[Q] Help needed: Can't turn the Xperia Mini on and can't bring it into flashmode - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

I'll try to update and clean up here in order to clearly show what's been done already.
Not sure if my Xperia Mini can be brought back to life. Any help is appreciated. I already read through a ton of threads with bricked phones, but none of these cases seems to be similar to mine. However, I doubt that my case is unique in any way, so I hope there are some guys out there who can bring me on the right track.
How it happened:
Phone was running smoothly.
Put it on the charger at night (phone was on).
In the morning, phone was off and I couldn't turn it on again.
The symptoms:
Power on button has no effect at all (not even vibrate, as it used to do before)
While connected to PC, the hardware manager shows the "ZEUS Fash Device"
The Flashtool (version 0.9.10.1) says device disconnected
Phone does't go into flashmode (VOL down + USB connect)
The phone:
Xperia Mini
Bootloader unlocked (testpoint method)
ROM: FXP208-cm-10-20130223-UNOFFICIAL-smultron
OC: used max. 1.5 GHz for a couple of minutes in total, but did not OC for the last weeks
What I already checked:
Battery: I checked the battery, it is OK. I have a second ST15i and the battery is fully charged and working with the other phone.
The charger is also OK. Also checked with the other phone.
While connected to the charger with removed battery, the battery connector pins (see attached picture) give me 3.5 V or something.
Turn on with no SIM card and no SD card: Same result - nothing.
Enter flashmode (VOL down + USB connect): Does not work.
Reinstall Flashtool and PC companion: That didn't change anything.
S1tool - identify: Tried "identify" method on phone: no result.
S1tool - patch: Tried to repeat the bootloader unlocking procedure. This works until the point where the unlocking actually should happen, but then it says something like "S1 header not found". Not sure however, if this is usual behaviour because the bootloader was already unlocked.
Tried to use PC companion: Phone not recognized.
(Re-)installed drivers from flashtool -> drivers: No change.
What else I could do:
Connect to a different PC: Don't think this will help, but I might give it a try.
Try to esteblish an ADB connection: I don't know much about that, but wouldn't that require the phone to be running in the first place?
Buy a new phone
Any suggestions?
Any help how to solve this is still appreciated.

one more thing...
Forgot to mention that I can't bring the phone into flashmode (VOL down + USB connect).
... will be able to try more in a couple of hours.

Re: [Q] Bricked? How to reanimate the Mini?
Take its battery out and leave it for sometime. Then keep it on charge for 8-10 hours and see if any led light shows up. Then try to boot up without sim and sdcard.
Press THANKS if I helped,
Best Regards,
AJ
Dont miss the ICON FARM!

Battery is OK. I tried the battery on another Mini.
I also tried, without success:
Left without battery for a while (5 min).
Tried to turn it on with no Sd card and no SIM card.
Any other suggestions, anybody?
I didn't find any thread with a similar problem, but maybe I just can't use the search properly...

a-dummy said:
Battery is OK. I tried the battery on another Mini.
I also tried, without success:
Left without battery for a while (5 min).
Tried to turn it on with no Sd card and no SIM card.
Any other suggestions, anybody?
I didn't find any thread with a similar problem, but maybe I just can't use the search properly...
Click to expand...
Click to collapse
Take out battery, wait 10 seconds, reinsert battery, press volume down and while holding just connect via usb to pc. Don't press anything else, just volume down and connect. Now you are in flashmode, so try to reflash stock ftf. If you can't enter flashmode, I don't know what to do

Problem is, the phone does not go into flashmode (volume down + usb connect).
However, it is recognized by Windows as "ZEUS Fash Device".
Is there any alternative way to get into flashmode?

Since windows recognizes the phone as "ZEUS Fash Device", I guess there must be some way this can be used. It just freaks me out to see the phone in Windows but it does nothing. It' like a coma or something.

a-dummy said:
Since windows recognizes the phone as "ZEUS Fash Device", I guess there must be some way this can be used. It just freaks me out to see the phone in Windows but it does nothing. It' like a coma or something.
Click to expand...
Click to collapse
check the unbrick guide..
check the mentioned symptoms of bricked devices..
as windows is identifying the device i dont think its totally gone..
possible hardware is damaged due to overnyt charging..
Hope ur device nt bricked and will work smoothly again..

Repair using pc companion
Sent from my ST15i using xda app-developers app

I Really Pray That I am wrong
I suspect that during charge the phone was overvolted as it was first used after overclocking.
The device is identified as Zeus device cause it was unlocked using testpoint
so what u can do is to pray that ur CPU was not overvolted

hi. I have similar problem.
it's just that pc doesn't detect it completely. I can't put it into flashmode and pc companion and SEUS won't detect my phone. I tried everything people suggesting but not a single thing works for me. is there anyway to force flash using pc companion or should I throw it away :|

Have you installed the drivers from flashtool -> drivers folder? All drivers for all modes/devices?

Never mind read your question wrong

Thanks for all the suggestions. I tried each and every one, but didn't achieve anything.
Sometimes, you just have to let go...

a-dummy said:
Thanks for all the suggestions. I tried each and every one, but didn't achieve anything.
Sometimes, you just have to let go...
Click to expand...
Click to collapse
I have the exact same problem... No flashprogram finds it but Windows. And only thing it finds is "Qualcomm HS-USB QDLoader 9008" ....
Whats the problem

try uninstalling and then reinstalling drivers in your pc
i hope this will help

Hmm... no suggestions on how to put the phone into flashmode, other than using Vol down + usb connect?
Maybe there is none...

Related

x10a + bricked + unable to get flashmode or windows to detect

Hi Guys!
My original x10a was sold to a close friend of mine, whom accidently accessed the xRecovery menu, and select to delete the SYSTEM and DATA partition.
Now he is stuck on a endless loop of being on the Sony Ericsson boot logo text screen.
Only way to power off the phone is to physically remove the battery.
Anyways, I am trying to complete a factory reset with the 2.1 firmware, so far, I am out of luck.
I have WIN 7 x64 running, with both 32-bit 64-bit JAVA SE and development
I also have installed Android SDK, wit all the possible packages, including USB Driver Revision 4
I also have Flashtool downloaded from this website, which included the SEMC drivers.
Problem is...I cant get the computer to recognize the phone at all.
I tried even Sony Update Software as well as Companion software, with no luck.
I am physically in flash mode ... solid green LED, but the computer is not detecting the phone at all.
Flashtool is advising to connect my Xperia phone, when clearly my phone has the solid green LED with black screen (hold down back button and connecting the USB)
First I thought it was the cable, which I replaced with a OEM one, still no luck.
I removed the SD card, 16gb from the phone, and connected through my computer for flash memory sticks drive (all in one), and the card was blank.
I am presuming my friend would have deleted SDCARD data as well
So, now I am stuck in a limbo, how do I fix this?
just to give you hope, if you see the se logo that means that your phone isn't bricked.
it's probably some driver that's not installed properly. I'll let someone with real knowledge explain whatto do.
Something like this happened to me. I know it sounds stupid, but have you tried rebooting your computer?? I did that, and it worked again.
Uninstall SEUS,PC Companion and then reboot the PC.
Then download SEUS and install it. Start SEUS , go through the process. It should detect it now.
Can you access xrecovery? If you Can, download a custom ROM, follow the instructions to install.
Don't forget to extract your ROM to sdcard.
Sent from my X10 using XDA App
Hi All!
Thanks for the input, I do appreciate it.
I am at work right now, but will try it this evening and let you know how it proceeds.
Just as an FYI, I did restart my computer once the Java, SE Companion, SEUS, and Google SDK were installed, still had no luck, but I will try again
To access the xRecovery, it is pressing back button couple of times right?
But the SD is blank, should I use a PC to initialize the SDcard with Xrecovery and everything?
Try this steps...
1-Download a custom ROM to your sdcard and extract. (Use your PC)
2-Reboot your x10 and press a back buton many times.
3-Make following in Xrecovery
*Factory reset
*Wipe cache partition
*Wipe dalvik cache
*Wipe Battery stats
*Install custom ZIP
*Reboot
*Let the phone 5 minutes alone please...
Sent from my X10 using XDA App
you gotta uninstall seus and pc companion, and uninstall all the x10 drivers, then reinstall seus and pc companion
Hi why don't you use flashtool to flash a new rom? I had read in somewhere else here about this tool and seems to work flawlessly to recover bricked xperia..
End of Life ....
Hi Guys!
Sorry for the late reply,
Been extremely busy with work.
Anyways, it seems I got myself a malfunctioning motherboard or broken/damaged usb connector.
Thus, I can't do anything, it is going to cost me $150 bucks to repair.
I cant get into flash mode, as soon as I do that (the green led), windows states that USB device has malfunctioned and my Xperia continuous to the boot logo screen and stuck there.
I tried just about everything, unless anyone else knows better way?
Just to prove the USB connector is damaged, the wall-charger is not even working when the USB is connected
This sounds really extreme. Can you charge the phone? Can you connect the phone to the computer and get a solid green light - ie - flash mode?
I've encountered a similar problem, the battery is completely drained, so much so that it can not connect to the wall charger, can not connect to anything at all.. just gives three flashes of red led then stops.
The only solution is to charge the battery for a few minutes in another X10 and then with enough power, get back into the phone for long enough to re-establish charge being sent to the battery.
IF you have charge and are able to get to the white SE logo, you just need to use the SEUS software to force restore of the stock firmware.
karthigan said:
Just as an FYI, I did restart my computer once the Java, SE Companion, SEUS, and Google SDK were installed, still had no luck, but I will try again
Click to expand...
Click to collapse
Just one more question, have you tried changing the USB port? Sometimes the device ID gets messed up and the only way is to switch to another USB port and make sure the phone connects to the computer with the USB cable and that you have a device id.
EDIT: Worth looking into these two threads;
http://forum.xda-developers.com/showthread.php?t=1034997
http://forum.xda-developers.com/showthread.php?t=1032864
Problem is I am not sure what your exact problem is as I would like to help more!
The newest version of Flash Tool has drivers package included, it worked for me without installing (or reinstalling) SEUS or PC Companion. Look for a 'drivers' subfolder inside the extracted files.
Can you charge the phone?
My USB port has completely died and I've not a working phone even, so I'm unable to work on custom kernels or anything - I don't have an X10 any-more until this USB port on the phone gets re-soldered

[Q][HELP] Xperia P won't connect with PC (Charging only)

My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Try unticking "Enable USB Debugging" and then connect your phone to your PC. With PC companion installed your phone should normally be recognised by Windows.
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
Install XP drivers from Flashtool. Also install fastboot drivers from flashtool.
Here's the steps:
1.) Open Flashtool
2.) Open Fastbootmode in FLASHTOOL, (from the thunder icon)
3.) Connect your device in fastboot mode
THIS STEPS SHOULD BE DONE FAST
4.) After connecting your device, select Reboot into fastboot mode (via Fastboot) from the Fastboot Toolbox, (right side)
5.) Congrats, you are now in fastboot, flash any kernel you want with autoroots.
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
i had the same problem... when i try to connect it says no device detect. i was using go launcher but when i used the original xperia launcher and closed the go launcher.. the pc companion detected my phone.. not really sure how that worked.. but it did.. >____< it was hard to follow the technical solution in the internet.. so im glad my problem was simple as that.. just check if you had the original xperia settings.. and try to connect to pc.. hope it works for you too!
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
You should choose "Let me pick a list of device drivers from my computer" and find your phone driver that you installed before.
Sony Xperia P Nt connecting pc charging only
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
thirupathiji said:
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
Click to expand...
Click to collapse
Try another USB cable
ChikeD said:
Try another USB cable
Click to expand...
Click to collapse
I tried also..in the same cable its connects to fine another phones..
it not shows msc mode..mtp mode only.
now i connected my phone into pc.but no usb storage option shows me..
thirupathiji said:
I tried also..in the same cable its connects to fine another phones..
it not shows msc mode..mtp mode only.
now i connected my phone into pc.but no usb storage option shows me..
Click to expand...
Click to collapse
Could be the port then. Definatly seems there is no data connection
ChikeD said:
Could be the port then. Definatly seems there is no data connection
Click to expand...
Click to collapse
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
thirupathiji said:
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
Click to expand...
Click to collapse
The port is where you plug the USB cable into. It's probably damaged.
ChikeD said:
The port is where you plug the USB cable into. It's probably damaged.
Click to expand...
Click to collapse
How to change the port.? s u think correct.
thirupathiji said:
How to change the port.? s u think correct.
Click to expand...
Click to collapse
Unfortunately the port is part of the main board and cannot be replaced
I've seen at least one forum member that reported to fix his port by pulling the contacts with a needle, though I would not recommend it at least untill you have confirmed this is in fact the problem, at service or lab/store.
thirupathiji said:
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
Click to expand...
Click to collapse
My Phone is connected to pc.No driver installation what is the problem?
Hello,
I have an Xperia P and since yesterday I have been having the very same Problem!
I can connect the phone via USB with my computer but the only thing it would do is: CHARGE
no data connection via usb.
I tried everything i know, like rebooting, entering fast boot mode, installing Sony Companion, enabeling / disabeling usb-debugging, deleteing old junk-data to decrease the amount of elemtents on sd-card... but nothing happens. neither windows nor ubuntu-mint will recognize my phone except from charging.
has anyone of you found a fix for the problem?
i run: nemesis kernel v.6.3 and Honami MoonWalker HD V6 (but i think its not a problem of kernel / ROM because i've been using this combination for a while now and it always worked!)
edwardenglish said:
Hello,
I have an Xperia P and since yesterday I have been having the very same Problem!
I can connect the phone via USB with my computer but the only thing it would do is: CHARGE
no data connection via usb.
I tried everything i know, like rebooting, entering fast boot mode, installing Sony Companion, enabeling / disabeling usb-debugging, deleteing old junk-data to decrease the amount of elemtents on sd-card... but nothing happens. neither windows nor ubuntu-mint will recognize my phone except from charging.
has anyone of you found a fix for the problem?
i run: nemesis kernel v.6.3 and Honami MoonWalker HD V6 (but i think its not a problem of kernel / ROM because i've been using this combination for a while now and it always worked!)
Click to expand...
Click to collapse
how do you run nemesis kernel v6.3 and honami moonwalker hdv6..???how it works??pls upload image or video...
thirupathiji said:
how do you run nemesis kernel v6.3 and honami moonwalker hdv6..???how it works??pls upload image or video...
Click to expand...
Click to collapse
What exactly do you mean?
Do you want to know how I installed it on the phone? Then you should look for some tutorials, there are plenty.
Or do you want to know if it is actually working? I can tell you, it is, don't know why you wanna get a video or screenshot, because its actually not really realated to the thread's topic
thirupathiji said:
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
Click to expand...
Click to collapse
same thing happening with my Xperia S :crying::crying:
if u find any solution plz tell me
Any news about this problem? Im facing exactly the same problem.
The phone works, but no USB connection. I cant enter in fastboot, nor flashmode, or whatever.
Tried all trick described in XDA, (rubber band, full charge, full discharge, etc...)
Factory reset doesn't help too.
update:
I have been using the phone without usb Connection ability for a while now and transferred data files via wifi-app on my computer when I needed to.
Eventually the phone died yesterday, because it is not charing anymore ;(
First it started like this:
I had the charger plugged in and it recognized it, showing the flash icon within the battery icon. But nothing actually happened, in fact, the battery kept draining.
So i tried differend chargers and cables but nothing worked. I wasnt able to prevent the phone's battery from completely depleting. Now, the phone won't turn on anymore and when I plug in the charger, the red Status LED will turn on for about 5 minutes, then it turns off again and nothing happens. I can repeat that but i figure, the battery is not getting any energy from the charger
Does anyone know how to fix this, yet?
The phone is slightly over 2 years old...

Cant connect xperia p

Hello,
I isntalled that rom with kernel. http://forum.xda-developers.com/showthread.php?t=2391858. and the problem is now that my pc, cant see my phone, i tried every method i found on the site. i instaled all drivers and reinstaled from flashtool like 10 times, and my pc still doesnt see device. while i try to connenct via fasboot. i have the violet light for like 2 sekonds and after it the device starts to boot normally, same is with flashboot. flash tool does not give any msg of connecting a device. can any tell a way to get it working? i want to flash to stock soft. but i cant cause nothing sees the device with installed drivers.
FOrogot to ad that i flashed the aospa rom, cause i thought i will get usb working atlast. but im stuck now on com.android.phone stopped working, and i cant even download any other rom using phone:
EDIT
Just read in nemesis kernel topic "* Computer/PC Companion and even Flash Tool cannot detect.". so Any ideas how can i flash it. without have any other rom on sd card? I will be rlly happy if someone can help me, i know i made a big mistake but not doin recovery, first time i not did and all went wrong.
do u have SUS? (Sony Update Service)
try connecting with SUS if SUS don't detect your phone then flashtool will not detect your phone also.
Well it doesnt not see to, In my opinion no porgram will see it if device manager cant see it, but now after some slleep i got and idea. Could it be maybe the problem of to old micro usb cable. because my got broken. and i have to use from my sister that has samsung wave.
Good Luck.
LED should be blue not violet for fastboot.
Make sure the phone is shut down first, press volume up + power for 10-15 seconds untill you feel 3 vibrations.
Well whatever coulour it is violet or blue. I press the volume up connect the phone to usb. And i got this coulur for 2-3 second and then it goes to charging mode. it happens every time. Same happens to flashboot. Green for 2-3 sec and the it goes to charging mode.
maebara said:
Well whatever coulour it is violet or blue. I press the volume up connect the phone to usb. And i got this coulur for 2-3 second and then it goes to charging mode. it happens every time. Same happens to flashboot. Green for 2-3 sec and the it goes to charging mode.
Click to expand...
Click to collapse
It's not "whatever" if it's violet it means it's waiting for vol- to enter CWM and not entering fastboot.
Make sure the phone is turned off as I explained.
Phone is turned of, I allways wait for those 3 vibrations before i begin the process. And here to enter the cwm is blue, and for fastboot i have violet. If i had a camera i would record it to prove it.
maebara said:
Phone is turned of, I allways wait for those 3 vibrations before i begin the process. And here to enter the cwm is blue, and for fastboot i have violet. If i had a camera i would record it to prove it.
Click to expand...
Click to collapse
Flashtool and PCC worked before on the same PC?
What do you see in flashtool log when you connect in fastboot and flash mode?
ChikeD said:
Flashtool and PCC worked before on the same PC?
What do you see in flashtool log when you connect in fastboot and flash mode?
Click to expand...
Click to collapse
THey say nothing, As i say in the first post. PC does not see the device, Flastool handles as nothing has been conected. same device manager on wondows. no poop outs that drivers are missing, or anything.. Fastboot has allways waiting for device, doesnt matter how much i try to onnect. It worked before. I tried on other laptop but its same. Thats why later i wrot that maybe this cable is to old for that phone. But it works for other phones.
maebara said:
THey say nothing, As i say in the first post. PC does not see the device, Flastool handles as nothing has been conected. same device manager on wondows. no poop outs that drivers are missing, or anything.. Fastboot has allways waiting for device, doesnt matter how much i try to onnect. It worked before. I tried on other laptop but its same. Thats why later i wrot that maybe this cable is to old for that phone. But it works for other phones.
Click to expand...
Click to collapse
Your USB did not work before?
ChikeD said:
Your USB did not work before?
Click to expand...
Click to collapse
I got my orginal mircro usb from xperia but it went boroken last time, on monday i go buy me new. but i wanted to use my sis micro usb from samsung wave, well mirco usb is micro usb imo, but i can be wrong. before i was able to do things on that cable too. but now idk if its the cable fault. or its phone, cause seems i can only charge my phone throught it. even on pc. it only charges nothing more. I just want to know if there is any way to make phone visible to pc, installing drivers, reseting. wiping data on phone, nothing works
maebara said:
I got my orginal mircro usb from xperia but it went boroken last time, on monday i go buy me new. but i wanted to use my sis micro usb from samsung wave, well mirco usb is micro usb imo, but i can be wrong. before i was able to do things on that cable too. but now idk if its the cable fault. or its phone, cause seems i can only charge my phone throught it. even on pc. it only charges nothing more. I just want to know if there is any way to make phone visible to pc, installing drivers, reseting. wiping data on phone, nothing works
Click to expand...
Click to collapse
It could be the connector on the phone.
I use samsung cable no problem, the Sony that came with XP is still sealed

[Q] Tablet Z bricked?

Hi there,
yesterday I tried to root my new Tablet Z (16GB, LTE, Model: SGP321, Firmware: 10.4.B.0.569) and it doesn't start since then.
I used an ubuntu live CD for all these tasks because fastboot doesn't work on my win 8.1 and my debian wheezy didn't have the libc-dev needed in its repositories (didn't want to mess with packets that weren't yet integrated into my OS).
What I did:
unlock the bootloader according to http://unlockbootloader.sonymobile.com/instructions
I followed the instructions here: http://forum.xda-developers.com/xperia-z/general/how-to-root-10-4-b-0-569-t2590781
a few annotations to this:
the firmware rar didn't include a "Recover.zip", so I used the boot.img directly inside the firmware rar
although sony and this CM tutorial use the "-i" parameter of fastboot, I didn't use it because it wasn't used by the tutorial
after I did the "fastboot reboot" step, the device wasn't listed anymore when typing "fastboot devices", which, I think, is okay since the device should restart then.
I think it didn't really restart, because the LED on the side glew red.
I tried to turn on the tablet but it didn't do anything (the LED kept glowing red).
I tried holding vol up and power for a few seconds (until the LED blinked first once and then three times) but the tablet wouldn't do anything except for the LED glowing red. at somepoint, the LED would turn off (I think that happened when I hold vol up and power for more than 10 sec).
I was able to let it glow red again by pressing vol up and power again and release the vol up button before the power button.
I also tried to use the PC companion on my windows machine to repair the tablet but the tablet wasn't even recognized (either using the fastboot-procedure by holding vol up while connecting the tablet nor normal plugging in...)
any ideas what I could do next?
Same Problem!
Hey wullxz!
I have the same problem. Red LED most of the time, and I cannot make ANY USB connection to the PC. The tablet won't show up in the device manager. So obviously cant use flashtool, nor PC companion. Ive tried all this volume up and down button stuff, but simply cannot get it to show up on the computer.. Tried a different USB cable as well.. Same issue. The USB port is definitely not broken. Its brand new..
Have you found any solution ? Or anyone else? Mine just got back from Sony Repair.. they wont fix it cuz they detected that Ive tampered with the original software.... meaning Warranty Lost!
Great!
hi,
i also sent mine to sony for a repair. i wrote that i did a firmware update and the tablet wouldn't boot afterwards.
i didn't try the bootloader-unlock again afterwards.
Help Needed!
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Oki
wullxz said:
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Click to expand...
Click to collapse
Oki thnx, will try that!
centinel_x said:
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
Click to expand...
Click to collapse
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Rootk1t said:
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Click to expand...
Click to collapse
Hey thanks for your reply... It wont go into flashmode... Theres something fundamentally wrong.. I cant figure out what... I leave it plugged in for 48 hours..but it doesnt really get full.. the most Ill get the orange LED.. like 50%... now its on since about 12 hours.. no LED on at all... strange..
But yea.. no flashmode... Nothing showing up when connecting the USB cable... nothing in device manager..and therefore flashtool sees nothing!
SOLVED
Problem solved! I can't believe it. Two bad(?) USB cables. Bought a new one, charges fine, flashmode fine. Flashed stock ROM.
However the Camera still doesn't work. Maybe the problem of the cable inside which may have come loose!

Need help with bootloop -- A tricky bootloop.. Donation will be given!

Hi there peeps!
My Xperia Z2 has gone into a bootloop, with no recovery, no boot logo, not registering ADB / fastboot drivers anymore.. BUT.. the buttons seems to work, so i may reboot it some different ways. The only indication of life it got, is the red light when booting.
Someone want to tag team with me to find the solution?
Donation will be gived to a working solution
Best regards!
There is no solution for this atm. The best way to fix it is to send it to the service center.
kimocoder said:
Hi there peeps!
My Xperia Z2 has gone into a bootloop, with no recovery, no boot logo, not registering ADB / fastboot drivers anymore.. BUT.. the buttons seems to work, so i may reboot it some different ways. The only indication of life it got, is the red light when booting.
Someone want to tag team with me to find the solution?
Donation will be gived to a working solution
Best regards!
Click to expand...
Click to collapse
I may have a solution. Red light usually means it cannot boot the kernel.
I have a simple fix. Follow this guide and make sure to download the firmware of your exact model and current software version number.
When you get to this step, on the right side don't check anything under 'WIPE', leave them blank. And under 'EXCLUDE', check everything except 'KERNEL'. Leave Kernel blank and the rest under exclude check them.
Proceed and press 'volume down' and connect the usb cable at the same time. Let the flash finish and boot the phone back up. Let me know how it goes.
Thanks! I'm trying your solution now, but i dont think it works... none of the drivers are either so. Give me some hours, i will walkthrough here
I can say, it is NEARLY dead i would think, but there must be a way somehow..
Yeah, this will not work.. It gets stuck on "HOLD THE VOLUME DOWN + PLUG THE CABLE" and both ADB and Fastboot are missing so.. It won't do anything there. Holding the Volume UP + Power reboots (that works for some reason). And the orange reboot button in the charging is working but nothing that will help me i think.
kimocoder said:
Yeah, this will not work.. It gets stuck on "HOLD THE VOLUME DOWN + PLUG THE CABLE" and both ADB and Fastboot are missing so.. It won't do anything there. Holding the Volume UP + Power reboots (that works for some reason). And the orange reboot button in the charging is working but nothing that will help me i think.
Click to expand...
Click to collapse
When the device is connected in flash mode (USB + Vol down), go to device manager and see if the device is there (may be called 'Xperia Z2" or "Unknown Device", right click and go to properties and update drivers to this. Update me how it goes. I had the EXACT same issue and it took me some time to resolve, by solving the drivers issue you can flash the kernel again without losing data.
If that doesn't work, install these drivers: http://forum.xda-developers.com/showthread.php?t=2588979
Hi!
When my went to Bootloop the only thing that woked was using sony's Pc recovery tool.
sony's Pc recovery tool
Hope this helps you out
Try Software repair on the new Xperria Companion
http://support.sonymobile.com/global-en/xperiaz2/tools/xperia-companion/
Both Sony Companion and Sony Emma are not registering the devices, but after fiddling around with VOLUME UP, VOLUME DOWN and lots of trying, at some point the device manager finds a unknown device. "hiredantispammer" may got the solution, but i will try all posted solutions right away! Post update soon
1. On "VOLUME DOWN + PLUG" the Device Manager refreshes, and the Z2 got the "red light" -- but Device Manager does not show any connected devices nor drivers needed.
2. The Sony Companion does not find the device either.
But.. i was reading about some Windows 10 driver problems, so i will try switch to Windows 7 x32 to ensure the drivers are working correctly.
Another thought.. Is it some way to put a "update.zip" on a sdcard for force installation of new kernel or anything?
Yeah, the solution is right. Hopefully Win 7 solves your driver issues. I had to reformat my laptop and install Win10 again because of driver issues when I have the exact same issue as you. Hope you get your phone working again!
Sent from my D6503 using XDA-Developers mobile app
And no, there's no other safe way to reflash the kernel. Even with an unlocked bootloader, you need fastboot drivers.
This worked for me.
Grab your original cable and make sure the phone is charged to st least 80%.
Start the pc companion and the repair program.
Hold the down key and connect to the computer.
In around 20 minutes the phone is repaired
Hope this helps.
It is important to use proper cable and not any old thing laying around. Mine would not connect until i got the original one.
Ah, charge your device fully. Reboot Windows 10 in safe mode and disable driver signature. Install device drivers. Use Sony PC companion or flashtool to fully reflash the right firmware for you device. You are still able to turn it off and on, so it should work if you do it right.
Best to first flash just the kernel and see if it boots, if it doesn't since you have the firmware files, flash everything and don't wipe data.

Categories

Resources