Related
Hello..
me phone is in boot loop mode because i reinstall systemUI.apk..
so i decide to use androidSDK tools..
because i dont want to wipe all the system file using seus or flash..
i allready install SDK tools..
after i read many thread there is requirement to Preparing the phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
Click to expand...
Click to collapse
how come can i go to settings if i in boot loop..
so anyone plssss tell me what to do..
plsss help me to fix this..
im newbie to android..
thx in advance for your coorporation :|
Hi, same problem here.
I'm in bootloop and cannot access my phone. I've read many threads and found no solution. Have u found any solution?
I'm really stuck & dont know anything else to do...
Using flashtool.
Check that out on this forum's android development
Sent from my SK17i using XDA
as far as i know, if your phone is bootloop
the easiest thing to do is re-flashing it using flashtool.
coz u cant enter ur phone memory except the phone can be usable.
but, if the bootloop because the incompatible kernel/custom rom, try to install another kernel/cusrom. thats what i try on my phone
sorry for my bad english !
If you have clockwork recovery and did a backup of you phone while it was stable, restore it. If you don't, I advice you to start making backups before doing crazy stuff, you can access clockwork recovery by pressing the volume up key.
Assuming that you didn't do a backup, get flashtool, select the option to flash firmware, remove and reinsert the battery press the volume down key and connect it to the computer, it should be on flash mode and you should be able to flash a new rom.
Rumpelcita said:
If you have clockwork recovery and did a backup of you phone while it was stable, restore it. If you don't, I advice you to start making backups before doing crazy stuff, you can access clockwork recovery by pressing the volume up key.
Assuming that you didn't do a backup, get flashtool, select the option to flash firmware, remove and reinsert the battery press the volume down key and connect it to the computer, it should be on flash mode and you should be able to flash a new rom.
Click to expand...
Click to collapse
It's volume down, when booting. While the Sony Ericsson logo gets brighter and the blue LD turns on
I hope this is in the right section, don't know as I am new to XDA.
But I have a real issue. Here goes.
I recently updated my Xperia S to ICS. And I thought I want to root it.
So I went ahead and started, but when I should have placed a zip file on my internal memory, I extracted the files there instead.
So no, on CWM, when I am supposed to install from .zip file, I can't, since I do not have .zip file there.
I have tried almost all of the options on CWM on the phone, nothing works and I just get back to the start.
So my question is, how do I get out of the loop?
Is there any way I can access my phones files? So I maybe can put the SuperSU .zip file in the directory?
I can boot the phone in fastboot mode, but then it doesn't show on the computer.
Or maybe I can just reverse everything? An easy way, because I am not the best when it comes to this. I have found some solutions, but they ALL require that you put files on your SD card. Only problem is that my phone doesn't have SD card, only internal memory. ANd I can't access that right now.
Please help
Download Flashtools from http://androxyde.github.com/
Download a stock ftf rom from here http://forum.xda-developers.com/showthread.php?t=1599303
Put the downloaded rom in the flashtool/firmwares/ folder, then go to flashtool/drivers/ folder and run Flashtool-drivers.exe, when that has finished restart your computer.
Turn phone off, now press and hold the volume down button and connect the phone to your computer with the usb cable, when you get a green led you can let go, you are now in flash mode.
Start up flashtool, or flashtool64 if your on an x64 system, click the thunderbolt icon in the top left corner, select flashmode and click ok, in the left hand window select the rom you downloaded and then click ok in the bottom right corner.
karder said:
I hope this is in the right section, don't know as I am new to XDA.
But I have a real issue. Here goes.
I recently updated my Xperia S to ICS. And I thought I want to root it.
So I went ahead and started, but when I should have placed a zip file on my internal memory, I extracted the files there instead.
So no, on CWM, when I am supposed to install from .zip file, I can't, since I do not have .zip file there.
I have tried almost all of the options on CWM on the phone, nothing works and I just get back to the start.
So my question is, how do I get out of the loop?
Is there any way I can access my phones files? So I maybe can put the SuperSU .zip file in the directory?
I can boot the phone in fastboot mode, but then it doesn't show on the computer.
Or maybe I can just reverse everything? An easy way, because I am not the best when it comes to this. I have found some solutions, but they ALL require that you put files on your SD card. Only problem is that my phone doesn't have SD card, only internal memory. ANd I can't access that right now.
Please help
Click to expand...
Click to collapse
Is your Bootloader unlocked?
Hello, I'm having the same problem too, but I wonder how do I "turn off" the device, since I keep pressing the top button to do this and it reboots and goes into CWM mode? Will I have to remove the battery?
Good news. Luckily I managed turn off the device. In the CWM main menu, keep the cursor positioned over the option that resets the device. Hold down the power button and immediately after, press the volume up and hold. Wait until the device vibrates 3 times. Now ready you run the procedure to connect in download mode and reinstall your firmware.
You guys must have used cmd to flash nozomi-recovery.img?
Sent from my LT26i using Tapatalk 2
Yeah, exactly. I used recovery-nozomi.img with CWM version 5.5.0.4 ... but I made a mistake in not installing SuperSU.
hdegenaro said:
Yeah, exactly. I used recovery-nozomi.img with CWM version 5.5.0.4 ... but I made a mistake in not installing SuperSU.
Click to expand...
Click to collapse
That's why I hate nozomi - recovery.img!
Nothing to worry... Happened to me too.
Use flashtool to reflash entire ftf(if you have ulbl) else use SEUS to repair (if you have lbl, I hate pcc!).
If lbl.... Then ulbl.
Use cmd to flash a custom kernel(don't use doom kernel its for gb).
Finished....
Thank... If helpful
Sent from my LT26i using Tapatalk 2
hmm
Had a similar problem.. FIxed it with a lot of reading but now dnt remeber anymore :/
I'm having this problem too...
Almost everything is ready for flashing now, except the phone is not really turning off, even after 3 vibrates when holding down power and volume up... It turns off, but coming back in flash process!
That's how far I can go: It turns off, I hold down volume down, connect it to PC, have a green light. Flashtool see the phone, I push Flash button,Program gives "Device connected in flash mode" message, then "Selected Xperia s (LT26i)_WORLD_6,1,A,2,50_IT.flf" message, "Preparing files for flashing" message and "Device disconnected" message, because this stupid Recovery back on my screen again...
If I just can find the way to turn off my phone, so it's not come back to live when connected to PC...
hdegenaro said:
Good news. Luckily I managed turn off the device. In the CWM main menu, keep the cursor positioned over the option that resets the device. Hold down the power button and immediately after, press the volume up and hold. Wait until the device vibrates 3 times. Now ready you run the procedure to connect in download mode and reinstall your firmware.
Click to expand...
Click to collapse
Please, tell me which option do you mean..? It's no such an option like "Reset the device"...
SOLVED!
I manage to fix it!
Just wait for Flashtool to give error message (with phone picture and USB cable in it) and ask to reconnect device. Unplug device, press power button and volume up button until vibrate 3 times. Push volume down and plug usb cable, to get green light. Flashtool continue process from where it was broken.
Error message popped up not from first try, so hopefully this will be helpful to somebody...
Sorry for my english...
Many Thanks
a lot of thanks.....
My phone was stuck in CWM mode. After going through this post, i could recover my phone in normal mode
neel-arnab said:
a lot of thanks.....
My phone was stuck in CWM mode. After going through this post, i could recover my phone in normal mode
Click to expand...
Click to collapse
You wrong section!
Xperia P, U, Sola, Go Q&A, Help & Troubleshooting
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
Hello Good People,
My Z Ultra arrived and it was already rooted from the previous owner.
I booted up into TWRP and couldn’t do a backup because it would not display completely on the screen, so I couldn’t select an features.
I had to reboot the device by holding the power button and the volume up key.
Sadly I can no longer access recovery.
I have holding the volume up button will reboot but it simply takes me to the desktop(normal boot)
I have rooted all my devices but this Z Ultra seems a bit more complicated than others.
Can some please walk me through the steps of exactly what files are needed to get me recovery back.
Also I have the TWRP Manager.app, can I choose a file can do it that way? if so which file name do I pick from the long list?
T.I.A.
I thought I resolved my issue by downloading:
ZU-lockeddualrecovery2.7.154-BETA.installer.zip
Option 1
And it reinstalled TWRP!
Device rebooted into TWRP, I created a background and rebooted the device.
Now I cannot boot/reboot into Recovery again;(
Someone said to press the up/down button a couple of times when you see the pink LED. I dont get a pink LED it goes straight to green.
Can someone please tell me what to do?
T.I.A.
The recovery may still be installed.
Turn off the device, when you see the Sony logo and the green light, hold the "volume up" button.
You should boot to recovery.
Another option is to install Xposed and the Wanam module. Then activate the Power Options menu, which allows you to reboot to recovery.
Thanks for the response.
I was able to get into recovery, and do a backup.
After the backup the phone will not reboot. It has been hours now and no button combo will get it to boot up
Need serious help please
Did you back up your TA initially? You might need to reflash to stock and start again using flashtool and the necessary ftf file.
I would recommended this. It was what helped me start off on my XZU.: http://forum.xda-developers.com/showthread.php?t=2569904
PamelaGirl said:
Thanks for the response.
I was able to get into recovery, and do a backup.
After the backup the phone will not reboot. It has been hours now and no button combo will get it to boot up
Need serious help please
Click to expand...
Click to collapse
Did you get this sorted?
Triflot said:
Did you get this sorted?
Click to expand...
Click to collapse
Yes, got it resolved.
It must have been a battery related issue during the flashing.
In the end combined with a hard reset got the device back up and running.
I lost my root and everything so now I need to locate a ROM for this Sony version.
Thanks!
Ndrutil on the Play Store is an easy way to boot from the rom into recovery also..