Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery
Related
Hi first of all just want to thanks for this forum though I know it's wrong forum I think but I can't post under Android Development. Anyway thanks again for this forum again, I was able to root my Xperia P because of this site. Just want to clarify and ask some things about this one:
-In my first attempt rooting my phone, I experienced that my phone display is not normal like it's blurry. Anyone experienced that? Then I re-root my phone again but this time I chose Superuser, in my first attempt I chose SuperSU. After that, everything went fine, display is now okay then I download and installed SuperSU (granting permission with Superuser). Having those two at the same time is okay? Though I really don't know what are these two are for.
-Then after that, I proceed in CWM Recovery. At first I'm having trouble with accessing the recovery then finally I was able to access it. Then as per guide, I chose "Backup" then I just wait after that the Backup Completed then I'm just curious what is "Choose Backup Format" so I click it then it freeze. Anyone experienced freezing in CWM Recovery? And what is "Choose Backup Format"? And fortunately, I was able to reset my phone by pressing "Volume Up + Power Button". I saw it here too in this forum, to quote:
dushyanth o korner said:
Hi, If your phone is hard bricked you can update the firmware through the flash tool.first you download the latest the firmware and put your phone into fastboot mode( press up+power) and connect the usb to the phone from your pc.and you can see the blue colour led blinks. then press the flash iconin the flash tool and select fastboot mode and flash the firmware.
Click to expand...
Click to collapse
Just want to ask as well is there any list out here about some combination button? Like this one, "Volume Up + Power" is a fastboot mode.
Thanks!
I got a slight problem with my MediaPad 7 Lite. This is what I tried:
1. Shutting it down with USB Debugging enabled.
2. Restart tablet to fastboot mode by holding volume up and power buttons
The result:
It shows an Android Logo (Yay Recovery?) and then says "Rebooting..." and restarts normally.
Any solution to get into Fastbootmode / Recovery?
?
you cannot do that unless you do flash custom recovery... What do you want to achieve anyway?
pogs24ever said:
you cannot do that unless you do flash custom recovery... What do you want to achieve anyway?
Click to expand...
Click to collapse
Can u plzz tell u how to flas recovery, becose you cant flash it if u are not in fastboot (i think so).
TNX
Diazz72 said:
Can u plzz tell u how to flas recovery, becose you cant flash it if u are not in fastboot (i think so).
TNX
Click to expand...
Click to collapse
Its risky because they not perfected it yet... There's a chance that you might brick your tablet...
You might wanna check this Russian Website link
Use chrome and translate
Mediapad 7
I also got the same problem. I got a Mediapad 7 Youth (Brother of Lite) and I cant access the recovery mode nor the fastboot mode. I tried to download CWM Recovery Manager but nothing happened It still skips and reboot. By the way I would like to flash a custom recovery but I cant find any can u please help me/us?
hi
I just tried a couple of methods of getting into stock recovery myself for the mediapad 7 lite both get same error message
fail.....reboot needed
long press power to power off.
2) at another site I found the possible reason......
power + vol up + vol down until tablet vibrates
release power and hold vol up
--- it expects to find an update image on my sdcard ....which currently I don't have.
hope that helps
I have yet to test putting an official upate on sdcard and when normal boot......update from huawei site thru system settings says no updates needed.
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Hi,
any ideas? I need your help...
I also have such a problem with my PMP5580C DUO.
It just hangs on the Bootscreen with the "The Art Hi-Tech" and the logo.
No chance to get into cwm with power+vol up and even the Hardresetbutton just switches the tablet off.
Can someone help? Or did you find a solution yet?
Thank you very much
W3hrWolf said:
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Click to expand...
Click to collapse
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
http://www.prestigio.com/catalogue/Archive_products/Multipads/MultiPad_8.0_Pro_Duo#/product-support/firmware
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
pmp5580c bootloop
Zacktamondo said:
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
Click to expand...
Click to collapse
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
AzahTabor said:
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
Click to expand...
Click to collapse
Do you have a CWM flashed already or not?
If so then I had this problem before you just need to put the update.zip on the root of the SD card then press the recovery buttons for some time like 2 minutes -some times it takes so long but it works- .
reply to me soon.
Bootloop fixed
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
AzahTabor said:
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
Click to expand...
Click to collapse
hi, i have the same fault on the same tablet, how do i fastboot? also when connected to pc it is saying it is a world cup device? thanks in advance
Bricked PMP5580C
Hello
I have bricked my Intenso Tab 814 (same as Prestigio PMP5580C). I formated the bootloader space + the recovery space, and now I can't even turn it on. The backlight of the display isn't glowing up at least. So I used my MicroUSB cable and connected to the computer, it is recognized by the computer, but I can't flash anything back with the amlogic software which I've got, I am really appreciating when someone of you can try to help me out,
thanks in advance,
AMLOGIC
Unbricked Intenso Tab 814
I have successfully unbricked an Intenso Tablet 814 also know as Prestigio PMP5580C! It had no bootloader and all partitions were formatted! This includes the bootloader, means it even showed backlight as I plugged it into the power supply. I got a rescue sd card made with Christian Troys tutorial but my tabket was nit abke to start, because the nand chip was corrupted, so I looked at the nand chip and used a scrwwdriver and put it on the 6 and 5 th point t the right side on the left side is the hole on the nand chip, after that I was able to permitt the access for the nand chip to the mainboard, so it booted from the sd card automaticaly,
Intenso Tab 814 can be unbricked! Yeah, now I need it's source to customize the recovery and boot splash + oneday the os,
Take care!
Bye bye!
Stuck in bootloop intenso tab 724
So the title says it all how can I fix it? No custom recovery only root
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
Hello! I don't know where i should post this since the UMI X3 device isn't on this site, so i just post it here...
I installed a custom rom, now it's bootlooping.
If i turn it on it will show the little boot splash screen, then the screen will go black and usually it would show the boot loading screen but it doesn't, it reboots again to the boot splash screen.
I tried searching on google, but none of the forum posts actually helped me.
I try to holds down the power button and the volume up button at the same time, but it will just do the same bootloop thing.
The home button is a touch button, and i actually already tried holding down on that but it didn't work.
I also tried holding power button and volume down, and i tried holding all the buttons down at once (power + volume up and down)... also no succes.
Now it used to work, i got into some chinese bootloader before i installed this rom.
So, basicly it won't get into any recovery. I did install clockworkmod recovery actually and it did work, yet i needed to launch it via mobile uncle tools to get into it. I think im totally ****ed now...
Pleace, is there ANY way to solve this problem?
Problem in a nutshell:
Boot looping splash screen, can't get into recovery mode. (PS: i also tried to connect it via USB but it won't find my phone...)
- Kyran
UPDATE:
I'm now able to get into recovery mode!
However i can't mount usb.
Same problem
Kyranio said:
I'm now able to get into recovery mode!
However i can't mount usb.
Click to expand...
Click to collapse
Hi Kyriano,
I have the same problem after installing the cynogenmod, does your phone work now. How did you get in the recovery mode??
posible solution
Hi,
After struggling with this issue all day i found a quite simple solution.
The cause of the bootloop in my case was the simcard. So this is what i did:
1. remove simcard tray
2. Turn the phone off and on
3. If everything is ok the bootloop stopped, if not try to reboot again
4. Download mobileuncle in the playstore
5. Open the app click on; into recovery mode
6. Recovery will open and then hopefully you made a backup.Restore it and voila!
If you did not make a back try to flash the official umi ROM.
I hope this solved your problem to.
Greets ryan