"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
So I just flashed my 9300 for the first time with custom rom. Everything went fine with the installation. The device booted and the first error was " Unfortunately, the process com.android.phone hast stopped." and then when I press Next after language select i get "Unfortunately, Samsung Setup Wizard has stopped." What should i do? Should i try to flash other rom or something?
Djurov93 said:
So I just flashed my 9300 for the first time with custom rom. Everything went fine with the installation. The device booted and the first error was " Unfortunately, the process com.android.phone hast stopped." and then when I press Next after language select i get "Unfortunately, Samsung Setup Wizard has stopped." What should i do? Should i try to flash other rom or something?
Click to expand...
Click to collapse
How did you flash? Was it through CWM or Odin?
The first thing to do would be hard reset, clear cache, and Dalvik cache.
I forgot to add that i rooted like this /watch?v=DpFYcqhKfLg and using the files in the description and flashed like the video it the general thread of the rom. step by step.
Okay i found where is the problem after the 4th time. If you don't install the bloatware you will get this error.
Lock.
you also need to do a factory reset before changing ROMs
I have a Galaxy Note 2 i317, and use a Macbook pro 2011. I successfully rooted my note 2, and suceeded in installing Paranoid android 3.10, not Gapps. When i went to run it, it said that the keyboard had stopped. I tried to flash Gapps to fix this, (B1-DHO-GAPPS.zip). After flashing it, the phone booted properly, but before i could reach the unlock screen, the error "Unfortunately, the process com.google.process.gapps as stopped." appeared, and when i clicked ok, it changed to "Unfortunately, Android Keyboard (AOSP) has stopped." and then to "Unfortunately, Setup Wizard has stopped." I have tried multiple times to format and erase all data, clear cache, and clear dalvik, reflash the rom and gapps, or just the rom, and then re-clear the cache, but the error continues to occur. I tried to replace GAPPs on my microsd, but my computer now refuses to read it, and Android File Transfer won't connect to my phone. Really, I am fine with not having a rooted Note 2 at this point, I would just like for it to work. Please help.
Answer?
Ok before doing anything else , just restore your note 2 to stock ROM, here's how to :good:
First download the stock ROM and drivers (if you don't already have the drivers) - Click here
Download odin if you don't have it
Here's a tutorial to flash roms to galaxy note 2 using odin - click here
Hit the thanks button if i helped
Hi,
I really don't understand what just happened with my Galaxy S2. It was on and well, then crashed for no reason and displayed two error messages in a loop: "Falcon Pro has stopped unexpectedly" (that's my Twitter client) and "android.process.media has stopped unexpectedly". I had not even the time to click on "OK" before the other message appeared and so on, so I forced the reboot by pressing the power button.
Now the phone is stuck on the "S2" logo when booting.
I tried wiping the parition cache, it did nothing.
I have Android 4.0.something, Samsung/Bouygues original rom with Siyah kernel.
What can I do (without losing all my data if possible)?
Thank you...
Zuddi said:
Hi,
I really don't understand what just happened with my Galaxy S2. It was on and well, then crashed for no reason and displayed two error messages in a loop: "Falcon Pro has stopped unexpectedly" (that's my Twitter client) and "android.process.media has stopped unexpectedly". I had not even the time to click on "OK" before the other message appeared and so on, so I forced the reboot by pressing the power button.
Now the phone is stuck on the "S2" logo when booting.
I tried wiping the parition cache, it did nothing.
I have Android 4.0.something, Samsung/Bouygues original rom with Siyah kernel.
What can I do (without losing all my data if possible)?
Thank you...
Click to expand...
Click to collapse
Do you still have the original rom zip on your sd card? If you do, you could try a dirty flash of it on top of your current setup. Wipe cache/dalvik cache and then flash the rom zip. Seeing as you're having FC's, you could also fix permissions in recovery, can't hurt.
Edit: Note, that's attempting to not wipe your data. If that doesn't work you'll likely have to factory reset from recovery.
Hopper8 said:
Do you still have the original rom zip on your sd card? If you do, you could try a dirty flash of it on top of your current setup. Wipe cache/dalvik cache and then flash the rom zip. Seeing as you're having FC's, you could also fix permissions in recovery, can't hurt.
Edit: Note, that's attempting to not wipe your data. If that doesn't work you'll likely have to factory reset from recovery.
Click to expand...
Click to collapse
No, I didn't have any rom on my card...
I tried to wipe dalvik, fix permission, wipe cache and reboot but the problem was not fixed.
So I said goodbye to my data, did a factory reset and that worked. Phew!
Thank you
Purchased a used rooted s4 today and installed the latest cyanogenmod 12.1 nightly. That installs and works fine and all but the second I install the GApps package it results in "Unfortunately _insert Google app_ has stopped" just spamming my screen. If I close it another will just pop up and I can't get into settings or anything. I've tried clearing cache/dalvik etc but same thing. Basically I just have to wipe the device and reinstall without gapps to get it to a usable state. I have the NC5 Verizon galaxy s4 with OUDhs CWM Touch Req0very v1.0.3.5 (was installed by previous owner). I've also tried different gapp package such as slim gapps and same thing. Any ideas?
EDIT: Solved. Updated my recovery and it worked fine.