Related
How does one go about removing them? I've done a google and XDA-Forums search and found that there are numerous answers all seemingly discounted by any number of people:
toothpaste, no good for capacitive screens
Displex sure, THEY say it's good for the TP2, but so many people say not
So, anyone have any ideas.
And, yes, I know, screenguards are great and the holy grail. I don't have one. So, please, I know I am asking for a cause that I probably could have prevented, but every time I put a screenguard on my device, it was much too mushy and I tried a lot of them.
Thanks in advance.
I would also like to know how to remove the scratches on the screen. The screen guards make the touch screen less sensative. Theres got to be some type of wax or something.
I've used the screen guard that came with my TP2 since day one. My screen is still pretty darn sensitive....
I have skinomi on my tp2 and although it takes alot of patience to put it works flawlessly...ive tried scratching it with keys and the thing just wont scratch!! its awesome..its a bit on the expensive side if you get the entire skin for the phone like i did but its worth the money in my opinion.
go to skinomi.com
I guess T-Cut might work, i used it on my dads samsung and it cleared up the screen some.
When i was a kid we used to wear swatch watches which always got scratched up, we used to use Duraglit made by Brasso which is a metal polish wadding...kinda like cotton wool with a light abrasive in it, which worked wonders!
Something with very light abrasive properties(like toothpaste) should do it but watch out for any solvents and chemicals in the product that may react with or even MELT the plastic!!!!!
most things like T-Cut scratch remover just take a lot of time and patience.
I anything works for you re-post and let us know!
Actually Displex tells you not to use its product on resistive touch-screens.
Anyway, I just ordered iDrops about a week ago and have been trying it for the last day with no results, at all. I've tried variable amounts of pressure, dozens of applications as the instructions say and I've only hurt my phone. All it does it put a strange texture on your phone that makes it grainy and more susceptible to scratches. Even my stylus scratches the phone, now! I had to use a wet cloth to get the graininess away.
My recommendation is not to bother with iDrops. It seems to not work for the TP2.
Hmm, its just an idea but I've been repairing my windscreen today using special resin that cures in direct sunlight. I must say it works pretty well, it's hard to notice the repair. I would try t-cut or other mild abbrasive to get rid of light scratches and fill really bad ones with that resin. Next comes a good screen protector to hide any imperfections.
thanks, but WHAT website
spammmer said:
if your touch screen is very scratch or broken, you can just buy the new touch screen and then replace it, it is easy to do. I also has instruction. you can visit my website.
thanks
Click to expand...
Click to collapse
I see your post, yet, I have no idea what website to which you refer. Nevermind, didn't realize it was in your header.
Why do you not send instructions with the order? IF you're selling replacement parts why then must a customer have to contact you for replacement instructions?
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Not disputing that fact
petard said:
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Click to expand...
Click to collapse
Just questioning that if they sell the parts, why must the instructions be emailed separately?
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
BBM-Lee said:
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
Click to expand...
Click to collapse
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
petard said:
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
Click to expand...
Click to collapse
Correct me if I'm wrong but changing this digitizer would void warranty if I were to change it myself ? ?
Go to At&t and see if they will replace it for you if you buy the digitizer. If not ask At&t or find a reputable place that does, ive seen for around $50 which was suggested to me by at&t. It's worth the money trust me! When I had my old LG Incite, I tried replacing the digitizer because my screen was scratched and ended up breaking the lock and camera buttons as well as the touch screen. Since then every phone i've had gets a case and screen protector from the day I lay eyes on it. If the case and screen protector are their after I get my phone I wont use it till their on. Scratches just annoy me but I guess i'm just odd lol.
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
But the upper half, around the edges, has took quite a bit of damage. Mostly chipped pieces and dents, partially because of me dropping it and also because the bodyguard I was using previously damaged it! It was one of those crappy snap-on ones. Will never get one again, just bought ghost armor.
Anyway my question is what is the best way to repair the chipped pieces and dents or is that piece sold somewhere so I could replace it? I have no experience replacing things on the phone but I'm sure if there's a tutorial anywhere it wouldn't be too hard for me. Besides I"m not trying to disassemble the entire thing just the upper portion without the screen.
Any help appreciated.
Showtime7 said:
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
Deleted stuff...
Any help appreciated.
Click to expand...
Click to collapse
Best option...Ebay>buy broken (software wise) TP2>use if for spare parts
hmmm the only cheap one I could find listed was also worn...
was hoping to profit because i will probably be selling my TP2 soon.
go to ebay and search touch pro 2 houseing case there about 80 bucks they come in balck and red and black and blue the are a little hard to swich over to but i did it and it worked out fine just takes about an hour tools and dremal if and only if ure useing the tp2 t7373
I am trying to locate a replacement front HW button (back key is either cracked or scratched and light shows through) - so, during the lcd repair process, is this button easily replaceable without getting too involved with any other components? Any suggestions or advice on what to do/where to locate this piece of plastic would be met with extreme gratitude!
Get a new housing from eBay.
Just be careful to get one that fits your version.
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
This is an excellent outer shell protector, gives better heft holding (IMHO), rubberized black, very lightweight. Just snaps on and off.
Auction ended, but locate seller store. My Tilt2 fit perfectly in the Touch Pro Verizon except camera button needed cutting shell (trivial task).
http://cgi.ebay.com/HTC-TOUCH-PRO-2...D-COVER-CASE-/130412358305?pt=PDA_Accessories
PDADoc said:
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
Click to expand...
Click to collapse
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
Click to expand...
Click to collapse
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
kosmarnik said:
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
Click to expand...
Click to collapse
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
Click to expand...
Click to collapse
Sorry man, but lern2internet. It's the first 4 hits on ebay. Just enter "htc touch pro 2 housing" and check 'worldwide'.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
eBay dispute process is tedious an long winded, but will lean towards the buyer in almost all cases. You just have to be patient.
PDADoc said:
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
On ebay? i suggest amazon.
rete said:
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
Click to expand...
Click to collapse
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Can use HTC TP2 housing on T-Mobile TP2?
PDADoc said:
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Click to expand...
Click to collapse
Hi there!
I've a T-Mobile Touch Pro 2 that is quite beat up too & I want to replace the whole housing.
Problem is where I'm living right now, the T-Mobile housing costs double of the standard Touch Pro 2 housing.
Is it possible to fit the motherboard, flex cable & LCD panel of the T-Mobile onto a HTC Touch Pro 2 casing with the power button?
I would need the touch screen & call/navigation buttons as well.
Please advise me if you know anything about this.
Thanks!
Konker
I'm afraid I don't know myself, but if you keep searching, I'm sure there is someone who's done it and knows for sure.
Take a look at this thread: http://forum.xda-developers.com/showthread.php?p=8580850#post8580850
Ok here is the issue. Ive had my Evo 3d Since release, yes its rooted and all the good stuff. But recently i started getting issues with everything from the lock screen ring not responding always to even ghosting of the touch screen. Basically things being selected when im not even touching it. Or when I try to text it wont always select the letters I chose or even numbers when trying to dial a number. I can reset it and it works some but then fails again. From my looking online this is a Touch screen and digitizer issue most likely. Anyone ever have any issues like this or hear of them? Im thinking of just buying a touchscreen and digitizer assembly and replacing it as I would prefer to keep my root (im rooted Via Revolution with 1.40)
Any tips or thoughts would be greatly appreciated. Thanks!! Also any suggestions on where the best place to get the parts for it would be?
constevens said:
Ok here is the issue. Ive had my Evo 3d Since release, yes its rooted and all the good stuff. But recently i started getting issues with everything from the lock screen ring not responding always to even ghosting of the touch screen. Basically things being selected when im not even touching it. Or when I try to text it wont always select the letters I chose or even numbers when trying to dial a number. I can reset it and it works some but then fails again. From my looking online this is a Touch screen and digitizer issue most likely. Anyone ever have any issues like this or hear of them? Im thinking of just buying a touchscreen and digitizer assembly and replacing it as I would prefer to keep my root (im rooted Via Revolution with 1.40)
Any tips or thoughts would be greatly appreciated. Thanks!! Also any suggestions on where the best place to get the parts for it would be?
Click to expand...
Click to collapse
Hi there, sorry to hear about your issue. I think the appropriate action will be dependent on your level of confidence and technical expertise. You can get the glass with the digitizer film for fairly cheap, but the removal and installation is tricky because it is stuck on via adhesive. If you think you can do that, Amazon, Ebay, or I can sell you one for a fair price. The other option is to get the glass, digitizer, LCD, and housing in one piece, you just swap your motherboard into it, and the part of the housing from your phone that has the serial numbers and what not on it. That would run you about 50 on Ebay. Maybe less, maybe slightly more. It is the far easier option technically speaking.
I had a digitizer problem on my EvO 3D and the Sprint store replaced it at the store for free.
But, after the change, Although the digitizer was better it too had the same problem in a smaller area of the screen.
So, it could be the screen and I happen to get two bad screens or it could be a problem with the phone itself.
Download from the market
Draw- Its great for seeing screen problems
Touch Test- It will show you where on the screen that has problem with multiple touch issues.
Thanks for the replies. I think I will get the glass, digitizer, LCD, and housing in one piece. I have plenty of skill as I work with small electronics and stuff like this for a living. BUT It just makes sense to replace them in one shot JUST IN CASE its the screen or the digitizer...
Sad Panda do you sell the glass, digitizer, LCD, and housing in one piece?
Or if anyone has a link to one from a reputable seller id be interested. Thanks!!!
Its the screen.I'm having the same issue right now.Took it to Sprint they didn't have any screens so they sent me a new phone..
constevens said:
Thanks for the replies. I think I will get the glass, digitizer, LCD, and housing in one piece. I have plenty of skill as I work with small electronics and stuff like this for a living. BUT It just makes sense to replace them in one shot JUST IN CASE its the screen or the digitizer...
Sad Panda do you sell the glass, digitizer, LCD, and housing in one piece?
Or if anyone has a link to one from a reputable seller id be interested. Thanks!!!
Click to expand...
Click to collapse
Unfortunately I don't. There is a guy I bought from that was pleasant to deal with on Ebay. If you are looking for a referral from one of us, which I can understand I will get in touch with him for you. The great thing about the option you chose is you can make all the visible parts of your phone look brand new again. I got one from him at auction for 49, I have even seen them cheaper. Ebay is a good place where you can deal with an American rather than worry about international shipping. Let me know if you want the referral.
Lol I also suggest cleaning the screen. Especially if you have a case thapt overlaps a bit. Whenever I've had a similar issue this was it.
Sent from my PG8610000 using xda premium
Sad Panda said:
Unfortunately I don't. There is a guy I bought from that was pleasant to deal with on Ebay. If you are looking for a referral from one of us, which I can understand I will get in touch with him for you. The great thing about the option you chose is you can make all the visible parts of your phone look brand new again. I got one from him at auction for 49, I have even seen them cheaper. Ebay is a good place where you can deal with an American rather than worry about international shipping. Let me know if you want the referral.
Click to expand...
Click to collapse
Yes i am looking for a referral from someone. if you could get in touch with him for me that would be awesome!!
Really have to get this thing fixed Asap. i pretty well live on it and its driving me absolutely mad...
Thanks a ton Sad Panda!!
bmtdan said:
Lol I also suggest cleaning the screen. Especially if you have a case thapt overlaps a bit. Whenever I've had a similar issue this was it.
Sent from my PG8610000 using xda premium
Click to expand...
Click to collapse
First thing I did was clean it. Still no good. Hell I can just sit it on the counter and watch it start doing its own thing. Or if I text it starts going berserk same with selecting phone numbers. Its got its own mind sometimes. Everything says its the screen assembly.
I had the same problem and the sprint tech replaced the digitizer/screen. It did not fix the problem. They replaced my phone on the spot with a gol' darned 1.50 version.
Rob the plumber said:
I had the same problem and the sprint tech replaced the digitizer/screen. It did not fix the problem. They replaced my phone on the spot with a gol' darned 1.50 version.
Click to expand...
Click to collapse
Sounds fishy. I suppose it is conceivable that you got unlucky and the port that connects the digitizer to the motherboard went bad, or maybe even something physically wrong in the bios region, but it does make you wonder if the tech only said he changed the screen and digitizer. Did you get that vibe rob?
Dropped my Atrix before i got me a casing for it.
I want to know how is the quality of the replacements glass wise is it still gorilla glass or?
I got my screen replaced at youbreak Ifix. The screen is identical, just be careful that it gets seated well or you will get a lot of dust under the screen..drives me crazy!
Sent from my MB860 using Tapatalk
If you haven't already bought one take a look at this at ebay,
http://www.ebay.com/itm/OEM-Motorol...052?pt=LH_DefaultDomain_0&hash=item3cc340bee4 .
It is the digitizer and frame assembly. I just bought one of these for mine and I gotta say that I could not be any happier. For one it is OEM. Another I didn't have to seperate the frame from the glass or mess with glue tape. It is a b!tch connecting the ribbon cable back to the mainboard. But other than that it is an easy repair.
Oh, it looks absolutely brand spankin' new.
i replaced my digitizer with a part i got from amazon, big mistake, it was so much worse, looked identical but was just aweful, luckily moto replaced it for free as now i didnt have a broken screen it was still under warranty! good as new now.
edit: also looking at that post above, if you are going to do it yourself having it come with the frame would be great as mine didnt, so i had to use a hairdrier to heat up the glue holding the digitizer to the frame, real PITA
Yeah you're right ears1991, it was nice and easy not having to worry with separating the glass from the frame and then reattaching the new one. My phone looks better than ever. On the very first day that I ever owned it I handed it to my 24 year old son and he immediately dropped it. It put a nice gouge it the glass so until now I have never really had an Atrix that looked new.
JdgM3NT4L said:
If you haven't already bought one take a look at this at ebay,
http://www.ebay.com/itm/OEM-Motorol...052?pt=LH_DefaultDomain_0&hash=item3cc340bee4 .
It is the digitizer and frame assembly. I just bought one of these for mine and I gotta say that I could not be any happier. For one it is OEM. Another I didn't have to seperate the frame from the glass or mess with glue tape. It is a b!tch connecting the ribbon cable back to the mainboard. But other than that it is an easy repair.
Oh, it looks absolutely brand spankin' new.
Click to expand...
Click to collapse
do you have instructions on how you fixed it or a youtube video, and also what tools did you need to fix it? my digitizer has been acting crazy and I need to replace it.
yea youtube video called
replacing atrix digitizer
from Repair universe
problem is thwy only show how to *completly disasemble it
they dont show how to put it back together
ltdanno360 said:
yea youtube video called
replacing atrix digitizer
from Repair universe
problem is thwy only show how to *completly disasemble it
they dont show how to put it back together
Click to expand...
Click to collapse
DONT USE REPAIR UNIVERSE! Horrible customer service, no phone support, slow ass shipping even tho I paid extra for next day (got it in same time as regular shipping) and gave me the run around when they sent me a defective digitizer first time. Took me nearly a month from order to get what i paid for and only after I threatened to notify BBB of their horrible service.
pre4speed said:
DONT USE REPAIR UNIVERSE! Horrible customer service, no phone support, slow ass shipping even tho I paid extra for next day (got it in same time as regular shipping) and gave me the run around when they sent me a defective digitizer first time. Took me nearly a month from order to get what i paid for and only after I threatened to notify BBB of their horrible service.
Click to expand...
Click to collapse
The queen has spoken yea they suck!
Sent from my MB860 using Tapatalk
quinto0827 said:
do you have instructions on how you fixed it or a youtube video, and also what tools did you need to fix it? my digitizer has been acting crazy and I need to replace it.
Click to expand...
Click to collapse
I watched this video and only needed a small phillips screwdriver and a prytool. I haven't found a video where they show it going back together... Just reverse the steps and you'll be ok. The only hard part was getting one of the ribbon cables back in place. And I gotta say that cable was a b!tch. But I have large fingers and I still got it. So if you have some degree of patience and aren't afraid of messing with tiny stuff go for it.
thanks a lot. i just ordered from the person you suggested from eBay. ill give an update when it comes on Thursday and I replace it.
Cool, I just took my daughters apart, it is dead. I thought that maybe if I disconnected and reconnected the mainboard that maybe it would help. No dice. But I did find that using a pair of locking forceps helped a lot with the cables. Actually it was really, really easy. So if you have a pair, or know someone who works at a hospital that can get a pair, it is worth the trouble. Good Luck.
i just fixed, worked like a charm. and you were right, those damn ribbon cables were a pain. i can finally type regular letters again. lol.
That's great. Was yours pretty much new looking? Mine looks great, there are two tiny dimples on the upper bezel but they aren't easy to see. It's still a 9/10.
Well, after being fairly sure-handed with phones, I dropped my Rezound on a tile floor and the screen has cracked in multiple places. Now, it should be noted that the picture is still fine, and the touch screen still works. Unfortunately, I don't have insurance because as I stated, I'm very good with phones. At this point though, I've come up with a couple different options. Potentially replacing the screen (I'm not sure if that's what I want to do because I'm not completely phone hardware savvy, and I don't want to waste money if I can't do it or screw something up), buying a new phone, or putting insurance on the line and sucking it up for a few weeks (not too fond of that, simply because I find that to be kind of a selfish move). I'm leaning towards getting a new phone, but I'm not sure what to do. I absolutely love my Rezound, but I'm a slight flashoholic and development hit a lull, though it's slowly beginning to come back it appears. I don't know if I should get another Rezound, or jump ship and get a GNex or GS3 or something different. Does anyone have any UNBIASED recommendations? Perhaps some direction to lead me in? I'm not looking to bash the Rezound or anything of the sorts. I love my phone, I love what the devs have done, and I have zero complaints unlike many others around here. I'm just a sucker for new hardware, and the GS3 just looks so tempting minus a few things.
TL;DR - Cracked screen, don't know if I should attempt to replace screen or get a new phone entirely (and which phone at that) or put insurance and wait to file claim
I would try and replace the screen... its not too hard if you buy the little tape from 3m that is used to adhesive and try to do it in a non dusty area
yojoe600 said:
I would try and replace the screen... its not too hard if you buy the little tape from 3m that is used to adhesive and try to do it in a non dusty area
Click to expand...
Click to collapse
Yeah I would say try and replace the digitizer as well. Thats about a $30 job
I would put some 3M packaging tape on it for a temporary fix, one strip right down the middle should hold it together and keep you from cutting your finger open until you can have it repaired.
bosox284 said:
Well, after being fairly sure-handed with phones, I dropped my Rezound on a tile floor and the screen has cracked in multiple places. Now, it should be noted that the picture is still fine, and the touch screen still works. Unfortunately, I don't have insurance because as I stated, I'm very good with phones. At this point though, I've come up with a couple different options. Potentially replacing the screen (I'm not sure if that's what I want to do because I'm not completely phone hardware savvy, and I don't want to waste money if I can't do it or screw something up), buying a new phone, or putting insurance on the line and sucking it up for a few weeks (not too fond of that, simply because I find that to be kind of a selfish move). I'm leaning towards getting a new phone, but I'm not sure what to do. I absolutely love my Rezound, but I'm a slight flashoholic and development hit a lull, though it's slowly beginning to come back it appears. I don't know if I should get another Rezound, or jump ship and get a GNex or GS3 or something different. Does anyone have any UNBIASED recommendations? Perhaps some direction to lead me in? I'm not looking to bash the Rezound or anything of the sorts. I love my phone, I love what the devs have done, and I have zero complaints unlike many others around here. I'm just a sucker for new hardware, and the GS3 just looks so tempting minus a few things.
TL;DR - Cracked screen, don't know if I should attempt to replace screen or get a new phone entirely (and which phone at that) or put insurance and wait to file claim
Click to expand...
Click to collapse
I'm in the EXACT same boat. Was getting a girl's number after the bar closed on Saturday night and she accidentally knocked it out of my hand. First cracked screen in 13 years of cell phone use. I started doing research and the parts seem cheap enough but the actual repair process seems to be an aggravation. So I'm debating $30 repair or $650 on new phone? The economics say go with a repair, but HTC's also forcing my hand on moving forward from the Rezound (since they don't want to release sources).
Just remember gnex specs are worse. That's all I gotta say.
Sent from my ADR6425LVW using xda app-developers app
Christopher3712 said:
I'm in the EXACT same boat. Was getting a girl's number after the bar closed on Saturday night and she accidentally knocked it out of my hand. First cracked screen in 13 years of cell phone use. I started doing research and the parts seem cheap enough but the actual repair process seems to be an aggravation. So I'm debating $30 repair or $650 on new phone? The economics say go with a repair, but HTC's also forcing my hand on moving forward from the Rezound (since they don't want to release sources).
Click to expand...
Click to collapse
Well after looking at a video of the repair process, I've decided that $30 is not a huge deal. The worst thing that happens is I screw up the phone beyond repair, at which point I have to get a new one anyway. At that point, what's an extra $30 when you're getting a new phone? The only downside, is there's no phone for a few days. Oh well.
cslingerland said:
Just remember gnex specs are worse. That's all I gotta say.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
This is completely true, but from a software perspective, there's a lot more development, many more options for flashing, and close to no hassle when it comes to updates. Though I love the latest hardware, and would have likely gone with the GS3.
I just got mine repaired at a place I found online cost me a little over a hundred.
Sent from my ADR6425LVW using Tapatalk 2
After breakingg mine for the 3rd time,
1st time I didn't crack it, I tore a piece of the connector that attaches to the glass, it disabled about half the screen, I was trying to paint the "red" buttons more red. Highly recommend you don't do this and just deal with it lol. I went to look for a replacement digitizer.
Found some pretty cheap like you guys, and I purchased one. When it came in I realized that it did not come with any kind of adhesive. This was tormenting. It took me about a week to finally get some special 3m "digitizer adhesive" from china. I proceeded to install it and it came out fine.
The following day I noticed that the digitizer was lifting on the left side, and that some dust had seeped up under the digitizer.
I then spent multiple days and hours trying to get the digitizer to stay, I went threw about three different adhesives, nothing had worked long enough.
2nd time I cracked the cheaped digitizer was be sheer force ;p, lol actually it was an accident. I was in the middle of applying adhiseive strips to the digitizer and I must have gotten a bit rough with it because it snapped in my had, I'm a big guy but I have seriously sensitive hands and can control what they are doing (im an artist). So the digitizer was just cheap as hell, because I had dropped the OEM on on cement a few times prior and it didn't even scratch.
So I was pissed and went to look for an OEM digitizer. Found one on eBay, and bought it, turned out not to be OEM, but it actually did look higher quality then the previous one so I kept it, I didnt pay much for it any way, and you will probably not find an OEM digitizer short of buying a new phone.
I had just about given up on trying to keep the screen down, and after so long and and about 5 hours of installing a new adhesive it turned out ok, but I had some light leaking from the left, and had to press the digitizer down to get rid of it, and that helped for about 5 seconds. Other then that it was ok, but I still kept getting damn dust.
3rd time, dropped it on my kitchen tile floor, lol. It was funny to read you dropped it on tile too. That was the end off it, I was no longer going to spend any more money on a damn digitizer.
TL;dr Read, make fun of me, Buy a new phone.
This was also the first time I ever cracked a screen by dropping it.
Sent from my ADR6425LVW using xda premium