[Q] help ....... my sgs3 freezed - Galaxy S III Q&A, Help & Troubleshooting

i don't what happen with my sgs3 but it freeze at boot logo and stuck there
i try several solution i know and i think will fix the problem
but its seem going nowhere
i try odin to reflash the rom
but it FAIL
i try several time and no luck
instead the phone said that needed recovery
i try boot to recovery mode
no luck at all
can someone help and give me advise
what should i do with my phone
best regard
mik4

flash a correct pit file before sending it to Samsung

mik4 said:
i don't what happen with my sgs3 but it freeze at boot logo and stuck there
i try several solution i know and i think will fix the problem
but its seem going nowhere
i try odin to reflash the rom
but it FAIL
i try several time and no luck
instead the phone said that needed recovery
i try boot to recovery mode
no luck at all
can someone help and give me advise
what should i do with my phone
best regard
mik4
Click to expand...
Click to collapse
A little more detail about the ROM and kernel you're using might help.

help
dibyajyoti said:
A little more detail about the ROM and kernel you're using might help.
Click to expand...
Click to collapse
i was using android revolution hd 16 n perseus alpha 25.3
now i tried
GT-I9300_mx_20120329.pit
then I9300XXELC_I9300OLBEMA1_XSE
once somehow i'm able to repartition and installing rom
but i stack in the midle of process
after that everything i tried it says no pit partition

Try using one of these lowship firmware, they are 3 part+ pit
http://forum.xda-developers.com/showthread.php?t=1796062
Low ship I9300 firmware for flashing with PIT. (three files firmware)

Related

[Q] I9300 is stuck on white samsung screen, Help please!

I have the international edition of the S3 that a was messing around with, and I ended up installing some rom and now I can't even get into recovery. I've searched around and tried multiple methods of fixing it. The only thing I can access is download mode. Can anyone help?
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
speedman2202 said:
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
Click to expand...
Click to collapse
Do you know where I could find instructions on how to flash a PIT?
this is file come from sammobile.com website
providing u the right PIT file with flasher
http://www.mediafire.com/?ddfpfkk2pb8326k
connect ur mobile , open odin program and then press on PIT button and navigate PIT files then (as i think) choose the latest PIT file with name i9300 (ur mobile Model) and latest date and then hit start ..... good luck but i recommend u send it to ur Samsung repair center if warranty cover
good luck
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
Exactly this^^^^....pit file flashing is an absolute last resort, not a first solution
did you tried flashing 4.0.4 stock rom with odin?
same thing happened to me 2 weeks ago, flashing 4.0.4 and after that flashing 4.1.2 fixed it.
try to do not mess with pit especially if you didn't backup your efs folder. it is not needed.
redstreetwalker said:
it is not needed.
Click to expand...
Click to collapse
moreover, it can render your phone irreparable
Ganjasaur said:
now I can't even get into recovery. The only thing I can access is download mode.
Click to expand...
Click to collapse
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
I've already tried to flash a stock firmware, but I still couldn't get it into recovery. I'm not sure if it was the right one though. I have a regular unbranded SIII, is there a specific firmware I should flash?
speedman2202 said:
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Click to expand...
Click to collapse
okay? the first thing to do here is just flash a stock ROM, no need for pit files
Mine was stuck before than samsung logo, on the model number screen. Almost 1 second or less after opening the device.
Then i flashed 4.0.4 and magically it opened without any loop or something. Its useless to flash 4.1.2 or any other jb stock rom, for some reason it seems not fixing the loop issue.
Again, there is no problem related with pit files.
Sent from my GT-I9300 using xda premium
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Ganjasaur said:
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Click to expand...
Click to collapse
Follow the steps to root and flash your custom ROM again as if you just got your phone. The same thing happened to my T999, and it took me 3 tries doing this to finally get back into Recovery.
try to flash in odin stock rom then root use cwm then try to go to recovery..
My cousin's having the same exact issue and we've been unable to find the proper rom. Can anyone please tell me where to get one? I've downloaded some "international" ones but when i try to upload it it keeps telling me failed, i've tried at least 4 or 5 different roms.
ANY help would be greatly appreciated!!
Phone is:
GT-i9300
using it in the US with StraightTalk in the US (been working like a charm for ~6 months, all of a suddent when into this weird limp mode)
Phone was running jellybean 4.1.1 (through kies) and not rooted
Try several times before giving up. Sometimes it works after when the device feels that you've had enough stress and fear.
I mean the problem is common but it's solved in different ways or different repeats.
But it seems that your problem is a software problem that can be solved.
Glebun said:
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
Click to expand...
Click to collapse
Sorry for the misunderstanding, i mean flashing jb was useless for me in that situation. Thanks for the correction
Sent from my GT-I9300 using xda premium

[Q] Handy suddenly in bootloop. No flashing with odin possible. Now yellow triangle.

Hello,
I read a lot of threads but nothing worked and now I just want to now if my handy is dead! I hope you can give me some information. Maybe some solutions.
Here is my actual situation:
On day my handy was turned off. I tried to turn it on but it keeps in a bootloop. Only the first GT-!9100 was seen and it restarts.
I took out the battery and started it again. Then it booted until the message "App 1 of 1 will be optimized". I waited a long time (about 2 hours) and nothing happend. I took out the battery and tried to boot again. Same problem like at the beginning - again bootloop.
Then I tried to get in recovery mode. It worked! I wiped the cache and restartet my handy. But again bootloop. Now I couldn't get into recovery mode. The droid was lying with a red triangle and my handy restartet automatically. So I tried the download mode. It worked! I downloaded from sammobile the actual firmware I9100XWLSD_I9100DBTLS7_DBT. I tried to flash it with odin v3 1.85 over the PDA button. I connected the handy with odin it tells me that he found my handy and I started to flash. It stucks at cache.img. I waited over night. Nothing happend. Still stucking on cache.img. I took my battery out an dwhen I put it back an started may handy I get now the yellow triangle "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So tried another one with three parts and PIT. In this time with re-partition in odin. But same procedure. I stucked at cache.img.
I still have the yellow triangle and I only can get into download mode.
Then I heard from soft/hard brick problem. I also tried the solution with only flashing the PIT. But no success
So I tried a custom kernel Clockwork Mode Recovery (GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar) to get in recovery mode back. I tried to flash but it stuicks again at "NAND write". I waited again. Nothing happend. So I restarted my handy with tooking out the battery and putting it back again. But in download mode I see that my handy has a custom binary! So it worked. But I can't get into recovery mode of Clockwork
I also tried CF-Root. Here the same problem!
What's wrong with my handy? Is it broken? I've heard maybe I have to re-partition my hand over adb but I found nothing.
One thing is that for half a year I had a problem with my internal SD. It could not mount. After a update of the firmware (luckiely there was a new one!) over OTA it worked again. Maybe I have really a problem with my internal memory...
I hope I have give you all neede information to analyze my problem and I hope really you can help me. If not then it would be good to know if my handy is dead.
Thanks in advance
Best regards,
mr.mash
mr.mash said:
Hello,
I read a lot of threads but nothing worked and now I just want to now if my handy is dead! I hope you can give me some information. Maybe some solutions.
Here is my actual situation:
On day my handy was turned off. I tried to turn it on but it keeps in a bootloop. Only the first GT-!9100 was seen and it restarts.
I took out the battery and started it again. Then it booted until the message "App 1 of 1 will be optimized". I waited a long time (about 2 hours) and nothing happend. I took out the battery and tried to boot again. Same problem like at the beginning - again bootloop.
Then I tried to get in recovery mode. It worked! I wiped the cache and restartet my handy. But again bootloop. Now I couldn't get into recovery mode. The droid was lying with a red triangle and my handy restartet automatically. So I tried the download mode. It worked! I downloaded from sammobile the actual firmware I9100XWLSD_I9100DBTLS7_DBT. I tried to flash it with odin v3 1.85 over the PDA button. I connected the handy with odin it tells me that he found my handy and I started to flash. It stucks at cache.img. I waited over night. Nothing happend. Still stucking on cache.img. I took my battery out an dwhen I put it back an started may handy I get now the yellow triangle "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So tried another one with three parts and PIT. In this time with re-partition in odin. But same procedure. I stucked at cache.img.
I still have the yellow triangle and I only can get into download mode.
Then I heard from soft/hard brick problem. I also tried the solution with only flashing the PIT. But no success
So I tried a custom kernel Clockwork Mode Recovery (GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar) to get in recovery mode back. I tried to flash but it stuicks again at "NAND write". I waited again. Nothing happend. So I restarted my handy with tooking out the battery and putting it back again. But in download mode I see that my handy has a custom binary! So it worked. But I can't get into recovery mode of Clockwork
I also tried CF-Root. Here the same problem!
What's wrong with my handy? Is it broken? I've heard maybe I have to re-partition my hand over adb but I found nothing.
One thing is that for half a year I had a problem with my internal SD. It could not mount. After a update of the firmware (luckiely there was a new one!) over OTA it worked again. Maybe I have really a problem with my internal memory...
I hope I have give you all neede information to analyze my problem and I hope really you can help me. If not then it would be good to know if my handy is dead.
Thanks in advance
Best regards,
mr.mash
Click to expand...
Click to collapse
do u have your phone in warranty ?
also as u can get into download mode try flashing kernel stock kernel first then the flash the stock rom (3 way package) .. do not use pit
pit shud b the last option
I can image that the following happened to your phone (not sure, only a guess):
- you were on Android 2.3.x or 4.0.x
- there was on OTA update to 4.0.4 which caused the 'updating Apps' message
- for what reason ever it was not able to update all apps successfully
- you went to recovery and *wiped*!
Being on 4.0.4 this bricked your phone due to the emmc brick bug. After that all flashing / booting / etc. will fail ...
If this is the case, there is not much to do. There is a program and a thread to modify the partition table to make it re-useable, but only in special cases.
Sent from my Nexus 7 using xda app-developers app
Hello,
thanks for your answers.
@neerajganga:
No warranty anymore I tried the stock firmware from sammobile (I9100XWLSD_I9100DBTLS7_DBT) in Odin with PDA. But I get stucked on cache.img. Or is there another stock kernel I can use?
@AndDiSa:
I was on the latest stock firmware 4.1.2.
Do you know where I can find this threat to modify the partition table to make it re-useable?
Thanks
Best regards,
Mike
mr.mash said:
Hello,
thanks for your answers.
@neerajganga:
No warranty anymore I tried the stock firmware from sammobile (I9100XWLSD_I9100DBTLS7_DBT) in Odin with PDA. But I get stucked on cache.img. Or is there another stock kernel I can use?
@AndDiSa:
I was on the latest stock firmware 4.1.2.
Do you know where I can find this threat to modify the partition table to make it re-useable?
Thanks
Best regards,
Mike
Click to expand...
Click to collapse
well 4.1.2 does not have the brick bug
did u try reinstallin the drivers and also use another usb port ?
---------- Post added at 11:55 PM ---------- Previous post was at 11:53 PM ----------
mr.mash said:
Hello,
thanks for your answers.
@neerajganga:
No warranty anymore I tried the stock firmware from sammobile (I9100XWLSD_I9100DBTLS7_DBT) in Odin with PDA. But I get stucked on cache.img. Or is there another stock kernel I can use?
@AndDiSa:
I was on the latest stock firmware 4.1.2.
Do you know where I can find this threat to modify the partition table to make it re-useable?
Thanks
Best regards,
Mike
Click to expand...
Click to collapse
also u mite wanna read this about emmc brick bug
u can find the extended pit for i9100 here
http://forum.xda-developers.com/showthread.php?t=2094564
neerajganga said:
well 4.1.2 does not have the brick bug
did u try reinstallin the drivers and also use another usb port ?
---------- Post added at 11:55 PM ---------- Previous post was at 11:53 PM ----------
also u mite wanna read this about emmc brick bug
u can find the extended pit for i9100 here
http://forum.xda-developers.com/showthread.php?t=2094564
Click to expand...
Click to collapse
Tee thread is http://forum.xda-developers.com/showthread.php?t=1823918, but if you were already on 4.1.2, you should be save. Probably it's something different and I was wrong.
@neerajganga:
I used a different PC with a different version of Windows (WIN7 on the 1st PC and WIN XP on the 2nd one). Same problem. Odin keeps stucking on cache.img :'(
I read the thread of the emmc brick bug but my problem is that for solution one I can't flash Siyeh Kernel 5.0.1 because of stucking with odin.
For the 2nd solution I need to get in recovery mode and this is not possible because of the yellow triangle.
@AndDiSa:
The thread says that it is possible to use the scanner manually in adb. Does it mean I can use it without going into recovery mode? If yes, would it be possible to explain to me how I can do it in few steps?
Thanks.
Best regards,
mr.mash
mr.mash said:
@neerajganga:
I used a different PC with a different version of Windows (WIN7 on the 1st PC and WIN XP on the 2nd one). Same problem. Odin keeps stucking on cache.img :'(
I read the thread of the emmc brick bug but my problem is that for solution one I can't flash Siyeh Kernel 5.0.1 because of stucking with odin.
For the 2nd solution I need to get in recovery mode and this is not possible because of the yellow triangle.
@AndDiSa:
The thread says that it is possible to use the scanner manually in adb. Does it mean I can use it without going into recovery mode? If yes, would it be possible to explain to me how I can do it in few steps?
Thanks.
Best regards,
mr.mash
Click to expand...
Click to collapse
u can still try flashing a kernel
ADB is useable only in recovery mode or on a running system, unfortunately neither of those are working for you currently
Sorry, but currently I don't know what else you could try.
Sent from my Nexus 7 using xda app-developers app
Try to go in recovery mode and format the whole device inside recovery. Try to use odin to flash a recovery if your device doesn't boot in to. If you're successfully then try from there to flash a kernel and a zip from stock rom.
Sent from my GT-I9300 using xda premium
Key word: pit file
Reason for flashing a pit file: unknown
Solution: flash another pit file
Odds: hard brick, mobo change.
Sent from the little guy
@neerajganga:
Which kernel should I try else? I used CF-Root and Siyeh Kernel 5.0.1. Can you give me some more information? Thanks.
@AndDiSa:
Nevermind. Thanks for your help.
@testadeferro
I tried to flash GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9. Odin stucked. After it I tried to get in recovery mode - no chance.
What kind of recovery should i use else?
@gastonw
I tried to flash only the PIT file with re-partition in odin of different threads. Same problem. Odin stucked. And for flashing a PIT for emmc bricks I need to know the brick start and brick end to choose the right one and for this I need to go into recovery mode.
Thanks.
Best regards,
mr.mash
mr.mash said:
@neerajganga:
Which kernel should I try else? I used CF-Root and Siyeh Kernel 5.0.1. Can you give me some more information? Thanks.
@AndDiSa:
Nevermind. Thanks for your help.
@testadeferro
I tried to flash GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9. Odin stucked. After it I tried to get in recovery mode - no chance.
What kind of recovery should i use else?
@gastonw
I tried to flash only the PIT file with re-partition in odin of different threads. Same problem. Odin stucked. And for flashing a PIT for emmc bricks I need to know the brick start and brick end to choose the right one and for this I need to go into recovery mode.
Thanks.
Best regards,
mr.mash
Click to expand...
Click to collapse
were u able to flash siyah kernel successfully ?
Yeah, you need to know what part of your memory is corrupted in order to flash the right pit file. Now tell me something, are you 100% sure your nand was corrupted?
Sent from the little guy
If he gets in download mode isn't time for mobo replacement but for a jtag maybee or riff box.
Sent from my GT-I9300 using xda premium
@mr.mash
try this pit : http://www.mediafire.com/?3nw116ctfd9nqq2
testadeferro said:
If he gets in download mode isn't time for mobo replacement but for a jtag maybee or riff box.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Not just yet.
Sent from the little guy
@mr.mash
also once u done flashing the pit i mentioned above ... flash a stock kernel first .. then flash the entire rom
@neerajganga:
I used CF-Root and Siyeh Kernel 5.0.1. and Odin stucks. The left upper corner says "Kernel" and the green barrel is full but in the message there is no complete or success info. It just freezes. When I turn my handy on I get the yellow triangle and I can't get into recovery mode. When I'm in the download mode it shows me that I have a custom binary. So I think it worked but no boot or recovery mode possible.
No success with the PIT file. I choosed re-partiton and only your PIT file but Odin stucked.
@gastonw:
I don't know it exactly. First there was the bootloop then it wanted to optimize 1 of 1 app. After wipe cache no recovery mode anymore. That's why I tried the custom roms. I just can give you the information what I see in Odin and on my phone.
How can I know that my USB drivers are not working correct. In Odin I get the yellow ID:COM with my COM port shown. I tried now a different PC and there I just installed the USB drivers. No KIES. And still the same problem with my phone.
Maybe I really have to re-partiton my phone but right now I didn't found something to try it out. Maybe you can give me some information about it.
Thanks.
Best regards,
mr.mash
But you did flash a pit file right?
Sent from the little guy

[Q] S2 Bootloop no recovery! HELP!

My S2 GT-I9100 International was stuck in bootloop but now says "Firmware upgrade encountered and issue. Please select recovery mode in kies and try again". I can go to download mode and ODIN recognizes my phone so what do I do now to get out of this mess. I was previously on NEATRom and everything was working perfectly and all of a suddenly my phone started to boot loop. Please help.
radicalgel said:
My S2 GT-I9100 International was stuck in bootloop but now says "Firmware upgrade encountered and issue. Please select recovery mode in kies and try again". I can go to download mode and ODIN recognizes my phone so what do I do now to get out of this mess. I was previously on NEATRom and everything was working perfectly and all of a suddenly my phone started to boot loop. Please help.
Click to expand...
Click to collapse
i had the same prob. Solution is easy. Just download the originial stock rom. You can flash this by using odin. Select pda and your file (should be a .tar file). good luck!
Firmware upgrade on a custom stock ROM ?? You don't do that. Do as above or you could flash philz kernel through Odin and restore you're bk up.
I had the same problem, but I thought,if firmware upgrade encounters an issue , you can't enter download mode
Sent from my GT-I9100 using XDA Premium 4 mobile app
Tried flashing Kernel with ODIN also tried flashing a stock official ROM. No luck. Kernel gets stuck at NAND Write and ROM says FAIL.
Search for Hopper8's 'Odin troubleshooting' thread. Try the stuff in that thread. Keep trying it. Only way you're fixing it is if you get it to successfully take an Odin flash.
I had the same problem, and flashing the Stock official ROM with Odin worked for me, just make sure you're using the correct version of Odin, I think I had to try one or two different versions before the flash worked for me.
Sent from my GT-I9100 using xda app-developers app
Tried everything. Different versions of ODIN, different stock roms, 3 part jb rom, custom kernels, followed Hopper8's thresd to the T and still no luck. Can't get a single successful flash. Everything stops inbetween. The only thing I havent tried is flashing a bootloader. Since I'm out of options and replacing is too expensive for a 3yr old phone im willing to risk anything now. Thing is I was on neatROM jb 4.1.2 was this problem happened so which bootloader file can I try flashing via odin?
Service centre (a bootloader flash isn't going to fix your problem).
MistahBungle said:
Service centre (a bootloader flash isn't going to fix your problem).
Click to expand...
Click to collapse
yup service centre said Rs.10,500/- ($170) to replace the motherboard. Noway I'm spending that much to fix a 3yr old phone so is there anything else I can try before dumping it in the trash.
Nope. You insist you've tried everything. What do you want anyone here to suggest ?
radicalgel said:
yup service centre said Rs.10,500/- ($170) to replace the motherboard. Noway I'm spending that much to fix a 3yr old phone so is there anything else I can try before dumping it in the trash.
Click to expand...
Click to collapse
MistahBungle said:
Nope. You insist you've tried everything. What do you want anyone here to suggest ?
Click to expand...
Click to collapse
MistahBungle is right, no magic tricks here. If you really have followed through the entirety of my guide, and done it again on a different pc, and still no luck, then I'm afraid it's done for unfortunately. The one step I'd encourage you to try over again is flashing the 3 part firmware again. If you're satisfied that you've nothing more to try then throw it out. Or send it to me or MistahBungle.
Sent from a galaxy far, far away
Just try to flash siyahkernel tar and if that don't work try some other cable. If nothing works i suggest you to sell it and buy another mobile.
Sent from my GT-I9100 using xda app-developers app
Try flashing just cwm through odin. Then may be you can fix problems. Just a thought mate.
SO now that my phone has been officially declared dead is there any way to recover some data from it? I have a few recordings and photos that are on the phone and I can get it into download mode so is there any possibility of data recovery?
Unlikely. A company who specialises in recovery of data from dead HDD's might be able to help, but it's very much a longshot & will be very expensive if possible.
radicalgel said:
SO now that my phone has been officially declared dead is there any way to recover some data from it? I have a few recordings and photos that are on the phone and I can get it into download mode so is there any possibility of data recovery?
Click to expand...
Click to collapse
The phone is NOT dead. You van save it by forcing it to download mode by usb jig (1$ on ebay), then flash unsecure kernel (like Siyah/Dori with CWM inside) using Odin. If you're unable to do it by yourself - take the device to a cellphone repair shop.

All Kinds of odin flash fails!!!!

Hello,
I'm having a strange problem since I'd flashed Cyanogenmod 10.2 on my device. I was running smooth for couple of days and then suddenly it restarted and stuck on Samsung bootlogo. Whenever I'd tried to power on it was stuck there. Then I tried odin flash stock latest NG3 rom and the phone asked for pit. After this it's not working anymore except the Download mode. It shows on odin but when I try flashing anything it fails all the time. Please if anybody can help me on this :crying:
I had never have a problem of this kind while flashing other devices hundreds of times but this one.
Pictures below:
Phone recognized by Odin 3.07 (also any version of Odin)
https://lh5.googleusercontent.com/pGJ2i4tHrJ793tZ8_QlExNjqrjp_7FgCFnhkJrRxqjQ=w339-h262-p-no
With only pit (also with ticked Auto Reboot and F. reset time)-
https://lh6.googleusercontent.com/4wvozjEM78d6gCxnjitqfTVeVq2mm-XKjUS0PBC4f-Y=w337-h262-p-no
With stock recovery-
https://lh3.googleusercontent.com/YAEeTv1yj3Mt8DOdVGKMlS3SkkcvKkdiWlvAH2XnUGA=w335-h262-p-no
With pit and stock image-
https://lh5.googleusercontent.com/YZEBDcmMnEyXZnPP7IS_a20LrqefqgsINUpYtG4K728=w338-h262-p-no
With Stock image-
https://lh3.googleusercontent.com/-IUCCLVJfPS5RfHpFW9_b2dI1-1rEanO0QzLnG0UaVg=w338-h262-p-no
Condition of the device now:
Power On-
https://lh4.googleusercontent.com/ieJG-aQEo7bTpCN4YdKTAWnwCcacIN1WNMNn9lkHqMw=w195-h260-p-no
Recovery Mode-
https://lh6.googleusercontent.com/6FCnGV--qLfFB92m-2PNmzd7h0bUdmJxcHfz_Ztc0kw=w195-h260-p-no
Download Mode 1-
https://lh3.googleusercontent.com/pa7FCzyC23KPRTeyNSDyG46KTA0XofHBby4uAMxJX8o=w195-h260-p-no
Download Mode 2-
http://forum.xda-developers.com/album.php?albumid=11597&pictureid=46943
>>please can anybody say whats problem is and can it be solved<<
Attachments: https://plus.google.com/photos/1105...ms/5923872824339082913?authkey=CLLZp-mf_LS7Ww
@mistermish2000, I'm not a pro but I believe that your partition is corrupted.
If you flashed with PIT selected then you can try to use a recovery firmware for your device from XDA. That would be a last resort though.
thanks RazorMC. I tried with stockrecovery file with no luck, but can u suggest any recovery firmware for the I9300 version please. I'm also looking but if u know any that worked before please suggest. thanks again
mistermish2000 said:
thanks RazorMC. I tried with stockrecovery file with no luck, but can u suggest any recovery firmware for the I9300 version please. I'm also looking but if u know any that worked before please suggest. thanks again
Click to expand...
Click to collapse
No this is a sign of complete eMMC failure see this post >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << I have never seen anyone recover from this and I have seen quite a few posts with the same problem. Service repair recommended :crying:
Try reading the 'dead boot repair solution' thread in general forum, a repair shop with a z3x box will be able to tell you if the emmc is totally fried.
mistermish2000 said:
Hello,
I'm having a strange problem since I'd flashed Cyanogenmod 10.2 on my device. I was running smooth for couple of days and then suddenly it restarted and stuck on Samsung bootlogo. Whenever I'd tried to power on it was stuck there. Then I tried odin flash stock latest NG3 rom and the phone asked for pit. After this it's not working anymore except the Download mode. It shows on odin but when I try flashing anything it fails all the time. Please if anybody can help me on this :crying:
Click to expand...
Click to collapse
You Have Nothing To Loss Try To ReROOT Your Device & Flash Stock ROM
Take a look at THIS
Sorry for the late response. Thank u very much guys for ur kind solutions. But I also thought it's about the hardware so nothing to do now it's a trash. But thank u anyway for showing the ways. Best wishes for all :thumbup::thumbup:
Sent from my SM-N9005 using XDA Free mobile app
mistermish2000 said:
Sorry for the late response. Thank u very much guys for ur kind solutions. But I also thought it's about the hardware so nothing to do now it's a trash. But thank u anyway for showing the ways. Best wishes for all :thumbup::thumbup:
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
good luck man:good:

Bricked galaxy s2 GT-I9100

I have a Galaxy S2 with a custom rom, after a year the s2 won't boot. Only I see encryption failed. I have tried to get in the recovery menu but won't work. Now the phone hangs on samsung logo.
Not possible to get in recovery, downloadmode works.
If I try to flash in Odin it fails or hangs. I have tried different stock roms and odin versions and got not succes. I have read about Nand rw corruption. Is it possible and how can I fix it ?
Need help!
delimavi1981 said:
I have a Galaxy S2 with a custom rom, after a year the s2 won't boot. Only I see encryption failed. I have tried to get in the recovery menu but won't work. Now the phone hangs on samsung logo.
Not possible to get in recovery, downloadmode works.
If I try to flash in Odin it fails or hangs. I have tried different stock roms and odin versions and got not succes. I have read about Nand rw corruption. Is it possible and how can I fix it ?
Need help!
Click to expand...
Click to collapse
go here and flash any pit file you want. Then flash stock one and any kernel you want
delimavi1981 said:
I have a Galaxy S2 with a custom rom, after a year the s2 won't boot. Only I see encryption failed. I have tried to get in the recovery menu but won't work. Now the phone hangs on samsung logo.
Not possible to get in recovery, downloadmode works.
If I try to flash in Odin it fails or hangs. I have tried different stock roms and odin versions and got not succes. I have read about Nand rw corruption. Is it possible and how can I fix it ?
Need help!
Click to expand...
Click to collapse
hi delimavi1981,
I'm in the exact same situation. my s2 rebooted right after I lunched the camera, then complained about an encryption failure and asked me if I want to do a factory restore which I refused, hoping that this will go away on turning off the phone and turning it on again. unfortunately, now I can only get to download mode where Odin keeps failing or getting stuck!
should I consider this a hardware failure and go for a new phone or possibly a change of motherboard or there are some softwaric hopes?!!
thx
S
software failure, flash a stock rom from odin will fix that
Visit this thread....
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
It contains everything you need to try to recover your S2.
If it's not in that guide, it's not worth trying.
keithross39 said:
Visit this thread....
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
It contains everything you need to try to recover your S2.
If it's not in that guide, it's not worth trying.
Click to expand...
Click to collapse
Hi @ Keith
I have been running round to find the problem on my Galaxy S2 GT-I9100 model that my bootloader is unknown until now I have been flashing all types of Samsung Roms and other Roms to resolve my problem somehow problem still there!!! I almost gave up until I come across the pit repartition and your tips on how to recover your S2 in spite of always stuck at the boot logo during the booting up!!!
Well, your last advice was year ago ..... just hope you can advise me on how to resolve the unknown bootloader issue because I can't get my root up!!
Thank you very much
NDbluewee said:
Hi @ Keith
I have been running round to find the problem on my Galaxy S2 GT-I9100 model that my bootloader is unknown until now I have been flashing all types of Samsung Roms and other Roms to resolve my problem somehow problem still there!!! I almost gave up until I come across the pit repartition and your tips on how to recover your S2 in spite of always stuck at the boot logo during the booting up!!!
Well, your last advice was year ago ..... just hope you can advise me on how to resolve the unknown bootloader issue because I can't get my root up!!
Thank you very much
Click to expand...
Click to collapse
Hi @NDbluewee....
It's been almost 6 months since I even visited this forum. That link you posted is a redirect to a thread by @Hopper8. He's the go to expert for software issues (I'm more of a hardware person). I don't even have my trusty S2 any more....my kids 'appropriated' it almost a year ago. Sorry I can't be of any help to you fella....
keithross39 said:
Hi @NDbluewee....
It's been almost 6 months since I even visited this forum. That link you posted is a redirect to a thread by @Hopper8. He's the go to expert for software issues (I'm more of a hardware person). I don't even have my trusty S2 any more....my kids 'appropriated' it almost a year ago. Sorry I can't be of any help to you fella....
Click to expand...
Click to collapse
Woah, even longer since I've been on. Maybe at least a year :/ Who knew my S2 guide would still come in handy! Hope you're doing well mate.
Thanks bro

Categories

Resources