[Q] While charging, the S3 froze. Now there's no PIT partition. Is there a solution? - Galaxy S III Q&A, Help & Troubleshooting

Hi everyone here on xda!
I've got an international, unbranded GT-i9300 16GB bought here in Italy (so I suppose it's the european version, stock roms I flashed ended with _ITV) on August 2012, so it should be still covered by warranty.
Yet there isn't any Samsung center nearby, so I suppose I should be sending it and it will probably take some time to even have an answer.
My phone was charging, I saw the led blinking with a blue light, so I tried to unlock it. No success.
A few hours before, the phone took a screenshot by itself without even touching it. (it took it the same way it does when you press POWER+HOME)
The situation is:
If I plug it to the charger, the battery animation appears, but is frozen. I don't know if it's charging or not.
The phone doesn't boot, it only shows the Samsung boot text.
I can't power off the phone, I have to remove the battery. It only reboots when I press the Power button.
I can't enter CWM Recovery nor the stock recovery, Odin fails to flash anything because says PIT partition is missing.
I can enter Download Mode, and it says:
Odin mode
Product Name:
Custom binary download: No
Current Binary: Samsung Official
System Status: Custom​
I have read countless topics but I'm unsure if there's a solution, I only saw hundreds of people struggling to flash a ROM.
And, I'm a bit unsure on what to do now, do you know the answer to any of these questions?
1) Is there a solution to this problem, something that I can do at home?
2) Is this a case of Sudden Death Syndrome? Should it be caused by a motherboard failure?
3) If I try or manage to flash a new PIT file (unlikely, I saw that everyone with this issue couldn't) and something goes wrong, can the situation get any worse?
4) Should Samsung repair it since it should be under warranty, even if there's that Custom under System status? Should I insist if it refuses to?
5) If someone managed to solve this issue, did they receive a new phone, or the same phone with their own data? Do they also make a deep clean?
6) What is Samsung's average time to fix this issue when it receives the phone?
7) Is there a way to access the phone's internal memory to recover some data in this situation?
8) Which PIT file should I be flashing? Does it make sense to flash just the PIT file, or should I also flash a 3-file stock rom at the same time? Did someone fix this issue by doing so?
Thanks in advance for your time and your patience

EDIT:
I've been searching around the forums and i see that if Odin is giving that error there's nothing you can do. Just send it to your nearest service center for repair.

NeatWolf said:
Hi everyone here on xda!
I've got an international, unbranded GT-i9300 16GB bought here in Italy (so I suppose it's the european version, stock roms I flashed ended with _ITV) on August 2012, so it should be still covered by warranty.
Yet there isn't any Samsung center nearby, so I suppose I should be sending it and it will probably take some time to even have an answer.
My phone was charging, I saw the led blinking with a blue light, so I tried to unlock it. No success.
A few hours before, the phone took a screenshot by itself without even touching it. (it took it the same way it does when you press POWER+HOME)
The situation is:
If I plug it to the charger, the battery animation appears, but is frozen. I don't know if it's charging or not.
The phone doesn't boot, it only shows the Samsung boot text.
I can't power off the phone, I have to remove the battery. It only reboots when I press the Power button.
I can't enter CWM Recovery nor the stock recovery, Odin fails to flash anything because says PIT partition is missing.
I can enter Download Mode, and it says:
Odin mode
Product Name:
Custom binary download: No
Current Binary: Samsung Official
System Status: Custom​
I have read countless topics but I'm unsure if there's a solution, I only saw hundreds of people struggling to flash a ROM.
And, I'm a bit unsure on what to do now, do you know the answer to any of these questions?
1) Is there a solution to this problem, something that I can do at home?
Try new battery .
2) Is this a case of Sudden Death Syndrome? Should it be caused by a motherboard failure?
Possible reads the sds thread
3) If I try or manage to flash a new PIT file (unlikely, I saw that everyone with this issue couldn't) and something goes wrong, can the situation get any worse?
Yes
4) Should Samsung repair it since it should be under warranty, even if there's that Custom under System status? Should I insist if it refuses to?
No warranty is void .
If someone managed to solve this issue, did they receive a new phone, or the same phone with their own data? Do they also make a deep clean?
Data is on the motherboard and lost .
8) Which PIT file should I be flashing?
The one for your firmware.
jje
Sent from my GT-N8010 using xda premium
Click to expand...
Click to collapse

Well then, thanks for your answers and your time
I think I have no choice... I recovered my phone from various other situations, but I suppose I should have updated my Android version sooner, I was about to do it soon, matter of days.
It still bugs me the fact that I'll have to pay 200$ for a defect that is notoriously not related to the use of the phone, but to a production vice/bug.
Isn't really a way to restore my device status to Samsung Official in this state?

NeatWolf said:
Well then, thanks for your answers I think I have no choice... I recovered my phone from various other situations, but I suppose I should have updated my Android version sooner, I was about to do it soon, matter of days.
It still bugs me the fact that I'll have to pay 200$ for a defect that is notoriously not related to the use of the phone, but to a production vice/bug.
Isn't really a way to restore my device status to Samsung Official in this state?
Click to expand...
Click to collapse
It does not boot how will service centre know its rooted . SDS expect a motherboard swap .
Their is an XDA post by Adam Outler that states that custom rom or root does not void your warranty but Samsung say it does .
jje

JJEgan said:
It does not boot how will service centre know its rooted . SDS expect a motherboard swap .
Their is an XDA post by Adam Outler that states that custom rom or root does not void your warranty but Samsung say it does .
jje
Click to expand...
Click to collapse
Thanks
I haven't found the article but found this one about Flashing&Rooting the phone not invalidating the warranty in EU that may be interesting for future readers:
[INFO] Rooting and Flashing don't void the warranty
I'm a bit more optimist now, but sadly I live in Italy so everything can go wrong doesn't matter what the EU says.
I'll keep you posted on my experience, for future reference.

NeatWolf said:
Thanks
I haven't found the article but found this one about Flashing&Rooting the phone not invalidating the warranty in EU that may be interesting for future readers:
[INFO] Rooting and Flashing don't void the warranty
I'm a bit more optimist now, but sadly I live in Italy so everything can go wrong doesn't matter what the EU says.
I'll keep you posted on my experience, for future reference.
Click to expand...
Click to collapse
sorry deleted because wrong pit file

Related

[Q] Can Download and Recovery Mode be made available by Samsung ?

Hey Guys.
I recently Hard Bricked my Vibrant while flashing a Custom ROM. It won't turn ON at all.
I am shipping the Phone to Samsung Repair Centre in Texas from India.
I had a talk with the Call Centre where they said that I should just give them the piece without the Battery and Battery Pack and they will only repair my piece and will not Replace it anyhow.
I am fine with them just repairing my piece rather than replacing it, but the issue is that I have only Download Mode available on my piece and the Recovery Mode is Factory Disabled.
My Questions are,
1) Whether they will make the Recovery and Download Mode available back on my Vibrant after repairing it ?
2) The phone is very much off the 30 days mark for the Return Policy to work, so is it still their obligation to Replace my piece with a one that has a Recovery and Download Mode enabled on it if the repairing solution doesn't do the trick ?
3) I am shipping the Phone from India so how should I make sure that the Phone that they have Repaired or Replaced with has the Recovery and Download mode working on it ?
4) Also, in my Country we have a Samsung Galaxy S International available, so is the Motherboard of Samsung Vibrant and the International Model similar for the Service Centre over here to repair it ?
Any Help is appreciated.
Thank You.
ech419 said:
Hey Guys.
I recently Hard Bricked my Vibrant while flashing a Custom ROM. It won't turn ON at all.
I am shipping the Phone to Samsung Repair Centre in Texas from India.
I had a talk with the Call Centre where they said that I should just give them the piece without the Battery and Battery Pack and they will only repair my piece and will not Replace it anyhow.
I am fine with them just repairing my piece rather than replacing it, but the issue is that I have only Download Mode available on my piece and the Recovery Mode is Factory Disabled.
My Questions are,
1) Whether they will make the Recovery and Download Mode available back on my Vibrant after repairing it ?
2) The phone is very much off the 30 days mark for the Return Policy to work, so is it still their obligation to Replace my piece with a one that has a Recovery and Download Mode enabled on it if the repairing solution doesn't do the trick ?
3) I am shipping the Phone from India so how should I make sure that the Phone that they have Repaired or Replaced with has the Recovery and Download mode working on it ?
4) Also, in my Country we have a Samsung Galaxy S International available, so is the Motherboard of Samsung Vibrant and the International Model similar for the Service Centre over here to repair it ?
Any Help is appreciated.
Thank You.
Click to expand...
Click to collapse
So you CAN get into download mode with the Android holding a shovel in a big yellow triangle?
Also, did you ever try flashing a custom recovery? ie- clockwork
Sent from my nuclear powered submarine.
ech419 said:
Hey Guys.
I recently Hard Bricked my Vibrant while flashing a Custom ROM. It won't turn ON at all.
I am shipping the Phone to Samsung Repair Centre in Texas from India.
I had a talk with the Call Centre where they said that I should just give them the piece without the Battery and Battery Pack and they will only repair my piece and will not Replace it anyhow.
I am fine with them just repairing my piece rather than replacing it, but the issue is that I have only Download Mode available on my piece and the Recovery Mode is Factory Disabled.
My Questions are,
1) Whether they will make the Recovery and Download Mode available back on my Vibrant after repairing it ?
2) The phone is very much off the 30 days mark for the Return Policy to work, so is it still their obligation to Replace my piece with a one that has a Recovery and Download Mode enabled on it if the repairing solution doesn't do the trick ?
3) I am shipping the Phone from India so how should I make sure that the Phone that they have Repaired or Replaced with has the Recovery and Download mode working on it ?
4) Also, in my Country we have a Samsung Galaxy S International available, so is the Motherboard of Samsung Vibrant and the International Model similar for the Service Centre over here to repair it ?
Any Help is appreciated.
Thank You.
Click to expand...
Click to collapse
So let me get this straight...
I'm assuming u rooted the phone b/c you must in order to even attempt to flash a custom rom...
So you want to send a rooted phone in for repair??
Its very hard to brick the vibrant....u probably have a soft brick....did u try Odin to restore your phone back to stock?? Try that before sending it anywhere
Sent from my XDA app cuz I'm stalking your mom....
Mr. Apocalypse said:
So let me get this straight...
I'm assuming u rooted the phone b/c you must in order to even attempt to flash a custom rom...
So you want to send a rooted phone in for repair??
Its very hard to brick the vibrant....u probably have a soft brick....did u try Odin to restore your phone back to stock?? Try that before sending it anywhere
Sent from my XDA app cuz I'm stalking your mom....[/QUOTE
Sounds to me like he probably doesn't know about odin.
Sent from my nuclear powered submarine.
Click to expand...
Click to collapse
Thanks for Reply.
No, Guys. I know what Odin is.
The phone is Hard Bricked. That means nothing will show up on the screen to do anything at all. It is a well known issue and it is very much possible with your phone too.
From what I have read on the forum, the USB doesn't work due to some bootloader corruption and thus you will not be able to try anything on your phone and Wires need to be physically soldered onto the Motherboard to flash the bootloader and Stock ROM.
I want to enquire about the issue of whether Download and Recovery Mode which comes factory disabled in the newer Vibrants, be enabled by Samsung itself ?
Thanks for your Help.
ech419 said:
Thanks for Reply.
No, Guys. I know what Odin is.
The phone is Hard Bricked. That means nothing will show up on the screen to do anything at all. It is a well known issue and it is very much possible with your phone too.
From what I have read on the forum, the USB doesn't work due to some bootloader corruption and thus you will not be able to try anything on your phone and Wires need to be physically soldered onto the Motherboard to flash the bootloader and Stock ROM.
I want to enquire about the issue of whether Download and Recovery Mode which comes factory disabled in the newer Vibrants, be enabled by Samsung itself ?
Thanks for your Help.
Click to expand...
Click to collapse
Have you heard from Samsung yet as to how much the repair cost will be? I have to send mine there after a Kies update killed by boot loader (the most common reason why a Galaxy S won't show any signs of life and only way to truly brick them). I had a local repair shop jtag it before Kies killed it again, but they couldn't fix the hardware lock.
I got it to a point like that as well. Even when I plugged it in to charge and such, nothing happend. I was still able to ODIN it though. What I had to do was just the battery pull method of putting it into download mode (pull battery, sim and sd cards, open ODIN, connect phone to pc, pop in battery while holding volume buttons) and it worked for me.
Like others say, it's really difficult to hard-brick Vibrants. If either primary or secondary bootloader has been corrupted, you shouldn't have Download mode. Try search more and find out what others did to get out of such situations. You should be able to flash away UNLESS your internal SD card has been fried/messed up. The repair will probably cost you ridiculously large sum of money. Samsung will probably replace internal SD memory (I think it's MoviNAND flash memory module) and flash new firmware. But again it will cost money. I would do everything I can possibly think I can do before sending it off to repair centers.
EDIT: If it is your cellular carrier accepting your phone for examination and think that the cause is hardware malfunction, the carrier will REPLACE your phone. If you are not sending it to your carrier, however, and you are sending it directly to Samsung repair center instead, they will most likely incur repair fees. Not sure 100% but Samsung must be able to tell if you've ever flashed custom firmware and flashing custom kernels and ROMs void manufacturer's 1 year warranty. And this will probably be true unless you flash a stock ROM before shipping it, but this is ironic and according to you doing so is impossible. Try Odin JFD again!
sharkethicx said:
I got it to a point like that as well. Even when I plugged it in to charge and such, nothing happend. I was still able to ODIN it though. What I had to do was just the battery pull method of putting it into download mode (pull battery, sim and sd cards, open ODIN, connect phone to pc, pop in battery while holding volume buttons) and it worked for me.
Click to expand...
Click to collapse
I take it yours wasn't hardware locked then. It's interesting that you were still able to get Odin to recognise the phone when it wasn't showing any sign of life. Were the lights turning on?
jaetm83 said:
Like others say, it's really difficult to hard-brick Vibrants. If either primary or secondary bootloader has been corrupted, you shouldn't have Download mode. Try search more and find out what others did to get out of such situations. You should be able to flash away UNLESS your internal SD card has been fried/messed up. The repair will probably cost you ridiculously large sum of money. Samsung will probably replace internal SD memory (I think it's MoviNAND flash memory module) and flash new firmware. But again it will cost money. I would do everything I can possibly think I can do before sending it off to repair centers.
EDIT: If it is your cellular carrier accepting your phone for examination and think that the cause is hardware malfunction, the carrier will REPLACE your phone. If you are not sending it to your carrier, however, and you are sending it directly to Samsung repair center instead, they will most likely incur repair fees. Not sure 100% but Samsung must be able to tell if you've ever flashed custom firmware and flashing custom kernels and ROMs void manufacturer's 1 year warranty. And this will probably be true unless you flash a stock ROM before shipping it, but this is ironic and according to you doing so is impossible. Try Odin JFD again!
Click to expand...
Click to collapse
I'm trying to find out exactly how much Samsung would charge to repair a screwed up boot loader caused by a Kies update. The device was flashed to stock prior to the update; however, there is a TiBu folder on the internal sd. The Samsung agent I spoke with opened a support ticket and said it would be repaired under warranty as long as nothing was done to the device to void the warranty. I'm trying to decide whether to have it jtagged and still have it hardware locked, or take a chance and send it to Samsung for a proper repair, fixing the hardware lock and boot loader.

[Q] phone brick? appears to be dead after flash crash, nothing on display, no usb

heya all!
i just got my GT-I9100 today; it was bought from A1 (part of vodafone) austria, but it does not have a simlock, they usually "lag behind" with those and business customers seem to be able to get some of the first models that do not have any lock yet.
but thats not the issue; i fiddled around with a few things, namely: root it with that superoneclick thingie, install rom manager, (unsuccessfully) try to flash clockworkmod recovery with it, ..
and then i realized that it does not actually replace the "android system recovery 3e" at all, for some reason. actually i seemed to have both the 2e and the 3e version available SOMEwhere, when i did an "adb reboot recovery" i got into the 3e version, with some key combo i managed to get into 2e (i think it was vol-down + power)
in any case, after searching forums for a while i found info that people have been installing "darky's 9.2 resurrection" in this case because it kind of completely wipes everything and gives a clean base to start with.
so i tried that, and i think it was a bad idea to actually re-partition with odin with the included PIT file. in any case, the flashing process completely halted right after it started; after many minutes i unplugged the phone, odin immediately gave me a red FAIL label, and since the phone didn't react anymore i power cycled it via its battery. i guess that was the second mistake
now i'm stuck in a state of complete darkness. the appearently common issue of "black screen after logo" is something different, i don't get ANY reaction from the phone WHATSOEVER. regardless of what keys i press in what combinations etc, it acts as if the battery was completely empty (which it definitely is not). USB does not do anything either.
i also noticed that the phone got unusually warm in the area of the camera, not like HOT, but warmer than i was able to get it by just toying around with it the hour before. i mean, if i try to turn it on and stuff, so it looks to me as if it is doing something, but it cannot even initialize the display or usb.
i ordered some components and will try this method http://forum.xda-developers.com/showthread.php?t=819551 even tho it explicitly states that it won't help against all-blackness, just in case.
anyone got any ideas of what i could still do? or is trying to get a replacement from the carrier my only option?
just for additional info, i also have 2 HTC desires, and never managed to brick them to death, i have some clues about adb and the sdk in general, i'm not completely clueless when it comes to android, but since i don't even get any kind of touchable interface (usb wise) i'm out of ideas...
thanks & regards
hi mate darkys rom is for the samsung galaxy s not the gaxy s 2 and clockwork mod wont work either
andypull15 said:
hi mate darkys rom is for the samsung galaxy s not the gaxy s 2 and clockwork mod wont work either
Click to expand...
Click to collapse
hmn i kind of wasn't sure about darkys rom after my attempts anymore
in the beginning i thought the galaxy s2 was actually called i9000, until i opened it once again and say that it states 9100
but in any case - is there anything i can do, software wise?
anyone got any ideas of what i could still do? or is trying to get a replacement from the carrier my only option?
Fake /wrong rom they may reject it under warranty .
http://forum.xda-developers.com/showthread.php?t=1075278
Try flash a stock rom .
jje
JJEgan said:
anyone got any ideas of what i could still do? or is trying to get a replacement from the carrier my only option?
Fake /wrong rom they may reject it under warranty .
http://forum.xda-developers.com/showthread.php?t=1075278
Try flash a stock rom .
jje
Click to expand...
Click to collapse
well thats the problem, i can't flash anything. i have no way of going into download mode, or any other mode, its just "dead".
Try to use the "magical cable", i think this cable work also on SG2 and not only the SG1 ... There is a lot sellers on ebay.
Sorry did i not mention the download mode recovery jig .
If it boots via the recovery jig to download mode you may be able to fix or at least fix enough to claim warranty .
jje
yep i guess i will get the components on monday (and i need to borrow a soldering iron
i already got info from the carrier that they will replace it, i just hope they won't look at it too much
can tyou tell us if tyou succeded ? I'm in the exact same situation.
makrook said:
can tyou tell us if tyou succeded ? I'm in the exact same situation.
Click to expand...
Click to collapse
heys, i got a replacement from the carrier for free, and i'm not gonna brick it just to retest *g*
i ordered components for the usb rig and they already arrived, but i have not yet found time to test it, partly because i don't really need it - this time i did not make the mistake of flashing a wrong partition table......
regards
additional info: i'm on cognition S2 now. before i went there, i flashed 3-part stock 2.3.4 firmware, and this time, it was the right PIT file *g* so everything worked like a charm.

[Q] Can I get warranty back doing this? (3 questions)

I have a few questions, I'll put them up right away so the impatient may avoid reading my boring story. Beneath the questions are my explanation.
1. It seems to me the flash counter only goes up when I flash non-original firmware. I've flashed twice; once to root, then once again to go back to stock. My counter says 1. Am I correct in assuming this, then?
2. My phone came with astrange and, I think, not widely used firmware called XWKG1. Can I upgrade to ICS using any method, ie. will any ICS-ROM work with my phone?
3. Then I can root, and use Triangleaway to reset flash-counter, right?
And if the answer to question #1 is "yes", I could flash back to stock and have no warranty problems?
Backstory:
I - like many others - downloaded some ROM to get root on my phone. That's all I wanted, just root, no custom UI or anything, so I just downloaded something called CF I think? I'm not very knowledgable about all this, so bear with me.
Now the USB connector and battery is starting to get real weird. In short; my phone thinks USB cable is connected all the time; my phone won't start (says battery is too hot) unless I have a charger plugged in; strange driver issues when trying to connect the phone to a PC, the device is not recognized about 80% of the time; battery drains SUPER quickly. And more probably.
Now this sounds like a hardware issue to me, and should be covered by the warranty no matter if I choose to root my phone or not. But I'm worried Samsung may not share my opinion there. I've flashed back to stock firmware I got with my phone (XWKG1 - I bought my phone from a French company operating in Norway called Pixmania, which gave me this strange version), and the yellow triangle is gone. But flash counter says 1. This could be a problem.
I'd send it back to pixmania straight away. I'm in Norway, I've used pixmania abefore, they're quick and helpful, and I'd guess they'll replace it straight away.
To be honest, I can't remember if stock flashing increases the counter or not. Buy a jig anyway, they're cheap and useful.
Don't think your firmware's that strange, pretty sure I had XWKG1 at some point. Old yes, strange no.
Thanks for the answer. So Pixmania won't just send it to Samsung who will reject it? Have you tried sending rooted phones to them? My phone doesn't have any external damage, but it is currently not covered under Samsungs warranty!
Also, don't know if an USB jig would work since the phone's USB-port is so broken.
reking said:
Thanks for the answer. So Pixmania won't just send it to Samsung who will reject it? Have you tried sending rooted phones to them? My phone doesn't have any external damage, but it is currently not covered under Samsungs warranty!
Also, don't know if an USB jig would work since the phone's USB-port is so broken.
Click to expand...
Click to collapse
Yep, rooted my brother-in-law's SGS last year. He returned it to pixmania because his home button wasn't working, got a replacement within a week. He'd forgotten it was rooted, but pixmania either didn't notice or didn't care.
Assuming you flashed via a USB/PC connection before , it's probably worth the risk to try 2 and 3. Or if you don't want to risk your USB port, try Mobile Odin.
reking said:
I .
1. It seems to me the flash counter only goes up when I flash non-original firmware. I've flashed twice; once to root, then once again to go back to stock. My counter says 1. Am I correct in assuming this, then?
Thats what it is .
2. My phone came with astrange and, I think, not widely used firmware called XWKG1.
Its not strange .
Can I upgrade to ICS using any method, ie. will any ICS-ROM work with my phone?
When ICS is released it should upgrade .
But not if you root or put custom firmware Kies may no longer offer the iCS upgrade . You wil have to flash a stock ICS firmware .
3. Then I can root, and use Triangleaway to reset flash-counter, right?
And if the answer to question #1 is "yes", I could flash back to stock and have no warranty problems?
Yes
Now this sounds like a hardware issue to me, and should be covered by the warranty no matter if I choose to root my phone or not. But I'm worried Samsung may not share my opinion there. I've flashed back to stock firmware I got with my phone (XWKG1 -
Warranty void if custom rom and that included beta ICS warranty void if phone rooted warranty void if custom rom counter above zero .Thats the official Samsung letter to service centres .
jje
Click to expand...
Click to collapse

[Q] Galaxy s2 GT-I9100 Complete dead

Dear Forum members i am new to this forum please help me to boot up my Phone :
After rooting using odin i have installed custom rom all working fine later tried to install another using odin selected .PIT file & re partition was checked in the middle Odin stopped responding disconnected the phone & phone stopped as attached image later battery empty. Now its completely dead no light no logo no boot sign tried to enter download mode, recovery mode, connecting to pc using kies, Odin nothing working.
Please help me to get the phone back to working
Thanks in advance
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Cosmic Blue said:
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Click to expand...
Click to collapse
Thanks for quick reply. can you please tell me where Jtag is available in India people who do it?
Thanks in advance.
For the first time i used forum and its really helpfull.
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
chetankalburgi said:
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
Click to expand...
Click to collapse
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
ctomgee said:
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
Click to expand...
Click to collapse
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
@OP: I'm with this guy. Try a usb jig before jtag.
chetankalburgi said:
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
Click to expand...
Click to collapse
Customer service may not know but if you talk to the technician he will know but may not want to do it as they will not make as much money as replacing the motherboard.
If you check the service manual that are posted on in this forum. one of the steps before replAcing the motherboard is using jig then jtag before you replace MB.

No boot or recovery

Hi everyone,
Complete Noob here, and not proud of it.
I've been searching through your awesome forum now for the past few days trying to get an answer to a problem I have with my GT-I9300, but unfortunately i just seem to keep coming up with more and more problems. So begrudingly I have come to beg for help in the form of a new thread.
I had the phone running rooted with CWM and Cyanogen 10.1 with a fair amount of problems, it kept locking up.
So i was advised one of the best solutions would be to use a more stable version of Cyanogen so re flashed with 9. It worked pretty brilliantly up until some apps were updating and it just completely froze, at the time this was not a strange occurance because of the previous freezing issues i had. So i just restarted the phone.
I then get a message that the firmware has become corrupted and i need to re-install emergency firmware with Kies, tried this. nothing happened.
It has now come to only allowing me to boot into download mode, if i attempt a standard boot, or a recovery boot it goes into a white screen, which almost looks like static on an old analogue TV.
I am at my complete end with this phone, I have tried many re-flashes and versions of PDA files via ODIN and nothing has worked, I always seem to get a PIT Partition error.
I have now been trying to get this to work for at least 20 hours of my life and its finally enough, I would just be incredibly thankful if someone could let me know the problem and if there is a solution to this, I am yet to find anyone else suffering with this white static picture on boot.
When i boot into download mode, i get the red ODIN MODE setting, no product name, no custom binary download, the current binary is 'Samsung official' and the system status is custom.
I have tried reflashing to samsung stock, and that even fails.
Many thanks in advance. Any help will be greatly appreciated.
Reads as you need a service centre either damaged PIY or more likely damaged Nand .
jje
JJEgan said:
Reads as you need a service centre either damaged PIY or more likely damaged Nand .
jje
Click to expand...
Click to collapse
Agreed.
Please people, don't go back to ICS! It is unable to prevent your eMMC from death.
I heard that version 9 doesn't have the sudden death fix :/ Sorry mate you gotta take to to repair center.
Sent from my GT-I9300 using xda app-developers app
cheers everyone. I think deep down i knew that this would be the case.
Big expensive bill for me coming up i imagine.
Thanks again.
Service centre say my phone wont boot i this the sudden death syndrome .
Is what i would ask and just look dumb .
jje
coop_80 said:
cheers everyone. I think deep down i knew that this would be the case.
Big expensive bill for me coming up i imagine.
Thanks again.
Click to expand...
Click to collapse
Sudden death :/

Categories

Resources