel the phone will not boot."
Sorry, it's all a bit confusing to me.
Click to expand...
Click to collapse
Just do as Pirate says and you will be fine. Dont worry about the kernel because the rom you want will have the appropriate kernel packaged in
dillon_b12 said:
So this from the the first thread isn't true?
"You must use an ICS kernel, and it must work with Samsung firmware, and be the no-mic-swap version. If you install a Gingerbread kernel the phone will not boot."
Sorry, it's all a bit confusing to me.
Click to expand...
Click to collapse
it means that if you use an ALTERNATE kernel, which a lot of people like to do, then you must abide by those guidelines. all roms come packaged with a 'recommended' kernel....just flash one and you will see.
Pirateghost said:
it means that if you use an ALTERNATE kernel, which a lot of people like to do, then you must abide by those guidelines. all roms come packaged with a 'recommended' kernel....just flash one and you will see.
Click to expand...
Click to collapse
Thanks, that makes much more sense.
Ok, so for this ROM: http://forum.xda-developers.com/showthread.php?t=2005266
How do I do an EFS backup? I have searched this, but haven't found anything specific to this phone. Just want to make sure I am doing it correctly.
The next step is to do a FULL BACKUP. I did a backup in CWM Recovery. Does that work?
When I move the ROM to my phone, do I take the whole zip file? Is there any particular file(zImage?) I point to when flashing through CWM or is it the whole zip file?
Thanks again for all the help.
I successfully flashed SHOStock2.
Thanks for the help guys.
dillon_b12 said:
Thanks, that makes much more sense.
Ok, so for this ROM: http://forum.xda-developers.com/showthread.php?t=2005266
How do I do an EFS backup? I have searched this, but haven't found anything specific to this phone. Just want to make sure I am doing it correctly.
Use any EFS Backup App
The next step is to do a FULL BACKUP. I did a backup in CWM Recovery. Does that work?
Yepp that is a Nandroid backup
When I move the ROM to my phone, do I take the whole zip file? Is there any particular file(zImage?) I point to when flashing through CWM or is it the whole zip file?
Nope just keep the whole zip and select it in CWM
Thanks again for all the help.
Click to expand...
Click to collapse
See my replies in bold
dillon_b12 said:
I successfully flashed SHOStock2.
Thanks for the help guys.
Click to expand...
Click to collapse
Good choice for a first ROM. When you get bored with that Shostock3 is really nice but wait until 1.5 comes out. It has some fixes that will polish it up nicely.
Sent from my SGH-I777 using xda app-developers app
attsw said:
Good choice for a first ROM. When you get bored with that Shostock3 is really nice but wait until 1.5 comes out. It has some fixes that will polish it up nicely.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Would going to SHOStock3 require a wipe? I understand that upgrading to new versions of an existing ROM usually does not, but since this is a different ROM it seems like it would require the full wipe.
What is the easiest way to retain as many of my settings, etc... as possible when doing full wipes? I have Titanium Backup already. Is there another program that will help me retain more?
dillon_b12 said:
Would going to SHOStock3 require a wipe? I understand that upgrading to new versions of an existing ROM usually does not, but since this is a different ROM it seems like it would require the full wipe.
What is the easiest way to retain as many of my settings, etc... as possible when doing full wipes? I have Titanium Backup already. Is there another program that will help me retain more?
Click to expand...
Click to collapse
Yes on the full wipe before flashing the new ROM.
What else are u trying to retain besides apps and their data? If that's all TiBu is fine
brandonarev said:
Yes on the full wipe before flashing the new ROM.
What else are u trying to retain besides apps and their data? If that's all TiBu is fine
Click to expand...
Click to collapse
It would be nice if I didn't have setup e-mail everytime, but if I can keep my apps and their data with TiBu, that should be fine.
dillon_b12 said:
It would be nice if I didn't have setup e-mail everytime, but if I can keep my apps and their data with TiBu, that should be fine.
Click to expand...
Click to collapse
Once you get accustomed to it, flashing with a full wipe isn't too bad. Make a nandroid backup in case you decide to go back. And I would recommend you buy the full version of titanium back up to get the batch features, and support the developer. It is probably the most important app for those that flash regularly.
I can fully wipe and flash and have everything back up and running the exact same way it was in like 10 minutes. But I like the chance to start fresh
Hey everyone,
Sorry if the Answer was staring me in my face but I'm not sure about upgrading to the CyanogenMod because of the superbricking I might get..
If any help can be given as to whether I am safe to do it, it will be much appreciated, My android version is 4.0.4, Build number imm76D.XWLPT.
I have just rooted it with XWLPW-ROOT-CWM6, and It seems to have rooted fine.
Will be much appreciated if I can get any help as to whether I can Flash it with CyanogenMod and everything will be fine..
Thanks again
EDIT: Yeah I just realized about having the Superbrick bug, I must have a kernel that is not liable to bricking, I rooted it with PhilZ touch 3 and when I go into recovery mode it says CWM Base version: 6.0.1.8 at the bottom, Am I safe from the bug?
You're safe as long as you don't perform a wipe from stock recovery in 4.0.4 (and not all phones have an insane chip). So yes, you can flash CM.
Sent from the Matrix
Donnie Sins said:
You're safe as long as you don't perform a wipe from stock recovery in 4.0.4 (and not all phones have an insane chip). So yes, you can flash CM.
Sent from the Matrix
Click to expand...
Click to collapse
Thanks alot dude!
EDIT: Sorry, do you know which CyanogenMod I should flash? I just want to upgrade to one that is fully working, but there are many in the index and I dont know which one to flash :s THANKS!!
and If I dont do a wipe? wont it be stuck at boot as the Guide says it will?
I highly recommend you read the discussion thread for the version of CM you're wanting to try in General section. So you can get a handle on other people's experiences with it, bugs/flaws/annoyances/features/etc. I never flash a rom without reading the first 10 pages of those threads & the last two weeks or so worth of posts so I know what I'm in for.
I agree. And you always have to perform a full wipe if you change firmware.
Sent from the Matrix
Donnie Sins said:
I agree. And you always have to perform a full wipe if you change firmware.
Sent from the Matrix
Click to expand...
Click to collapse
yes thank you I will, but do I wipe my phone before I install CM? or..? during it..? I'm scared of this superbricking ^-^, I have flashed my GS1 before with no problems, but problems arose and I've been out of the game for a while, and have forgotten phones and roms etc for quite a bit ^-^
THANKS AGAIN
AndroidTerminator said:
yes thank you I will, but do I wipe my phone before I install CM? or..? during it..? I'm scared of this superbricking ^-^, I have flashed my GS1 before with no problems, but problems arose and I've been out of the game for a while, and have forgotten phones and roms etc for quite a bit ^-^
THANKS AGAIN
Click to expand...
Click to collapse
I assume you've read guides about how to flash a rom? Copy the zip-file to your phone, back up, wipe and flash.
You don't have to be scared of this superbrick bug because you're already running a custom kernel.
Sent from the Matrix
Donnie Sins said:
I assume you've read guides about how to flash a rom? Copy the zip-file to your phone, back up, wipe and flash.
You don't have to be scared of this superbrick bug because you're already running a custom kernel.
Sent from the Matrix
Click to expand...
Click to collapse
really? I'm running a custom kernel because I rooted my phone right..?
AndroidTerminator said:
really? I'm running a custom kernel because I rooted my phone right..?
Click to expand...
Click to collapse
You're running Philz-kernel aren't you?
Sent from the Matrix
Donnie Sins said:
You're running Philz-kernel aren't you?
Sent from the Matrix
Click to expand...
Click to collapse
Well, I was trying to root my phone so I don't think so, now that I think of it no, its only root and clockwork recovery mode thingymajig because file size only 7mb so if it was only root, my build number and everything is as same as before ^-^,
That's what I am so confuzzled about, I need to downgrade to a custom rom that must come with a custom kernel right to be able to upgrade to cyanogen right...? otherwise ill brick it?
No. Make sure you flash a custom kernel (for example Siyah) with Odin. Then there's no need to flash other firmware first before upgrading. Just wipe your device in CWM (after the back up), and flash the rom you want.
Sent from the Matrix
Thanks, thing is a lot of things are outdated like the guides, do you know if I can use the latest odin which is out that apparently is for the S3? I've spent two days trying to do research on this and im failing quite badly :'(
AndroidTerminator said:
Thanks, thing is a lot of things are outdated like the guides, do you know if I can use the latest odin which is out that apparently is for the S3? I've spent two days trying to do research on this and im failing quite badly :'(
Click to expand...
Click to collapse
Make sure you have kies installed or at least the drivers.
Reboot into download mode
Run ODIN 1.85
Flash Siyah kernel (.tar) via PDA section
Boot into recovery run backup
Wipe data/factory reset
Flash CM zip file.
TheATHEiST said:
Make sure you have kies installed or at least the drivers.
Reboot into download mode
Run ODIN 1.85
Flash Siyah kernel (.tar) via PDA section
Boot into recovery run backup
Wipe data/factory reset
Flash CM zip file.
Click to expand...
Click to collapse
YES, [email protected][email protected][email protected]! so so much, easy when explained like that, I'm knowledgeable and pick things up quickly but you have made this easier for me, thanks for the help DD: <3
AndroidTerminator said:
YES, [email protected][email protected][email protected]! so so much, easy when explained like that, I'm knowledgeable and pick things up quickly but you have made this easier for me, thanks for the help DD: <3
Click to expand...
Click to collapse
Btw, if you have any apps/appdata you need to restore after wipe you can restore them from your nandroid backup using appextractor.
Hi there,
I recently rooted my SII 4.0.4 to Kernel 3.2b8 but have found that I cannot view youtube videos/netflix. Searching around I found that I should root to a different kernel.
My question is do I unroot to 4.0.4 (some posts say this bricks the phone, should I go to 4.0.3?) or use Odin and go straight to Siyah 5.0.1?
Also if I were to upgrade to Jellybean from 5.0.1 would I have to unroot first or just upgrade?
I have tried looking in the noob guides but they don't seem to mention this scenario.
Thanks.
If your phone is already rooted, why not flash the CWM flashable version of Siyah you want to use ? But yes, you could go the 2nd option you mentioned (If you're sure that version of Siyah will fix the problems you're having; also make sure the version of Siyah you're wanting to use is compatible with the Android version of your current rom - check the Siyah threads to be sure).
MistahBungle said:
If your phone is already rooted, why not flash the CWM flashable version of Siyah you want to use ? But yes, you could go the 2nd option you mentioned (If you're sure that version of Siyah will fix the problems you're having; also make sure the version of Siyah you're wanting to use is compatible with the Android version of your current rom - check the Siyah threads to be sure).
Click to expand...
Click to collapse
To be honest, I feel quite over my head at the moment, I guess I will do what you said and use CWM to flash 5.0.1.
Thanks!
If you have CWM (attached to the current kernel you're running), might as well use it. Take Odin out of the equation (nothing wrong with Odin mind you, despite many n00bs being terrified of it for some reason, just no real need to use it if you have CWM).
MistahBungle said:
If you have CWM (attached to the current kernel you're running), might as well use it. Take Odin out of the equation (nothing wrong with Odin mind you, despite many n00bs being terrified of it for some reason, just no real need to use it if you have CWM).
Click to expand...
Click to collapse
I used CWM to go to 5.0.1 it worked perfectly thanks, can I now upgrade to Jellybean safely?
EDIT: realised that this basically overwrites the root and will have to root again on jb