Hi I updated my mobile during update the power goes out from home is no longer my mobile work anymore and this message appears: (what should I do?
http://i.imgur.com/OwgI6.jpg
ahmedsaber20005 said:
Hi I updated my mobile during update the power goes out from home is no longer my mobile work anymore and this message appears: (what should I do?
http://i.imgur.com/OwgI6.jpg
Click to expand...
Click to collapse
Install Kies and across the top, find the tools bar and it will bring a dropdown menu, just select emergency firmware recovery or something like that. Alternatively you can boot into download mode and flash the firmware via odin. If you don't know what that is, stick with the kies method
UltimateAnas said:
Install Kies and across the top, find the tools bar and it will bring a dropdown menu, just select emergency firmware recovery or something like that. Alternatively you can boot into download mode and flash the firmware via odin. If you don't know what that is, stick with the kies method
Click to expand...
Click to collapse
Thanks for your help I am going to try this:laugh:
I can't enter download mode
Kiss say i9100g not supported . Odin can't see my device. I can't enter download mode or recover mode . I have USB jig but nothing is do if I put it in my phone . what I can do ?
ahmedsaber20005 said:
Kiss say i9100g not supported . Odin can't see my device. I can't enter download mode or recover mode . I have USB jig but nothing is do if I put it in my phone . what I can do ?
Click to expand...
Click to collapse
Congratulations, it's a brick!
Take the phone to a service center, let them try to JTAG it. It it won't work, they'd have to replace the main board.
Sent from my digital submersible hovercraft.
f-r said:
Congratulations, it's a brick!
Take the phone to a service center, let them try to JTAG it. It it won't work, they'd have to replace the main board.
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
any way i can do without service center ??
If I had a backup copy of the Software Galaxy S 2 from another mobile phone and was found as a copy Recovery in Samsung Kies program you can use in Dead device and works well?
ahmedsaber20005 said:
Kiss say i9100g not supported . Odin can't see my device. I can't enter download mode or recover mode . I have USB jig but nothing is do if I put it in my phone . what I can do ?
Click to expand...
Click to collapse
If you are unable to get into recovery or d/l mode, it's a brick for sure.
Only JTAG or main board replacement will fix it
Sent from my digital submersible hovercraft.
ahmedsaber20005 said:
if i had a backup copy of the software galaxy s 2 from another mobile phone and was found as a copy recovery in samsung kies program you can use in dead device and works well?
Click to expand...
Click to collapse
can u help me..upload this backup for me..im realy need that..please...
Mr_marumalu said:
can u help me..upload this backup for me..im realy need that..please...
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. You dont need the backup. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/3/?download=13292)
The JB Bootloader. (I downloaded the stock by Ryuinferno)
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
tried but i died
=======================================================================
=======================================================================
=======================================================================
=======================================================================
tried repartition says failed have same issue dang!
any tool that forces a flash or repartition?
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. You dont need the backup.
Click to expand...
Click to collapse
Thanks, mate! You're a god. Damn, I nearly started to cry when I realized that my phone was hardbricked.
But now it works again
THANKS!
Related
Hi I am not sure if its really bricked but I can't turn it on.
It there a way to check if its bricked?
If its bricked is there a way to fix it?
Thanks,
Thomie
Some more details would be welcome:
What exactly did you do and which steps did you try already to get it back up and running?
Freakgs said:
Some more details would be welcome:
What exactly did you do and which steps did you try already to get it back up and running?
Click to expand...
Click to collapse
Its not mine. But the owner said that he had flash the phone. Then at the middle of flashing a brownout occurred. then he can't turn on the phone anymore.
tjsas1 said:
Its not mine. But the owner said that he had flash the phone. Then at the middle of flashing a brownout occurred. then he can't turn on the phone anymore.
Click to expand...
Click to collapse
Your best bet would be to get him into this forum.
We need to know what exactly he tried to flash (which firmware), if he tried to flash a pit file, if he ticked anything in ODIN, etc...
Also we need to know if he tried to get into downloader mode.
USB JIG
Just BUY a USB JIG You will be able to turn it on in a download mode and refalsh it via Odin
Netskyliner said:
Just BUY a USB JIG You will be able to turn it on in a download mode and refalsh it via Odin
Click to expand...
Click to collapse
A jig won't work if the bootloader is messed up..
@OP: if you can enter download mode flash a new firmware.. But if you try to turn it on and it won't (just a black screen with no activity etc on it), better get it to a service center..
Sent from my GT-I9100 using xda premium
My own semi-bricked i9101 turns on but i can't seem to find the right firmware to use to revive it. All the i9100 firmware I tried simply did not work. I'm still waiting for someone to post the right i9101 firmware. Anyone? Please.... Thanks
Remove Battery, just hold down the VOLUME DOWN button, and the HOME button. Then press the Power button.
It will go to download mode, use ODIN, flash.
As for ROM, you can use FUS downloader
http://fus.nanzen.se/
I don't see a I9101 in the list though...
hi
I have same probleme but me when I try to install a firmware the ODI show me that the update is failed and when I want rebout it show in screen S2 in white color a PHONE + PC and yellow mark ( interrogation)
what can i do ?
My S2 is GT-I9100G
DZKI1
I usually work with iPhones so Android phones are a new field for me...
I have a friend who rooted his Samsung Galaxy Ace and then installed Android 2.3.4 but he decided to install something as he says that "doubles the ram memory of the device" well as soon as he installed this the phone immediatelly got bricked.
I have it here in my hands and I tried entering RECOVERY, DOWNLOAD mode and it was impossible.
So I tried pressing all the button (Vol+,Vol-, Home and Power) and the device was USB recognized by my PC,installed its own drivers but nothing showed up on the screen. Then I pressed Home and Power and USB sound ran again and from there on the phone does not react to any combination of buttons, taking out the battery or anything and the PC does not see it anymore.
I tried to be as specific as possible cause I really want to help this guy... So If anyone knows what are the possible solutions besides "take it to samsung care center" I'd really appreciate it!
Thansk!
Install KIES from Samsung so you have the drivers for the phone.
Install ODIN and run on your pc so you can flash a stock ROM (you don't need to have KIES running at the same time)
Take the battery out of the phone and connect it to the pc with ODIN running via USB.
If ODIN detects the phone put the battery back in and now you can flash with a stock rom and your phone will now work.
There are instructions on this forum where to find ODIN and how to load a ROM into it ready to flash.
have u tried the USB Jig?
http://tiny.cc/JIGACE
davebyone said:
have u tried the USB Jig?
http://tiny.cc/JIGACE
Click to expand...
Click to collapse
I'd save that for plan B, If it's showing up on a PC it's not bricked.
Bricked = no power, no response, no detect by pc no nothing.
cooltt said:
Install KIES from Samsung so you have the drivers for the phone.
Install ODIN and run on your pc so you can flash a stock ROM (you don't need to have KIES running at the same time)
Take the battery out of the phone and connect it to the pc with ODIN running via USB.
If ODIN detects the phone put the battery back in and now you can flash with a stock rom and your phone will now work.
There are instructions on this forum where to find ODIN and how to load a ROM into it ready to flash.
Click to expand...
Click to collapse
But Can I download any ODIN? Because I've seen through the forum that there are several ODINs for different Samsung Models... besides there are several ODIN versions! So which one do I need to download? Please a little help here cause in the Android field I'm still a noob!
Also as I told you, the first time the PC recognized the phone when I pressed ALL the buttons... but afterwards it does not recognize it anymore... does it have to do anything with that KIES you are just telling me about? Also which KIES should I download?
Thansk!
To me it doesnt wounds like its "Totally Bricked", take the battery out and leave if there for awhile, come back later on and see if you can enter download mode.
If you want you drivers to be installed correctly, download the KIES (2.1 i guess?) and get ODIN to reflash it.
we have a how to unbrick thread ....try d steps http://forum.xda-developers.com/showthread.php?t=1071970
QNBT said:
To me it doesnt wounds like its "Totally Bricked", take the battery out and leave if there for awhile, come back later on and see if you can enter download mode.
If you want you drivers to be installed correctly, download the KIES (2.1 i guess?) and get ODIN to reflash it.
Click to expand...
Click to collapse
rylegolas said:
we have a how to unbrick thread ....try d steps http://forum.xda-developers.com/showthread.php?t=1071970
Click to expand...
Click to collapse
Ok... this is as far as I have come.... The guide for unbricking seems good, there is only one problem. I've already Loaded ODIN with the firmware files and boot, and all those files. But I can NOT, I repeat I can NOT enter DOWNLOAD MODE (Vol-,Home, Power Buttons). I can only enter EMERGENCY DOWNLOAD MODE (Vol+,Vol-, Home and Power Buttons) and the good news is that ODIN is ABLE to recognize it, BUT as soon as I hit star it stays stuck at "<1> setup connection..." Well before you start saying to search forum for solutions, well I did, and I found this thread: http://forum.xda-developers.com/showthread.php?t=1188378
The guy had this same problem and he realized his problem was that he was entering EMERGENCY DOWNLOAD MODE rather than DOWNLOAD MODE. BUT I can NOT enter DOWNLOAD MODE the phone just doesn't enter this mode, only the EMERGENCY DOWNLOAD MODE so what can I do to make ODIN flash my phone!!????? Please help!!
pliundemix said:
Ok... this is as far as I have come.... The guide for unbricking seems good, there is only one problem. I've already Loaded ODIN with the firmware files and boot, and all those files. But I can NOT, I repeat I can NOT enter DOWNLOAD MODE (Vol-,Home, Power Buttons). I can only enter EMERGENCY DOWNLOAD MODE (Vol+,Vol-, Home and Power Buttons) and the good news is that ODIN is ABLE to recognize it, BUT as soon as I hit star it stays stuck at "<1> setup connection..." Well before you start saying to search forum for solutions, well I did, and I found this thread: http://forum.xda-developers.com/showthread.php?t=1188378
The guy had this same problem and he realized his problem was that he was entering EMERGENCY DOWNLOAD MODE rather than DOWNLOAD MODE. BUT I can NOT enter DOWNLOAD MODE the phone just doesn't enter this mode, only the EMERGENCY DOWNLOAD MODE so what can I do to make ODIN flash my phone!!????? Please help!!
Click to expand...
Click to collapse
USB Jig , and stop posting the same question twice
Sent from my GT-S5830 using XDA App
Ok So I finally did it. Bought the USB Jig! From here:
http://www.ebay.com/itm/Samsung-I910...90122901388427
And Guess What! IT DID NOT WORK!!!
This was my last resort and now I don't know what to do! But pay attention the funny thing, AS I mentioned earlier in ALL my posts! Is that the phone is recognized by ODIN but only in EMERGENCY DOWNLOAD MODE (It even says "COM PORT 18") But in this mode ODIN doesn't flash it, I needed DOWNLOAD MODE which was the reason why I bought the USB JIG, but it is not working! Is there a some kind of workaround to get the JIG working? PLEASE I REALLY REALLY need help!!!
Thanks!
pliundemix said:
Ok So I finally did it. Bought the USB Jig! From here:
http://www.ebay.com/itm/Samsung-I910...90122901388427
And Guess What! IT DID NOT WORK!!!
This was my last resort and now I don't know what to do! But pay attention the funny thing, AS I mentioned earlier in ALL my posts! Is that the phone is recognized by ODIN but only in EMERGENCY DOWNLOAD MODE (It even says "COM PORT 18") But in this mode ODIN doesn't flash it, I needed DOWNLOAD MODE which was the reason why I bought the USB JIG, but it is not working! Is there a some kind of workaround to get the JIG working? PLEASE I REALLY REALLY need help!!!
Thanks!
Click to expand...
Click to collapse
only thing you need is WARRANTY to go to service center....if you bricked by ROM Manager
and i can see you copy pasting problems from your thread to other threads ... why??
if someone can help you,they will.. don't spam with same posts
NO ONE REPORTED THAT USB JIG WORKS SUCCESSFULLY ON ACE as far as i see
evening
about to rma my sgs2 but stuck in a bootloop trying to flash via mobile odin
any help?
Use a usb jig to get into download mode and then flash via odin.
Cheers
Ades
cheers bought a jig today, its in odin mode saying downloading, do i now put my usb
sutty86 said:
cheers bought a jig today, its in odin mode saying downloading, do i now put my usb
Click to expand...
Click to collapse
Stock rom post then reset counter if need be .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
cheers just need to find my usb lead now
adrian5800 said:
Use a usb jig to get into download mode and then flash via odin.
Cheers
Ades
Click to expand...
Click to collapse
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
gr4ndm4st3r_bl4ck said:
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
Click to expand...
Click to collapse
he'll need a custom kernel for that, jig is much safer
gr4ndm4st3r_bl4ck said:
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
Click to expand...
Click to collapse
Yeah that'd work. He's in a bootloop...
guys still having dramas managed to get hold of a windows pc, got odin loaded
downloading 2 stock orange firmwares from intratechs thread and also the old litning
still stuck in bootloop!!!
please no phone now for 4 days!
sutty86 said:
guys still having dramas managed to get hold of a windows pc, got odin loaded
downloading 2 stock orange firmwares from intratechs thread and also the old litning
still stuck in bootloop!!!
please no phone now for 4 days!
Click to expand...
Click to collapse
Look , i had the bootloop once. I tried to power down my device, but it wouldn't work. Took out the battery and it powered on itself - bootloop. Try holding Volume Up + Home + Power buttons to get into recovery mode and then clear data/cache. I remember holding the buttons for 10 seconds before it actually rebooted to recovery
But if you read the heading of this thread gr4ndm4st3r_bl4ck, it says the home button is broke....
ultramag69 said:
But if you read the heading of this thread gr4ndm4st3r_bl4ck, it says the home button is broke....
Click to expand...
Click to collapse
I'm not sure his button is really broke , cuz he didn't mention it anywhere in his post , just in the heading... Which makes no sense, who does any kind of flashing if their hardware button is broke... If it really is , then it's his fault for not taking it to repair first...
Hey,
I have a Samsung galaxy s3 GT-i9300 that wont boot up (it only shows the samsung logo).
Ive rebooted, removed the battery but no success. The only thing that works is download mode. It is still stock (not rooted).
I know theres some similar threads already however theyre rooted with custom roms. Any suggestions? What can I do?
Nath
ronin201085 said:
Hey,
I have a Samsung galaxy s3 GT-i9300 that wont boot up (it only shows the samsung logo).
Ive rebooted, removed the battery but no success. The only thing that works is download mode. It is still stock (not rooted).
I know theres some similar threads already however theyre rooted with custom roms. Any suggestions? What can I do?
Nath
Click to expand...
Click to collapse
You could try reflashing your firmware via Odin, you can download it from Sammobile quite easily
NewAussiefromCanada said:
You could try reflashing your firmware via Odin, you can download it from Sammobile quite easily
Click to expand...
Click to collapse
The only things stopping me is that the handset is still completely stock and under warranty. I dont want to try it and risk losing that warranty...
Try go into recovery and factory reset
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Try go into recovery and factory reset
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How can I get in to recovery? Power+VolDown+Home only put me in download mode with no other options.
Hi recovery is different. Power+home+vol up
Sent from my GT-I9300 using xda premium
madcable said:
Hi recovery is different. Power+home+vol up
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks, tried it, failed.
I turned teh phone off, held power+home+vol up until I saw the logo and then it didnt go any further.
ronin201085 said:
The only things stopping me is that the handset is still completely stock and under warranty. I dont want to try it and risk losing that warranty...
Click to expand...
Click to collapse
If you flash a official release from sammobile it should not increase your binary count, thus leaving your warranty intact. It is when you root or flash a custom Rom your binary will increase.
Worst case you need to use triangleaway if counter increases
Sent from my Jelly Omega SIII using XDA App
If anyone's interested, I had to return the phone under warranty where they replaced the main PBA.
The combination to get to recovery is this (for future reference)
Vol-up + home + power button. Once galaxy s 3 logo pops up quickly let go of the power button and hold in again then let all three go once in recovery.
Sent from my GT-I9300 using xda premium
please help meeeee
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
jehanzaib1 said:
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
Click to expand...
Click to collapse
I had a problem once where my phone wouldn't get past the Samsung boot logo all I did was remove the external SD card tried again and it worked! Try it?
Sent from my GT-I9300 using xda premium
jehanzaib1 said:
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
Click to expand...
Click to collapse
It's forbidden here to spoon feed people but I think I'll help you since I've experienced that myself.
Check your inbox for my PM.
Help wanted also.
EtienneBordeaux said:
It's forbidden here to spoon feed people but I think I'll help you since I've experienced that myself.
Check your inbox for my PM.
Click to expand...
Click to collapse
PM me also?
You guy´s soft bricked your phones thats why u dont get any where re-flashing, but heres something worth trying without risking anything!!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST GET YOUR SAMMY STOCK ROM FIRST FROM THEIR SITE
Use this Odin version >android.gs/download-odin-1-85/.
Above the country code and you can know the three-letter code which applies to your country. Now look for the date of release and select an appropriate update release for your phone.
Step-4 Rebooting
Reboot by holding Home, Volume Down and Power buttons. Remember you need to hold the Volume Down button and not the Volume Up button as in the first step. You will get into the download mode. So, you phone is now ready to get the firmware via USB.
The phone will flash a warning about the dangers involved. You should not worry as you are putting the firmware back on the phone.
On the computer, now unzip the Samsung firmware folder you downloaded from the official website. Now extract the .md5 file.
Now open Odin, select.md5 file in the 'PDA' section of Odin.
Make sure that Auto Reboot and F. Reset Time is ticked.
Connect your Galaxy S3 to your computer via the USB lead. Odin will automatically detect the phone and a pop-up message will show. Now start the process of transferring the file.
Step-5
Wait for the file to download. Odin will show 'PASS!' in the box once the transfer is successful. And the phone will then, reboot.
If it hangs on the Samsung logo, don't worry reboot into the recovery mode by holding down Home, Volume Up and Power buttons. Wipe the data/factory reset and reboot.
This will in all chances bring your phone to a functioning mode. Sign in and start working.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The extent of you phone being bricked may vary, but the symptoms are often the same -- a reboot loop, switching itself off after the Samsung logo or never getting into the operating system. As long as you can get into the recovery mode, there is hope to recover the Samsung Galaxy S3,
no success
Hi guys,
your solutions are great but in my case it didnt help at all.
My phone still stucks at logo. Only download mode is possible, but odin wanted a pit file always when i tried to download the sammy firmware rom. After all i even downloaded the pit file GT-I9300_mx_20120329.pit. But even with the pitfile and Re-Partitioning it didnt function at all.
My SGS3 T-Mobile can not start at all.
PLEASE HELP ME, i am helpless.
with best regards
ghostworm
spoonymoon said:
You guy´s soft bricked your phones thats why u dont get any where re-flashing, but heres something worth trying without risking anything!!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST GET YOUR SAMMY STOCK ROM FIRST FROM THEIR SITE
Use this Odin version >android.gs/download-odin-1-85/.
Above the country code and you can know the three-letter code which applies to your country. Now look for the date of release and select an appropriate update release for your phone.
Step-4 Rebooting
Reboot by holding Home, Volume Down and Power buttons. Remember you need to hold the Volume Down button and not the Volume Up button as in the first step. You will get into the download mode. So, you phone is now ready to get the firmware via USB.
The phone will flash a warning about the dangers involved. You should not worry as you are putting the firmware back on the phone.
On the computer, now unzip the Samsung firmware folder you downloaded from the official website. Now extract the .md5 file.
Now open Odin, select.md5 file in the 'PDA' section of Odin.
Make sure that Auto Reboot and F. Reset Time is ticked.
Connect your Galaxy S3 to your computer via the USB lead. Odin will automatically detect the phone and a pop-up message will show. Now start the process of transferring the file.
Step-5
Wait for the file to download. Odin will show 'PASS!' in the box once the transfer is successful. And the phone will then, reboot.
If it hangs on the Samsung logo, don't worry reboot into the recovery mode by holding down Home, Volume Up and Power buttons. Wipe the data/factory reset and reboot.
This will in all chances bring your phone to a functioning mode. Sign in and start working.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The extent of you phone being bricked may vary, but the symptoms are often the same -- a reboot loop, switching itself off after the Samsung logo or never getting into the operating system. As long as you can get into the recovery mode, there is hope to recover the Samsung Galaxy S3,
Click to expand...
Click to collapse
ghostworm said:
Hi guys,
your solutions are great but in my case it didnt help at all.
My phone still stucks at logo. Only download mode is possible, but odin wanted a pit file always when i tried to download the sammy firmware rom. After all i even downloaded the pit file GT-I9300_mx_20120329.pit. But even with the pitfile and Re-Partitioning it didnt function at all.
My SGS3 T-Mobile can not start at all.
PLEASE HELP ME, i am helpless.
with best regards
ghostworm
Click to expand...
Click to collapse
___________________________________________________________________________
If you using Jelly bean then Chainfire 3D not compatible you will need to wipe and reflash
bunglebp said:
___________________________________________________________________________
If you using Jelly bean then Chainfire 3D not compatible you will need to wipe and reflash
Click to expand...
Click to collapse
i am not able to get into the wipe mode of the phone with 3 finger button mode, only download mode is available.
is there a special procedure how to wipe and reflash with odin or any software?
If there is a tutorial link it would be great to send it to me.
Many thanks in advance.
ghostworm
ghostworm said:
i am not able to get into the wipe mode of the phone with 3 finger button mode, only download mode is available.
is there a special procedure how to wipe and reflash with odin or any software?
If there is a tutorial link it would be great to send it to me.
Many thanks in advance.
ghostworm
Click to expand...
Click to collapse
_________________________________________________________________
This is worth a try - ROM Flash using ODIN and Download Mode: http://forum.xda-developers.com/showthread.php?t=1835931
bunglebp said:
_________________________________________________________________
This is worth a try - ROM Flash using ODIN and Download Mode: http://forum.xda-developers.com/showthread.php?t=1835931
Click to expand...
Click to collapse
i will try it out. First i have to download 859MB !!!
I will tell you if it was successfull.
Thank you very much
Good day gentlemen,
It seems that my S3 would not start/boot up as it only shows the Samsung Galaxy SIII logo and keeps restarting itself. I rooted it before and it worked but the issue was that when I tried to flash a ROM it apparently failed and then the above happened. Any helps would be highly appreciated. Also I'd like to note that I am able to access Download Mode.
Flash a stock ROM
Sent from my GT-I9300 using xda app-developers app
You need to enter recovery mode and wipe all data and caches, then reboot and see what happens...
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
MsElise said:
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
Click to expand...
Click to collapse
Thanks, wipe and reset worked for me.
RichardBronosky said:
Thanks, wipe and reset worked for me.
Click to expand...
Click to collapse
press thanks button is better
MsElise said:
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
Click to expand...
Click to collapse
i tried to do the same as per you instruction but still my phone showing "samsung galaxy s3"(my phone doesn't go into recovery mode)
and if i go into download mode and then try to recover emergancy recovery into samsung kies what i got is i have attached with this post.
please help me sir
miluvyas said:
i tried to do the same as per you instruction but still my phone showing "samsung galaxy s3"(my phone doesn't go into recovery mode)
and if i go into download mode and then try to recover emergancy recovery into samsung kies what i got is i have attached with this post.
please help me sir
Click to expand...
Click to collapse
What is your problem ??? same as thread title ???
jje
JJEgan said:
What is your problem ??? same as thread title ???
jje
Click to expand...
Click to collapse
my problem is there is problem with my rom and hence i am getting the same problem mentioned earlier in this thread. i used everything including samsung galaxy s 3 root toolbox kit 7.0
but then also my pc is not showing me phone status.
my phone is just having only downloading mode. no other thing except the "boot screen" available in my phone.
my question is... how do i overcome to this problem? i wanna re-install the stock rom which i already have. and i know how to install the stock rom. ALL I WANNA KNOW IS WHAT TO DO TO GET VISIBLE STATUS IN ODIN SOFTWARE. AS I THINK THERE MUST BE SOME PROBLEM IN DRIVER.(I TRIED SAMSUNG PHONE DRIVERS, SAMSUNG KIES AND SAMSUNG GALAXY S3 ROOT TOOLBOX KIT 7.0)
PLEASE GIVE ME PROPER DRIVER SO THAT I CAN MANAGE
THANKS
miluvyas said:
. ALL I WANNA KNOW IS WHAT TO DO TO GET VISIBLE STATUS IN ODIN SOFTWARE. AS I THINK THERE MUST BE SOME PROBLEM IN DRIVER.(I TRIED SAMSUNG PHONE DRIVERS, SAMSUNG KIES AND SAMSUNG GALAXY S3 ROOT TOOLBOX KIT 7.0)
PLEASE GIVE ME PROPER DRIVER SO THAT I CAN MANAGE
THANKS
Click to expand...
Click to collapse
In that case you need a service centre if reading the FAQS and Guides re Odin and drivers has failed . Probable damaged USB port .
jje
JJEgan said:
In that case you need a service centre if reading the FAQS and Guides re Odin and drivers has failed . Probable damaged USB port .
jje
Click to expand...
Click to collapse
Is there any other way?
cause i have htc one x too. And its drivers are working 100%. Is it possible to get proper driver from you?
miluvyas said:
Is there any other way?
cause i have htc one x too. And its drivers are working 100%. Is it possible to get proper driver from you?
Click to expand...
Click to collapse
No i don't have proper driver you installed proper driver three times already .
jje
JJEgan said:
No i don't have proper driver you installed proper driver three times already .
jje
Click to expand...
Click to collapse
Thanks man.. you know for this reason i format my pc too. But then also it wont work.. now as per you . Service center is last option.
but as per your saying.. my phone's usb driver got damaged. Right? But what it means? I used only the same data cable which i got with my phone.
is it possible that i will get this data cable issue resolved after visiting service center?
And how much possibilities to get my phone back in working condition if i will get it to service station?(asking cause i read that my phone got bricked)
miluvyas said:
my phone is just having only downloading mode. no other thing except the "boot screen" available in my phone.
Click to expand...
Click to collapse
what do you mean by "boot screen" The Samsung logo? That's not download mode
Glebun said:
what do you mean by "boot screen" The Samsung logo? That's not download mode
Click to expand...
Click to collapse
Man i wrote it wrongly... I only get two things 1 is download mode and another if i try to go for recovery my phone only stuck at samsung logo(so called boot screen )
please provide ur valuable solution
1. uninstall kies
2. install the usb drivers
3. use a different usb port/cable/pc
Google search for samsung drivers 1.4.6, I had a similar problem and the latest drivers dont recognise my device but 1.4.6 does. I would link it for you but I am on my phone.
Vengeance
Sent from my GT-I9300 using xda app-developers app
I had this problem after I ROOT Galaxy s3
All you need to do is visit this page and do all that is written in the instructions:
http : //techmell.net/android-tips/how-to-update-galaxy-s3-i9300-xxella-android-4-1-2-jelly-bean-official-firmware/
This page has helped me and now everything is fine i got official android 4.1.2
If i helped you click thanks button
CORRECT THIS HTTP I CANT POST CORRECTLY
cannot enter recovery mode
MsElise said:
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
Click to expand...
Click to collapse
Hi, i tried it, but i cannot enter recovery mode, can only enter download mode, what should i do?
fabiolaec said:
Hi, i tried it, but i cannot enter recovery mode, can only enter download mode, what should i do?
Click to expand...
Click to collapse
Hi read the stickies on how to flash using odin, back to stock rom.