Related
Hi thanks for looking.
I'm a new register and newbie to rooting. And I'm currently following
[ROOT ICS L9 GUIDE] Root ICS with New Lelus method & Offline Flash [11-Mar] guide.
http://forum.xda-developers.com/showthread.php?t=2173465
Unfortunately, I'm a new user register so I can't post on that message thread. So, I was instructed to post my question here.
So, I'm following the guide word-for-word from steps 0 - 8 and now I'm up to the part where it says to "When done, REMOVE USB CABLE AND POWER OFF THE PHONE."
Okay, now question:
[Q]1: For step 9a and 9b. When do I actually perform these steps:
So, currently my USB cable is removed and the L9 is power off from the above step in STEP8.
9A. says to Add lines in "hosts" file as mentioned in step 1 of this post.
So, I'm going to assume that I add the Hex-Edited BIN file and related KDZ file that I've downloaded in STEP1.
But where do I add said lines to?
[Q]2: okay so for step 9b. Start "SmallServer" as mentioned in step 2 of same post.
Where is this "SmallServer?"
In step 2 of the same post, I've already Downloaded Root_and_Flash_Guide_byCMahendra(date).zip file (attached with this post) and extract in your C-Drive.
and gotten three folders named "C:\RootLelus" and "C:\RootFlash" and "C:\shttps"
[Q]3. Okay, now that I'm just advance reading to STEP10 that asks to follow Steps 3-10. Does that mean now I have to reconnect my phone back to the PC from STEP8 and go through the steps 3-10 again, since I've already gone through it the first time around.
[Q]4. the Actual Magic.
So, which LG UPDATE TOOL is the step 11 referring to? Is this when I'm installing the driver to my PC in Step 3? Or is said LG UPDATE TOOL sometime during step 4-8?
Sorry, for all the confusing NEWBIE questions. I'm just trying to follow all the steps without bricking my new phone.
Thank you in advance for your patience and assistance.
-Peter Wong
[Q]1:
It says follow "step 1 of this post" ; Those words are actually a link to a second thread which is this one:
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
[Q]2:
See above link in Q[1]
[Q]3:
Please read the link in Q[1] and then ask the question again if still don't understand
[Q]4:
Same response as in Q[3]
Protomartyr said:
[Q]1:
It says follow "step 1 of this post" ; Those words are actually a link to a second thread which is this one:
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
[Q]2:
See above link in Q[1]
[Q]3:
Please read the link in Q[1] and then ask the question again if still don't understand
[Q]4:
Same response as in Q[3]
Click to expand...
Click to collapse
OMGaawwdd, I'm such an idiot, I totally didn't click on that link. Thank you very much.
No problem!
OKay, sorry... another question.
So, I'm now flashing with the PHONE UPDATE TOOL and after going through all the steps and the 'MAGIC' swap. My phone reboots and when it turns on I get an error message:
[Driver Software Installatior
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
OMAP4430 Device unplugged]
Please let me know what I did wrong and at which point in the process do I need to repeat all the steps again to root my phone.
Do I go back and use the [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
And start with STEP7 and rerun the PHONE UPDATE TOOL and MAGIC swap?
Thanks in advance.
Hmm I remember getting a driver installation error when trying to put the phone into 'software upgrade mode'. In my case, I held the 'volume up' button down and plugged the USB cable into the phone. Then I got the error notification that the OMAP driver didn't install. Yet right after this, another set of drivers installed (I'm guessing the computer took a minute to recognize the different mode of the phone?). These new set of drivers installed successfully and I was able to root with no problems.
tl;dr I disregarded the OMAP error, and rooted just fine with no problems
Have you checked if you got root after flashing? If you do have root, then you should be fine.
Protomartyr said:
Hmm I remember getting a driver installation error when trying to put the phone into 'software upgrade mode'. In my case, I held the 'volume up' button down and plugged the USB cable into the phone. Then I got the error notification that the OMAP driver didn't install. Yet right after this, another set of drivers installed (I'm guessing the computer took a minute to recognize the different mode of the phone?). These new set of drivers installed successfully and I was able to root with no problems.
tl;dr I disregarded the OMAP error, and rooted just fine with no problems
Have you checked if you got root after flashing? If you do have root, then you should be fine.
Click to expand...
Click to collapse
Protomartyr,
Ohhh..so that error message isn't the cause of my phone not being able to successfully root, huh? No, my phone still isn't rooted. Basically when my L9 is successfully rooted is when all default icons on my phone are gone right?
So, a couple new questions then.
[Q]1: Okay, I know when it's time to flash you have to hold down the volume button and then plug in the USB cable into the phone. How long do you hold the volume button down? I hold the button down until the phone turns out with the S/W flashing message and then I let go. Do, I need to hold down the button throughout the whole flashing process?
[Q]2: How can you tell if the phone is rooted? Does it look different?
I'm guessing my phone is still haven't been rooted and I'm only getting this error message.
[Driver Software Installatior
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
OMAP4430 Device unplugged]
So, if the above error message isn't the cause of my failed rooting. At which step do I go back and reattempt to root my phone?
Do I go back and use the [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
http://forum.xda-developers.com/show...86&postcount=1
And start with STEP7 and rerun the PHONE UPDATE TOOL and MAGIC swap?
You wouldn't see a difference once you rooted right off the bat. You should see the SuperSU app in your apps list if you followed the procedure. However, having the SuperSU app doesn't mean you are rooted (SuperSU binaries must be installed as well and this requires super user privileges).
To check if you have rooted successfully, the best way is to just download 'Root Checker' here (Click Me for Link)
Once you install Root Checker and open it, you should see a notification asking for Root Checker to get super user privileges. Accept the notification and you should see 'Root successful' or something along those lines.
Let me know if Root Checker says 'successful' or not, and maybe we can troubleshoot after that?
Protomartyr said:
You wouldn't see a difference once you rooted right off the bat. You should see the SuperSU app in your apps list if you followed the procedure. However, having the SuperSU app doesn't mean you are rooted (SuperSU binaries must be installed as well and this requires super user privileges).
To check if you have rooted successfully, the best way is to just download 'Root Checker' here (Click Me for Link)
Once you install Root Checker and open it, you should see a notification asking for Root Checker to get super user privileges. Accept the notification and you should see 'Root successful' or something along those lines.
Let me know if Root Checker says 'successful' or not, and maybe we can troubleshoot after that?
Click to expand...
Click to collapse
Hey Protomartyr,
Cool, my phone installed SuperSU in my apps menu and Root Checker says my phone has been rooted. Now I just need a guide or info on how to remove the bloatware and what I can do with my rooted phone. Thanks for all your assistance and guidance.
peter wong said:
Hey Protomartyr,
Cool, my phone installed SuperSU in my apps menu and Root Checker says my phone has been rooted. Now I just need a guide or info on how to remove the bloatware and what I can do with my rooted phone. Thanks for all your assistance and guidance.
Click to expand...
Click to collapse
No problem. Congrats on getting root :highfive:
As far as removing bloatware safely is concerned, you might have to ask someone else (I'm still a newbie at these things). You can remove/disable them using Titanium Backup (from the app store). Proceed with caution though, as you don't want to remove an app that the phone needs to function. From what I hear, it's safer to just disable unneeded apps (though even then you must tread carefully). Titanium Backup is also useful for backing up all your apps/system apps/user data.
As far as what you can do with root...well that's like asking how many drops of water are in the ocean You can fully customize your phone and even install a new ROM; just naming a few. You can get a better picture of what people are doing with their phones in this thread [Click Me] as well as the other LG L9 threads.
Enjoy!
Lg Optimus L9 p76910g 4.0.4
I want too know if the T-mobile lg optimus L9 can be rooted my specific device is in the picture attached i read through the forum and could not understand if there was a for sure way to do so. I have rooted and flashed my LG optimus net from net 10 To arearom Q So following instructions on how to root my exact device would help alot if anyone could direct me too another thread.
Thanks,
Domonick5150 said:
I want too know if the T-mobile lg optimus L9 can be rooted my specific device is in the picture attached i read through the forum and could not understand if there was a for sure way to do so. I have rooted and flashed my LG optimus net from net 10 To arearom Q So following instructions on how to root my exact device would help alot if anyone could direct me too another thread.
Thanks,
Click to expand...
Click to collapse
According to your screenshot, you have the P769 running firmware 10g
You can root this device using the method described in this thread.
Thanks again for everything Protomartyr,
You've been really helpful. Okay, another question. So, now that I've rooted my phone. Do I now go back and turn on the Lookout Security Antivirus, that I've had to turn off during the rooting process steps? Or would I need to allows need to leave it off to keep my root active?
peter wong said:
Thanks again for everything Protomartyr,
You've been really helpful. Okay, another question. So, now that I've rooted my phone. Do I now go back and turn on the Lookout Security Antivirus, that I've had to turn off during the rooting process steps? Or would I need to allows need to leave it off to keep my root active?
Click to expand...
Click to collapse
You can re-enable Lookout after you root.
one more question
Do you believe that this will be the only rooting method released?
Domonick5150 said:
Do you believe that this will be the only rooting method released?
Click to expand...
Click to collapse
As far as I know, this is the only method available at the moment; but I'm a newbie so don't take my word as the golden truth
thanks
Well you helped me out it's just i read tgat thread & it said 10 g india version with USA t-mobile un-tested So idk.
Domonick5150 said:
Well you helped me out it's just i read tgat thread & it said 10 g india version with USA t-mobile un-tested So idk.
Click to expand...
Click to collapse
Could you point out exactly where it said this? I re-read the thread and couldn't find it.
After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip
i have been seeing a lot of threads about rooting this phone, but, they all have windows scripts, even the thread that is said to have a runme.sh does not have it in any of the links that i unzipped - only a runme.bat, but yet, people keep mentioning a runme.sh in it... also, i really don't see any one lying out the steps for doing this with linux.
i'm a noob, and dont really know much about this stuff, but i've done this ONCE before with a galxy exhibit, but it was very easy, i just copied a file to the phone (stock rom?), rebooted into recovery, told it to recover from that file, and i was done.
i have no idea how to do it with my new phone, and so i'm wondering:
1: where can i find the files i need to do this with linux - i just want root, nothing special
2: where can i find the steps necessary to do it - in the easiest manner possible?
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
any help is appreciated.
sentientsystem said:
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
Click to expand...
Click to collapse
Your phone is running ICS 4.0, that is the version which it shipped with. Pretty much everyone on here has upgraded to JB either with software update on the phone or they have manually updated with the offline KDZ flash method.
I dont have any experience in linux so I cant help. I hope you can get your phone rooted!
Sent from my LG-P768 using xda app-developers app
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
sentientsystem said:
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
Click to expand...
Click to collapse
You would need wine and then set it up...
Sent From My Xperia Themed P769
well, i tried that "LGpwn" and it didn't work, as well as a fake lg-recovery app. i figured out that i've got a "10g" phone (P769 V10G ICS). i'm not sure what the next step is. some one mentioned downgrading to JB... is there some where you can point me to for that???
i've GOT to get this t-mobile junk off my damned phone... i've even TRIED to install cyenogenmod, but i can't figure out how to get my phone to go into recovery mode (NOT factory rest) - i've tried volup+power+home and volup+power, and neither seem to be working.
Setup a sandbox, windows xp. LG uses windows, no other way to root as of right now for the t-mobile version.
Sent from my LGMS769 using xda app-developers app
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrade to a samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
sentientsystem said:
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrad to an samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
Click to expand...
Click to collapse
Option #1
If you are rooted on stock T-Mobile 10e or 10g ROM and have the CWM installed from this thread:http://forum.xda-developers.com/showthread.php?t=2095825 follow my instructions.
Place one of these CWM ROM images on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2136204
Place this JB radio firmware from T-Mobile 20d ROM on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2256350
Power off the device.
After power on the back/menu capacitive buttons will flash repetedly. Press Volume down while the lights are flashing and the phone should go into recovery.
Flash the ROM first.
Flash the radio second.
Reboot.
***Notes***
1.) 20d is the latest T-Mobile, 21b is the latest Wind Mobile. Both work.
2.) 21b is lighter/faster but has no wifi-calling.
3.) 21b will require you to manually enter your APN settings for cellular data and MMS. Be sure to write down your APN settings before flashing this ROM.
4.) Some users say battery life sucks on JB. I notice that 21b is better on battery life than 20d.
Option #2.
In Linux install a Windows VM and follow the standard instructions here:
http://forum.xda-developers.com/showthread.php?t=2173465
Use KVM with a GUI or even easier use VirtualBox.
I'm a die hard linux geek too. I even run linux at work while all of our msp software was written for windows. You are better off just running an old copy of xp inside virtualbox trust me its just easier that way. You can use adb if you like (its the same thing the windows users use in their batch files and just rewrite the bash script, but you will save yourself lots of headaches just using virtualbox. -- my .02
Sent from my LG-P769 using xda premium
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
# what's the difference between unlocked boot loaders and being rooted?
# do you have to unlock the bootloader to get root access?
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
My bad. I should have read through your original question all the way before posting. I see that you are not rooted.
If you are on 10e ROM you can root in Linux:
http://forum.xda-developers.com/showthread.php?t=1990705
It will require rewriting the batch script as a Linux shell script. It is possible but nobody has done it yet.
If you are on 10g you will need Windows. I have also answered your questions below.
sentientsystem said:
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
It allows you to boot an un-signed kernel. You can boot custom ROMs basically.
# what's the difference between unlocked boot loaders and being rooted?
Root allows you to `su -` to the root user and own the whole system.
# do you have to unlock the bootloader to get root access?
No.
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
Click to expand...
Click to collapse
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
sentientsystem said:
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
Click to expand...
Click to collapse
Welcome!
I know that a long time ago when I ran VirtualBox in Ubuntu there was something I had to do to allow USB access to the VM.
Here are the current instructions directly from Ubuntu:
https://help.ubuntu.com/community/VirtualBox/USB
Good luck.
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
sentientsystem said:
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
Click to expand...
Click to collapse
Yes you can flash a pre-rooted image. They are available. Use the search?
I posted instructions on the first page showing how to boot recovery.
that's great news - that's all i really needed - i didn't see them before, at least, not conspicuously, but i'll search around again.
and, i must have some how missed your instructions, i'll look again.
thanks!
kevev said:
I posted instructions on the first page showing how to boot recovery.
Click to expand...
Click to collapse
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @everyone for your help.
sentientsystem said:
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
Click to expand...
Click to collapse
I've decided to help you out This page will give you some more info on the P769 and several kdz (roms) for the P769
The fastest way to root is to flash the V21B kdz (this is the Jelly Bean version for Canada) using this guide, http://forum.xda-developers.com/showthread.php?p=36351786
The reason why you want this rom is because it has a vulnerability that is easy to exploit with Jcase apk
Once your followed everything (and rooted), install Super Su and Busybox
Next install artas182x second init CWM (in case you can't find it on his page, the link is here )
Note: you will see blinking led lights when you see the LG logo (booting up) appear after a couple of seconds. To enter the CWM press the vol (-) when the lights start flashing.
After you installed Artas182x CWM you can recover from someones clockworkmod backup.
following info from Cmahendra's thread
Note: only restore CWM backups from P769 versions or MS769!!!!
Or check out the V10B (MetroPCS "JellyBean") CWM backup
Now the only 2 reasons to unlock the bootloader are:
1. Install a safer and better CWM
The reason why is because Artas182x CWM is a second init (bootstrap), so if you mess around with a busybox apk and something goes wrong or you remove a file that is required (for CWM), it will stop operating. You will have to reflash the kdz or fix what you changed to get it working again.) I've had this problem several times while messing around with different busybox apps and etc.
2. Custom roms
(which you stated you are not looking for) not worth talking about right now.
Answer to questions
The only pre rooted roms are clockworkmod backups, lol
The default recovery is useless to us (unless you feel like solving the problem)
Flashing back and forth (ice to jelly) comes with risk, the program used on Windows to flash is buggy at times. The best way (in my opinion) is to flash only when really required and mostly restore from clockwormod backups. The device is actually hard to hard brick, but it will require at lot more knowledge to get your device running again.
---------- Post added at 07:23 PM ---------- Previous post was at 07:16 PM ----------
sentientsystem said:
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @all for your help.
Click to expand...
Click to collapse
So what version are you on right now
Ice? Jelly?
i'm still on ICS for the moment. still trying to understand what i need to do next. re-reading your post for the 2nd time, and all the threads it references. making sure i don't screw any thing up. thinking about upgrading to JB, and trying this CWM. and looking into this "cyanogenmod" some more, to understand why i never see any one on this site mention it, and what all these "other roms" are about. lmao, like i said, i'm way new to this . it's a lot to take in, even for a web developer .
thanks \m/ (>_<) \m/
Updated 2/3/16 Master Download Link Added at Bottom of This Post For All Old and Current KDZ's
This method is confirmed working 100% for devices running 10b/11c/12b/23abc regardless of root/unlock state. While the .tot method is also working on Windows 7, users with Windows 8.1 are having difficulty using that method. Myself and @autoprime obtained a 10b KDZ file that has solved the issue for +10b updaters that couldn't flash back to 10b, so please send him some love for his help and for hosting the file on Team Codefire's servers for all to download. A big shout out to @quangnhut123 for creating the super sweet modified LG KDZ Flash Tool 2014 that makes KDZ flashing an absolute breeze!! He deserves some love as the previous KDZ flashing methods were anything but fun - especially on Windows 8. And another shout out to @deathsquad737 for initially testing the method for our device.
-Please this post and second post FULLY before asking questions!
-First remove any of the .tot flashing tools/programs that you may have already installed as they will conflict with the KDZ flashing tool.
-Download and install the latest LG drivers for your phone here (FYI I am linking the LG site directly instead of the file to ensure that you download the current up-to-date drivers): http://www.lg.com/us/support-mobile/lg-VS985-Metallic-Black
-Download the VS985 10b KDZ: Downloads Located Below
-Download the LG Flash Tool 2014 from this thread here: http://forum.xda-developers.com/showthread.php?t=2797190 and be sure to thank @quangnhut123 for his efforts. Also read that thread a bit so you understand how to fully use the tool exactly, but I will outline the process below.
-Extract the .zip folder to wherever you wish to keep it (desktop, downloads, etc).
-Copy the 10b KDZ file (or whatever KDZ your flashing) into the LG Flash Tool folder
-Power off your phone completely, hold volume up, plug in the usb cable, wait for any drivers to load, and you should then be in Download Mode
-Run LGFlashTool2014.exe (you may need to run as administer as its not an installed program, rather an executed one from wherever you saved the folder).
-You may need to install Visual C++ Runtime Library. If so, refer to the LG Flash Tool thread for more info on obtaining that.
-Select CDMA as your type
-Select Diag as your phone mode
-Select your KDZ file that you copied or pasted into the folder
-Choose the option of CSE Flash (this is a full wipe, you will lose your data). Do not choose Normal Flash when performing a downgrade, nothing good will come from doing that!! Another screen will open, just leave everything the way it is.
-Click the Start button and yet another window will appear showing a language selection screen. Just leave everything the way it is as Korean and hit OK. Don't worry, the tool is already set to flash in English.
-Wait until the Flash is done 100% and unplug/reboot... and that's it - now enjoy your corrected mistake and stop taking OTA's!!!
KDZ files rock, and are nice and easy to flash. No separate DLL files or changing ports either with the tool linked. If any other KDZ files become available in the future I will add them to this post along with any tool or flashing method changes. This thread will be solely kept for KDZ flashing for the VS985. I will also help as much as I can if you run into trouble, though I am not a Windows expert and actually only boot into it when I have to run programs like this....Linux MInt FTW!!
~KDZ Downloads~
-VS98510b_01.kdz: http://downloads.codefi.re/autoprime/LG/LG_G3/VS985 -Thanks to @autoprime
-Mirror for VS98510b_01.kdz (10b): https://mega.co.nz/#!7ERgXJbI!2KxATJt7q-HWvAPbTfVrT3wGuwPjWCw70N65MVlgfWg md5: d228ba692ef0c4704cba0b00fad8b8c
-VS98512b_00.kdz: https://www.androidfilehost.com/?fid=95916177934537134 -Thanks to @hokiealumnus for the AFH hosting
-Mirror for VS98512b_00.kdz (12b): https://mega.co.nz/#!7AwylQiZ!vK6rumjP0r1eP7lN37oeJ_cWLwal1DnriGDPUZGW1-0 md5: e8280b279d327b96689579a9eca22a3e
New download link to all KDZ files thanks to @roirraW "edor" ehT https://www.androidfilehost.com/?w=files&flid=35484
-For reference, here's @ins5736 thread for restoring using the .tot method: http://forum.xda-developers.com/verizon-lg-g3/general/restore-verizon-to-stock-t2827878 .
-Also there are reports of the tool deleting the KDZ you copied to the Flash Tool folder after the flash. I cannot confirm this, as it did not happen to me, but to be safe make sure you copy the file to the folder instead of pasting it so that you don't have to re-download the file for future use.
-Please note that the KDZ file we have is build # 10B.01, while the .tot file available is build # 10b.03. The only difference between the 2 files is that the .03 build is the actual released build that shipped with the phone, while the .01 kdz build was obviously a pre-released build. Its most likely some minor last minute changes/bloat added. We can't find any noticeable differences between the 2 builds.
-OTA's WILL FAIL USING THE 10b KDZ FILE WE HAVE due to a signing error with it being a pre-release. The purpose here is to downgrade, unlock, and flash whatever you want. This is NOT to return to an official stock state. You'll need to use the .tot file or the official LG Flash Tool that downloads the current build automatically in order to be in an official "stock" state. The 12b kdz is official and will allow OTA's
*Error Update* So with this leaked LP image, I've been playing with kdz'ing quite a bit and with a new Windows install I got to experience a few of the issues being reported by others that I have never seen, along with trying to troubleshoot some others. Did I manage to fix them easily you ask?? Hell yeah!
USB Disconnected Issue: This is a driver issue. Very easy fix, just download the latest Verizon drivers from the link I posted above and install them without phone plugged in. Power off phone, hold up, plug into usb and WAIT for download mode drivers to install (as stated several times in this thread). Click the balloon to watch the progress, this took about 10min on an i5/ssd machine - be patient. This is the predominant issue I think people are having. The drivers while in download mode are:
-USB Composite Device
-LGE Android phone or LGE AndroidNet for VZW USB Serial Port COM5 (this is the important one)
-CDC Serial or LGE AndroidNet for VZW USB Modem (this will fail if you are on a rom with certain VZW items removed - not a problem, its not needed)
-CDC ECM LGE AndroidNet for VZW NDIS Ethernet Adapter
If driver install fails, manually update them by pointing windows to the driver file you downloaded. I am not going any further here, use Google.
??????'s In The Field: easy, don't change region or language from Korean as stated in the OP. Leave it alone, it will flash in English I promise you. Result = all fields readable in English while running
Connection To Server Failed: Simple, ignore the window. Just drag it away, but don't close it. This is an offline hack originally indented to run online, deal with the window!
Progress Bar: The tool will initially analyze the phone, then when flashing starts, pay attention to the phone screen which will now say COM5. The blue progress bar on the phone is the important one. At around 80% on the tool screen, the phone will reboot. The flash is over and the bar will continue to progress into the 99% while rebooting - then the program will crash. You can disconnect now, you've been successful.
Thanks for the help and the new guide
WHATSAMATTA U ALUMNI
I'm getting a message saying "Path is too long or file problem" when adding the kdz. Any ideas?
droidiac13 said:
I'm getting a message saying "Path is too long or file problem" when adding the kdz. Any ideas?
Click to expand...
Click to collapse
Sounds like your linking the file path instead of directly copying the file right into the folder. Also try checking the file md5 with this one for the 10b kdz file: d228ba692ef0c4704cba0b00fad8b8ce
Don't Forget To Remove Previous LG FlashTool
When I first tried the method I was receiving a message "Path is too long or file problem". So I read through the instructions again. I failed to remove the previous LG FlashTool I was using. Once I uninstalled that program, everything went through without a problem. Thanks annoyingduck!!
I keep getting this and I installed all drivers. Any ideas? Thanks
Sent from my VS985 4G using XDA Free mobile app
kreep22 said:
I keep getting this and I installed all drivers. Any ideas? Thanks
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
Some basics to check first:
-Were you in download mode before executing the program?
-When you initialized download mode, did you wait to allow the download mode drivers to load before hitting start?
-Were all steps followed?
-Check cable, and try another one (this is very often the cause)
-Change usb port
-Don't use a 3.0 port, use a 2.0
Thanks for this excellent guide, Duck. Very simple to follow, well laid out, etc. I haven't actually done it yet, but I've got everything in place to do so (the flash tool, the KDZ file in the folder, etc.)
I assume once the downgrade is successful, just reroot with Stump, etc and wait for updates via the community?
Will future updates be available via this flash tool, or will they have to be flashed via TWRP? Sorry, I'm just now getting used to the LG G3 dev community, coming from an old GNEX.
Thanks!
continued error when trying ota
I have a problem. I was originally rooted without a custom recovery. I decided to try the ota and got the error message when trying to install. I then flashed this method (kdz) and got back to stock. I rerooted via stump and tried the ota again, failure. I then rewiped and kdz again, this time I did not root. Tried the ota again, no dice.
Any thought? I can flash the kdz fine and get phone to factory 10b but once I try to install the ota I still get the error.
killian1212 said:
I have a problem. I was originally rooted without a custom recovery. I decided to try the ota and got the error message when trying to install. I then flashed this method (kdz) and got back to stock. I rerooted via stump and tried the ota again, failure. I then rewiped and kdz again, this time I did not root. Tried the ota again, no dice.
Any thought? I can flash the kdz fine and get phone to factory 10b but once I try to install the ota I still get the error.
Click to expand...
Click to collapse
That's odd... You chose cse flash, not normal correct? Normal would not wipe your device and could definitely be the culprit for the ota failing. While cse mode is a complete wipe prior to flashing.
Correct. I did cse, full wipe. I dont know what's going on. I tried atleast 10 times from scratch. I still cant get the ota to install.
killian1212 said:
I have a problem. I was originally rooted without a custom recovery. I decided to try the ota and got the error message when trying to install. I then flashed this method (kdz) and got back to stock. I rerooted via stump and tried the ota again, failure. I then rewiped and kdz again, this time I did not root. Tried the ota again, no dice.
Any thought? I can flash the kdz fine and get phone to factory 10b but once I try to install the ota I still get the error.
Click to expand...
Click to collapse
annoyingduck said:
That's odd... You chose cse flash, not normal correct? Normal would not wipe your device and could definitely be the culprit for the ota failing. While cse mode is a complete wipe prior to flashing.
Click to expand...
Click to collapse
After using the method here to downgrade back to 10b and root. I too wasn't able to then S/W update to 11c using survival mode in SuperSU. I perform the OP procedures again and this time didn't root and still wasn't able to S/W update, kept getting error. So I used ---> [GUIDE][HOW TO][VS985] Restore Verizon to Stock to go all the way back. I'm now able to S/W update to 11c and keep root with survival mode set in SuperSU. I most humbly say that there may be a very slight issue with maybe the files here. I truly do appreciate the ability to return to 10b using this method after updating in the first place!
Thanks, ill try the other method and report back. wish me luck. Either way, a huge thanks to duck for the easy way to rerturn. I just wish kdz worked for future ota. It may be a file issue allowing us to revert to 10b but not then allowing future updates.
Use the kdz method then factory reset the device and see if that works.
I tried that. No dice.
annoyingduck said:
Use the kdz method then factory reset the device and see if that works.
Click to expand...
Click to collapse
I tried that as well.
gatorstew said:
Thanks for this excellent guide, Duck. Very simple to follow, well laid out, etc. I haven't actually done it yet, but I've got everything in place to do so (the flash tool, the KDZ file in the folder, etc.)
I assume once the downgrade is successful, just reroot with Stump, etc and wait for updates via the community?
Will future updates be available via this flash tool, or will they have to be flashed via TWRP? Sorry, I'm just now getting used to the LG G3 dev community, coming from an old GNEX.
Thanks!
Click to expand...
Click to collapse
Sorry, I missed this question. Yes, any future kdz's that become available will be updated here, along with any changes in flashing methods. Though it's pretty hard to beat the current tool that's available.
And yes, the idea here is to downgrade to 10b and be able to root, unlock, and flash anything you want. Still unclear as to why some want to take the 11c ota, but that's for another thread. The kdz method here is working where the tot was failing for some, and I personally think it's faster and easier to do than the tot method.
The third step might be clarified. Do you mean something like, "Power off your phone completely, then turn power on while also holding the volume up button..."?
markfm said:
The third step might be clarified. Do you mean something like, "Power off your phone completely, then turn power on while also holding the volume up button..."?
Click to expand...
Click to collapse
You should probably try it before trying to correct it.....
Nope, power off phone completely, hold volume up ONLY, plug in usb cable...it will auto power on into download mode
As we all know, Tungkick's Root Method by TOT instructions, are to be observed and followed step-by-step in order to achieve proper root on this device. One of the instructions is to leave the settings in LGUP, as "Refurbished".
Well, after accidentally flashing a zip file on my H900, my phone went through several boot loops and started giving me a headache from Hell. After considering the instructions by Tungkick, I thought, "What would Wesley do?" Think outside the box. Since I had not set my phone to MTP, I was not able to make any type of connection with the LG Bridge app, but once I crossed my fingers, ran LGUP and chose the "Ugrade" option, the phone rebooted like out of the box, and the good thing about this is that YOU DON'T LOSE YOUR DATA (pics, music, call logs, etc....) The recent lags my phone had been experimenting, went away and I was able to recover all my data using LG Bridge.
So, there. I hope this comes in handy for anyone experimenting issues and are Rooted.
Do you have a tutorial? Or links to this! I have the same issue please.
Nvm found the information tnx.
http://forum.xda-developers.com/att...g-h900-real-tot-make-tungkick-t3336317/page44
what zip did u flash? if u got bootloop with "fail *something*" on the top left, it's because u didnt unlock bootloader using fastboot (dev setting is not enough)
make123 said:
Do you have a tutorial? Or links to this! I have the same issue please.
Nvm found the information tnx.
http://forum.xda-developers.com/att...g-h900-real-tot-make-tungkick-t3336317/page44
Click to expand...
Click to collapse
Follow Tungkick's tutorial to "re-root" your phone, but instead of selecting "Refurbish", you'll select "Upgrade".
It's that simple.
If you have Xposed, you'll need to reflash it using Flashfire, and you'll have to re-install BusyBox. The rest of your apps keep the data, just as a computer would if you would to do an "upgrade" with the "without losing your files" option or something like that...sorry, it's been a long week.