[Q] Wiped internal memory in recovery - HTC One X+

Hey
Yea i did something stupid , never mind how.
Basically i tried installing CM 10.1 , messed up really bad beacause i got stuck in the boot logo etc etc.
Now i "somehow" wiped my internal storage and have no way to install a ROM , tried connecting via USB but nothing helps cannot seem to get my htc one x + detected.
So basically phones pretty messed up and unusable atm , need help
Thank You.
Yes i can boot into recovery.

It's a long shot, but try entering.download mode. Recovery is pretty much useless without a rom already on the internal memory
Sent from my GT-I9100
If I helped you, please hit the thanks button!

ramnex said:
It's a long shot, but try entering.download mode. Recovery is pretty much useless without a rom already on the internal memory
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
Enter download mode , how?
Isn't that only for the Samsung smartphones?

packtt said:
Enter download mode , how?
Isn't that only for the Samsung smartphones?
Click to expand...
Click to collapse
Okay listen
No worries mate, calm down
I've been in the same situation! But I had relocked my bootloader at this point - haha -.-
1. First of all, download haason's toolkit (THANKS!) http://forum.xda-developers.com/show....php?t=1994961
2. Download a proper recovery (Thanks Lloir!) http://forum.xda-developers.com/showthread.php?t=1995002
3. Get your ROM (I prefer ViperX+ Rom with Elite Kernel(Thanks to Team Venom and nik3r))
4. Run the .exe from haason's and install the HTC Drivers, this is important! (You're propably better of rebooting your PC)
5. Reboot into bootloader, connect it with Fastboot-USB!
6. Flash the new recovery!
7. Reboot Phone into recovery.
8. Now select advanced - and then ADB-Sideload
9. Go into haason's toolkit and choose from extra (bottom, right corner) "ADB-Sideload"
10. Choose your ROM
11. See what happens

Hurricanez said:
Okay listen
No worries mate, calm down
I've been in the same situation! But I had relocked my bootloader at this point - haha -.-
1. First of all, download haason's toolkit (THANKS!) http://forum.xda-developers.com/show....php?t=1994961
2. Download a proper recovery (Thanks Lloir!) http://forum.xda-developers.com/showthread.php?t=1995002
3. Get your ROM (I prefer ViperX+ Rom with Elite Kernel(Thanks to Team Venom and nik3r))
4. Run the .exe from haason's and install the HTC Drivers, this is important! (You're propably better of rebooting your PC)
5. Reboot into bootloader, connect it with Fastboot-USB!
6. Flash the new recovery!
7. Reboot Phone into recovery.
8. Now select advanced - and then ADB-Sideload
9. Go into haason's toolkit and choose from extra (bottom, right corner) "ADB-Sideload"
10. Choose your ROM
11. See what happens
Click to expand...
Click to collapse
Thanks for the reply , ill test this out and see how it goes

packtt said:
Thanks for the reply , ill test this out and see how it goes
Click to expand...
Click to collapse
Let me knw if it helped you out

Well i tried it , till the last step , chose the rom
Nothing happened , CMD popped up with a bunch of commands :\

packtt said:
Well i tried it , till the last step , chose the rom
Nothing happened , CMD popped up with a bunch of commands :\
Click to expand...
Click to collapse
Is your device detected?
Don't worrie if the command promp say "no device detected", close that windows and the toolkit will ask you for the ROM you wnat to Sideload.
Did you get to that point?
Have you been able to flash the new recovery?
That would mean, that your system already detected the phone

After step 7 adb push your rom to your phone then boot back into recovery and you should be good

namtombout said:
After step 7 adb push your rom to your phone then boot back into recovery and you should be good
Click to expand...
Click to collapse
The TWRP recovery from LLoir will automaticly install the sideloaded rom

Hurricanez said:
The TWRP recovery from LLoir will automaticly install the sideloaded rom
Click to expand...
Click to collapse
That's what !
I installed the recovery and everything fine.
I selected to push the ADB sideload , hit run > selected my rom , cmd popped up with debug stuff and a directly link , but no view about my rom being installed!

packtt said:
That's what !
I installed the recovery and everything fine.
I selected to push the ADB sideload , hit run > selected my rom , cmd popped up with debug stuff and a directly link , but no view about my rom being installed!
Click to expand...
Click to collapse
It should show up a percentage status
You got TeamViewer?
Check your pm.

packtt said:
That's what !
I installed the recovery and everything fine.
I selected to push the ADB sideload , hit run > selected my rom , cmd popped up with debug stuff and a directly link , but no view about my rom being installed!
Click to expand...
Click to collapse
Sounds like an invalid command, make sure there are no spaces in the name of the rom.
Sent from my HTC One X+ using Tapatalk 2

AndroHero said:
Sounds like an invalid command, make sure there are no spaces in the name of the rom.
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
thanks for the help everyone , but i did a full RUU and reset everything back to original.
So now its all good

For future notice Hansoons tool kit us typically worthless in these cases (and most others). You need to install the LATEST SDK from Google and run commands out of the "platform-tools" folder. As far as drivers go, you need to install the latest version of HTC sync and then plug the phone into the computer before ever modifying the phone.

Related

[How-to]Root Android 4.2.2 And Install CWM v6.0.2.3

Here We have the Root And CWM for Nexus 10 On Android 4.2.2!
Step 1 - Download Android SDK from the Android Developers website and install with USB drivers. See: How to Set Up Android SDK (Fastboot / ADB) on Windows.
Step 2 - Enable USB Debugging mode in your Nexus 10 tablet.
Step 3 - Download Fastboot and extract it in android-sdk-windowsplatform-tools directory. Create directory if not already there.
NOTE: Skip Steps 1, 2, 3 if you already have them.
Step 4 - Download SuperSU v1.04 (UPDATE-SuperSU-v1.04.zip) and copy it to your sdcard on your Nexus 10 tablet.
Step 5 - Make sure you have backup your data as it will be removed. Then switch OFF your Nexus 10.
Step 6 - Download recovery-clockwork-touch-6.0.2.3-manta.img and copy/paste it in the android-sdk-windowsplatform-tools directory.
Step 7 - Now go into Fastboot Mode on Nexus 10. How? Press Volume Down + UP + Power key for a few seconds till you see some text on the screen.
Step 8 - Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click > Open Command Prompt).
Step 9 - Type in the following command and press Enter.
fastboot flash recovery recovery-clockwork-touch-6.0.2.3-manta.img
Click to expand...
Click to collapse
Step 10 - Once completed, choose RECOVERY MODE from the Fastboot menu and enter Recovery Mode.
Step 11 - Then scroll down to “flash zip from SD card” and press the Power button to select it.
Step 12 - Press the Power button again and select “choose zip from sdcard”.
Step 13 - Now using your volume keys, navigate to the UPDATE-SuperSU-v1.04.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 14 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. Then Choose yes flash recovery back (this will make CWM your permanent recovery mode)
That’s it. Your Nexus 10 is now rooted on Android 4.2.2 JDQ39 software version of Jelly Bean and even has a custom CWM recovery installed. Check for the SuperSU app in your apps list to verify.
Root and CWM for Nexus 7
Root and CWM for Nexus 4
Reserved...
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
what do u want root or recovery??
AW: [How-to]Root Android 4.2.2 And Install CWM
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
I think you have to unlock your device first. Then you can easily install your custom recovery
how do I install TWRP now?
never mind was trying to flash a .TAR file this wayyy... figured it out. need a .img
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
mrdunlop said:
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
Click to expand...
Click to collapse
did it work for 4.2.2 ? i was rooted with 4.2.1 but the OTA screw it up.. i have to recover to factory .. then OTA to 4.2.2
could you please be more specific ? 
followed this method last night and got my tablet rooted with TWRP's recovery!
epunk said:
followed this method last night and got my tablet rooted with TWRP's recovery!
Click to expand...
Click to collapse
Glad that It's working!
Download Fastboot?
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
just did the same thing with my n7, worked out easily on my mac !
#1 thanks a lot dude
Mr_Jay_jay said:
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
Click to expand...
Click to collapse
http://www.mediafire.com/?lt8ghch95u5abgo fastboot files!
hope this one works :fingers-crossed:
I followed your method and got:
1.- Clockworkmod E:can't mount /sdcard/
2.- System stuck at Nexus X logo
What do I do now?
[update]
1.- Got factory image: https://developers.google.com/android/nexus/images#mantaray
2.- Ran "flash-all.bat" from the tgz
3.- Flashed recovery-twrp-2.4.2.0-manta.img
4.- TWRP asked if I wanted to install SU, I said yes
5.- Happy days.
Sorry if this has already been asked and I'm not understanding it.
I bought my mom a Nexus10 and it's missing some Indian fonts on it. I saw I need to flash on a fontpack to add them.
The tablet is totally stock, on 4.2.2..
Do I need to unlock the bootloader first (which wipes all the data) and then do the steps from the 1st post?
This whole process is not working for me. I am in windows 8 and it just doesnt let me install sdk nor even ask me to install drivers. Can you suggest what is the possible way out? I am unable to move ahead due to these issues :/
Root failed.
I followed all instructions (I have successfully rooted a number of smartphones and the Nexus 7 before this). The end result is that the Nexus 10 is unlocked, but hangs on bootup with just the X showing. I can't go into Recovery mode (I just get the Android lying on his back with an exclamation point showing and eventually it tries a normal boot - as far as the X).
I can't try Restart Bootloader as this, too, leads to just the X and hangs. I have reset the tab (power + down volume) and also have tried to reconnect the tab to the PC, which now does not recognize it, putting fastboot.exe and adb.exe out of reach. I think something might have gone wrong installing CWM, though it did boot up a couple of times after that with a couple of errors that passed by too fast to copy - before it started to hang. I never got a chance to put superuser on it as Recovery mode is out of reach. I tried a master reset the last time I got to Recovery Mode, but got several minor errors and now seem not to have ANY bootloader working. Short of sending the tab back to Google to have them restore a 'cherry' Android 4.2.2 (for a sum), I'm lost as to where to go next.
Any ideas?
s
paano po mag rooted ng myphone Rio fun
My recovery is lost when I did this!!!
I did this with adb....almost same step......now when try to go to recovery mode.....just logo......! I have to take battery out! so that I could boot into android.......when I accidently type -w which was for wipe,,,,,,,wiped thw whole phone..... now its just white screen when i boot into android......cant install new rom because recovery is lost.......what should I do now? help me please!
how to root s3mini 8200

LG_L9 P765: Root/Unlock Bootloader/ install CMW/ Install CM 10/11/AOKP/Packman

Hi, Guys today I m going to show you how to root/ unlock bootloader/ Install CMW recovery / Install cm 10/11/AOKP/ Packman roms on your Lg l9 p765 , This tutorial is for complete noob, nothing to worry about, just follow the process, you will find it very easy, so lets get start
Before going to start remember
Lg P760= Lg p765- Nfc chip ( So dont get confuse in nos)
Lg L9 kit
https://drive.google.com/file/d/0B62BCAo0zJcASk1xWkhCTnFhUUk/edit?usp=sharing
Above zip file contains all necessary files
1) Vroot application
2) Root files
3) CMW 6.0.4.5
4) Fastboot driver
5) Lg L9 Drivers
So Download it & Extract on Drive
Before going to do anything, You must install driver first, So just double click on Lg Driver.exe in extracted folder, Follow the process n ur done
Now lets root our Device
1) Now go to extracted, Double click on v root.exe, Install it,
2) Open Vroot Application
3) Now enable USB Debugging on your Handset, Go to developers options Enable debugging
4) Now connect your phone via Usb cable
5) V root will automatically detect your phone
6) Now hit on green root button,
7) Application will show you root succesfull n your phone will reboot ( or may be not)
8) After reboot you will find couple of chinese application installed, just ignore that, install super su from google play & unistall
those applications,
9 )Done, Now you have rooted phone
Next step is unlocking Bootloader
1) Now go to extracted folder, Find root files folder, copy folder & paste it in your system drive ( In my Case c Drive)
2) Now connect you phone with usb debugging on
3) Now double click on open commant prompt
4) Now u have to enter following command ( type or paste ur call)
adb reboot oem-unlock
hit enter, ur phone will reboot into botloader mode,
now press volume up to unlock boot loader, after pressing vol + u will enter in fastboot mode
means ur bootloader is unlocked, done
at this time ur pc will detect ur phone as androide device, it will install driver automatically, if dont, then go to device manager, select androde
device, right click, update driver first select search automatically, if this process failed then u have to select brows my computer option, then
navigate to fasboot folder in extracted folder, this will install fasboot driver on ur device, now ur ready to install recovery
Now its time to Install CMW recovery
1) when ur in fastboot mode dont power off
2) Now u have to enter following command to install CMW recovery
fastboot flash recovery recovery-clockwork-touch-6.0.3.1-p760.img
hit enter & Done, congrats now u succesfully Install cmw on ur phone
3) now enter fastboot reboot to restart ur phone
4) at this stage ur phone will be factory reset, so let the process complete
5) Now u can install CM 10 varients on ur device with this recovery
6) To install cm 11 varients u need to update recovery, for dat install super su & Goomanager on ur device
7) then copy cmw 6.0.4.5 zip on ur ext sd
8) then open Goomanger press reboot recovery, u r phone will be reboot into CMW recovery
9) now go to install zip/ install zip from ext sd/ find zip file/ & install its (use vol + & Vol - to navigate, power button to select )
10) reboot ur phone & Done, Now u have CMW 6.0.4.5 touch installed on ur device, u can check by rebooting ur device in recovery by
Goomanager
For latest recovery
http://forum.xda-developers.com/show....php?t=2733471
Now lets Flash Custom Roms on ur Device
Rom links:
http://forum.xda-developers.com/showthread.php?t=2712249
1) Download both files rom and gapps
2) Copy to ext sd
3) reboot into recovery ( goomanager method)
4) then select
wipe data/ factory reset then select yes wipe all user data, then go back
5) then select wipe cache partition, then select yes wipe, then go back
6) then select advance, select wipe dalvik cache, then yes wipe dalvik cache, go back
7) then select install zip choose zip from ext sd, select ur rom zip,then select yes install,
8) done, let the process complete, it will take some time, after installation complete, reboot ur phone,
9) after intial setup, reboot to recovery, this time dont wipe or factory reset anything, just install gapps zip, then reboot
10) Finally done donnna done done, u have custom rom on ur device, do whatever u want
Enjoy.....!!!!!!
Disclaimer: All material provided in this tutorial belongs to their origional owners, all credit goes them, like artas, dhiru, mateo1111,pedja, nx...etc, i m just explaining the process as per my experience,
Does P765 India V20C work with the method to unlock bootloader???
yupp, it works, i m also on same baseband
Sent from my LG-P760 using XDA Free mobile app
What sw you had before unlocking?
Droideking said:
yupp, it works, i m also on same baseband
Sent from my LG-P760 using XDA Free mobile app
Click to expand...
Click to collapse
Hi what sw version you had installed before trying to unlock bootloader? I have the same problem and I have V20i. Thanks
dr.David said:
Hi what sw version you had installed before trying to unlock bootloader? I have the same problem and I have V20i. Thanks
Click to expand...
Click to collapse
Sorry for late reply, I didnt install any new build, i was on stock jb build with V20c baseband, thats it,
n u need to be on latest stock jb build for unlocking bootloader,
above method works on almost any baseband
there are lots of different methods for unlocking bl for l9,
simple one is, (on device)
if u r rooted,
then install teminal emulater
open that
type "sudo"
hit enter
then type " adb reboot oem-unlock "
device will boot into bootloader mode,
press volume up, done
then follow rest of process, as above.......
I got this message
Droideking said:
Sorry for late reply, I didnt install any new build, i was on stock jb build with V20c baseband, thats it,
n u need to be on latest stock jb build for unlocking bootloader,
above method works on almost any baseband
there is lots of different methods for unlocing bl for l9,
simple one is, (on device)
if u r rooted,
then install teminal emulater
open that
type "sudo"
hit enter
then type " adb reboot oem-unlock "
device will boot into bootloader mode,
press volume up, done
then follow rest of process, as above.......
Click to expand...
Click to collapse
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
dr.David said:
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
Click to expand...
Click to collapse
sure u have rooted phone & super su & busybox installed
if yes then
again open terminal
type "su"
hit enter
accept su permission
then type
adb reboot oem-unlock
thats it
hope this time it will work.....
sorry for above post, sudo command can not use in this method
still no succes
dr.David said:
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
Click to expand...
Click to collapse
It doesn't work !
Maybe my bootloader it's encrypted. Donno...If you have any other ideas...I am open to sugestions. Thank you !
dr.David said:
It doesn't work !
Maybe my bootloader it's encrypted. Donno...If you have any other ideas...I am open to sugestions. Thank you !
Click to expand...
Click to collapse
ok,
try last time
this time dont use adb
just
reboot oem-unlock
try this, if dont work, will try another method
which l9 varient u have?
variant
Droideking said:
ok,
try last time
this time dont use adb
just
reboot oem-unlock
try this, if dont work, will try another method
which l9 varient u have?
Click to expand...
Click to collapse
LG L9 P760 aug/2013
sw: V20i-eur-xx
hidden menu boot-loader state: lock
I tried your last suggestion, the phone turned of and nothing happened
Thanks for your help so far
Updated P765 -v20C(Indian Version) to CM11 -Kang by Dhiru
Hi All,
First of all Thank you Droideking for the detailed guide for a noob like me. :good::good:
I have updated my L9 p765 Indian version with baseband version 20c (latest JB Update India) to CM11. I have used the ROM - UnOfficial CyanogenMod 11 [KANG] 11 by dhiru1602. The experience is awesome. The GUI is liquid smooth no lags unlike the stock ROM.:victory:
About the guide I would like to confirm that it worked absolutely fine for my Indian Version p765 with v20c baseband. There were no restarts encountered in fastboot mode. Only thing which happened was that when i was running adb command in the command prompt i got the error on command prompt saying adb is outdated please update. The error was gone when i ran the command prompt with run as admin option in windows. Also i used RomManager instead of GooManager as it was not available on playstore.
One more observation - Droideking, in the guide you have mentioned that install gapps after installing ROM and restarting the phone after completing setup. I followed the same but then i realised that RomManager was done as i did a reset and wiped the cache and done a reset. So had to download the RomManager apk on the sdcard and install to boot into recovery to install the Gapps. So i guess its better to install the Gapps soon after you have installed the rom in the recovery before restart.
Here are some of the screenshots of my p765..
Error during installation
When I choose install update from ext sd card and after that there is a error occur
The error is shown in picture...
Please help...
and when i use my stock rom unfortunately the process com.android.phone has stopped. is occurred.
Niket Saini said:
When I choose install update from ext sd card and after that there is a error occur
The error is shown in picture...
Please help...
and when i use my stock rom unfortunately the process com.android.phone has stopped. is occurred.
Click to expand...
Click to collapse
God saves you buddy, this problem occurs due to wrong recovery, recovery stops itself from installing rom, n saves you from bricking device,
install latest recovery, 6.0.4.8 or twrp latest release, below is the link
recommend twrp
http://forum.xda-developers.com/showthread.php?t=2733471
dont install 2nd int
by the way if u r flashing artas cm 11 build its not going to work, go for nameless by dhiru or mokee open by nx
cheers
shirodkar8 said:
Hi All,
First of all Thank you Droideking for the detailed guide for a noob like me. :good::good:
I have updated my L9 p765 Indian version with baseband version 20c (latest JB Update India) to CM11. I have used the ROM - UnOfficial CyanogenMod 11 [KANG] 11 by dhiru1602. The experience is awesome. The GUI is liquid smooth no lags unlike the stock ROM.:victory:
About the guide I would like to confirm that it worked absolutely fine for my Indian Version p765 with v20c baseband. There were no restarts encountered in fastboot mode. Only thing which happened was that when i was running adb command in the command prompt i got the error on command prompt saying adb is outdated please update. The error was gone when i ran the command prompt with run as admin option in windows. Also i used RomManager instead of GooManager as it was not available on playstore.
One more observation - Droideking, in the guide you have mentioned that install gapps after installing ROM and restarting the phone after completing setup. I followed the same but then i realised that RomManager was done as i did a reset and wiped the cache and done a reset. So had to download the RomManager apk on the sdcard and install to boot into recovery to install the Gapps. So i guess its better to install the
Gapps soon after you have installed the rom in the recovery before restart.
Here are some of the screenshots of my p765..
Click to expand...
Click to collapse
Glad to hear that dis tut help u to get in custom rom world, the major reason behind it was just rooting n unlocking bootloader safely, rest procedures can varies person to person as per experience
Droideking said:
God saves you buddy, this problem occurs due to wrong recovery, recovery stops itself from installing rom, n saves you from bricking device,
install latest recovery, 6.0.4.8 or twrp latest release, below is the link
recommend twrp
http://forum.xda-developers.com/showthread.php?t=2733471
dont install 2nd int
by the way if u r flashing artas cm 11 build its not going to work, go for nameless by dhiru or mokee open by nx
cheers
Click to expand...
Click to collapse
Thank you for your reply.
And i solve it that day it is due to cwm recovery and atras rom need twrp recovery.
now i am using [AOSP]ParanoidAndroid4.42-FINAL.
Is nameless and mokee is better than paranoidandroid rom?
please give me suggestion
Niket Saini said:
Thank you for your reply.
And i solve it that day it is due to cwm recovery and atras rom need twrp recovery.
now i am using [AOSP]ParanoidAndroid4.42-FINAL.
Is nameless and mokee is better than paranoidandroid rom?
please give me suggestion
Click to expand...
Click to collapse
nameless, much stable, n support, i almost tried every rom on this forum and end up at this, grt rom...
Hotspot
Droideking said:
nameless, much stable, n support, i almost tried every rom on this forum and end up at this, grt rom...
Click to expand...
Click to collapse
Hey i want to know in nameless rom's hotspot is working properly and is there any problem regarding wifi Bluetooth or other fuctions...
please give me suggestion..
because in panandroid rom hotspot is not working
yupp, it works flawlessly
Sent from my LG-P765 using XDA Premium 4 mobile app
Hiw to move an app to sd
Droideking said:
yupp, it works flawlessly
Sent from my LG-P765 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey, sorry to disturb u but i have an issue in nameless rom i know ur not a developer or senior member but i think u hv the solution of my problem.
My problem is I'm not able to move my apps from phone memory to sd card in nameless rom i used other apps to move but when i open the app and click on move it goes to apps info and there is no button to move to sd...
please help....
Hey guys,
Can you help me please? Can't find a way to unlock the bl for my frickin L9.
Device is already rooted.
P760 v20i-eur-xx
Thanks
Sent from my LG-P760 using XDA Free mobile app

Failed at installing custom rom (HTC One X+)

hi guys
I tried to install a custom rom on my HTC One X PLUS. I am new to this and it looks like i kinda screwed up. i used "HTC One X+ AIO Kit By Hasoon2000 v2.3". I have now this "CWM-based Recovery v6.0.2.7" on my phone. i can't boot the normal OS anymore. everytime i reboot, this cwm recovery shows up. when i try to install cyanogenmod (cm-11-20140705-NIGHTLY-enrc2b.zip) by "install zip from sdcard => choose zip from sdcard ==> ..." i just receive:
Code:
set_metadata_recursive: some changes failed
E:Error in /sdcard/0/cm-11-20140705-NIGHTLY-enrc2b.zip
(Status 7)
Installation aborted.
i have no idea what to do. can anyone pls help? is it still possible to reset everything to get my phone working again?
Flash the latest version, older ones can't flash kitkat ROMs
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.8-enrc2b.img
Sent from my One X+ using Tapatalk
Phoenix09 said:
Flash the latest version, older ones can't flash kitkat ROMs
Click to expand...
Click to collapse
How can i do this? i can't put the file on my phone because my phone doesn't have a sd card.
Hutschi93 said:
How can i do this? i can't put the file on my phone because my phone doesn't have a sd card.
Click to expand...
Click to collapse
check this out http://forum.xda-developers.com/showthread.php?t=2066390 read it all, the part you need is adb sideloading, again, read it all at least a few times
leefear said:
check this out http://forum.xda-developers.com/showthread.php?t=2066390 read it all, the part you need is adb sideloading, again, read it all at least a few times
Click to expand...
Click to collapse
i already tried that, but all i get is this error:
Code:
* failed to write data 'protocol fault (no status)' *
my phone is in this "sideload mode" and i changed the filename into one word (that's what i should do if i get an error)
Hutschi93 said:
i already tried that, but all i get is this error:
Code:
* failed to write data 'protocol fault (no status)' *
my phone is in this "sideload mode" and i changed the filename into one word (that's what i should do if i get an error)
Click to expand...
Click to collapse
did you flash the recovery that phoenix suggested?
leefear said:
did you flash the recovery that phoenix suggested?
Click to expand...
Click to collapse
how? i just can open this cwm based recovery mode or this strangely HBOOT mode. but my computer doesn't really recognize it. if i open the device manager i see it under "ADB Interface" as "HTC Bootloader" but if use "adb devices" in command prompt my phone does not get recognized. the toolkit doesn't recongize it either.
OK guys i got my computer to recognize my phone in recovery mode. i can use adb push to transfer files to my phone. do i have to flash a new recovery or can a just put a new rom on my phone and try installing that?
EDIT:
OK GUYS! thanks to that i got my computer to recognize my phone i could flash the recovery phoenix suggested! and i finally could install my rom! thank you sooo much guys! you are my hero and made my day! i would give you a hug if i could but i guess nobody of you lives in switzerland
love you guys! (no homo)
Hutschi93 said:
OK guys i got my computer to recognize my phone in recovery mode. i can use adb push to transfer files to my phone. do i have to flash a new recovery or can a just put a new rom on my phone and try installing that?
EDIT:
OK GUYS! thanks to that i got my computer to recognize my phone i could flash the recovery phoenix suggested! and i finally could install my rom! thank you sooo much guys! you are my hero and made my day! i would give you a hug if i could but i guess nobody of you lives in switzerland
love you guys! (no homo)
Click to expand...
Click to collapse
glad u got it working bud!

[HELP] How to change ROM from 21s for noob?

Hey!
I have Stock China 21s installed and it's pretty well, but it has a lot of LeTV Apps, which I don't want to have.
And here is the question, what I have to do? I don't know how to install TWRP etc.
Can you give me some tips for newbie? How to install new custom ROM? Cuoco/Mokee/CM13 which is the best?
PLEASE HELP
Emokah said:
Hey!
I have Stock China 21s installed and it's pretty well, but it has a lot of LeTV Apps, which I don't want to have.
And here is the question, what I have to do? I don't know how to install TWRP etc.
Can you give me some tips for newbie? How to install new custom ROM? Cuoco/Mokee/CM13 which is the best?
PLEASE HELP
Click to expand...
Click to collapse
Now with the last nightly mokee is the best very complete
Try this guide
http://forum.xda-developers.com/le-max-2/development/twrp-root-14s-rom-x820-t3382221
If you're a newbie, then I suggest to go for Cuoco92. He realeased an automated tool to flash TWRP and Cuoco92 18s Chinese Rom.
Be aware that this process will wipe all your data before flashing TWRP and ROM.
Enable USB debugging, connect the phone to your computer and then start LE_X2_fastboot executable. Don't remove your phone from the pc during the process!
When is done, you will see a prompt to press a button, this will reboot your phone. Only then you should disconnect your phone.
From there, you can flash whatever you want through TWRP.
Download here:
https://www.androidfilehost.com/?fid=529152257862669609
Star_dust6 said:
If you're a newbie, then I suggest to go for Cuoco92. He realeased an automated tool to flash TWRP and Cuoco92 18s Chinese Rom.
Be aware that this process will wipe all your data before flashing TWRP and ROM.
Enable USB debugging, connect the phone to your computer and then start LE_X2_fastboot executable. Don't remove your phone from the pc during the process!
When is done, you will see a prompt to press a button, this will reboot your phone. Only then you should disconnect your phone.
From there, you can flash whatever you want through TWRP.
Download here:
https://www.androidfilehost.com/?fid=529152257862669609
Click to expand...
Click to collapse
It's gonna be rooted?
Emokah said:
It's gonna be rooted?
Click to expand...
Click to collapse
Yep, you'll get also SuperSU.
Star_dust6 said:
Yep, you'll get also SuperSU.
Click to expand...
Click to collapse
Ok and I can start tool when I'm on 21s?
Emokah said:
Ok and I can start tool when I'm on 21s?
Click to expand...
Click to collapse
Yes. As I said, the process will delete everything.
Star_dust6 said:
Yes. As I said, the process will delete everything.
Click to expand...
Click to collapse
Thank you very much! I'm gonna try this tommorow! Again thanks!
@Star_dust6 thank u very much again! I did everything what u say and it works! I've got now 21s with SuperSU!
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-max-2/development/stock-eui-5-9-21s-stable-china-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Will this work if I have an LeEco Max 2 x829 instead of 820?
I installed and ran the LE_X2_fastboot.exe and it stops near the beginning saying device not found.
All I want is a run of the mill Andriod 6.0, not their eUI.

Any beginner friendly guides on unlocking bootloader and installing TWRP etc.?

Hey guys,
I'm still running the stock EUI ROM and getting pretty sick of it.
I've looked at getting my bootloader unlocked and installing TWRP but it seems pretty complicated for this device and what information I could find didn't work for me.
Can anyone show me some noob friendly guides on getting this done?
Much appreciated!
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Qron said:
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Click to expand...
Click to collapse
Wow, I didn't know that's how you unlock the bootloader. Sorry like I said I'm not very familiar with this device yet. Thanks!
As far as using fastbood commands I tried that but the drivers didn't seem to work on my PC. I couldn't get any of that to work. But I'll keep trying.
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Qron said:
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
Click to expand...
Click to collapse
I had a Nexus 5 I was using on this PC I'll try removing all those drivers. Thanks.
valy_cta said:
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Click to expand...
Click to collapse
Windows 10 here. Does that make it more difficult?
greenManGaming said:
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
Click to expand...
Click to collapse
Hey, this looks really good!
Thanks I will definitely give it a read and try to get this sorted. I'm pumped to get that CM 14.1 ROM when it gets a few more of the bugs sorted.
thielek said:
Windows 10 here. Does that make it more difficult?
Click to expand...
Click to collapse
No, actually you need to disable the signature verification if I recall it right. I can't find the thread for win10 driver installation right now but for sure I have seen it on xda for LeMax2
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
thielek said:
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
Click to expand...
Click to collapse
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Emokah said:
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Click to expand...
Click to collapse
Cool I'll check that out.
Any idea what the best CM ROM is right now?
If I backup after Ive flashed twrp & want to restore on Mokee rom?Im on stock eui 19s & also Can I flash rom placed on internal storage?Coz it's showing storage as encrypted
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
This 5 steps:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
unlocks you Bootloader, installs TWRP and installs Cuoco92 with root and everything included.
You can install new ROM like 21s and just flash SuperSu zip to get it.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
RISHI RAJ said:
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
Click to expand...
Click to collapse
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
manishsoni7689 said:
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
Click to expand...
Click to collapse
check 3 posts up

Categories

Resources