I bought a Viewsonic g tablet on sale a year and a half ago and until this day it meets the light. (It was only touched when purchased then back to the box)
I followed the instructions to the letter (new on this) and everything seems to be working, I have a Malata zpad dock DS-A002 supposed to be fully compatible with the g tablet and I placed the tablet on the dock, connected HDMI in the TV but nothing happens.
Don't see an option in settings to select output to TV.
Many thanks in advance.
Forgot to mention, tried this on the TV which is an LG and monitor which is a Hanns-G
I have to say that this is a first so far. When I read this I went ahead a connected up my dock which is the same make and model as yours to my TV and it works. HDMI is sometimes a pain especially with the newer TV's that are out. You also got to have the dock powered up if you haven't done that. If the power cord is connected and the tablet displays the dock clock then connect the HDMI to the dock with the TV turned off. After connection is made turn on the set and make sure you are on the proper input. It should work, but if not try a different TV.
Sent from my Super BadA$$ Bionic.
Thanks for the reply
The LCD TV is a couple of years old, the LCD monitor is 3ish years old
My mother has a 5yr old LCD TV, that's another TV I could test on
The dock is powered up using the charger that came with the gTab
The tablet displays the dock clock when placed on the dock
I've tried different combinations:
Dock powered up, TV off and plugin cable, gtab on then place on dock, turn TV on
Dock powered up, TV off and plugin cable, gtab off then place on dock and power on, turn TV on when gtab is on the dock clock
Dock powered up, TV on and plugin cable, gtab on then place on dock
Dock powered up, TV on and plugin cable, gtab off then place on dock and power on
TV detects HDMI when the gtab is placed on the dock, but after 3-5 secs says no signal meaning it does detect HDMI (shows up as an option, I've tried on all 3 HDMI inputs btw) but it doesn't show up an image.
I've tried these methods in the TV and the monitor, nothing
Doesn't make sense to me since everyone in the thread hasn't had this issue, should be plug-and-play right?
http://forum.xda-developers.com/showthread.php?t=1900562
Should I backup the current install and go back to the stock crappy ROM just to test it out? (Wipe everything as instructed before doing so?)
Thanks
No since in going all the way back to stock to test it out. Have you by chance tried a different HDMI cable. You might have a faulty connection or even a dirty connection will make it loose its connection. You may also want to check to see if the TV has a default native setting set. The gtablet will display a image like a PC I believe. Will have to connect it up again to see what res. the device puts out at default.
Alright find the link up solution. I tried different ways of connection all with failure to display on my TV with the exception of this. Try it and you will be satisfied.
1st. Place you dock near your TV with power cord and HDMI cable both connected. Don't connect other end of HDMI cable to TV just yet.
2nd. Have tablet turned on and fully booted up. Then place tablet on dock and leave the dock clock displayed.
3rd. Turn on TV and set the input to the HDMI connection you are about to connect to. Then connect HDMI to that input that is in TV and the display should reflect the device.
Let me know if this works. Thanks.
Sent from my SmoOth A$$ Gtablet
Hi, yes I tried 2 different cables, different ports, cleaned up (blow air) into the TV and and dock ports (dock is brand new never used from a year+ ago)
I couldn't find a default native setting on the TV.
Really sucks that there is an awesome ROM for the gtablet and I can't use it on the bigger screen, intention was to watch Netflix and movies, besides reading
The tablet is one of those projects that never happened and when I finally manage to get it going this happens...:crying:
Read the addon that I posted. It will connect if you connect it in that order.
Sent from my DROID BIONIC using xda app-developers app
Hi Nobe, it still doesn't work. I just don't get it.
TV recognizes the connection (shows as plugged-in) but says no signal.
Unfortunately monitor is not as advanced as a TV, simply says no signal.
Faulty dock? It charges fine
Thanks
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
exmagus said:
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
Click to expand...
Click to collapse
I keep mine at 160dpi. The issue is that you have to connect everything to the dock before connecting it up to the TV. For some strange reason the dock settings doesn't recognize the connections being made. The dock works fine it is the drivers I believe that are kernel related. If you power up the dock with the HDMI connected to it, then place tablet on the dock, then connect the HDMI to the TV's input with the TV on and turned to that input. Then it should display onto the TV without issues. Done this multiple times when this came up and this was the only way for me to get the dock to display the output of the tablet.
Sent from my SmoOth A$$ Gtablet
The thing is I did exactly as you said multiple times to be sure.
Using SmoOth image does not come up
Restored to stock ROM and image shows up fine
I'm going to try a fresh SmoOth install and see how it goes or is there any way to check the drivers or make adjustments to it?
Thanks
Any advice on checking the drivers?
Thanks
Actually the drivers are there and working the way they are suppose to be. I do believe that it might in the way it is communicating with the TV still. I am currently working on something that might help out, but I want to test it fully before suggesting it since most everyone doesn't use this feature.
Sent from my SmoOth A$$ Gtablet
It is really odd that doing the same process on the stock rom works.
Thanks a lot for the follow-up Nobe
Curious if anyone found a solution to this problem? I too have the exact same issue with my Gtab even after trying the solution posted with different cables and such. Stock rom works fine though.
I'm wondering if Nobe found something
Related
my TF HDMI port not working, when i first conneted it to TV, showed sign of HDMI on on lower right side next to time and screen started flickering, since then i could not get any connection, I got another priem and tried it with same cable cgot connectted easily, i tried with 3rd TF, and it showed HDMI sign on TF with holding end of cable but no images on TV. MY original TF does not have any other problem, WIFI is very good, no light bleeding or dead pixel, GPS is working ( it is not great) .
I really do not want sent my TF to ASUS to screw it. I wipped TF and hoping it works but it did not.
I am getting new micro cable hoping it may works?
anybnody has any suggestion
Try another cable and/or TV first.
I did no changes.please help
I have this problem too. It was working and now its not. No HDMI icon in the right corner either.
Curses! I just discoverd this same issue tonight with my Prime. I started watching a movie with my daughers, then we had to pause for a crying fit (them, not me). Prime turned off while we got through it, once it came back on the hdmi wouldn't stay connected. The little symbol in bottom right kept flashing back and forth from on then off. And now finally nothing.
I rebooted and got nothing now. The issue isn't with my tv accepting my prime, but with my prime recognizing a cable being attached. I had to sometimes push it up and at an angle to get it to register.
No wifi issue, and I love it otherwise. I just hoped this was an easy fix. Maybe not.
K--
A data wipe did nothing to solve the problem. I ended up returning it for full refund.
Same issue here... I got to watch about 2 shows of the three stoges before it went out.
I then connected my evo using the same cable to the same HDMI port on the TV and works great.
Data wipe doesn't work.....
anybody?
I have a problem: when i put my phone onto the HD dock the phone recognizes the dock and the hdmi cord, asks me if i want to use the webtop or the entertainment center. I choose one of them i got nothing on the screen. The tv's hdmi works fine (with my laptop for e.g). i tried with a different cord, but nothing changed. i made a video of it (sorry for the quality): [i can't post urls, so if you're interested search on youtube for Motorola Atrix 4G HD dock probably faulty. Thanks]
Please help me, i don't know the solution. I have googled after it almost for a week!
I have Motorola MB860, at&t branded Atrix 4G, but it is unlocked, i use it in Europe. Got the latest firmware (OTA). Unrooted, unmodified.
Thanks
Add:
add: the hdmi just doesn't work without the hd dock. i attach the hdmi cord to the phone and select entertainment center, and i get blank screen on the tv.
select a different input on the TV perhaps?
I have like 6 different inputs on my TV and I had to go through each one and wait a little bit to make sure the signal kicked in.
I know it was connected through the HDMI port, but I still had to cycle through the inputs to get it to appear.
still weird
thanks for your answer. i didn't checked it, but i had an lg optimus 2x (p990) and with the lg's hdmi port worked correctly. i know i should wait a little bit, i have been waited for 3 minutes! so i'm starting to think my phone's hdmi wrong. can i test it somehow?
whats ur webtop version?
it is WT-1.2.0-110_OLY-6
System version is 4.5.141.MB860.ATT.en.US
Hi...sorry if this is the wrong place, but from my understanding they are the same phone and I didn't see any category specifically for the evo v...
At any rate, so I bought an ikross mhl to dvi adapter, hoping to connect my phone to an 18" LCD I have, but so far no luck with any of 3 monitors. I've connected the phone to a wall charger and tried hooking it up in different orders, to no avail...basically have followed every suggestion I can find.
I've now purchased an mhl to hdmi adapter from newegg for my TV and hopefully will at least verify the general functionality is working (when it arrives on the Monday following this post), but eventually would prefer it on the monitor. I also bought an HDMI to DVI adapter, just as a long shot.
I scoured google before I bought the adapter and every indication seemed like it should work fine, and now have scoured google + these forums again, but just not really finding much info related to my specific hardware.
The phone is rooted, running the latest Harmonia rom and is S-ON...I don't think that would affect it, as everything else on the phone so far has worked flawlessly, however, can't rule it out. There is a guide floating around on how to "turn the evo v into a evo 3d", so if this is rom-related, it's something to try? Requires going S-OFF, but even if it didn't fix anything, at least I'd get the radio updates. But again, from my understanding, the hardware is identical and this phone should be able to do standard mhl, so i assumed mhl to dvi should work as well, but I'm a little unsure about the standards...
Any insight is greatly appreciated and as I always do, if I find a solution, I will post
Still a no-go with an MHL to HDMI adapter, connected to my TV. The closest I came, was the phone went into dock mode if I didn't have the charger connected. Oh and if I unplugged the HDMI cable from the adapter, the TV would say check cable...So the TV was aware that a device was connected, thus it seems the issue lies in the phone.
Anybody have any idea what I could be missing? This /should/ work - the Virgin Mobile site even lists hdmi output as a feature of this phone, but no further mention in the manual and as I said in the OP, spotty info around the web
UPDATE: Just tried it with a monitor again, using an HDMI to DVI adapter, with the new MHL to HDMI adapter, and it almost wants to work - the monitor stays awake (not saying "no signal") and the phone registers that it's connected via hdmi, but the most picture I can get on the screen is but a flash when I change the phone's orientation =/
A second hdmi mhl adapter that I had ordered arrived today (was not expecting it for a month or I wouldn't have bought the other one...oops) and it works on the tv w/ full mirroring
Still a no-go on the monitor - it does the same as the other adapter. The phone and monitor both know it's connected, but only occasionally flashes of video appear and rather than any mirroring, the phone just says "play a video or slideshow" (which does not work).
So I guess the moral of the story: if you have an HTC EVO V 4G from Virgin Mobile (which is more or less the same phone as the EVO 3D) and you want to hook it up to a computer monitor: good luck! I mean, I'll test some more with other monitors on this new adapter but not getting my hopes up. Will post any positive findings, tho...
On the other hand, if you want to hook it up to a TV, it's just a matter of finding the right adapter...in my case, it was pretty much luck of the draw. One worked; the other did not. Maybe the other one will magically start working or will work with one of the new TVs I bought, but we'll see...
Anyway, here is the specific adapter that is working for me: not allowed to post links. Sorry! You all lose. Thank you spammers.
you also need to be on jellybean, or higher for the hdmi to work I do believe, otherwise the phone os if below doesnt recognize or work for hdmi out. the jellybean update made it so anyphone with micro usb out should be able to connect to hdmi with the mhl adapter.
I think its simply a matter of analog vs digital video signal. A computer monitor will need a digital video signal but a TV will be happy with either analog or digital. And I'd guess the output of the MHL adapter is analog.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Hi all,
Trying to output to TV - I have HDMI plugged into the TV and into the tablet using the HDMI port on the tablet but not seeing anything on the screen.
Is there anything I need to do to make the image output to the TV?
I am using a custom ROM - Woogy
Thanks
I am using the stock Rom. All I do is connect it as you have done and what ever is showing on the tablet is mirrored on the TV including sound.
I've not heard of Woogy. That may be your problem right there... All bets are off when you start using a non-factory OS.
I'm sure you had your reasons for the change to this ROM. You may want to investigate with the Woogy development community... Support of the HDMI is rather integrated to the OS.
AndroWook sorry
You might want to check what version of HDMI cable you have. I bought one from Amazon and it didn't work. Assuming the tablet or port was faulty, I RMA'ed it. Unsurprisingly, it was returned by Asus with a note saying "No fault found". It turns out that you need the correct type of HDMI cable, specifically 1.4. Look for "with Ethernet" in the description.
I bought a "with Ethernet" and it works great! http://www.amazon.co.uk/dp/B0060AU5MW
I have connected to the TV via HDMI using Androwook 2.2 and Stock / Surdu_Petru / Hund's Kernel, all have worked in 720p mode no problem.
Some cables are stiffer to plug all the way in.
I will check mine again when I get home. Didn't work though when I tried.
Sent from my C6603 using Tapatalk 4 Beta
Oh, and it was a 1.4 cable
Sent from my C6603 using Tapatalk 4 Beta
I would try a different cable first. It should be pretty straight forward after you plug it in. If another cable does not work, I would look into that custom ROM that you're using.
Asus_USA said:
I would try a different cable first. It should be pretty straight forward after you plug it in. If another cable does not work, I would look into that custom ROM that you're using.
Click to expand...
Click to collapse
Any idea on how to get the crop mode for HDMI back on 4.2? I see that ASUS has removed the feature...
My device no longer can go full screen when watching movies, and using it in general through HDMI...
sahilcc7 said:
Any idea on how to get the crop mode for HDMI back on 4.2? I see that ASUS has removed the feature...
My device no longer can go full screen when watching movies, and using it in general through HDMI...
Click to expand...
Click to collapse
I think there is no way to use crop mode in 4.2, btw in Mx player, you can still use "cut" and "zoom" mode, to watch the movie in real fullscreen. It work for me fine.
Be careful with the micro-HDMI port. Don't put too much strain on it. I have to position my cable just right to make it work now (My Prime is a year and a half old). I only use it to play controller enabled games on my TV though.
theandies said:
Be careful with the micro-HDMI port. Don't put too much strain on it. I have to position my cable just right to make it work now (My Prime is a year and a half old). I only use it to play controller enabled games on my TV though.
Click to expand...
Click to collapse
I have a similar issue with mine now. If it's not positioned properly the picture goes all fuzzy. I really need HDMI to work because we watch movies though the prime on the home theatre a few times a week!
You cant pick up the prime with hdmi plugged in or it will probably break. Has to be flat on a surface...
So flimsy...
Hi, I was hoping someone could help me please.
I recently purchased Samsung's smart dock to use with my note 3. It goes into dock mode when i sit the phone in the dock and i can control the phone using a wireless keyboard and mouse so the dock seems to be working as it should. Ive tried 2 hdmi cables on all 3 sockets on my panasonic viesa tv. I just cant get a picture on the tv.
I have tried all the obvious reboots, checking connections etc.
I can't see what the fault may be and I don't have another screen with hdmi input to test it with.
any advice would be appreciated.
Thanks
Did you plug in your power supply?
Yeah, plugged into power socket using all official Samsung cables plugs etc. It's driving me mad. I'm going to try it on a friends TV tonight. Hopefully it's just a compatability issue with my TV. But I use the hdmi inputs with other several other things as well without problems.
my note 3 is rooted on a tw rom.
So I tried a Samsung brand TV. Still no picture, so I installed stock firmware and tried again. Still nothing, so I guess I have a faulty smart dock or I have damaged my port on my phone. (It charges and transfers data fine without any problems).
I shall be exchanging the dock, but if that does not sort it I guess it's the port. If it's the port then I've voided my warranty by setting knox to 0x1.
Does anyone know how I would be able to test it, because it doesn't seem damaged to me.