Hi,
I have update my Galaxy SII (GT-I9100) indian variant (INU) to official 4.1.2 update released through kies.
The update happened for only around 20 minutes and JB runs smooth and fast. I am impressed with the update Samsung has released.
But from the day one of JB update, my Galaxy SII needs charging for every 8 hours. It drains fast and I am frustrated now, coz I have to keep on check on the battery which is draining pretty. I am scared of to use this phone, as the battery is not predictable for longing at least for 10hrs. Previous 4.0.4 update used to give me more than 12 - 14 hours even there is use of more than average.
I searched through google, and every says about media process running. But could not find a solution. Can any please help me or direct me to find a solution on how to correct this.
Firmware: XWLSK
Thanks,
Kishore
Almost 1 in 3 people who have updated to JB have this issue.
A new firmware usually takes time to settle, and so will the battery life.
Have u done a factory reset after updating? This usually solves many issues.
There are many tips & tweaks for improving battery life on JB. Search the forum please.
"To err is human, to forgive is divine"
Sent from my SGS II
My S2 was bricked last week and I gave it to samsung service and they have changed the motherboard and delivered it to me by updating it to Jelly bean. Previously I was in ICS (Had No problem like these)
Now I have these problems:
1. whirring noise when turning on the camera (http://www.youtube.com/watch?v=toDlY8Txb4M) like this
2. ON every wake up ("SD card unexpectedly removed") Using 32 GB class 4 Sandisk memory card.
3. Battery drains fast ( this will get cleared in another few cycles of charging)
Please help me out...
Checked various place but dint get cleared...
Thanks in advance.
@felixpaul:
Sorry, but please do not create double posts. Your question will be answered soon enough.
I suggest you take it back to the Service Centre as they are obviously responsible for it.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Almost 1 in 3 people who have updated to JB have this issue.
A new firmware usually takes time to settle, and so will the battery life.
Have u done a factory reset after updating? This usually solves many issues.
There are many tips & tweaks for improving battery life on JB. Search the forum please.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks for the reply. The official firmware was released on April 3, and I updated through kies on April 4.
I learnt that the new updated ROM takes time to settle, but April 4 to till date is sufficient I guess to settle.
As mentioned by you, I dd not do a factory reset. do you want me to do a factory reset. I am not sure how to proceed with factory reset. I will to learn about it. Will the factory reset wipe all data and JB update?
Thank in advance.
Factory reset can be done by entering the Recovery mode. Just choose 'Wipe Data' and 'Wipe Cache Partition' and reboot.
U will not lose JB update, nor lose ur files, photos, videos, songs, downloaded content, documents etc.
But u will lose ur installed apps and their data, call history, contacts, calendar entries, messages, bookmarks, notes etc.
So backup what you can before doing a factory reset.
Also search for battery saving tips on XDA, like switching off Fast dormancy, etc.
"To err is human, to forgive is divine"
Sent from my SGS II
Will Wipe cause Brick issue
immortalneo said:
Factory reset can be done by entering the Recovery mode. Just choose 'Wipe Data' and 'Wipe Cache Partition' and reboot.
U will not lose JB update, nor lose ur files, photos, videos, songs, downloaded content, documents etc.
But u will lose ur installed apps and their data, call history, contacts, calendar entries, messages, bookmarks, notes etc.
So backup what you can before doing a factory reset.
Also search for battery saving tips on XDA, like switching off Fast dormancy, etc.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Is the Brick Bug issue fixed on the Indian Stock ROM.
praveenvj said:
Is the Brick Bug issue fixed on the Indian Stock ROM.
Click to expand...
Click to collapse
No risk of Brickbug on JB.
"To err is human, to forgive is divine"
Sent from my SGS II
Calm down mate, your battery will be normal after couple of days.
Just ignore it and keep fueling it.
Happened with me too.
According to me, the thing is
Jelly Bean creates cache files in its starting phase so i guess it leads to battery drain.
I am not sure though about my theory though.
Sent from my GT-I9100 using xda app-developers app
immortalneo said:
Factory reset can be done by entering the Recovery mode. Just choose 'Wipe Data' and 'Wipe Cache Partition' and reboot.
U will not lose JB update, nor lose ur files, photos, videos, songs, downloaded content, documents etc.
But u will lose ur installed apps and their data, call history, contacts, calendar entries, messages, bookmarks, notes etc.
So backup what you can before doing a factory reset.
Also search for battery saving tips on XDA, like switching off Fast dormancy, etc.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks a lot buddy. That solved the problem of JB battery drain.
By this factory reset, my phone is looking new and fast with JB smooth response. But only concern is all applications have to be re-installed.
After factory reset, I kept my phone in observation (3 days) and stock ROM to settle down (did not installed any app).
I can see the power management is normal now.
Any clue on how many hours of battery backup using JB stock ROM will give status of battery (in good condition or bad)?
Thanks once again.
Ur welcome!
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Related
Hello,
right now I have the following Galaxy S2:
Model: GT-I1900P
Android version: 4.0.3
Baseband version: I9100PXXLPB
Kernel:3.0.15-I9100PXXLPF-CL340191 [email protected]#3
Build number: IML74K.XXLPF
before that I was stock 4.0.4, after failed attempt to upgrade I installed this http://forum.xda-developers.com/showthread.php?t=1614895 ROM and during 1-st boot all apps was "optimising" for 1-2 minutes, but after boot every process is crashing and the phone is unresponsive (android.acore crashing every ~30sec).
Is there any way to fix this without losing all installed apps, settings, etc.
Have u done a factory reset before flashing?
"To err is human, to forgive is divine"
Sent from my SGS II
No, I didn't do Factory reset, like I said I hope not to lose all installed apps, settings, etc.
Sorry to say this, but that's the only logical thing to do. Flashing different ROM versions can cause all kinds of errors until a factory reset is done.
Backup what you can and do a full wipe.
"To err is human, to forgive is divine"
Sent from my SGS II
Was you on 4.0.4? Or 4.0.3 . What you on now?
i9100
alliance 7.2
v6.0b5
nekf2
I was 4.0.4, now I am 4.0.3
I installed lower version because I couldn't find 4.0.4 for my model.
He asked because 4.0.4 firmwares are prone to the eMMC Brickbug.
"To err is human, to forgive is divine"
Sent from my SGS II
Titanium back up pro + factory reset or reflash
HELL of a combination.
gastonw said:
Titanium back up pro + factory reset or reflash
HELL of a combination.
Click to expand...
Click to collapse
When I had an 'all apps crashing issue' with Jellybam, even TB would crash!
Fortunately, I had scheduled TB backups and hence lost nothing...
"To err is human, to forgive is divine"
Sent from my SGS II
But the big question here is: Why would you ever flash a custom rom without doing a factory reset?? It's one of the basic steps...
But hey, good luck with it
Sent from the Matrix
Cuz of 4.0.4 I think was the problem.
i9100
alliance 7.2
dorimanx 8.12
nekf2
Okay, but with a custom kernel everything should be safe to do, like doing a factory reset. But anyway, that's up to the OP.
Sent from the Matrix
True
i9100
alliance 7.2
dorimanx 8.12
nels1
TiBu doesn't recommend restoring apps after ROM change - especially if it's a different Android version. You can try to reinstall the .apks / market apps manually and then restore the old data, maybe it'll do it.
Sent from my digital submersible hovercraft.
yeah when installing / flashing a different rom its best to do a wipe / factory reset...if you also change android versions i would most certainly do a wipe / factory reset.
file changes...permissions...data access...media...possibly how apk's are stored/ used/ accessed. and so on.
Now a dirty flash is possibly ok...... if same android version and same rom. IE just updated version.... but even then you can have issues.
If your apps n stuff are important.... try a backup program..... titanium backup, my backup pro....etc.
But as mentioned if you change roms and specifically change android versions some backs ups may not fully function or will only restore partially.
cheers
Hi! I'm having weird problems with my phone. Useally, when I'm having a call or just trying to unlock the lockscreen, phone just shuts down. Also sometimes phone loses signal and even shows that it's charging even if it's not. I'm using Disaster rom 10. My kernel is Dorimanx, because I need stwaks to lower defaut headphone volume.
What could be causing these issues?
Thanks for any help.
Buggy rom could be reason. Backup ur data first.
Wipe cache, dalvik cache and fix permissions first.
If that doesn't work, try a full wipe.
If that doesn't work, re-flash ur rom.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Buggy rom could be reason. Backup ur data first.
Wipe cache, dalvik cache and fix permissions first.
If that doesn't work, try a full wipe.
If that doesn't work, re-flash ur rom.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks for quick reply! I'll try those and if it doesn't help I will maybe change rom.
Lemon200 said:
Thanks for quick reply! I'll try those and if it doesn't help I will maybe change rom.
Click to expand...
Click to collapse
Good..
Do let us know what happens!
"To err is human, to forgive is divine"
Sent from my SGS II
I've got an issue with my i9100 running the latest version of ParanoidAndroid (3.15, on JB 4.2.2). I think this is most likely a question for the Dev forums, but I can't post there yet, so here I go.
I've wiped my phone several times, reinstalled several version of the image, along with several versions of gapps, but whenever when the phone reboots it's missing play, gmail and several others. I've managed to download and install play separately, but whenever I open it, it closes immediately.
Any ideas?
Do not flash several versions of GApps. Only flash the correct version (to kmow which version to use, check the PA thread).
"To err is human, to forgive is divine"
Sent from my SGS II
DComrie said:
I've got an issue with my i9100 running the latest version of ParanoidAndroid (3.15, on JB 4.2.2). I think this is most likely a question for the Dev forums, but I can't post there yet, so here I go.
I've wiped my phone several times, reinstalled several version of the image, along with several versions of gapps, but whenever when the phone reboots it's missing play, gmail and several others. I've managed to download and install play separately, but whenever I open it, it closes immediately.
Any ideas?
Click to expand...
Click to collapse
Play doesn't work independently, it's dependent on certain other Google services which gets automatically installed when you flash gapps and the issue with the loss of gapps on reboot you better ask there, must be a bug as 4.2.2 is still far from being perfect.
Sent from my GT-P6200 using xda app-developers app
Thanks for the answers guys. Looks like it was the state of my phone. I wiped it using Odin and a stock 4.1.2 ROM, partitioning when I did so, then tried PA again and it all came back!
DComrie said:
Thanks for the answers guys. Looks like it was the state of my phone. I wiped it using Odin and a stock 4.1.2 ROM, partitioning when I did so, then tried PA again and it all came back!
Click to expand...
Click to collapse
Glad to hear that!
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Hi peeps, updated my wifes S2 with an official samsung update. OTA would not work so i resorted to using Kies (which appeared to run well and completed with a reboot.The phone seemed OK at first but then the gallery/music player kept force closing and the camera would do the same. After a few reboots it continued to decline in stability until it just stopped booting at all. I have tried a hard reset but with no luck ( little android fella shows up then loops back to galaxy splash screen. I can boot into odin mode but i would prefer the Samsung Jelly bean Rom. can anyone tell me if i can flash this from Odin as this appears to be the only way to get it up and running again. Any helps good help Cheers.
U already have the answer mate!
Download the JB firmware you want from sammobile.com.
Get into Download mode.
Flash it via Odin.
Get into recovery.
Do a factory reset and wipe cache too.
Reboot.
"To err is human, to forgive is divine"
Sent from my SGS II
Sorry to be a pain in the ass but I went ahead and tried it through odin and all seemed well until the reboot and then it looped back onto the s2 splash screen again. Seems odd after it seemed Ok. Any ideas What's going wrong? Thanks again.
Sent from my GT-I9300 using Tapatalk
stigslim said:
Sorry to be a pain in the ass but I went ahead and tried it through odin and all seemed well until the reboot and then it looped back onto the s2 splash screen again. Seems odd after it seemed Ok. Any ideas What's going wrong? Thanks again.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thats ok.
Enter recovery and do a factory reset and wipe cache.
BTW, which stock rom did u flash?
"To err is human, to forgive is divine"
Sent from my SGS II
Neo, if he flashed 4.0.4...........
Sent from the little guy
gastonw said:
Neo, if he flashed 4.0.4...........
Sent from the little guy
Click to expand...
Click to collapse
I did think of that. That's why I asked after suggesting a reset. Guess I will ask first, then suggest next time.
"To err is human, to forgive is divine"
Sent from my SGS II
y.o.u.w.i.l.l.h.a.v.e.n.i.g.h.t.m.e.r.s
Sent from the little guy
Hello,
I have "played" arround with my phone trying different ROM's during a couple of years now.
Now i want to try the Omnirom but kep getting error 7 when i try to flash.
The soluton for this is updating CWM.
The strange thing is that i seem to have two versions of CWM, the standard interface and Phyliz Touch 5. They both seems to be a different version of CWM.
Now i clearly need to clean things, but i am not sure where to start.
What would be the best way to make my phone ready for the Omnirom and get one CWM?
ps. i did some googling but there is so much information out there that i get confused what the right way to go is.
Cheers,
Francis
Huh?? Two recoveries?
How did you do that? Or are you using ROM Manager?
"To err is human, to forgive is divine."
Sent from my SGS II
Well sometimes its starts in phyliz touch recovery and sometimes in de normal CWM recovery.
Sent from my GT-I9100 using xda app-developers app
Philz touch is a modified CWM recovery mate. But I still don't understand how you can do that.
"To err is human, to forgive is divine."
Sent from my SGS II