hey guys. I would want to install Android on a Samsung S5380 Wave Y that runs with Bada in the present if could be possible. It's a smarthphone but i don't really like bada and i would want to install android on it, but i can't really find a tutorial how to do it. Did someone done this task, it is possible? Thank you
sergiulik said:
hey guys. I would want to install Android on a Samsung S5380 Wave Y that runs with Bada in the present if could be possible. It's a smarthphone but i don't really like bada and i would want to install android on it, but i can't really find a tutorial how to do it. Did someone done this task, it is possible? Thank you
Click to expand...
Click to collapse
No, you can't because it designed to run bada and you need to make android rom yourself for your phone, which is not possible as it requires high technical knowledge like compiling a rom, compiling kernel for your device using source of another device! You should have good knowledge of soldering pins or wires to flash boot loader on main board by opening the phone! The results may not be guaranteed, you might also brick your cellphone.
Sent from my LG-P500 using xda app-developers app
ayazm.140895 said:
No, you can't because it designed to run bada and you need to make android rom yourself for your phone, which is not possible as it requires high technical knowledge like compiling a rom, compiling kernel for your device using source of another device! You should have good knowledge of soldering pins or wires to flash boot loader on main board by opening the phone! The results may not be guaranteed, you might also brick your cellphone.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
thanks for the answer.
I saw Samsung galaxy pocket s5300 is basically the same phone as wave y and it runs android 2.3. Is it possible to use the firmware for that s5300 on wave y?
well its possible....
sergiulik said:
hey guys. I would want to install Android on a Samsung S5380 Wave Y that runs with Bada in the present if could be possible. It's a smarthphone but i don't really like bada and i would want to install android on it, but i can't really find a tutorial how to do it. Did someone done this task, it is possible? Thank you
Click to expand...
Click to collapse
i have seen posts abt porting android to bada devices....follow the below links ...it may help
Installing android on wave.
http://www.mysamsungwave.com/index.php?topic=9523.0
Performance of android on wave.
http://www.badaforums.net/forums/android-porting/wave-performance-after-porting-android-t4221.html
Try it on your own risk...m just provinding u the links...
Pls keep in mind that before posting any threads do some research.....coz most of your questions have been answered.
follow below xda links.....
http://www.xda-developers.com/tag/samsung-wave/
Do not forget to thank if it helps.
i compare wave y and gio it seems to be very similar even their a lot spesifications same. can i install on this phone gio firmware using odin. if this won't work can i bring my phone back. i don't wanna make it brick. What can i do?
parduscu said:
i compare wave y and gio it seems to be very similar even their a lot spesifications same. can i install on this phone gio firmware using odin. if this won't work can i bring my phone back. i don't wanna make it brick. What can i do?
Click to expand...
Click to collapse
If you using the correct firmware im pretty sure you can give a try without bricking your phone..
zulh said:
If you using the correct firmware im pretty sure you can give a try without bricking your phone..
Click to expand...
Click to collapse
i want to install gio firmware on my wave y. thats why i'm afraid of brick my phone
If you flashing others firmware to diffrent phone model im pretty sure you will brick your phone.
Sent from my Nexus 4 using Tapatalk
Maverick029 said:
i have seen posts abt porting android to bada devices....follow the below links ...it may help
Installing android on wave.
http://www.mysamsungwave.com/index.php?topic=9523.0
Performance of android on wave.
http://www.badaforums.net/forums/android-porting/wave-performance-after-porting-android-t4221.html
Try it on your own risk...m just provinding u the links...
Pls keep in mind that before posting any threads do some research.....coz most of your questions have been answered.
follow below xda links.....
http://www.xda-developers.com/tag/samsung-wave/
Do not forget to thank if it helps.
Click to expand...
Click to collapse
This link are correct??
Related
can somebody develop a clean custom rom for samsung galaxy ace .I have tried using villain rom .but it doesn't have any good features of a custom rom.please somebody post a rom that allows to increase the processor speed and nandroid backup
Sent from my GT-S5830 using XDA App
hallowen said:
rom that allows to increase the processor
Click to expand...
Click to collapse
read specification for our processor and you'll see that it already overclocked at the factory.
i've heard from one of my friend that the processor was factory overclocked.but a custom rom will improve the performance.i tried using villain rom .it was having too much of bugs..i shifted back to kp8....its really good.....no bugs nothing.......
Try using KPE, less buggy tnah KP8.
Lovetz said:
read specification for our processor and you'll see that it already overclocked at the factory.
Click to expand...
Click to collapse
I read somewhere that the processor of sga is the turbo version of the 600mhz variant. Contrary to many assumptions it is not factory overclocked. The post is somewhere in the sga thread.
The processor runs at 800 MHz, 600 is the speed of the non-turbo version.
hallowen said:
can somebody develop a clean custom rom for samsung galaxy ace .I have tried using villain rom .but it doesn't have any good features of a custom rom.please somebody post a rom that allows to increase the processor speed and nandroid backup
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
The first release of villain rom is just a base package that nprussell will work on.
Sent from my GT-S5830 using Tapatalk
villemann said:
Try using KPE, less buggy tnah KP8.
Click to expand...
Click to collapse
hey do you have problems like copying file from computer to sd card?
hey guys, im a having serious headache here.
few days ago i changed my sd card from 2GB to 4GB and i flashed my phone to the lastest firmware (S5830XXKPE) and rooted it.
i connected my phone to the computer via usb to copy songs and some files into my sd card. however it hangs and become unresponsive while transfering files into sd card. and so i cant copy files from computer into my sd card! well, i did try by using micro sd card reader, the copy process goes smoothly BUT when i put in the sd card back to my phone, it shows nothing in it!! as if i dint copy anything!!
HELPPPPPPP !! is it the SD card problem or the firmware problem ?? i guess it is not the firmware problem since i have been browsing through so many threads from various forum and couldnt find anything related about this. any ideas about this problem ???
@ShenJie
Did you format your new SD card into the phone..?
Where do I have to start with this?
I made a decision and will buy myselve a Galaxy Ace next week..
A custom ROM would be nice. If there's anyone with support, feel free to pm me so we can start doing this
What other ROMS and themes are compatible with the S5830?
MuayThaiFighter8 said:
Where do I have to start with this?
I made a decision and will buy myselve a Galaxy Ace next week..
A custom ROM would be nice. If there's anyone with support, feel free to pm me so we can start doing this
What other ROMS and themes are compatible with the S5830?
Click to expand...
Click to collapse
Are going to develop a custom rom soon???
Ya there are sme good talented dev for Ace...... Collabrate with them to make on if u are planning to do so!!!!!!!!!
MuayThaiFighter8 said:
Where do I have to start with this?
I made a decision and will buy myselve a Galaxy Ace next week..
A custom ROM would be nice. If there's anyone with support, feel free to pm me so we can start doing this
What other ROMS and themes are compatible with the S5830?
Click to expand...
Click to collapse
Seriously, after months of desperation SGA is growing ... thanks to devs like you!
Well.. I'm not a full dev. But I'm sure I can pull something very stable out of it. The phone deserves it. Will get to work soon..
MuayThaiFighter8 said:
Well.. I'm not a full dev. But I'm sure I can pull something very stable out of it. The phone deserves it. Will get to work soon..
Click to expand...
Click to collapse
I hope you can work with dee000000 who is working on a cyanogenmod port. At first it is not stable but as development goes further until it becomes stable it will be a nice custom rom. Well this is just an idea
Sent from my GT-S5830 using Tapatalk
MuayThaiFighter8 said:
Well.. I'm not a full dev. But I'm sure I can pull something very stable out of it. The phone deserves it. Will get to work soon..
Click to expand...
Click to collapse
yosh, i can't wait for your rom mate
@MuayThaiFighter8
If you can port CWM recovery that will be great !! There is a dev ( dee000000) who is waiting just for that to port CM7 to Ace.
Thanks for taking interest in Ace development !!
Alright thanks guys.. I'll take contact soon, once I have the phone..
Help..
hi . I'm newbie in rooting my samsung ace. Please help on how to install custom rom in my samsung ace. my unit was already rooted. i need rom which makes battery stays longer. please advice. thank you.
kcperlas said:
hi . I'm newbie in rooting my samsung ace. Please help on how to install custom rom in my samsung ace. my unit was already rooted. i need rom which makes battery stays longer. please advice. thank you.
Click to expand...
Click to collapse
The hell ? Reviving old threads for a noob question ?
Herpderp Defy.
Guys... I had founded this application to create a rom for our SGA.
===
Android Kitchen, v0.179
that was posted by dsixda
===
Does this work to create a new rom for our SGA
urnamu said:
Guys... I had founded this application to create a rom for our SGA.
===
Android Kitchen, v0.179
that was posted by dsixda
===
Does this work to create a new rom for our SGA
Click to expand...
Click to collapse
u may want to try..
Jun Hong said:
u may want to try..
Click to expand...
Click to collapse
Yes... I may try it... but I'm very afraid to Brick my phone....
Thats the reason why I'm asking some question.
I had tried earlier... But it didn't work... Now it supports galaxy s.... So you can give it a try now...
adiles said:
I had tried earlier... But it didn't work... Now it supports galaxy s.... So you can give it a try now...
Click to expand...
Click to collapse
Did it brick your phone?? or not?
I don't mean to offend, but if you honestly worry that much about "will it brick your phone" over BUILDING a rom I guess you either don't know what a rom is, or won't have the skills to make one. No developer hasn't bricked a phone before, it's not as if it's hard to bring it back to life.
consegregate said:
I don't mean to offend, but if you honestly worry that much about "will it brick your phone" over BUILDING a rom I guess you either don't know what a rom is, or won't have the skills to make one. No developer hasn't bricked a phone before, it's not as if it's hard to bring it back to life.
Click to expand...
Click to collapse
Ohhhh Android Kitchen ? I wanna try ! (And we can fufil fla.sh's dream of a HTC Sensed Galaxy Ace XD)
Sent from my MSM7227 with Adreno 200 using XDA App
yes some of its build component worked for ace. thats the one and only tool i use to deodex when other tool gave much headache. deodex and unpack/repack bootimage works. what does not works is building flashable zip file from it, gave error "0" in recovery. also somewhat agree with consegregate. if u that worried about bricking ur device, dont even bother to think about cooking roms.
Hello guys.
I saw at software development there is a way to port rom to rom, but the devices need to be in the same resolution.
Thread: http://forum.xda-developers.com/showthread.php?t=1908008
For the galaxy ace plus wich device is the good, and wich rom?
Is it possible?
Thx for answers and sry for my english
adanis said:
Hello guys.
I saw at software development there is a way to port rom to rom, but the devices need to be in the same resolution.
Thread: http://forum.xda-developers.com/showthread.php?t=1908008
For the galaxy ace plus wich device is the good, and wich rom?
Is it possible?
Thx for answers and sry for my english
Click to expand...
Click to collapse
someone?
resoultion is one of the factors and not the main one....
for porting a rom atleast the easy way both the phones must be of same soc and simlar harware proccessor variant etc bro....
speed_bot said:
resoultion is one of the factors and not the main one....
for porting a rom atleast the easy way both the phones must be of same soc and simlar harware proccessor variant etc bro....
Click to expand...
Click to collapse
Then the easy way is impossible for me. Betw thx for the answer.
why don't you develop your own rom there are all the resources out there that you need just make good use of them .... instead of saying press the button instead that way it counts
speed_bot said:
why don't you develop your own rom there are all the resources out there that you need just make good use of them .... instead of saying press the button instead that way it counts
Click to expand...
Click to collapse
Good idea... I need to learn alot, but here i can find the complete way...
though there isn't a guide specific guide for your forum look for some Sammy's guides they will have something in common
speed_bot said:
though there isn't a guide specific guide for your forum look for some Sammy's guides they will have something in common
Click to expand...
Click to collapse
Yea, i saw here at forum don't have for my samsung. :/ I have to wait for jelly bean i guess...
Currently im trying to give life to my bricked x10i...
ace plus will get official jelly bean but it's gonna be a long wait btw you guys have a forum right for ace plus
So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
gogozx said:
So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
Click to expand...
Click to collapse
does this offer still stand?
If so, I will give it a go.
OpenMinded said:
does this offer still stand?
If so, I will give it a go.
Click to expand...
Click to collapse
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
gogozx said:
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
Click to expand...
Click to collapse
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
OpenMinded said:
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
Click to expand...
Click to collapse
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
gogozx said:
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
Click to expand...
Click to collapse
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
OpenMinded said:
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
Click to expand...
Click to collapse
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
gogozx said:
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
Click to expand...
Click to collapse
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
OpenMinded said:
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
Click to expand...
Click to collapse
I will be testing those ROMs that you make for N9389, is it OK?
gogozx said:
I will be testing those ROMs that you make for N9389, is it OK?
Click to expand...
Click to collapse
If I manage to make something working, sure !
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
i compiled my first recovery based on cm 10.1 for Thl W8.
I have no easy way to push the image to the phone to test.
If it works, I can start to create a recovery for this phone based on sources.
I would need that info I requested.
Are you able to post the build.prop file and the partition dump?
Look at the page with instructions I posted earlier.
Meantime I look for an easy way to flash that recovery, somehow sp flashtool does not read the scatter file created by mtkdroidtools .
cheers
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
OpenMinded said:
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
Click to expand...
Click to collapse
Even if you failed, thank you for trying and i hope you will make it
gogozx said:
Even if you failed, thank you for trying and i hope you will make it
Click to expand...
Click to collapse
you are welcome .
I do still need the information I mentioned once I get it working.
Especially the partition info is important.
You may always hit the thanks button when you are happy .
I am currently working on CWM 6 to get working.
I'll post when I have progress (or when I quit ).
You can always give it a go yourself:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
cheers!
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
So, like I requested before, please :
- post your build.prop file
- post identification stuff of the device, like screen resolution, memory and recovery.fstab (or the recovery image)
- in general take a look at the link I posted before and read it, so you know what info is needed :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
The reason I ask is because there are at leat 2 different versions, 1 had 960x480 screen and 1/4gb ram/rom, the other 1280x720 and 2/8.
They obviously at least have different partitions and displays and perhaps even other different hardware.
You can also post a full working ROM on dropbox or something.
thanks
P.S. for the needed tools, see here:
http://forum.xda-developers.com/showpost.php?p=44096751&postcount=371
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
OpenMinded said:
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
Click to expand...
Click to collapse
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
gogozx said:
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
Click to expand...
Click to collapse
You have CWM 6 already? If you are sure, I will continue.
OpenMinded said:
You have CWM 6 already? If you are sure, I will continue.
Click to expand...
Click to collapse
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
gogozx said:
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
Click to expand...
Click to collapse
Hi,
Well I am partly motivated by your offer, but I enjoy Android and Linux hacking.
Let's hope those attempts will lead to something.
How about LewaOS? There are good porting guides for that.
I will try to look for MIUI or CM in the weekend.
Initial CM would miss dual sim support.
Maybe MIUI is easier, because some work has been done.
Well, I'll see.
Don't overestimate the complexity, if you have CM 6 and made it yourself, porting a rom is doable I suppose ?
cheers
Is there a better version of the Tizen Porting Guide than the wiki ones? I've been able to build Tizen images for the reference device-210 using the guide at source.tizen.org, but I would like to port tizen to other devices (specifically the Samsung Galaxy Star Pro S7262). Honestly the wiki guide just makes my head spin. I don't mind if it is technical, but I would like it easier to navigate.
Thanks,
Qiangong2
Please, can you explain more...
1.
Link to Porting guides you have found on wiki...
Please...
You mean this?
https://wiki.tizen.org/wiki/Porting_Guide
2.
Samsung Galaxy Star Pro S7262
My Google search shows it runs Android...
Thanx in advance.
Best Regards
adfree said:
Please, can you explain more...
1.
Link to Porting guides you have found on wiki...
Please...
You mean this?
https://wiki.tizen.org/wiki/Porting_Guide
2.
Samsung Galaxy Star Pro S7262
My Google search shows it runs Android...
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
Yeah I mean that one. I want to port Tizen so that it will run on the S7262.
Sent from my SGH-M919 using XDA Free mobile app
Is S7262 not secured?
To prevent running other OS Kernel?
I mean you have more then the idea/dream?
I am asking so stupid... because for instance for Retail GT-I9300 it is impossible...
And RD-PQ is 1:1 same Hardware... as GT-I9300...
Inclusive funny Display + Touch...
Best Regards
adfree said:
Is S7262 not secured?
To prevent running other OS Kernel?
I mean you have more then the idea/dream?
I am asking so stupid... because for instance for Retail GT-I9300 it is impossible...
And RD-PQ is 1:1 same Hardware... as GT-I9300...
Inclusive funny Display + Touch...
Best Regards
Click to expand...
Click to collapse
As long as you root it and install a custom recovery, you can do what you want with it. You can do the same with the GT-I9300, you just probably need to port it from source. It is a dream, but it is a viable dream Tizen has the same Mer base as Sailfish OS and Meego have and both of those can be ported
Sent from my SGH-M919 using XDA Free mobile app
As long as you root it and install a custom recovery, you can do what you want with it.
Click to expand...
Click to collapse
Okidoki.
You mean this is the reason why so many Tizen ports exists on Bootloader protected Samsung devices.
Anyway.
Good luck... nothing is impossible.
Please inform us, if you have success.
Best Regards