Hi all,
I have a small problem with MROM built 20130113 - i have set mobile data limit set for 4MB and I'm unable to change it and it reduces my network speed to 300Kbits - any idea how to get rid of it?
I was just looking up the same thing. I did find this on how to fix it. It would be nice if it the fix was already in the ROM itself.
How to change Data Usage Policy - CM7
I don't know what I would be doing so I don't want to do it. I would expect that someone has a fix out there but I don't know where to find it.
Thanks, based on this thread I've managed to get rid of it
Shortly:
changing settings.db entries:
throttle_threshold_bytes --> added 000 in the end of the value - now have 3GB
throttle_polling_sec --> changed to 0 to get rid of notification
It worked, but I downloaded the file on my PC and used this program to edit:
http://sourceforge.net/projects/sqlitebrowser/?source=dlp
Then uploaded it back
After that i got myself bootloop (continous, blinking, booting screen) - fixing permission in recovery solved that
stingu said:
Thanks, based on this thread I've managed to get rid of it
Shortly:
changing settings.db entries:
throttle_threshold_bytes --> added 000 in the end of the value - now have 3GB
throttle_polling_sec --> changed to 0 to get rid of notification
After that i got myself bootloop (continous, blinking, booting screen) - fixing permission in recovery solved that
Click to expand...
Click to collapse
What folder did you look in? My data folder has some stuff but I can't find the settings.db
Edit:
Nevermind I found it.
Related
This is my first post, so apologies if this is in the wrong place or has been asked before (I have searched and found some answers, but none of these worked)
Basically, last night whenever I tried to use an application on my HTC HD2 I was getting the following error message:
"The file xxx cannot be opened. Either it is not signed with a trusted certificate, or one if its components cannot be found. If the problem persists, try reinstalling or restoring this file."
In searching for the solution, a lot of people are saying that I need to edit the reistry. (Specifiaclly HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1)
I have tried downloading the recommended registry editors on the forums (Resco Explorer etc.) but am unable to install because the "program is from an unknown publisher." I click yes to get pass this initial message, like I always have done in the past, and the following is displayed:
Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate."
I have also tried using a program recommended called CeRegistryEditor and using my PC via ActiveSync to edit the registry, but am getting an error message "Access Denied!".
Does anybody know any other way of editing the registry? Am I actually doing the right thing? Are there any security settings that I need to disable to allow CeReistryEditor to edit the registry?
This is really bugging me, I have only been without my apps for about 12 hours throughout the night but it is hard to live without them!! I REALLY don't want to perform a hard reset and will do anything to avoid this!
When I get this I just remove evertyhing to do with it on the phone and re download it (the cab file usually) and it seems to work.
thanks for your reply. I have tried this but when I try and reinstall I am getting the message: Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate.
I think that the security settings have been changed, but I cant see how to change them with editing the registry which I am struggling to do
Can I ask what app you are trying to install? Or is it any app?
Multiple Apps that were running OK yesterday, but not today. I think it is all the apps that I have downloaded from Omarket.... Omarket isnt working either!
Hi,
Any luck on this. I m also facing similar issue after installing Android on my HD2.
I have the exact same issue after running Android from SD card. No application (non-stock ones) are working anymore. Like 3rd party certificates are being blocked or something...
For everyone with this problem, download Mobile Registry Editor and connect your phone to your PC via USB, then start the Editor and go to "HKEY_LOCAL_MACHINE\Security\Policies\Policies" and search for the DWord "0000101a" and change the decimal to "1", that will fix your problem. This problem happens to me if I "reboot" while in Android instead of turning the phone completely off and then back on.
Edit: Added link to download.
As a side note, I always did this to mine while running Windows Mobile, then booted Android after fixing the registry.
and when this is not possible
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Niine said:
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Click to expand...
Click to collapse
Hi,
I also have the same issue after loading android from the sd-card. I have also re-installed the stock rom and the problem still persists. Im also unable to install any reg editors as keep getting the "not signed with a trusted certificate".
I read that a cooked rom may be a solution around this but I liked the set up I had and wanted to keep my original rom so any other suggestions would be appreciated.
Thanks
Lee
Exactly the same problem.
Non-stock programs not working after failed boot of android from SD card, and I'm unable to change any registry entries either. Practically I'm locked out of my phone, just the basic functions working. Any help would be greatly appreciated!
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
I have the same problem, just remove the program that was not working, pull out your memory card , then delete the files in the sd card except the application installer, hard reset your phone, and remember to go to SETTINGS-UPDATES&FEEDBACK-ERROR REPORTING-DISABLE ERROR REPORTING, and turn off your phone, put in the memory card and turn your phone on and install the application one by one, the application installed will work as normal, Good Luck, remember to back up your data before hard reset
larrytango said:
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
Click to expand...
Click to collapse
i tried this methode but unfortunately this message pops up all time:
"phone is not unlockable"
Hi, All!
I am running VR12.0 on my HERO which is quite nice and stable. But there is one strange problem. Android do not have Novosibirsk(3rd biggest city in Russia) time zone in settings. Since we have DST I have no alternatives to set and forget.
So I've decided to found out how to add my own tz in Android.
But I was surprised that tz "Asia/Novosibirsk" does exist in /system/usr/share/zoneinfo files, as it does in /system/etc/WPDB.zip files. Later I found one more file(s) - /system/etc/timezones.db (/etc/timezones.db).
I was almost sure that correcting this one is the right way, partly because on the internet one guy solved his problem (incorrect tz with updating this file). I opened it with sqlite viewer and saw that exactly list which is in setting menu. Added a record for Novosibirsk with timezoneId "Asia/Novosibirsk", uploaded file to HERO (both /system/etc and /etc - not sure if one is enough), rebooted, wiped Dalvik cache, but ... no luck Novosibirsk still absent... I also tried to modify existed record in that file to Novosibirsk's one but the result is absolutely the same - no N-sk ....
Does anybody have any thoughts about what is wrong? How to add my tz?
I have a Mini Pro and want to change the timeout for the keyboard backlight. I have come across an entry in the X10 forum which talks about changing the parameter in the /sys/module/keyboard/parameters/brl_timeout file. The problem is that after reboot this file gets overwritten and reads 300 again. I have tried changing the permissions to make it read-only but it still doesn't work
On the X10 forum someone suggested to go to sys/devices/platform/msm_pmic_misc_led.0/ and put a 0 in the 'brightness' file and save it. However this file doesn't exist on the Mini Pro.
Anyone have any other ideas?
Bump
I would be interested too. It shouldn't be necessary to switch off the light at all since it is only 3-4 LEDs ...
I have upgraded my atrix to 2.3.6 build 4.5.141 OTA and found that the app Bluetooth file transfer can not see files on other connected device, then I go to setting\wireless\bluetooth... and found that the discoverable check box can not be ticked! If bluetooth is on, the bluetooth adress is 00:11:22:33:44:55. Is that the problem related to this 4.5.141 build? Any help is appreciated
PS I've tried the PDS partition fix before upgrade but that time not solved my problem of top part touch screen unresponsive to touch.
Hello,
I'm from Brazil and my English is not so good, so if you do not understand something, please let me know.
First you need to root access, and install the SQLite editor.
Turn off the Bluetooth, then go to SQLite editor --> search for "com.motorola.android.providers.settings" --> settings.db --> settings
*Find the line: "bluethooth_discoverable_on", this is the line 135 here.
*Change the value to “1”.
*Reboot.
Now the most important part: go to Bluetooth settings, click to check discoverable, asap click in the box below, then set the time you want, but do not press the option "Never", this is the option that is causing the problem.
If you want, you can change the value back to “0”, however nothing changes here.
Am having the same problem
Hello Jmisturini. Thank you for the advice you gave. I have folliwed the steps, but the " com.motorola.android.providers.settings" --> settings.db --> settings" is missing in the list displayed by SQLite Editor. I have recently done an upgrade. I don't know if that's why mine is mot visible. Pls advice what next I should do. Thanks.
HELLO GUYS BEEN LOOKING THROUGH MY DEVICE STORAGE AND NOTICED A FILE NAMED MTKLOG AND ITS A LARGE FILE AND HAS 4 OTHER FOLDERS INSIDE,aee-exp,config,mdlog,mobilelog..can someone explain what they are and are they needed.
is it safe to delete contents as it is 16.4GB.
thanks
deleting MTKlog folder
sas007 said:
HELLO GUYS BEEN LOOKING THROUGH MY DEVICE STORAGE AND NOTICED A FILE NAMED MTKLOG AND ITS A LARGE FILE AND HAS 4 OTHER FOLDERS INSIDE,aee-exp,config,mdlog,mobilelog..can someone explain what they are and are they needed.
is it safe to delete contents as it is 16.4GB.
thanks
Click to expand...
Click to collapse
Even I have a folder named MTKLOG. It is related to some mobile logging utility. I do not remember how I activated the mobile logs. The device storage got full within two days of activating the logs. Have you deleted the folder?
milindlokde said:
even i have a folder named mtklog. It is related to some mobile logging utility. I do not remember how i activated the mobile logs. The device storage got full within two days of activating the logs. Have you deleted the folder?
Click to expand...
Click to collapse
yes safe to delete
Thanks
sas007 said:
yes safe to delete
Click to expand...
Click to collapse
Thanks. I deleted the logs. It was the "system logger" that created the logs. It started again after deleting the logs as it found space for logging. I stopped all logs and also cleared all old logs from the options in "system logger". I even reduced the space required for each type of logs to 5mb each just to be safe, which were 300mb each initially.
I still do not know how to start/stop the "system logger" or its exact location, but my purpose have been served. I will post it if I find it again.
milindlokde said:
Thanks. I deleted the logs. It was the "system logger" that created the logs. It started again after deleting the logs as it found space for logging. I stopped all logs and also cleared all old logs from the options in "system logger". I even reduced the space required for each type of logs to 5mb each just to be safe, which were 300mb each initially.
I still do not know how to start/stop the "system logger" or its exact location, but my purpose have been served. I will post it if I find it again.
Click to expand...
Click to collapse
Hey,
I face the same problem. do you please guide me from where i can configure 'system logger'?
Thanks,
Ankit
I am no expert but can't you just deactive it in the enginner mode?
ColonelZap said:
I am no expert but can't you just deactive it in the enginner mode?
Click to expand...
Click to collapse
You have a very good Android Jelly Bean OS system, but I get the feeling every Manufacturer does their own subtle unique OS because I can't find that.
I have a tablet that is similar to the JXD p1000 tablet, but it's generic, no branding. Definitely has the same specs.
But I have the same MTKLOG problem. How do you turn it off?
sas007 said:
yes safe to delete
Click to expand...
Click to collapse
Thanks - this helped me a lot
ColonelZap said:
I am no expert but can't you just deactive it in the enginner mode?
Click to expand...
Click to collapse
I do that but folder mtklog still any in sdcard ?
Yes, its perfectly safe to remove the files, but you have to also turn it OFF.
You do not want top have any logs running on your device!
They will quickly fill up your SD/eMMC card with junk, and if not fill it up, it will wear it out, in case the logfiles are recycled.
PS. If anyone has any info on how to read these log files let me know.
Just open them in notepad
Copy the .log files in your computer and open them using the notepad
Mtklog
hey-ya!!! I like to ask about my Celkon A62 regarding with memory. So actual problem is that when i restart my phone at that time one folder is automatically generate which is mtklog and start increase the size. After some time its totally full and pop-up the msg "Modem log is on the way"..... so what is it...so how to remove this error....????
plzzzz give me a proper path....its irritating i want properly remove that folder......??????
Hello,
I was able to deactivate the MTK logs using "Mobile Uncle".
-> Menu item "Engineer Mode"
-> Menu item "Engineer Mode (MTK)"
-> Scroll to the right to the tab "Log and Debugging"
-> Menu item "MTKLogger"
In the setting of MTKLogger, I did the following:
- Disable all the logs
- Change the "Log storage location" to "SD Card"
Then, I moved the existing log files from the internal memory to my SD Card. You could delete them instead. The files are here by default:
/sdcard/mtklog
Hope that helps.
Great tip Robbo1.
"Mobile Uncle" was not compatible with my device (a Huawei phone), but this alternative from the Play store did the job too : "Engineer Mode MTK Shortcut"
From the main screen opened by this app, scroll across until you reach the "Log and Debugging" page. Click on "MTKLogger", then click on the 'STOP' icon (small square) at the bottom of the screen - that will stop all the logging.
THEN, click on the SETTINGS icon at top right (faders icon) and then on the "log storage location" and change to SD card if that's what you want.
I then, using the phones inbuilt file explorer deleted all the folders and files under the original MTLOG directory releasing several gigs of internal phone memory.
I think Mobileuncle MTK Tools might be the culprit
PS.
Only now I can read tip #14 referring to Mobileuncle. Oh well ....
Hi Everyone,
I recently got Asus ZenPad 10 and was having space exhaustion issues due to mtklogs.
This is how I fixed it:
Click 7 times on build number found in software update option in settings to enable developer options.
Go to Developers options under settings menu and change 'Logger Buffer sizes' to off.
Voila! The issue is fixed. Hope it helps!
:Hello sir .someone record my call log..this file saved In phone memory this file save mtklog name ..how to solve this problem ..sir plzz give me solution ..this file saved in phone memory audio dump file n file not supported in my phone ..after every call this file save .even if I deleted..:
Ig23 said:
Go to Developers options under settings menu and change 'Logger Buffer sizes' to off.
Voila! The issue is fixed. Hope it helps!
Click to expand...
Click to collapse
This didn't fix it on my Z300M. Are you sure buffer size OFF doesn't mean "unlimited"?