ROM V20A Jelly Bean V-4.1.2, kernel v-3.4.0
To this the rooted ROM, incorporated the CWM Recovery and with the Bootloader unlocked.
If everything in a single flashing, and with the advantage of not to lose information, you will have flasheais with this ROM (your phone will be updated of ICS to JB keeping the agenda, installed applications, photos, etc)
FEATURES
- ROOT
- Recovery ClockWorkMod
- Unlocked Bootloader
- Stock ROM
Click to expand...
Click to collapse
FLASHER
That do you at your own risk, neither I nor the Forum are responsible for if your phone breaks.
Click to expand...
Click to collapse
As in format KDZ installed as an official ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Run the program KDZ_FW_UPD.exe or UPTest_EX.rar [Before running UPTest_Ex, runs Windows Enable and activate by clicking it on the icon of the two window (next to the clock)]
* For an update (Does not delete anything)
-- We connect the phone to PC mode Software LG or PC Suit
* For a clean installation (It will erase everything, factory reset)
-- Remove the battery to the L7 and while holding the key Vol+ connect the USB to the PC
Find the ROM V20A_00.rar
Finally click Launch software update
Click to expand...
Click to collapse
That's all, I hope you serve.
Thank you
- To serj to discover how to create a ROM format KDZ
- To Copsfrance by DZCreate and DZDecrypt program and aDambi by modifying it for the L7.
- Miki89 and NormanD of XDA to discover and test the CWM and the modified Bootloader.
DOWNLOAD
Extracted from todomovillg.es ROM KDZ V20A_00 ROOT
Extracted from todomovillg.es ROM KDZ V20A_00 STOCK
Click to expand...
Click to collapse
Did it on my gf's P700 (was on stock V10K) and worked flawlessly. It is now on rooted V20a.
Thanks a lot for this easy way to do that
If i have v20a beta on my phone can i use the v20a rooted or i have to downgrade to v10k?
Sent from my LG-P700 using Tapatalk 2
In theory it should not be any problem
is this firmware from 29.03 or from 24.03? :d
This is the European OPEN ROM LGP700AT-00-V20a-EUR-XX-MAR-08-2013+0
I flashed this but it was not smooth as I was hoping,so i tried to restore ICS from and NANDroid Backup.
No signal ._. Going to flash your v10k rom again.
can you please compile with firmware from 29.03?
miki89 said:
can you please compile with firmware from 29.03?
Click to expand...
Click to collapse
This is the Open Europe. Would that your comment is?
Homero2 said:
This is the Open Europe. Would that your comment is?
Click to expand...
Click to collapse
Can you make a flashable zip for this. I'm really not comfortable using the kdz flasher ever
since I experience a bootloop after flashing the v20.
vaikz said:
Can you make a flashable zip for this. I'm really not comfortable using the kdz flasher ever
since I experience a bootloop after flashing the v20.
Click to expand...
Click to collapse
I've changed the method of flashing, now it is safer and there is no Factory Reset
I have stock ROM V10K I got with phone, so im asking if I can flash V20A over it without deleting my apps and everything. I hate that ****ing V10K because it cant be rooted to restore apps with titanium backup. Hope you will respond to this.
kristijan505 said:
I have stock ROM V10K I got with phone, so im asking if I can flash V20A over it without deleting my apps and everything. I hate that ****ing V10K because it cant be rooted to restore apps with titanium backup. Hope you will respond to this.
Click to expand...
Click to collapse
Read the second post of this topic. I did exactly that and didnt lose anything. All apps were intact.
No SIM is inserted after KDZ flash
EDIT: Just waiting for ages it came back
What is the difference between the V10K and v20a? Is there a visual difference, or just the perfomance? How much free RAM memory? I downloaded rom and waiting for answer to install
goxymaster said:
What is the difference between the V10K and v20a? Is there a visual difference, or just the perfomance? How much free RAM memory? I downloaded rom and waiting for answer to install
Click to expand...
Click to collapse
oh my friend .. v10k is ics 4.0.3 but v20a is jellybean 4.1.2
there is no much difference in the in interfence because the stock rom based on LG UI .. ofcaurse there is many new features .. speed ,apps and etc.. the stock rom always take alot of ram so you'll find about 100:180 mb when no running apps ..
if you want o take an advice ..
CM10 rom with the smartass v2 kernel, v6 supercharger, kickass kernerlizer, seeder v7, 4ycl turbo engine, AC!D Sound mod and afew tweaks of pimp my rom ... you'll get another processor core
Homero2 said:
I've changed the method of flashing, now it is safer and there is no Factory Reset
Click to expand...
Click to collapse
Thanks i'll try it later.
sent from my P700 V20a, rooted and cwm 6.0.3.0
I flashed this rom with bunch of errors, but so far i got no problems with it. Also I flashed it in EMERGENCY MODE but all my settings and accounts WASN'T erased, all data is here. (??)
Gusta_HR said:
I flashed this rom with bunch of errors, but so far i got no problems with it. Also I flashed it in EMERGENCY MODE but all my settings and accounts WASN'T erased, all data is here. (??)
Click to expand...
Click to collapse
In KDZ,you left Phone Mode on DIAG. Try with EMERGENCY if your phone is in emergency mode.
Also,did you install the USB Drivers?
Handsfree not working
Only real problem I've noticed so far is that the handsfree mutes the mouthpiece otherwise good rom
Related
Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
still the phone takes forever to boot up and i have to switch back to my old custom ROM through CMW
*I was't able to find any threads with similar problem as mine therefore i posted a new one and moderators are free to delete this if they can answer by sending me link to some other forum.
Thank you in advance
how about trying to flash a standalone kernel first and then the rom of your choice? coz sometimes the kernels that comes from roms are not very friendly towards other roms i've been using this kernel: http://forum.xda-developers.com/showthread.php?t=1521309
maybe is because the kernel that you are using is only for that custom rom, MIUI uses NE kernel or his own kernel inside zip file and aokp roms uses special aokp kernel
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
i_djoel2000 said:
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
Click to expand...
Click to collapse
you have to check "No final data verification" when flashing the ICS ftf. It should look like this: http://forum.xda-developers.com/showpost.php?p=24920288&postcount=1527
Madfysh said:
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
Click to expand...
Click to collapse
works like a charm.. awesome!
sorry for another noob question, but, how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
i_djoel2000 said:
how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Madfysh said:
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
Click to expand...
Click to collapse
got it. thanks!
the rom works perfectly now.. only left with not installing the su binary, which was linked in that aroma thread before (under v2 how to). but i think the TS removed v2 how to, and i didn't get the chance to install the su binary yet. i don't know how it will effect my phone, but it works just fine now (don't know how will it be better with the su binary, though)
Pandemic said:
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Click to expand...
Click to collapse
thanks for the advise..
but i didn't make this thread, i simply posted here because the problem looks similar. so i don't think i get what you mean
Vabby said:
Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
Click to expand...
Click to collapse
I had a similar problem - all custom ROMs I tried got stuck at the Sony logo - see http://forum.xda-developers.com/showthread.php?t=1789441. For me, it helped to install this kernel: http://forum.xda-developers.com/showthread.php?t=1679771. Spacious,Smooth & Light now boots!
Kuhhan said:
....
Click to expand...
Click to collapse
What happened?what's the issue?
Sent from my MT11i using xda premium
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Panzerfaust101 said:
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Click to expand...
Click to collapse
Install a cm7 rom first, follow op instructions. Configure and reboot the rom and now you have cm7 as base,now you can install any ics rom.
Sent from my Desire HD using xda premium
Panzerfaust101 said:
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Click to expand...
Click to collapse
Hi Panzerfaust,
I've been expecting the same issue, but then i realized that i didn't have my Bootloader UNLOCKED, so i went to this post http://forum.xda-developers.com/showthread.php?t=1254087, i downgraded back to 2.3.3 and then UNLOCK my bootloader using the information of header post of provided link
"If you aren't keeping your current device configuration (because of flashing another rom after unlocking bootloader or anything else) the simplest way to unlock is to flash stock 2.3.3 rom, root it and use the bl unlock plugin from latest flashtool"
Check attachment
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then installed it again and ran without issue
Hope that's help
Regards
vichoh said:
Hi Panzerfaust,
I've been expecting the same issue, but then i realized that i didn't have my Bootloader UNLOCKED, so i went to this post http://forum.xda-developers.com/showthread.php?t=1254087, i downgraded back to 2.3.3 and then UNLOCK my bootloader using the information of header post of provided link
"If you aren't keeping your current device configuration (because of flashing another rom after unlocking bootloader or anything else) the simplest way to unlock is to flash stock 2.3.3 rom, root it and use the bl unlock plugin from latest flashtool"
Check attachment
Then installed it again and ran without issue
Hope that's help
Regards
Click to expand...
Click to collapse
Don't think that's the issue. I've managed to install custom kernels and roms without having to flash the file for when the bootloader is unlocked, and it's overclocked as well.
z28tovette said:
Install a cm7 rom first, follow op instructions. Configure and reboot the rom and now you have cm7 as base,now you can install any ics rom.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Your tip with CM7 was spot on. Thank you for that
I am unable to connect the phone with USB debugging mode enabled to PC. Please suggest.
Currently Using:
ROM:XPERIA S ICS CM9
Device: Xperia X10i
Panzerfaust101 said:
Your tip with CM7 was spot on. Thank you for that
Click to expand...
Click to collapse
Hi, I try to do it and get the same of "Panzerfaust101". So i back again to the stock rom 2.3.3 and have it rooted and with CWM from flastool 0.9.
Tell me "Panzerfaust101" wich link you use to get the CM7 and the instalation instrutions ?
Thanks in advance,
TMacPT
TMacPT said:
Hi, I try to do it and get the same of "Panzerfaust101". So i back again to the stock rom 2.3.3 and have it rooted and with CWM from flastool 0.9.
Tell me "Panzerfaust101" wich link you use to get the CM7 and the instalation instrutions ?
Thanks in advance,
TMacPT
Click to expand...
Click to collapse
CM7 can be found from this thread http://forum.xda-developers.com/showthread.php?t=911364. You probably need to unlock your bootloader first, though, or you won't be able to flash the custom FXP kernels
Panzerfaust101 said:
CM7 can be found from this thread http://forum.xda-developers.com/showthread.php?t=911364. You probably need to unlock your bootloader first, though, or you won't be able to flash the custom FXP kernels
Click to expand...
Click to collapse
Thanks man. I´ll try it and unlock bootloader first.
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 2
Wipe Data/Factory Reset + System IF YOU COMING FROM ANOTHER ROM
Install Rom
Important, this must flash for correct booting Install Kernel from here: Kernel
Install Gapps
Reboot & Enjoy !
Click to expand...
Click to collapse
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Thanks to m4nu4l:
m4nu4l said:
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
Click to expand...
Click to collapse
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
marvincod1 said:
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 1
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
Click to expand...
Click to collapse
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
m4nu4l said:
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
Click to expand...
Click to collapse
That its correct. Thanx
Enviado desde mi LG-P700 usando Tapatalk 2
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
genomorro said:
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
reflash the v10k file, then flash cm10 trough cmw.
i almost pi**ed my pants before i saw this :S
i have just this problem
genomorro said:
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
If you have cwm, you can flash directly to cm10 or other aosp based roms like aokp, slim bean, etc. Flash the v10 baseband after the rom, then your good to go.
Sent from my LGP705G - PACman using Tapatalk.
my sim is detected, i have signal but i dont have newtork connection with mobile data..
i think the problem is in that v10 baseband, cuz roms with v20 basebands network is working
faters said:
my sim is detected, i have signal but i dont have newtork connection with mobile data..
i think the problem is in that v10 baseband, cuz roms with v20 basebands network is working
Click to expand...
Click to collapse
I think you need to add it manually or use SIM toolkit app to request for mobile internet and handset settings.
Sent from my LG-P700 using Tapatalk
Hello friends.
I am trying to fix my Lg Optimus L7 for 2 days now, i tried almost everything on the forum and still i cannot get my network working. Here is what i did so far:
Installed the Russian V10k via KDZ - Not working, i cannot get signal again
Installed 10 other KDZ files that should have "worked" but nothing
I flashed back v20a and i have network, then tried again to downgrade again no network
I Installed slimbean (when i am on v10k) and flash the zip v10baseband.zip - again no network
I get phone sim locked, network locked
Please help me, what should i do?
i'm sorry but i'm new to this kind of problem and i'm getting nowhere to the solution
marvincod1 said:
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 2
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Thanks to m4nu4l:
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
Click to expand...
Click to collapse
but how do i boot into recovery remove cache remove data/factory reset remove dalvik cache then flash the rom and flash the kernel??
please anyone help me..i've been stuck with this problem for about a week now..i lost my phone and when i found my old l7 it was the same condition and plus no wifi and bluetooth too..
Here you can get everything for your
CUBOT ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be aware!!!! check your version go to settings->about phone->build number.
1.3 stay here
v0.7 or lower!
v1.5!
v0.8 turbo
I am not responsible for anything that happens to your device.
Did you also flash the wrong rom or/and recovery on your cubot one?? I'm going to show you how to get unbricked! (Goto 2.b)
1.Recovery
Installing a Recovery:
a. you have still a working rom
- use Mobileuncle Tools and press flash recovery from sdcard. (see attachment for immage)
b. rom broken
power phone down, hold power+volume down. You should get a screen with chinese lettres, don't press anything
- grab MtkDroidTools
- attach your phone
- let it be recognized (adb drivers needed)
- klick "root, backup, recovery"
- klick allready prepared files
- klick recovery and boot button
- cancel rom selection
- select your recovery file
- klick yes
- klick yes to boot in recovery
- see your phone burning
C. Use sp flash tools(advanced)
Click to expand...
Click to collapse
2.Rom
A.custom rom
Make sure you have cwm. Go ahead and install a custom rom like discribed in the other forum. Then flash boot.zip and your done
You can flash any custom rom!!!!!
B broken rom
Go up and install cwm
Flash boot.zip(see attachment)
C. Difficult way (only if the two things above fail)
I won't hold your hand how to use sp Flash tools, but I will provide you with the image. This is untested (not even by myself). I made this backup with MTK droid tools and prepared the block for sp Flash tools. Do not flash "PRELOADER" and the "DSP_BL" without any reason. (So never!!)
here's the link to the files mediafire
Click to expand...
Click to collapse
3. I Have Lost my IMEI
A. Turn your phone, pull out the battery and you could read them
B.
view other forum for other way to do it
driver
adb driver link
legal Information:
I used some of information from http://forum.xda-developers.com/showpost.php?p=44784396/URL]. I would like to thank him.
Everything i or other users present here is free for use, but everything you do with your device can possibly destroy your device.
Neither i or anybody else than you is responsible when anything goes wrong when you apply any of the provided tools, firmware, scripts, recoveries, etc.
Changing any part (Hardware or Software) of your device can cause lost of warranty.
I give no support via PN. Post your Questions here.
Click to expand...
Click to collapse
I'm not a native English speaker. If there's any spelling/wordchoice/... mistake, feel free to say it. Any improvements are always welcome. I probally won't be frequent visiting my own post so help each other.
This thread is in Beta
Don't forget to hit thanks if I helped you! :good: (right below this post on the left)
http://forum.xda-developers.com/showpost.php?p=44784396&postcount=2
revesed
reversed
Jelly bean is nice and all, but....
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Click to expand...
Click to collapse
Yeah sure
danistuta said:
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Not yet but you can backup your phone with mtkdroidtools, flash recovery (generate also with mtkdroidtools), backup in cwm, flash custom rom, restore boot.img from backup , wip and reboot. Everything should be fine and in case of failure you can always revert back!!
Dave
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
danistuta said:
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Yeah but it is more dificult make a cwm backup(make sure it isn't corrupt), wipe everything, install rom, restore boot.img from back-up and it should work (and you can revert back in cade of!)
Good news for everyone with a newer Cubot, who is looking for the v1.5.
Today the guys from Cubot finally replied to my emails.
This is the link for the 1.5 firmware:
http://pan.baidu.com/s/1nt5E6b3?qq-pf-to=pcqq.temporaryc2c
For me it worked out very well, I rescued my Cubot with it.
But be aware that this the latest version of the firmware, propably for the newer Cubot One.
Is there already news on any new ports for our Cubots? I tried to flash the new MIUI V5, but it doesn't work with the new Cubot One. I just see a grey screen after installing it successful. Man I would kill a OMNIROM or Cyanogenmod...
Regards
rob
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU
Hi guys!
If you're having Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU read my post written here!
Cheers
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
drevel123 said:
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
Click to expand...
Click to collapse
Of course so I can make better recoveries (touch & twrp).
Can you share a link to file or a private massage?
Thanks in advance
@r0b
Have you tried to restore the stock v1.5 boot.img?
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Click to expand...
Click to collapse
there'q a diffrence!
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
drevel123 said:
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
Click to expand...
Click to collapse
yeah flash any 0.8 rom and than flash the boot.zip from the first post!
Thanks for the info! I was just a little worried, didn't want to break the phone.
y2imm said:
...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...
Click to expand...
Click to collapse
If the ROM is in a rar file, you can flash it via SP_Flash_Tool. You have to extract the rar, then probably use the following guide.
cool
thans
Hi Everyone,I Have Deodexed & Zipaligned Z3's 4.4.4 23.0.A.2.105 Firmware
This Was Meant For The Single Sim Of Xperia™ Z3 With The Model Number D6603 Or D6653
Requirements
Unlocked Bootloader Currently
Rooted
CWM Recovery
After The Root Will Work On Locked Bootloader,You Can Also Flash This On Your Z3 With Locked Bootloader
You Will Need To Have A Rooted ROM With CWM Recovery
You Must Be On This Firmware (.105) To Flash It
Please Note That The Zip Only Contained System App,Framework & Priv-App
It Was Recommended To Flash This Zip On A Generic Firmware That Doesn't Contain Carrier Apps
The Odex File Will Be Deleted During The Installation & The Carrier App May Not Work Properly Because This Is Based On Generic Firmware
Installation:
1.Download The Zip & Move It To Your Phone
2.Boot Into CWM Recovery & Flash It
3.Clear Cache & Dalvik Cache
4.Done
Download:
Deodexed & Zipaligned 4.4.4 23.0.A.2.93 Firmware ( 520.3 MB )
Deodexed & Zipaligned 4.4.4 23.0.A.2.105 Firmware ( 524.8 MB )
Credits:
laguCool
RyokoN
Hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I Helped You
@Ben Ling
would it be better if u could state which customization version u have de-odex from?
chunlianghere said:
@Ben Ling
would it be better if u could state which customization version u have de-odex from?
Click to expand...
Click to collapse
Generic UK
Btw there's is no any carrier apps in the zip & all Generic ROM have the same apk & jar files
It may be worthwhile to put that in the requirements it does not need an unlocked bootloader, only root and recovery. I know currently you cannot have either of these without an unlocked bootloader, but soon (Finger crossed) we will get root without having to unlock.
Greg
gregbradley said:
It may be worthwhile to put that in the requirements it does not need an unlocked bootloader, only root and recovery. I know currently you cannot have either of these without an unlocked bootloader, but soon (Finger crossed) we will get root without having to unlock.
Greg
Click to expand...
Click to collapse
yep I knew that but for now there is no way to root it on locked bootloader...
can you please get one for D6633
. .
Is it compatible with single SIM D6643 variant?!
Fatadxb said:
can you please get one for D6633
Click to expand...
Click to collapse
+1.
^^ a great opportunity to learn!! in the cross dev sony thread there is tool and instructions to convert ftf into deodexed flashable (I don't code but created these for Z Ultra) Ill go find the threads and post and you can easily make your own (ro save @Ben Ling doing exact same thing)
http://forum.xda-developers.com/showthread.php?t=2713329
[TOOL] Kamome tool for Windows - deodex tool for 4.4 KitKat
edit: sry, cannot find ftf conversion thread ~ from memory; unzip ftf, unpack system (the tricky bit, needs software), then kanome tool ~ will have to find proper instructions as this helps nobody lol
Sent from my D6653 using Tapatalk
Can this be installed with the TWRP recovery? Or do I need to have CWM recovery?
Im gonna open my bootlader and I am unsure on witch of the rooting alternatives I should use. Im used to TWRP from other phones, but I have also used CWM sometimes, aaaaaaah the choiches
Dirtyzecret said:
Can this be installed with the TWRP recovery? Or do I need to have CWM recovery?
Im gonna open my bootlader and I am unsure on witch of the rooting alternatives I should use. Im used to TWRP from other phones, but I have also used CWM sometimes, aaaaaaah the choiches
Click to expand...
Click to collapse
You can use the one you like
^^ if you use DoomLord cwm boot for root then flash AndroPlus kernel afterwards you actually end up with both cwm AND twrp (ftw)
Updated to .105
Hi,
I need help !! I own a D6603 Z3 model (with global generic firmware .93).
I unlocked the bootloader, then flash C.W.M recovery, then i flash this .105 de-odexed firmware, wipe cache and dalvik cache and finally, rebooting the phone.
But instead of the set up screen, i have a black screen with a blue line who shows up every 2 seconds at the bottom of the screen and i can't do anything !!
What am i missing ? I precise that i'm not a noob for flashing xperias phone.
P.S : I didn't make a backup before flashing cause i forgot, and flashtool doesn't works for Z3 yet so i can't flash any FTF Files.... :-/
flashtool works fine
gregou said:
Hi,
I need help !! I own a D6603 Z3 model (with global generic firmware .93).
I unlocked the bootloader, then flash C.W.M recovery, then i flash this .105 de-odexed firmware, wipe cache and dalvik cache and finally, rebooting the phone.
But instead of the set up screen, i have a black screen with a blue line who shows up every 2 seconds at the bottom of the screen and i can't do anything !!
What am i missing ? I precise that i'm not a noob for flashing xperias phone.
P.S : I didn't make a backup before flashing cause i forgot, and flashtool doesn't works for Z3 yet so i can't flash any FTF Files.... :-/
Click to expand...
Click to collapse
I guess you are not on .105 firmware to flash this.
I forgot to edit the OP as I just updated to .105 build,so there wrote that you must be on .93 firmware.
Actually you will need to be on the same firmware to flash it in case anything goes wrong.
For now you can only reflash firmware using flashtool.
Ben Ling said:
I guess you are not on .105 firmware to flash this.
I forgot to edit the OP as I just updated to .105 build,so there wrote that you must be on .93 firmware.
Actually you will need to be on the same firmware to flash it in case anything goes wrong.
For now you can only reflash firmware using flashtool.
Click to expand...
Click to collapse
Thanks a lot for your replies, i dowloaded the latest version of flashtool as i had an old version and i managed to get back to stock.
I unlocked again, rooted and that's good for me now, even if i'm still odexed.
Just hoping now that some devs will bring us some custom rom cause it's quite sad to own this amazing phone and have no custom rom to play with...
Thanks anyway for your work on this de-odexed rom !
totally agree
and stock is a blown up piece of ****
Alex3oe said:
totally agree
and stock is a blown up piece of ****
Click to expand...
Click to collapse
I'd rather be on Sony's stock firmware (which i like by the way) than Touchwizz rom !! But i like custom rom as i can modify whatever i want Also, something great would be to get some mods for camera (higher bitrate video for example) and mods for audio... Fingers crossed !