I don't normally post in the development forum but this is where the other OTA update threads were created.
The Sprint version of the 2.95.651.5 OTA can be downloaded here. It includes some firmware updates, patches and replacements for system files, and the Sprint Connection Optimizer app. There's a Sprint thread for the complete OTA update linked courtesy of oryan_dunn.
Here's a firmware only zip file for any Sprint Evo 3D user that is S-OFF and on the 1.09.00.0706 baseband level and would like to update. The stock hboot 1.58, recovery and boot.img have been removed so that installed custom versions of those files do not get replaced.
The baseband version should change from 1.09.00.0706 to 1.09.00.0108 and the PRI from 1.43_003 to 1.55_003.
ramjet73
Nice updated my firmware thanks ramjet
Thanks Ramjet!!! What baseband number does this update to?
edit: to answer my own question... this updates radio to 1.09.00.0108
troyboytn said:
Thanks Ramjet!!! What baseband number does this update to?
Click to expand...
Click to collapse
Believe it or not, 1.09.00.0108.
I know that doesn't sound right since the previous version was 1.09.00.0706, but the last four digits of the baseband version are the month and day (mmdd) of the build so it's effectively a 20130108 update of the 20120706 firmware release.
On another note, it's already been identified that the ButteredToast and Anthrax kernels don't have working WiFi when flashed with the updated stock ROM, but they work fine with the other ROM's they support and the updated firmware. The 2.89.651.2 version of Leedroid Tweaks also does not work with the updated stock ROM which is no surprise since a lot of framework files are replaced by the OTA.
Flashing the firmware updates should be no problem regardless of what kernel/ROM combination is being used, but developers supporting ROM's based on Sense 3.6 stock may have some work to do if they want to incorporate this OTA.
ramjet73
Good info for sure.
Seems to be working fine on Negalight.
That's interesting. I'm wondering if they will release updated kernel source too.
Sent from my PG86100 using Tapatalk 2
lol. Maybe in about 3 months....
troyboytn said:
lol. Maybe in about 3 months....
Click to expand...
Click to collapse
If we're lucky
It sounds like the kernel might be slightly offset (if that makes any sense) kind of like when the 2.89 update came out and an updated mkbootimg was needed unless you first flashed a non aroma kernel first or used the flashimagegui app.. I wonder if someone can
Sent from my PG86100 using Tapatalk 2
Thanks RJ updated firmware without a hitch much appreciated
Sent from my PG86100 using xda premium
Thank you ramjet! So if I read correctly, AOSP users shouldn't have any issues after flashing the new firmware files? Thank you so much.
aoaleman said:
Thank you ramjet! So if I read correctly, AOSP users shouldn't have any issues after flashing the new firmware files? Thank you so much.
Click to expand...
Click to collapse
Correct!
At least none have been reported to date by anyone including some VM users that got a similar OTA update a couple of days ago. It's mainly the radio and PRI so it should be pretty transparent to the ROM and kernel.
ramjet73
Been working fine in slimrom.
Sent from my jb'd EVO 3D.
ramjet73 said:
Correct!
At least none have been reported to date by anyone including some VM users that got a similar OTA update a couple of days ago. It's mainly the radio and PRI so it should be pretty transparent to the ROM and kernel.
ramjet73
Click to expand...
Click to collapse
Thanks for your quick response.
Edit: Oops, forgot to rename!
Edit 2: Worked like a charm. Thank you.
I took the update on stock Ics with stock recovery and locked bootloader with s-off and the update went fine.
ramjet73 said:
I don't normally post in the development forum but this is where the other OTA update threads were created.
The Sprint version of the 2.95.651.5 OTA can be downloaded here. It includes some firmware updates, patches and replacements for system files, and the Sprint Connection Optimizer apps.
Here's a firmware only zip file for any Sprint Evo 3D user that is S-OFF and on the 1.09.00.0706 baseband level and would like to update. The stock hboot 1.58, recovery and boot.img have been removed so that installed custom versions of those files do not get replaced.
ramjet73
Click to expand...
Click to collapse
Thanks. What does your version number read after the update? Mine says 1.09.00.0108. Weird that the version number would decrease. Did this change the PRI as well? I didn't remember to write down what it was before the update. I think it has changed as well.
Sent from my PG86100 using xda app-developers app
ohbuckeyeman said:
Thanks. What does your version number read after the update? Mine says 1.09.00.0108. Weird that the version number would decrease. Did this change the PRI as well? I didn't remember to write down what it was before the update. I think it has changed as well.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Your baseband is correct. ramjet posted earlier that the last for digits is the build date
negamann303 said:
Your baseband is correct. ramjet posted earlier that the last for digits is the build date
Click to expand...
Click to collapse
Sorry for the repetitive question then. Thanks for the info. Loving your release 66, btw!
Sent from my PG86100 using xda app-developers app
ohbuckeyeman said:
Thanks. What does your version number read after the update? Mine says 1.09.00.0108. Weird that the version number would decrease. Did this change the PRI as well? I didn't remember to write down what it was before the update. I think it has changed as well.
Click to expand...
Click to collapse
negamann303 said:
Your baseband is correct. ramjet posted earlier that the last for digits is the build date
Click to expand...
Click to collapse
That's correct.
The baseband version should change from 1.09.00.0706 to 1.09.00.0108 and the PRI from 1.43_003 to 1.55_003.
ramjet73
Related
This latest update is 4.0.3 and has some nice fixes in for wallet (finally) and a few other things. For a more detailed list of changes and links to the OTA file check out joeykrim's thread here.
I've updated the ROM zip to fix the Wiper App force closes and a few other things that I had found. If you were one who got the force close after flashing the smaller fix below is all you should need to correct it. If you are just now downloading the ROM it's built in so the fix is not needed.
As always make sure you do a nandroid first!
ROM Updates:
These must be flashed through the recovery.
Stock Rooted Odexed 1.22.651.3 - Updated 8/27/12- Added support for s-on devices
1.22.651.3 Stock Rooted Odexed (MD5: a65b6f188a9bb0e00a7e3eb2d627ec50)
Click to expand...
Click to collapse
Stock Rooted DeOdexed 1.22.651.3 - Updated 8/27/12- Added support for s-on devices
1.22.651.3 Stock Rooted DeOdexed (MD5: 3a78ad0d684b37627cf3566bc53f2bb4)
Click to expand...
Click to collapse
Kernel:
Stock Kernel - Flashable with S-ON or S-OFF
Stock Kernel (MD5: ed21a70f30c7fb004ed180a71677fcaa)
Click to expand...
Click to collapse
Fixes:
Wiper App & Font Fix - Updated 7/13/12 - Thanks to ProcessorHog for pointing out the font issue and AssassinsLament for correcting the Roboto symlink.
Wiper & Font Fix (MD5: 6e534d7293c2184a25e716e9e1893813)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Firmware Updates:
These must be flashed through fastboot/hboot on a device with S-OFF.
Important: Always make sure the MD5 matches and if you get any errors while updating immediately delete all copies of the zip and re-download it.
Latest Firmware Without Recovery, Boot(kernel) or hBoot - Updated 7/13/12 - This includes the new radio, PRI update and a few others.
1.22.651.3 Firmware (MD5: 2cb07c7870ab5411e731cff69dffe790)
Click to expand...
Click to collapse
Latest Firmware Without Recovery or Boot (Kernel) - Updated 7/12/12 - This includes the new hboot, radio, PRI update and a few others.
1.22.651.3 Firmware (MD5: db39dc3d07e5619f73afe7b0bdd200ee)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xHausx said:
Reserved
Click to expand...
Click to collapse
thanks for the quick work and getting these updated for us - if you have any problems downloading...please let us know
Thanks again
Flash via recovery??
Sent from my EVO using xda app-developers app
I'm still trying to wrap my head around this while "original" crap. Now how is this original. I feel as this should just be in the regular development.
So basically if you are the first to make anything it goes in "original".
But I do appreciate this just trying to understand this whole dis-organization going on
Sent from my EVO using Tapatalk 2
Thanks man. I'll be updating my rom tonight for sure.
Love you man. No homo
Sent from my EVO using xda premium
klept0 said:
thanks for the quick work - now get that deodexed done!
The DL will take a second to start as things are being changed on our site backed - please sit tight and give it a sec..if it errors..just hit refresh!
Click to expand...
Click to collapse
deodex should be up sometime tonight, trying to get rid of that flasher app error first
is the new radio needed to be flashed before flashing this??
xHausx said:
you may get a message upon reboot complaining that "Wiper App" has stopped
Click to expand...
Click to collapse
Had the same issue trying to create a stock 1.13 rom from the ruu. Vipers stock 1.13 just doesn't even include wiper.apk and is missing a couple libs. I think the issue has to do with them and/or their permissions.
Thanks op....cool this dropped on my bday
Sent from my EVO using Tapatalk 2
Thanks
Sent from my EVO using xda premium
one_love_420 said:
I'm still trying to wrap my head around this while "original" crap. Now how is this original. I feel as this should just be in the regular development.
So basically if you are the first to make anything it goes in "original".
But I do appreciate this just trying to understand this whole dis-organization going on
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I'm sorry....was this a zip or combo of a bunch of already posted roms/tweaks?....no it was original...check the sgs2 and ill see radios posted there in their section...regardless this is NOT the thread to discuss this in...
Sent from my EVO using xda premium
As others have asked, what is the proper method of actually installing this? Is this a recovery flash, or something done from the bootloader, or something else?
xHausx said:
This latest update is 4.0.3 and has some nice fixes in for wallet (finally) and a few other things. Do to the way they update now you may get a couple messages upon reboot complaining that "Wiper App" has stopped, if so just hit ok or cancel out of it and you should be good to go. Check back often as I'll be updating this often as I go through it more.
As always make sure you do a nandroid first!
1.22.651.3 Stock Rooted Odex - (MD5: 7eaea8dccf96db1332c0b12e9a70e1aa)
Click to expand...
Click to collapse
And...xHausx delivers! Thanks for all your hard work!
Vincent Law said:
As others have asked, what is the proper method of actually installing this? Is this a recovery flash, or something done from the bootloader, or something else?
Click to expand...
Click to collapse
I'm not an expert but this is a ROM which you should be able to install with a custom recovery. clockwork or TWRP
kbrn said:
I'm not an expert but this is a ROM which you should be able to install with a custom recovery. clockwork or TWRP
Click to expand...
Click to collapse
I relocked rui'd and took the ota and fastbooted twrp then flashed this in twrp and got my root. So yeah its a good way to ota just flash this in twrp...I only have positive things to say about it. Running very good
rockin my EVO 4G LTE
I can't thank you enough. :highfive: My device was root/S-OFF Lazypanda 1.13, and I just installed you zip on top of it and it worked perfectly!
Also seemed to enable 4G where I am at!
Side note: Anyone think I can just "freeze" Wiper to prevent these errors?
What is HTC Wiper?
Sexy... Thanks xHausx! Saving us all some trouble.
Kujila said:
I can't thank you enough. :highfive: My device was root/S-OFF Lazypanda 1.13, and I just installed you zip on top of it and it worked perfectly!
Also seemed to enable 4G where I am at!
Side note: Anyone think I can just "freeze" Wiper to prevent these errors?
What is HTC Wiper?
Click to expand...
Click to collapse
i'd like to know also. for some reason its not included in my current rom, and i didn't remove it...
motcher41 said:
Thanks op....cool this dropped on my bday
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Happy Birthday! You need to have them more often if we can keep getting updates like this
I'm running:
Rooted 1.22.651.3
LazyPanda S-OFF
Hboot: 1.12.2222
Baseband: 1.02.12.0427
PRI: 2.28_003
PRL: 25010
Haven't updated ROM because I figured I'd wait till JB hit and bugs got ironed out. I also never updated firmware because everyone was saying that you you can never go back after you update. So, my questions:
1. Can I update to newest firmware while staying on an older ROM?
2. If so, should I?
3. Is there any reason to stay with an older firmware (assuming there are no compatibility issues)?
1. Yes
2. Yes
3. No, baring any compatability issues I'm not aware of.
I'm s-on hboot 1.12 and obviously wouldn't want to upgrade my hboot. I can do radio, but I guess that's it?
Sent from my EVO using xda app-developers app
In the Android Development forum there is a thread with the firmware. You can flash the one that says "no kernel/hboot/recovery". That way it'll just update everything else. There are a bunch of files that it flashes but I can't say exactly what each is for except for the radio.
Yes I went with stock with goodies and I have no regrets
Sent from my EVO using xda premium
JPHoss said:
Yes I went with stock with goodies and I have no regrets
Sent from my EVO using xda premium
Click to expand...
Click to collapse
That makes me feel better since I just downloaded it and will be installing it shortly!
Hello, my apologies if this problem has arisen in the past. however, after rigorously browsing the forums, I came up short.
When I install/ flash the jellybam rom or cm10.1 rom, the screen stops working except for in bootloader and twrp recovery. I heard you have to downgrade the touch panel, how do i do that?
I have;
-HBOOT 2.09
- build 3.19 and I belive everything else is up to date on the latest software.
I _think_ you need to update the touch panel drivers/firmware also, located here: http://themikmik.com/showthread.php...LE-Jewel-Radio-Collection&p=220556&viewfull=1
tp_SYN3202.img is the latest, but it says it will break touch screen in recovery and on non-stock roms if done incorrectly.
I would ask this question in captain_throwback's latest firmware thread before you install tp_SYN3202.img
I'm only pointing you in the right direction, I have NO experience with updating the touch panel .img - please ask someone who has dealt with this before you do ANYTHING (I just dont want you to break your evo!)
zmag said:
I _think_ you need to update the touch panel drivers/firmware also, located here: http://themikmik.com/showthread.php...LE-Jewel-Radio-Collection&p=220556&viewfull=1
tp_SYN3202.img is the latest, but it says it will break touch screen in recovery and on non-stock roms if done incorrectly.
I would ask this question in captain_throwback's latest firmware thread before you install tp_SYN3202.img
I'm only pointing you in the right direction, I have NO experience with updating the touch panel .img - please ask someone who has dealt with this before you do ANYTHING (I just dont want you to break your evo!)
Click to expand...
Click to collapse
Thanks mate, I'll go there to see what I can do!
Cheers and Thanks!
The newest touch panel firmware doesn't work with AOSP, AOKP, 3.15 based ROMs (or lower), or older recoveries..You need to revert to the old TP firmware before flashing any ROM not based on 3.16.
mulhiny said:
The newest touch panel firmware doesn't work with AOSP, AOKP, 3.15 based ROMs (or lower), or older recoveries..You need to revert to the old TP firmware before flashing any ROM not based on 3.16.
Click to expand...
Click to collapse
What's tp and how do i revert back to the old one? So sorry mate, im such a noob trying to learn is all.
SvetKrasivaya said:
What's tp and how do i revert back to the old one? So sorry mate, im such a noob trying to learn is all.
Click to expand...
Click to collapse
As far as I know all the files are located in Capt Throwback's firmware thread. You probably need S-Off to flash them though. The new 3.16 OTA updated the touchscreen's firmware. This new update is only good with the latest TWRP and 3.16 based roms..so to flash anything on the old base or AOSP you need the old touchscreen firmware. Hope that clears it up a little.
Sent from my EVO using Tapatalk 2
mulhiny said:
As far as I know all the files are located in Capt Throwback's firmware thread. You probably need S-Off to flash them though. The new 3.16 OTA updated the touchscreen's firmware. This new update is only good with the latest TWRP and 3.16 based roms..so to flash anything on the old base or AOSP you need the old touchscreen firmware. Hope that clears it up a little.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Yes, I've finally got it to work! Thanks for all the support. All I had to do was follow dirty racun's s-off method. For some reason doing that my build number went from 3.16 to 3.15 and my band version downgraded from 1.12.11.1210 to 1.12.11.1119.
SvetKrasivaya said:
Yes, I've finally got it to work! Thanks for all the support. All I had to do was follow dirty racun's s-off method. For some reason doing that my build number went from 3.16 to 3.15 and my band version downgraded from 1.12.11.1210 to 1.12.11.1119.
Click to expand...
Click to collapse
Awesome! Enjoy the freedom of your S-Off device.
Sent from my EVO using Tapatalk 2
I seem to have the same problem.
I'm running the viper rom on my evo 4g. Was going to upgrade to the latest version and wanted to update firmware first.
I grabbed the latest twrp (4.2.1) installed that, rebooted.
I then grabbed the latest firmware from themikmik, installed that and rebooted.
And i then grabbed the tp_syn3202 update and installed that and rebooted
And now my touch screen does not respond to any touch input. I don't know what to do at this point since they only thing i can do is either force the phone to reboot, or go into hboot by holding down the volume down and camera keys. And all that does is ask me if i want to reinstall the tp update.
I don't know how to get into twrp to even try and install the latest rom assuming that would fix the issue.
merkk said:
I seem to have the same problem.
I'm running the viper rom on my evo 4g. Was going to upgrade to the latest version and wanted to update firmware first.
I grabbed the latest twrp (4.2.1) installed that, rebooted.
I then grabbed the latest firmware from themikmik, installed that and rebooted.
And i then grabbed the tp_syn3202 update and installed that and rebooted
And now my touch screen does not respond to any touch input. I don't know what to do at this point since they only thing i can do is either force the phone to reboot, or go into hboot by holding down the volume down and camera keys. And all that does is ask me if i want to reinstall the tp update.
I don't know how to get into twrp to even try and install the latest rom assuming that would fix the issue.
Click to expand...
Click to collapse
You can't get into the bootloader? Also, are you on the evo 4g lte?
SvetKrasivaya said:
You can't get into the bootloader? Also, are you on the evo 4g lte?
Click to expand...
Click to collapse
nevermind - i got it. I didn't realize if i left the PJ75img.zip file on there it would automatically go into trying to update and not give me any other option. I deleted that file and then i was able to get into twrp and install the rom update.
Thanks
mulhiny said:
As far as I know all the files are located in Capt Throwback's firmware thread. You probably need S-Off to flash them though. The new 3.16 OTA updated the touchscreen's firmware. This new update is only good with the latest TWRP and 3.16 based roms..so to flash anything on the old base or AOSP you need the old touchscreen firmware. Hope that clears it up a little.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I have the same problem. EVO 4g lte s off 3.17 . touchscreen wont work with jellybam . i tried following the directions you posted but i still dont get it. Do you mind helping a noob out ? Maybe some step by step instructions ? Will be much appreciated. Thanks !
elgordo562 said:
I have the same problem. EVO 4g lte s off 3.17 . touchscreen wont work with jellybam . i tried following the directions you posted but i still dont get it. Do you mind helping a noob out ? Maybe some step by step instructions ? Will be much appreciated. Thanks !
Click to expand...
Click to collapse
You have to downgrade your touch panel driver to the 3.15 version. Check the thread below and go to the downloads link in the first post. The touch panel driver is installed the same way you upgrade firmware, through the bootloader.
http://forum.xda-developers.com/showthread.php?t=1704612
On the page with the downloads, the touch panel zip is in the second post and is labeled " tp_SYN3202.img zip". If you've forgotten how to do a firmware update, hit the top link in my sig and look for the section on firmware updates.
Seriously though, there are plenty of newer, up-to-date ROM's out there. Why would you bother with this one?
Sent from my HTC EVO 4G LTE
FinZ28 said:
You have to downgrade your touch panel driver to the 3.15 version. Check the thread below and go to the downloads link in the first post. The touch panel driver is installed the same way you upgrade firmware, through the bootloader.
http://forum.xda-developers.com/showthread.php?t=1704612
On the page with the downloads, the touch panel zip is in the second post and is labeled " tp_SYN3202.img zip". If you've forgotten how to do a firmware update, hit the top link in my sig and look for the section on firmware updates.
Seriously though, there are plenty of newer, up-to-date ROM's out there. Why would you bother with this one?
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Wow ! Exactly what i was asking for ! I really cannot thank you enough !! Thanks for your time and patience ! Really appreciate it !
Are there any roms you can recommend me ?
Any of the 3.16 or 3.17 Sense ROM's in the Development section, the Sense 5 ports.....and there are a ton of AOSP ROM's in Original Development to choose from. Just try them all until you find what suits you
Sent from my HTC EVO 4G LTE
looks like were getting a new update
so is an OTA an RUU?
if it is. than is it ok to make a nandroid backup and restore on a new RUU?
EDIT: i think the rom would have to support a certain version of an RUU?
http://www.androidpolice.com/2013/02/18/htc-rezound-and-icredible-2-receiving-minor-ota-updates/
Something doesn't seem right about this. Baseband versions are old, pre-global firmware. I thought the 3.14.605.12 came with the global radios?
Looks like a very minor update.
It probably won't come with global radios, as that was the 4.03.605.x version.
And for op, your nandroid won't work going from one firmware version to another
Sent from my ADR6425LVW using xda app-developers app
hope it ain't a bootloader lockdown, like they did with my note 2
Sent from my SCH-I605 using Tapatalk 2
so these will be flashable for ppl with custom roms or do i have to go back to stock to get the update and flash back to my rom?
Or for only stock roms?
Sent from my ADR6425LVW using xda app-developers app
mike7728 said:
hope it ain't a bootloader lockdown, like they did with my note 2
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I don't think HTC is going to do that.
FYI: Thread started about 10 mins before yours yesterday, ha!
http://forum.xda-developers.com/showthread.php?t=2154288
thelunchboxosu said:
FYI: Thread started about 10 mins before yours yesterday, ha!
http://forum.xda-developers.com/showthread.php?t=2154288
Click to expand...
Click to collapse
haha, srry didnt look.
To answer an OP question, an OTA is not an RUU. OTA = over the air. An RUU is essentially a full device dump. An OTA normally only contains the changes since the previous version. I haven't seen an RUU version of this update in the wild yet.
bunchies said:
haha, srry didnt look.
Click to expand...
Click to collapse
No worries at all, just wanted to make sure everyone saw both threads!
socal87 said:
Something doesn't seem right about this. Baseband versions are old, pre-global firmware. I thought the 3.14.605.12 came with the global radios?
Click to expand...
Click to collapse
Thing you have to realize, the Global RUU was/is a leak with a build # 4.03.605.2. I'm looking into making an RUU for you guys that contains the OTA. If you're s-off, I say play with the global radios, if s-on stay with the ota firmware.
OTA 4.4.2 Available firmware is here downloading now!
http://www.verizonwireless.com/droiddnaupdate/
http://m-support.verizonwireless.com/support/system_update/droiddna.html
2 part update, first one is small ~5mb second one is 618mb
Spider210 said:
OTA 4.4.2 Available firmware is here downloading now!
http://www.verizonwireless.com/droiddnaupdate/
http://m-support.verizonwireless.com/support/system_update/droiddna.html
2 part update, first one is small ~5mb second one is 618mb
Click to expand...
Click to collapse
can you share the two ota files?
Yep, confirmed here too. Had checked software update about 30 minutes ago and nothing. Then checked now and it gave some small prep update. That is installing now.
Completely stock here, never rooted or unlocked or anything. Because of that I think my update will be just fine
Tersanyus said:
Yep, confirmed here too. Had checked software update about 30 minutes ago and nothing. Then checked now and it gave some small prep update. That is installing now.
Completely stock here, never rooted or unlocked or anything. Because of that I think my update will be just fine
Click to expand...
Click to collapse
You should have unlocked s-off cause the update says blocks rumrunner security off as a 'bug fix'
Tersanyus said:
Yep, confirmed here too. Had checked software update about 30 minutes ago and nothing. Then checked now and it gave some small prep update. That is installing now.
Completely stock here, never rooted or unlocked or anything. Because of that I think my update will be just fine
Click to expand...
Click to collapse
goodman_east said:
can you share the two ota files?
Click to expand...
Click to collapse
Already almost finished installing otherwise I would have grabbed them, i'm sure someone will be kind enough to grab them and upload them :good:
Spider210 said:
You should have unlocked s-off cause the update says blocks rumrunner security off as a 'bug fix'
Click to expand...
Click to collapse
He can be our guinea pig and see if firewater still works on the new update.
orangechoochoo said:
He can be our guinea pig and see if firewater still works on the new update.
Click to expand...
Click to collapse
How would I install thus if I am unlocked anf s-off with twrp installed?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
I don't think I'm going to do anything to this phone. I know it's odd that someone on XDA doesn't root or unlock or anything like that. I actually learned a hard lesson with the DNA. When I got it in early 2013 I bricked it. It could have been hardware related too. The display did funky things. It was replaced under warranty.
I used the replacement for some time before I sold it off then moved on to other phones. Back in January I saw on for sale on Craigslist. I bought it for like $60 but it was a bit beat up. Small crack on the top right of the screen and scratches everywhere. Now my DNA is mostly a spare phone.
What I find funny is the DNA now has KitKat and my primary phone is a Verizon Note 3 and it doesn't yet have KitKat officially. I did take the "leak" of KitKat and it is great. That's as close to any hacking I have done in ages. Probably should not have taken that leak for the Note 3 but too late.
My DNA is still installing the update. May try rooting but would rather not brick this phone.
At least you need to be on the stock recovery and ROM, I'm not sure if being s-on is required.
Give it some time, someone will post the new radio, hboot, and rom.
---------- Post added at 09:49 AM ---------- Previous post was at 09:46 AM ----------
Tersanyus said:
I don't think I'm going to do anything to this phone. I know it's odd that someone on XDA doesn't root or unlock or anything like that. I actually learned a hard lesson with the DNA. When I got it in early 2013 I bricked it. It could have been hardware related too. The display did funky things. It was replaced under warranty.
I used the replacement for some time before I sold it off then moved on to other phones. Back in January I saw on for sale on Craigslist. I bought it for like $60 but it was a bit beat up. Small crack on the top right of the screen and scratches everywhere. Now my DNA is mostly a spare phone.
What I find funny is the DNA now has KitKat and my primary phone is a Verizon Note 3 and it doesn't yet have KitKat officially. I did take the "leak" of KitKat and it is great. That's as close to any hacking I have done in ages. Probably should not have taken that leak for the Note 3 but too late.
My DNA is still installing the update. May try rooting but would rather not brick this phone.
Click to expand...
Click to collapse
The leaked kk update for the Note3 looks friendly
http://www.droidforums.net/forum/an...e-ota-update-verizon-galaxy-note-3-again.html
I'm not on stock recovery. Perhaps I'll wait.
EDIT:
The heck with it. I reflashed stock recovery using fastboot. I'll give it shot.
orangechoochoo said:
At least you need to be on the stock recovery and ROM, I'm not sure if being s-on is required.
Give it some time, someone will post the new radio, hboot, and rom.
Click to expand...
Click to collapse
stock recoery
stock rom，you can root, but build.prop cannot be modified.
s-on+locked, or s-on+relocked, or s-off( locked, unlocked, or relocked will be ok)
your rom version must be 3.06.605.4
Anybody have the radios extracted for this yet? If you do, post them
Update installed. Besides what's mentioned in the links on previous thread... Zoe camera mode is there
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Spider210 said:
You should have unlocked s-off cause the update says blocks rumrunner security off as a 'bug fix'
Click to expand...
Click to collapse
Can you post a link to the "bug fixes & change log" details? thanks
joshkoss said:
Update installed. Besides what's mentioned in the links on previous thread... Zoe camera mode is there
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Were you S-Off and rooted, with stock rom? and after the update did you remain rooted and s-off with no issues? if so what method did you use to get s-off?
This is a 2 part download, the initial one was about 30MB and it rebooted. Part 2 is 618MB.
Mine's downloading now but I'm at work so I can't capture the OTA unfortunately.
You have to manually initiate the update scan both times.
djisback said:
Were you S-Off and rooted, with stock rom? and after the update did you remain rooted and s-off with no issues? if so what method did you use to get s-off?
Click to expand...
Click to collapse
Was stock 3.0.6 previous.
No s off
Sent from my HTC6435LVW using XDA Premium 4 mobile app
joshkoss said:
Was stock 3.0.6 previous.
No s off
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Finished:
Android 4.4.2
Sense 5.5
Software Number 4.09.605.1
HTC SDK API Level 5.69
PRI Version 4.66_002
PRL 15296
ERI 5
Kernel:
3.4.10-g6a3a21b
[email protected] #1
SMP PREEMPT
Baseband Version
1.02.01.0207
Build Number
4.09.605.1 ck322791 release-keys
Was on stock 3.06, unlocked bootloader and s-off.
Update kept me unlocked and s-off.
Lost root during the update but I was able to flash TWRP 2.7.0.0. and re-install SuperSU without any issues.
---------- Post added at 02:00 PM ---------- Previous post was at 01:57 PM ----------
Stonent said:
Finished:
Android 4.4.2
Sense 5.5
Software Number 4.09.605.1
HTC SDK API Level 5.69
PRI Version 4.66_002
PRL 15296
ERI 5
Kernel:
3.4.10-g6a3a21b
[email protected] #1
SMP PREEMPT
Baseband Version
1.02.01.0207
Build Number
4.09.605.1 ck322791 release-keys
Click to expand...
Click to collapse
Same, except my PRL is 15287
Can someone post update(s)? Radios? Hboot?
Sent from my HTC6525LVW using Tapatalk