I am creating this TerraBuzz kernel for my Galaxy Note2 N7105 that suits my daily usage.
There is no cutting edge and fancy development for this kernel as I made is as close as stock kernel based on source code provided by Samsung. Only cherrypick modification/enhancement from other developer to be implemented in my kernel.
I also remove some unecessary debug and log to make this kernel as light as possible.
Most of the credit goes to all developers listed.
Very-very big thank you and credit to:
1. Samsung who provide the source code
2. Great Developer AndreiLux (Perseus)
3. Great Developer Adam (Wanam)
4. Great Developer FranciscoFranco
5. Great Developer Simone201
6. Great Developer Andip71
7. Great Developer Speedmod
8. Great Developer Tegrak
9. Great Developer Faux123
10. Great Beta Tester (TerraBuzz, Romie, Chris, 07ex and many friends from Kaskus)
11. To whom I cherrypicked your coding/development
Feature:
1. exFAT support
2. Additional scheduler BFQv5r1, SIO (default), VR
3. CPU Governor: Performance, PegasusQ, TerraBuzzQ (default)
4. Lower GPU threshold from 160 MHz to 266 MHz
5. Dynamic Sync Control
6. Reduced Samsung Battery Monitor Wakelock
7. Increased USB Charging rate to 1000 mA
8. Removed CPU locking by GPU mechanism
9. AFTR Idle Mode
10. Support Yellow Triangle Away
11. ZRAM support (you can delete the script under /System/etc/init.d)
Source code:
https://github.com/aatjitra/7105u1/
Download for N7100 => http://www.mediafire.com/download.php?915s5i1qp15jl1a
Download for N7105 => http://www.mediafire.com/download.php?lkki9i1xqncjk4c
Any bug, please report here and please explain in detail for how do you find the bug and if it possible steps to replicate it.
Any name missed in credit, please forgive me and let me know. I will add it accordingly.
Any feedback, let's discuss it.
Change log:
PR2.3 - Initial release for public
WARNING:
This kernel is only for stock ROM or TW Based custom ROM
TerraBuzz PR2.5
Download for Non-LTE Device: http://www.mediafire.com/?jqs1wq8h1o4y3hh
Click to expand...
Click to collapse
Download for LTE Device: http://www.mediafire.com/?56ybzt7p5omyak0
Click to expand...
Click to collapse
Change Log:
1. STweak Support for CPU Scaling, Hotplug, Voltage Interface, Clock/Frequency Interface
2. STweak Support for BUS/Internal Scaling, Voltage Interface
3. STweak Support for GPU Scaling, Voltage Interface, Clock/Frequency Interface
4. Support CPU scaling for Frequency for Responsiveness to improve smoothness on low frequency
5. Support CPU for Fast Down Scaling for aggresive down scaling. Possible to save battery life
6. Modification on Asynchronous I/O latency to a solid-state disk greatly increased
If you have used TerraBuzz PR2.5 beta version, please remove folder /data/.TerraTweak to reset STweak completely.
Any bugs please report.
Thanks.
Click to expand...
Click to collapse
TerraBuzz PR2.6 goes online...
Change Log:
1. Support MDNIE (color) tweak interface by STweak
2. Revert jRCU
3. Block optimization for IO Scheduler
4. Fix some parameters in STweak
Click to expand...
Click to collapse
Download for N7100: http://www.mediafire.com/?jid1i6k6cbk6ej1
Click to expand...
Click to collapse
Download for N7105: http://www.mediafire.com/?6n1dxqbihe7mskx
Click to expand...
Click to collapse
Instruction:
1. With current version (PR2.5), open STweak and go to 'Extras' and tap 'Reset settings to default'. The apps will close by itself and let it be.
2. Open Root Explorer or any file explorer with root access, go to folder /data and delete the folder .terratweak
3. Download kernel that match your device type and save it to internal/external storage card on your phone.
4. Flash the kernel via TWRP or CWM.
5. Reboot and let it stay for a while or until the icon 'checking sd card for error' is gone.
6. Open STweak and now you will see a control tab for SCREEN
Click to expand...
Click to collapse
I have tested this kernel with these following ROM on my N7105 and confirm they works flawlessly:
a. Stock ROM
b. DMC3
c. CleanROM ACE
Hope you guys enjoy it...
Click to expand...
Click to collapse
OK.. This is TerraBuzz PR2.7
There is an interface for charging current and volt... It is adjustable via STWEAK...
As usual, you need to follow these steps in order to make the setting is available:
1. Reset STWEAK to default.
2. Delete a whole folder in /DATA/.TERRATWEAK
3. Flash the new kernel
4. Let it boot and settle
Then you can play around with STWEAK again...
DOWNLOAD FOR GT-N7100: http://www.mediafire.com/download/arjpq46c3xco8nz/TerraBuzz_N7100_PR27_CWM.zip
DOWNLOAD FOR GT-N7105: http://www.mediafire.com/download/jd8252mvfwu2jqo/TerraBuzz_N7105_PR27_CWM.zip
Click to expand...
Click to collapse
TerraBuzzQ CPU Governor explanation
I tried a few CPU governor which can suit my preferences that turn off CPU core in the load is light to save battery.
And I come to LulzactiveQ by Tegrak that initially I think this is suitable for me. Nobody is using this governor for Note2 and I dare myself to try it on my own.
Later on, I modified the source code for LulzactiveQ to remove some parts that I don't need and create my own logic for this cpu governor.
There are 3 threshold for CPU load:
High Threshold = 100%
Up Threshold = 60%
Down Threshold = 30%
If CPU load = High Threshold (CPU Load = 100%)
CPU scaling per 200 MHz until it reaches maximum frequency 1600 MHz.
If Up Threshold < CPU Load <= High Threshold (CPU Load between 61% and 99%)
CPU scaling per 100 MHz until it reaches 1400 MHz and stop at that point.
If Down Threshold < CPU Load < Up Threshold (CPU Load between 31% and 60%)
CPU scaling per 100 MHz until it reaches 1200 MHz and stop at that point.
If CPU Load <= Down Threshold (CPU Load less than 30%)
CPU down to lowest frequency 200 MHz.
By this logic, TerraBuzzQ governor suits my daily usage patern and tested by beta tester team that battery life is great and no lag encounter in heavy game such as Real Racing 3.
Reserved for further usage
Screenshots
Here are some screenshots collected from some of our users in the development of this kernel using various ROMs. Please use it as reference only, actual experience and results may differ.
Amazing kernel.. Very fast .. Stable.. Battery friendly..
great kernel
Thanks TerraBuzz & aatjitra
:shakehand2
:ilovekaskus
:iloveindonesia
1st page :victory:
just to say Hi
Sent from my Nexus 4 using Tapatalk 2
thank you
install now...
Nice.. Running PR2.3 now.. :thumbup:
Sent From My Galaxy Note II
I've been using this kernel for my note running crash rom and it was good so far.. Great battery life and it also balance with the performance, good work om mod...! [khai81]
Sent from my GT-N7100 using xda premium
Best kernel I've ever try for my N7100, especially the Terrabuzz governor...
Battery friendly, yet smoothest....
sent from my mobile
I am assuming it is based on the lastest mc3 kernel from samsung? Thanks
Sent from my SGH-T889 using Tapatalk 2
Why can't I download the n7105 version from my mobile direct? Download just won't start.
Sent from N7105 at the corner of this rounded earth.
Jt004 said:
I am assuming it is based on the lastest mc3 kernel from samsung? Thanks
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Yes sir..
Sent from my GT-N7105 using xda premium
aatjitra said:
Yes sir..
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Hi.
Do u have any other link to download? I really can't download use my mobile from mediafire. No idea why.
Sent from N7105 at the corner of this rounded earth.
antique_sonic said:
Hi.
Do u have any other link to download? I really can't download use my mobile from mediafire. No idea why.
Sent from N7105 at the corner of this rounded earth.
Click to expand...
Click to collapse
Sure...
Please try this...
https://www.box.com/s/cdrcj3vs5xmhkmh0w5ob
aatjitra said:
Sure...
Please try this...
https://www.box.com/s/cdrcj3vs5xmhkmh0w5ob
Click to expand...
Click to collapse
Thanks aatjitra.
Downloaded and will let u know the result after testing.
Sent from N7105 at the corner of this rounded earth.
The best kernel for me
This is the best kernel for my Galaxy Note II with Crash Rom.. Battery is friendly and smoothness is really cool.. I can catch up the screen on until 7 hours..
Thx mate.. #Wel
Running great on the VZW Note 2
Sent from my SCH-I605 using Tapatalk 2
can add voodoo sound support?
Related
[KERNEL][23/07] █░ SGSII | 2.6.35.7-MirageS2 [v5]- STOP BATT DRAIN | OC 1600mhz ░█
Firstly, I'm not responsable if you brick your phone doing overclock or a bad use of this kernel. So, be careful.
This kernel is built from a custom modified source by me (I've added and modified some things to an updated SGS2 source), I've tried to modify it to get the lowest battery drain, so this kernel should stay in a step between performance and battery, if you like some more performance you can download SetCPU, or other custom app to modify freqs and default governor.
What's included:
-For XXKG1/G2/G3 (should work with olders too)
-Modified Freq range 11 steps (200-400-500-600-800-900-1000-1200-1400-1504-1600 Mhz)
-CPU UV sysinterface (thanks to ninphetamine)
-Modified cpufreq.c to force processor to go step-by-step in freqs.
-Default Freq: 500-1200 Mhz ondemand (the best to get low batt drain, should drain lower in sleep)
-Lowest maximum freq blocked to 400mhz (so if you put 200-200, it will run 200-400, locked due to better performance)
-Available governors: interactive-smartass-conservative-userspace-powersave-ondemand-performance (custom modded smartass, ondemand and interactive governors)
-CFS Scheduler.
-SLQB Allocator.
-CFQ Block IO Scheduler (Available: no-op, deadline, cfq)
-Modified Initramfs from saturn_de (thanks to him and Chainfire) - I've added some values to this init.rc to get lower battery drain and some performance. (some different from saturn)
-CWM 4.0.0.2 Recovery
-Disabled Profiling support and debugs, added ThumbEE, Improved Control Group Support.
-Added some CFQ IO tweaks
-Changed dalvikvm heapsize to 60m (this should improve performance on tasking)
-Touchscreen fix added (thanks to vicenzo91)
*[email protected]
*[email protected]
*int:fast is not included due to performance problems.
*not compatible with tegrak OC (tested with SetCPU)
test with performance 1504mhz, vfs_cache_pressure=100 and dalvik 64m (default vfs=70, you can modify it downloading Sysctl Config from Market)
v5:
*set samsung-update1 as base (fix reboots)
*added slqb patch
*removed bfq
Download:
SERVERS:
[USA]SGSII-2.6.35.7-MirageS2-v5
[DEUTSCHLAND]SGSII-2.6.35.7-MirageS2-v5
[Mirror]http://sgsii.z4mb0.net/Kernels/SGSII-2.6.35.7-MirageS2-v5.tar Mirror by El TeKi thanks
reserved.....
Wow nice to see you here. Will try it out immediately
Sent from my GT-I9100 using XDA Premium App
looks really really really promising... trying it now
how come i only get scores around 3200 with every rom and kernel? and everyone else has so high
going to try this one soon
yeaaa baby !!
Good to see you here Neo. Been a Aurax/Reflex fan on the Desire...
This is good news!
Regards
Awesome, will try this when i get home
Sent from my GT-I9100 using XDA Premium App
Just flashed. Oc to 1.5ghz. First quadrant 4566
will give feedback on batt consumption soon
Hope to see soon a rom made by you..... On my old desire i had your auraxtsense!!! U are great
Very nice neo. I'm a fan of your desire rom.. now u make a kernel for sgs2. No doubt, i will try it in the future. I hope u release your own version rom for sgs2.
+1
Sent from my GT-I9100 using XDA App
+2
Sent from my GT-I9100 using XDA App
trunks986 said:
Hope to see soon a rom made by you..... On my old desire i had your auraxtsense!!! U are great
Click to expand...
Click to collapse
Soon mate, soon. Thanks
Holy shiznit,who would've thought we'd be seeing you here Neo?I gotta thank you for the first rom that made me actually love my Desire.Not the only one,but it was the first whatsoever.
I'd like to tell you a thing or two(or three ) though.
1)You should add support for SetCPU's voltage control.I know there are other apps that do the same thing,but the number of people using SetCPU is massive.And on the Galaxy S 2,undervolting is very important,especially to avoid issues with overheating.
2)Could you pleaaaase lower the max clock by only 4MHz?My phone is unstable at 1504MHz with 1350mV,while it's rock stable at 1500Mhz with 1325mV.And I'm serious,4MHz only and it makes a huge difference,while performance-wise it's the same.
3)You could also overclock the GPU.200MHz with 750mV min and 400MHz with 1100mV max seems stable for everyone.You can gain quite a lot of performance,while it doesn't heat or consume more.You can also test if what I say is true yourself.
Else that those three...Well,welcome to our world pal!The world of power!
I don't know what you did to get 5000 in productivity on smartbench11 cos I can't hit more than 4300 even with the vfs setting changed...and yes I am overclocked to 1.5ghz and locked there.
Hi can make a kernel with default clock with 1,5ghz please ?
Yanardag said:
Hi can make a kernel with default clock with 1,5ghz please ?
Click to expand...
Click to collapse
Just download SetCPU and set the min and max to full.
Mirror http://www.megaupload.com/?d=4LLP5HPF
Another mirror http://www.multiupload.com/L215724GBY
Just flashed your kernel. Thanks
Is auto brightness broken ? The brightness goes to 100% on autobrightness eventhough it is night and there is no light
Tried wiping dalvik cache but did not help
EDIT: Covering the light sensors with a black blanket did not change anything. So there seems to be a problem with auto brightness. I am on stock KG1 leaked rom
Change log:
http://faux.romhost.me/grouper/kk44/changelog.txt
kernel files
http://faux.romhost.me/grouper/kk44/
ES - http://faux.romhost.me/grouper/kk44/
Mainline - http://faux.romhost.me/grouper/kk44/
Ultimate - http://faux.romhost.me/grouper/kk44/
my op has issues.. can't do much...
github: https://github.com/faux123/Nexus-grouper
FauxClock App recommended Settings"
CPU Control
Max clock - GHz 1.6 GHz for performance, 1.3 GHz for battery
Min clock - MHz 100 MHz for both
CPU Governor - Interactive for performance and for battery
CPU Quiet Governor - userspace for performance, Balanced for Battery
Tegra3 Freq Cap - Off for performance, On for battery
Set On Boot - On
Voltage Control
Set On Boot -
Global CPU Voltage - Your preference
Interactive gov control
Hispeed - 85 for both
Hispeed Frequency - 1.6 GHz for performance, 1.3 GHz for battery
Timer Rate - 20000 for both
Min Sampling Rate - 50000 for both
Set On Boot - On
GPU Control
GPU Governor - ondemand for both
GPU Fast Response - 80% for Performance, 40% for battery
Set On Boot - On for both
I/O Scheduler Control
I/O Scheduler (eMMC) - SIO for both
Readhead Size (eMMC) - 768 for both
Set On Boot - On for both
Misc Control
Dynamic File Sync - On for both
TCP Congestion Control - Westwood for both
Z-Control
Set On Boot - On for both
ZRAM Disk size - 150~200 Megabytes (or 50 MB when disabled)
ZRAM Enable/Disable - Enable if you mult-task often
Clear VFS Cache After Boot - On
Auto FS Writeback Delay Mode - On
Swappiness - 100% if ZRAM enabled, 0% if disabled
VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
Dirty Ratio - 20% for both
Dirty Background Ratio - 5% for both
Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
DUE TO MY EXTREMELY BUSY SCHEDULE BOTH @ WORK AND @ HOME, I WILL ONLY MAKE MAJOR ANNOUNCEMENTS ONCE PER WEEK
Open Beta may not be stable and may cause issues with your phone!
By loading open beta you have agreed to:
1. To report all random reboots with associated /proc/last_kmsg
2. To provide feedback on errors or bugs with detail phone information such as ROM, kernel version, and apps
3. Participate in Forum discussions for the beta software with others without FLAMING each other or post useless information such as:
a) Phone doesn't boot (without providing any additional information, ROM versions etc)
B) phone is too hot (without providing any additional information, ie OC freq, UV etc)
The Open Beta system is designed to have the community help each other and the developers. This way, all potential bugs are flushed out so the final released version will be stable and error free. The more actively you participate in Beta Testing the better the final product will be (you are really helping yourself to create a better community software).
If you do NOT agree with the statements above, DO NOT load my Open Beta software.
Kernel 015 Open Beta 1 is out! (BETAs ARE ALWAYS ULTIMATE VERSION unless I stated otherwise)
JB ==> http://faux.androidro.ms/grouper/beta/grouper-faux123-kernel-v015b01.zip
JB ES version ==>
[ build 1 ]
Merged with Google Mr1.1 source updates!
Added 2 interactive governor patches
Hey Faux123, what's up Nice to see you here!
Omg I'm the happiest person right now. Faux made my phone usable, going to make this tablet even better.
Keeping my eye on this.
Sent from my LG-P999 using xda app-developers app
Accidentally uploaded a test version 2 (broke wifi)... re-uploaded the correct file now...
Woohoo faux!
Sent from my SGH-I727 using xda premium
Welcome faux123! Good to see more & more developers.
Used your kernels on matrix and gnex, awesome work thanks so much
Sent from my Nexus 7 using xda premium
awesome
love the AP33 title
GPU unlock?
Very impressed with performance and feel so far. Thank you.
We're only missing franco now!
Sent from my Nexus 7 using xda premium
Wow very happy this morning you did wonders for my g2x and I know you will do the same for the n7 thanks bro downloading now... and if you ever need a tester I'm in
Sent from my Nexus 7 using Tapatalk 2
003 is out. Fixed bootlooping for some users.
I know I know faux from somewhere.... Atrix or Xperia Play....
Sent from my Galaxy Nexus using xda app-developers app
faux123 said:
003 is out. Fixed bootlooping for some users.
Click to expand...
Click to collapse
Great, I've only just checked back and seen v003 is out.
I had what appeared to be bootloops on v002, but it still boots fine. It just loops onto the initial splash screen about four or five times and then the bootanimation starts up and the boot is fine.
But thanks for v003!
Running great on paranoidandroid.
Sent from my Nexus 7 using XDA Premium HD app
omg , just got my nex7 today and at the same day faux brings out a nex7 kernel !! awesome !! love your work on my gnex
does this kernel have gpu oc?
*edit*
Sent from my Nexus 7 using XDA Premium HD app
Hi All..
First lemme give my phone details:
Galaxy S3 International (i9300)
Kernel : Siyah 1.8.9
ROMs (Dual Boot)
: WanamLite v5.5 (based on ZSEMA1)
CM10.1 Nightly
MODS : JKAY framework
My problem is that there is noticeable UI lags when in the homescreen or the app drawer.
I have not overclocked/underclocked the CPU. Have no undervoltage setting as well. In STweaks, the max CPU freq is set to the stock 1400Mhz and the min CPU freq is set to the recommended 200Mhz. And I have kept the "touch boost level" to 1200Mhz.
When I see the UI lags, I used CPU spy to monitor the CPU speeds. What I could see was that the speeds were at the lower end (200 - 800 Mhz) !!! Since the touch boost level is set to 1200, shouldn't the CPU jump to 1200 Mhz when I unlock/touch the screen ? I agree that the CPU speed needn't stay at 1200Mhz after the speed boost, but shouldn't it stay at a freq to ensure that there is no UI lag ?
If the operating freq is at 1400Mhz, the UI is perfect !!! It goes to this state automatically usually (takes a while ), or manually I can make this happen by setting the min CPU freq to say 1300 MHz from STweaks. Once this state is hit, the UI wrks with no lag until say I lock the screen, or maybe the device goes to sleep for a while.
Any ideas as to why the CPU freq stays at lower values and doesn't come up enough to give a lag free UI ?
stanzlavos said:
Hi All..
First lemme give my phone details:
Galaxy S3 International (i9300)
Kernel : Siyah 1.8.9
ROMs (Dual Boot)
: WanamLite v5.5 (based on ZSEMA1)
CM10.1 Nightly
MODS : JKAY framework
My problem is that there is noticeable UI lags when in the homescreen or the app drawer.
I have not overclocked/underclocked the CPU. Have no undervoltage setting as well. In STweaks, the max CPU freq is set to the stock 1400Mhz and the min CPU freq is set to the recommended 200Mhz. And I have kept the "touch boost level" to 1200Mhz.
When I see the UI lags, I used CPU spy to monitor the CPU speeds. What I could see was that the speeds were at the lower end (200 - 800 Mhz) !!! Since the touch boost level is set to 1200, shouldn't the CPU jump to 1200 Mhz when I unlock/touch the screen ? I agree that the CPU speed needn't stay at 1200Mhz after the speed boost, but shouldn't it stay at a freq to ensure that there is no UI lag ?
If the operating freq is at 1400Mhz, the UI is perfect !!! It goes to this state automatically usually (takes a while ), or manually I can make this happen by setting the min CPU freq to say 1300 MHz from STweaks. Once this state is hit, the UI wrks with no lag until say I lock the screen, or maybe the device goes to sleep for a while.
Any ideas as to why the CPU freq stays at lower values and doesn't come up enough to give a lag free UI ?
Click to expand...
Click to collapse
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Can I just say, 1200mhz?!?! Default is 800 and I'm using 700 on my device. It's a bit extreme.
Perhaps your governor is affecting smoothness. Try using pegasusq. Or it may be the app your using to change CPU frequency doesn't even have ROOT access
International S III 16GB / CM10.1 / Gokhan's SK
paintball23456 said:
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering and disable hardware overlays (resets on boot)
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Click to expand...
Click to collapse
No. Do not disable hardware overlays. That will, if anything, cause your device to lag more.
Theshawty said:
No. Do not disable hardware overlays. That will, if anything, cause your device to lag more.
Click to expand...
Click to collapse
O_O not in my case..
paintball23456 said:
O_O not in my case..
Click to expand...
Click to collapse
This is a quote from a guy over at rootzwiki
Without a hardware overlay every application that is displaying things on the screen will share video memory and will have to constantly check for collision and clipping to render a proper image, this can cost a lot of processing power. With a hardware overlay each application gets its own portion of video memory, getting rid of the need to check for collision and clipping.
Basically, using hardware overlays can reduce CPU usage by quite a bit, so I would leave it enabled.
Click to expand...
Click to collapse
Theshawty said:
This is a quote from a guy over at rootzwiki
Click to expand...
Click to collapse
Right.. then why dafudge is my s3 SMOOTHER with it enabled?
paintball23456 said:
Right.. then why dafudge is my s3 SMOOTHER with it enabled?
Click to expand...
Click to collapse
Maybe you're just lucky, I dunno. It's better to let a real dev share his/her input on this. I'm merely a noob who knows how to Google...
Theshawty said:
Maybe you're just lucky, I dunno. It's better to let a real dev share his/her input on this. I'm merely a noob who knows how to Google...
Click to expand...
Click to collapse
L.O.L but not that big of a noob... thanks for the info - and also reminding me for the 100,000,000,000,000 time to sign up to rootwiki
paintball23456 said:
L.O.L but not that big of a noob... thanks for the info - and also reminding me for the 100,000,000,000,000 time to sign up to rootwiki
Click to expand...
Click to collapse
Heh, maybe not.
Uhm, you're welcome, I guess? :good:
It's probably smoother due to the fact that the CPU will be working at a higher frequency more often. Those that have disabled hardware overlays are causing their CPU to ramp up every time an application has to render an image
paintball23456 said:
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Click to expand...
Click to collapse
The lag is more obvious in the Touchwiz based Wanamlite ROM.
1) As i said, when running at 1.4Ghz (with stock voltage settings) itsef the UI is smooth. So I don't actually want to overclock. . The problem is that the CPU speed doesn't rise up and stays between 200-800 causing the lag.
2) Will try changing the governor (first let me read how it is different from pegasusq ).
3,4) Again, with stock settings itself the UI is smooth. The problem is what i have said under point 1.
5) Already done.
6) WIll try setting scheduler to CFQ (again, lemme read bout it first )
7) GPU rendering is already ticketd. Hardware overlays are not disabled (thought this would increase the lag).
Is NULL_22.1 a Touchwiz based ROM ? And Jelybam is an AOKP ROM I supose ?
Wouldn't want to do the last option.
Also, I saw that you have mentioned three ROMs in your signature. Siyah lets you dual boot right, how come 3 ? Or were you just talking about your preference ?
And, does siyah 1.8.9 for the S3 let us boot with NULL_22.1 and jellybam in dual boot? Are all these combos possible ?
Sammy + CM10.1 (this works, I knw )
Sammy + AOKP
AOKP + CM10.1
raminica seemed
23Six said:
Can I just say, 1200mhz?!?! Default is 800 and I'm using 700 on my device. It's a bit extreme.
Perhaps your governor is affecting smoothness. Try using pegasusq. Or it may be the app your using to change CPU frequency doesn't even have ROOT access
International S III 16GB / CM10.1 / Gokhan's SK
Click to expand...
Click to collapse
From what I understood, it just boosts upto 1200Mhz on touch and needn't stay there. Right ? The only downside there is battery life I suppose ?
Am already using pegasusq and yes, sTweaks does have root access.
###########################################################################################################################
These kernel settings are dead! They will not be updated or worked on. Support has ended for them! If you want to keep using settings like this but that are better please switch to the Nebula Kernel!
Here is a link to the new kernel settings for the Nebula Kernel!
http://forum.xda-developers.com/lg-g3/general/kernel-settings-nebulakernel-rev10-2-1-t3258520
##############################################################################################################################
USE AT YOUR OWN RISK!! MIGHT NOT WORK FOR ALL G3!!
MAKE BACKUP OF YOUR DEVICE BEFORE USING THESE FILES!!!
Please Do not change or mod these settings or re-release them! If you do i will hunt you down and murder your favorite pet and turn them into a nice steak! [That was a joke......]
This thread is for setting i made for the LG G3 Verizon Wireless (vs985)
These settings are to be used with SetCPU and Trickster Mod (You'll need Trickster Mod donate pack to restore the Trickster Mod backup settings)
These settings .zip are not flashable. You will need to unzip the pack ON DEVICE.
PACK includes:
SetCPU profiles:
Multimedia - Other, Multimedia - Photos, Multimedia - Music, Multimedia - Video, Multimedia - Camera, Emulator- MyBoy!, Social, Google Chrome, GPS Navigation and Maps [NO ACTIVE], Phone/Contacts, HIGH TEMP!! 170+oF+!!, Games (HD-Large), Games (HD-Small), Charging (AC/USB), Screen Off, Everyday Use. Those are the profiles in the SetCPU pack. They are still being tweaked!
Trickster Mod Setting: EXTREME Undervolting, On_demand Governor tweaking, minfree_Control (RAM Management), 1512 i/o fiops, and some other awesome things! They are still being tweaked!
Install directions for these files:
1. Download the .zip file from this page
2. Unzip pack
3. Put the LG G3 CM12.x JediKernel 3.0 [1.x] [2.88GHz].setcpu.json in the root of your onboard SD card partition. SetCPU will find the files on its own when you go and restore it
4. Put the LG G3 (vs985) CM12.1 JediKernel 3.0 2.88GHz [09-19-2015] file in the tm_profiles folder in the on board SD card partition.
Then go into Trickster Mod and touch restore and select the latest version of the files
5. Download NOMone Resolution Changer and set your Resolution to 1080 x 1920 with the DPI settings of 320! This is just something i forgot to add! This will help you get MAXIMUM proformance and battery life since your display will not be pushing a 1440p resolution! LINK TO APP [https://play.google.com/store/apps/details?id=com.nomone.resolution_changer&hl=en]
6. ENJOY THESE FILES and you're instantly AWESOME LG G3!
I do not take ANY credit AT ALL for the making of the kernel! I did not build the KERNEL! All credit goes to @ptmr3 !
These settings ONLY work on the JediKernel! If you use the Trickster Mod Settings on any other kernel the device will crash and boot loop
DOWNLOAD THIS BADASS KERNEL FROM THIS BADASS DEV!
Kernel link: http://forum.xda-developers.com/ver.../kernel-jedikernel-g3-1-0-08-20-2015-t3183997
GeekBench scores in the image i added!
1. Single Core: 1115 | Multi Core: 3363
2. Single Core: 1071 | Multi Core 3502
[CHANGELOG]
09-12-2015: [V1.0 Stable]
1.Release of the pack!
2.Release pack date isn't current but it's the newest/latest build/compile of the settings pack.
09-18-2015: [V1.1 Stable]
1. SetCPU: Multimedia-Camera Added Open camera
2. SetCPU: Google Chrome lowered MAX CPU Freq from 1959MHz to 1728MHz for stability
3. Trickster Mod: Much needed CPU voltage tweaking! Now more stable but keeping extreme undervolting and keeping temp down and saving battery
4. Trickster Mod: OnDemand Governor tweaking. Now CPU and GPU play nicely together. If any lag or frame drops were in the last build it is most likely gone.
09-19-2015: [V1.2 Stable]
1. SetCPU: Nothing changed!
2. Trickster Mod: CPU voltages raised for more stability!
3. Trickster Mod: OnDemand Governor tweaked. Still testing can't tell if it drops performance or raised it up a bit!
09-19-2015: [V1.2-1 Stable]
1. Added Kernel Adiutor support! READ FILE INSTALL DIRECTIONS ABOVE! [STILL IN TESTING STAGE]
09-23-2015: [V1.3 STABLE]
1. Trickster Mods: Fixed CPU voltage setting for more system stability.
2. Trickster Mod: Reverted back to On Demand settings that were in V1.1!
3. SetCPU: No Change. Changes coming next version build release!
4. Kernel Adiutor: Turns out the settings i released for this app don't work. The file in this pack has not been updated nor does it work from what i have heard from a tester!
10-01-2015: [V1.4 STABLE]
1. Trickster Mod: Fixed CPU voltages! Its more stable now!
2. Trickster Mod: Updated On-Demand Governor! I tweaked the settings a little bit! The user can try the setting if they want! By default it is 0.2 but 0.3 is the testing settings (That is if it shows both!)
3. SetCPU: Multimedia - Video: Added Popcorn Time Remote
4. SetCPU: Google Chrome: Put MAX CPU freq/speed from 1728MHz to 1958MHz
5. SetCPU: Charging (AC/USB): Put MAX CPU freq/speed from 2572MHz to 2457MHz
6. SetCPU: Screen Off: Changed Governor from conservative to On Demand for better proformance when waking the display hopefully battery life will not change. Please change the Governor to conservative because On Demand drains a little battery. It sat in 268MHz for a hour because the Governor was being hyperactive!
7. GPU Navigation and Maps NOW enabled and added Maps (Google Maps) The reason it was disabled was because i was having issues with it not switching to profile when Google Maps was opened. Still testing this profile! Tell me if you got it to work and how!
11-08-2015: [V1.5 STABLE]
1.Trickster Mod: Fixed/tweaked the Voltages! The devices seems more stable for me but i still tweaking the to get the most out of the device!
2.Trickster Mod: The OnDemand Governor was tweaked but i'm still using the 0.2 version because it seems to be the most perfect for everything!
3. SetCPU: I made too many changes and upgrades to the profiles to be able to write them all down. I made to new profiles Games HD large and small.
11-11-2015: [V1.6 STABLE-TESTING]
1. SetCPU: Changed MAX CPU freq for Screen Off profile from 576MHz down to 499MHz
2. SetCPU: Added TrueCaller and TrueDialer to the Phone, Contacts profile
3. SetCPU: Tweaked some other small things that forgot.
4. Trickster Mod: Complete Redo/Remake of the already extreme under voltage settings! This is still be tweaked! Not 100% stable yet. I've had a few crashing while using my phone.
11-13-2015: [V1.6.1 STABLE-TESTING]
1. SetCPU: No changes. Comes with the same file that is in 1.6 STABLE-TESTING package
2. Trickster Mod: More speaking of the voltages. Still have crashing here and there but i'm still working on perfecting it!
SEE NEWEST/LATEST THREAD POST TO SEE THE VOLTAGE TABLE COMPARED TO STOCK VOLTAGES!
11-18-2015: [V1.6.2 STABLE-TESTING]
1. SetCPU: Camera: Changed Max frew from 1728 to 1958 and changed governor from conservative to OnDemand.
2. SetCPU: Multimedia Video: Changed Max freq from 1958 to 1728 because i kept getting crashing while playing YouTube videos in 720p 60FPS
3. SetCPU: Multimedia Music: Changed Max freq from 2265 to 1958 because i was getting better battery life with Google Play Music.
4. Trickster Mod: Tweaking of the voltages. It's a lot more stable now! I'm getting a whole day of battery life with light to medium use and still get 80% of battery at the end of the day!
Please report back after updating!
If you encounter any device crashing please tell me
Looks awesome bro, good work!
Sent from my LG-D850 using XDA Free mobile app
ptmr3 said:
Looks awesome bro, good work!
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! What do you think about my settings? Since your the maker of the kernel.
MaddMaxx636 said:
Thanks! What do you think about my settings? Since your the maker of the kernel.
Click to expand...
Click to collapse
Haven't had a chance to dig in yet, I'll check it out
Sent from my LG-D850 using XDA Free mobile app
@madmaxx
Thanks for sharing your setting.
Just a suggestion, but wouldn't it be easier to use Synapse and share the profile vs using two apps. Maybe you have your reasons so don't take this as anything other than me thinking out loud. :thumbup: :beer:
Sent from my LG-VS985
Sir-Lancelot said:
@madmaxx
Thanks for sharing your setting.
Just a suggestion, but wouldn't it be easier to use Synapse and share the profile vs using two apps. Maybe you have your reasons so don't take this as anything other than me thinking out loud. :thumbup: :beer:
Sent from my LG-VS985
Click to expand...
Click to collapse
None taken! The reason I use these 2 apps are because Synapse is horrible! (My opinion) if you would perfery I can try to build my settings into that app for those who use it! Tomorrow I'll be releasing a new build of the files with much need tweaking.
MaddMaxx636 said:
None taken! The reason I use these 2 apps are because Synapse is horrible! (My opinion) if you would perfery I can try to build my settings into that app for those who use it! Tomorrow I'll be releasing a new build of the files with much need tweaking.
Click to expand...
Click to collapse
Na man, no worries. Was more curious than anything. Synapse for me personally just has too many settings and for someone like me more ways to make a hot mess. Lol
I use kernel adiutor mainly because its baked into the rom and one less app I need to install.
:beer:
Sent from my LG-VS985
Sir-Lancelot said:
Na man, no worries. Was more curious than anything. Synapse for me personally just has too many settings and for someone like me more ways to make a hot mess. Lol
I use kernel adiutor mainly because its baked into the rom and one less app I need to install.
:beer:
Sent from my LG-VS985
Click to expand...
Click to collapse
I use that app too! I can build setting files for it!
After looking for a way to backup settings in kernel adiutor. i couldnt find a way to back them up. If you know how then please tell me! If i can back them i will upload them in the next update.
I'm not 100%, but this should be what to do...
In the app Tools/Profile/hit the + tab/tic select all or ?/ and it creates the settings profile
This part I'm willing to test with you. In your file explorer app go to the root tab.
/data/data/com.grarak.kerneladiutor/files/profiles.json
This is the profile you created. I'm assuming if I placed your file in the same folders on my device I would see the profile you created.
Sent from my LG-VS985
Sir-Lancelot said:
I'm not 100%, but this should be what to do...
In the app Tools/Profile/hit the + tab/tic select all or ?/ and it creates the settings profile
This part I'm willing to test with you. In your file explorer app go to the root tab.
/data/data/com.grarak.kerneladiutor/files/profiles.json
This is the profile you created. I'm assuming if I placed your file in the same folders on my device I would see the profile you created.
Sent from my LG-VS985
Click to expand...
Click to collapse
Well i can try them when im free! The thing is that you have to use the SetCPU profile settings along with the other settings.
Sir-Lancelot said:
I'm not 100%, but this should be what to do...
In the app Tools/Profile/hit the + tab/tic select all or ?/ and it creates the settings profile
This part I'm willing to test with you. In your file explorer app go to the root tab.
/data/data/com.grarak.kerneladiutor/files/profiles.json
This is the profile you created. I'm assuming if I placed your file in the same folders on my device I would see the profile you created.
Sent from my LG-VS985
Click to expand...
Click to collapse
I will be uploading a update with that file added!
MaddMaxx636 said:
I will be uploading a update with that file added!
Click to expand...
Click to collapse
Alright Bro, I see it and I will see how it goes.
Will let you know.
Sent from my LG-VS985
Can't seem to get the settings to apply. The profile is found in the app but nothing I try will apply.them. open to suggestions as I am out of them at the moment
Lance
Sent from my LG-VS985
Sir-Lancelot said:
Can't seem to get the settings to apply. The profile is found in the app but nothing I try will apply.them. open to suggestions as I am out of them at the moment
Lance
Sent from my LG-VS985
Click to expand...
Click to collapse
I would use the Trickster Mod settings because i know they work!
Also ill be uploading a update tomorrow or tomorrow night with much needed updates and ill take a look at other apps settings files. I would get the trickster mod donate app if all else fails!
What's your DPI at in the screenshot from OP? Looks perfect! Also, what ROM did you use?
xocomaox said:
What's your DPI at in the screenshot from OP? Looks perfect! Also, what ROM did you use?
Click to expand...
Click to collapse
What i did is i used a app called NOMone Resolution Changer to change the resolution to 1080p with the DPI to 320. Putting the resolution to 1080p helps in battery life and proformance!
I'm running CM12.1! Check out the JediROM! Its by the same dev that made the kernel! I don't use it but its still a great ROM! I prefer CM12.1 [I make the kernel settings]
https://play.google.com/store/apps/details?id=com.nomone.resolution_changer&hl=en
I hope this link works!
MaddMaxx636 said:
What i did is i used a app called NOMone Resolution Changer to change the resolution to 1080p with the DPI to 320. Putting the resolution to 1080p helps in battery life and proformance!
I'm running CM12.1! Check out the JediROM! Its by the same dev that made the kernel! I don't use it but its still a great ROM! I prefer CM12.1 [I make the kernel settings]
https://play.google.com/store/apps/details?id=com.nomone.resolution_changer&hl=en
I hope this link works!
Click to expand...
Click to collapse
Ah, yes. I've used that many times. Prefer to stay on 1440p due to the extra crispiness of the small text, but I have seen some small battery savings doing 1080p.
Thanks for your setup, I am playing around with it to tweak to my liking.
xocomaox said:
Ah, yes. I've used that many times. Prefer to stay on 1440p due to the extra crispiness of the small text, but I have seen some small battery savings doing 1080p.
Thanks for your setup, I am playing around with it to tweak to my liking.
Click to expand...
Click to collapse
Please don't re-release these files as your own! Thats awesome that your enjoying the files!
What are you tweaking?
MaddMaxx636 said:
Please don't re-release these files as your own! Thats awesome that your enjoying the files!
What are you tweaking?
Click to expand...
Click to collapse
It will all be for personal use.
CPU Profiles and your voltage settings.
xocomaox said:
It will all be for personal use.
CPU Profiles and your voltage settings.
Click to expand...
Click to collapse
What are you changing in the CPU Profiles? They are set up perfectly! (in my opinion)
What have you changed in the voltages? Ill be uploading a updated version with voltage updates and CPU Profiles updates soon! Hopefully tomorrow
THIS THREAD IS MOST LIKELY DEAD SINCE I MOVED IT INTO THE MAIN LG G3 DEVELOPMENT PAGE!!
NEW LINK http://forum.xda-developers.com/lg-g3/development/kernel-settings-nebulakernel-rev10-2-1-t3258520
USE AT YOUR OWN RISK!! MIGHT NOT WORK FOR ALL G3!!
MAKE BACKUP OF YOUR DEVICE BEFORE USING THESE FILES!!!
Please Do not change or mod these settings or re-release them! If you do i will hunt you down and murder your favorite pet and turn them into a nice steak or i'll just have to hunt you down and ding dong ditch your house > [That was a joke......]
This thread is for setting i made for the LG G3 Verizon Wireless (vs985)
These settings are to be used with SetCPU and Trickster Mod (You'll need Trickster Mod donate pack to restore the Trickster Mod backup settings)
These settings .zip are not flashable. You will need to unzip the pack ON DEVICE.
PACK includes:
SetCPU profiles:
Multimedia - Other, Multimedia - Photos, Multimedia - Music, Multimedia - Video, Multimedia - Camera, Emulator- MyBoy!, Social, Google Chrome, GPS Navigation and Maps [ACTIVE], Phone/Contacts, HIGH TEMP!! 170+oF+!!, Games (HD-Large), Games (HD-Small), Charging (AC/USB), Screen Off, Everyday Use. Those are the profiles in the SetCPU pack. They are still being tweaked! Every Profile is different and might have different governors and I/O Schedulers
Trickster Mod Setting: EXTREME Undervolting, On_demand Governor tweaking, minfree_Control (RAM Management), 1512 i/o fiops BOST SDCARD AND INTERNAL STORAGE,Sound controls and some other awesome things! They are still being tweaked!
Install directions for these files:
1. Download the .zip file from this page
2. Unzip pack
3. Put the LG G3 CM12.x NebulaKernel 10.3-T2 [1.0] [3.03GHz].setcpu.json in the root of your onboard SD card partition. SetCPU will find the files on its own when you go and restore it
4. Put the LG G3 (vs985) CM12.1 NebulaKernel 10.3-T2 3.03GHz [11-21-2015] file in the tm_profiles folder in the onboard SD card partition.
Then go into Trickster Mod and touch restore and select the latest version of the files
5. Change your DPI to 350 because it will make the 1440p display look beautiful and perfect and like it should look! For some reason i cant get the system to change the resolution to 1080p anymore. I guess something in CM12.1 messed that up but what ever!
6. ENJOY THESE FILES and you're instantly AWESOME LG G3!
I do not take ANY credit AT ALL for the making of the kernel! I did not build the KERNEL! All credit goes to @Eliminater74 !
These settings ONLY work on the NebulaKernel 10.3-T2l! If you use the Trickster Mod Settings on any other kernel the device will crash and boot loop These settings have only been tested on The Verizon LG G3 model. I do not know if they work on any other model because i do not own them
DOWNLOAD THIS BADASS KERNEL FROM THIS BADASS DEV!
Kernel link: http://forum.xda-developers.com/lg-g3/development/kernel-nebulakernel-rev6-5-build20150715-t3161768
GeekBench scores!
1. Single-Core: 1010 | Multi-Core: 3177
2. Single-Core: 1080 | Multi-Core: 3255
3. Single-Core: 1060 | Multi-Core: 3300
4. Single-Core: 1070 | Multi-Core: 2433
DO NOT DOWNLOAD AND USE [V1.0 STABLE-RELEASE] IT IS NOT STABLE OR USABLE FOR DAILY USE! USE THE NEWEST VERSION AVAILABLE
CHANGELOG
11-21-2015: [V1.0 STABLE-RELEASE]
1. Release of Pack! YAY!!!
2. I had to make some voltage changed to the 3.03GHz step for it to be stable for me! I have to raise the voltage up from 1225 to 1228. So far it's been very stable! Everything is undervolted beautifully!
3. Most of the Governor settings and SetCPU profiles are ported from the Jedi Kernel settings pack but with minor changes like adding per profile I/O Schedulers
11-22-2015: [V1.1 STABLE]
1. SetCPU: I changed Everyday Use MAX cpu freq from 3GHz down to 2.88GHz because 3GHz isn't stable yet. I'm still working on the voltage for it.
2. Trickster Mod: Tweaked voltages to make the device more stable. They aren't perfect yet!
3. Trickster Mod: Tweaking the OnDemand governor for get the highest performance from the 801 CPU.
4. Trickster Mod: Changed GPU governor from Simple-ondemand to msm-adreno-tz because i seem to get better performance with that!
5. If anyone can tell me how to export/backup Kernel Adiutor settings that would be awesome!
11-23-2015: [V1.2 STABLE]
1. SetCPU: Changed Max freq on charging AC/USB from the lower 2.4 to the higher 2.4GHz
2. SetCPU: Changed Max freq on Camera profile to 2419 and changed the governor to ondemand. For better 4K recording.
3. SetCPU: Changed Max Freq on Multimedia-Other to 1574
4. SetCPU: Multimedia-Music Max freq from 1958 to 2265
5. SetCPU: Multimedia-Video Max Freq from 1728 to 1958
6. SetCPU: Google Chrome Max freq from 1958 to 2268 (this profile only supports Chrome Beta)
7. SetCPU: Phone, Contacts Max freq from 806 down to 729 (Trying to see if i can get lower temps in phone calls)
8. Trickster Mod: Changed GPU freq from 657MHz up to 700MHz (This might not work for all! It works PERFECTLY for me!)
9. Trickster Mod: Not sure if this in the today's build but i made some sound settings changes! You might want to change them to your liking!)
10. Trickster Mod: Tweaked some voltages! Trying to have them as low as possible but keeping full stability!
11. These updates will most likely be uploaded everyday!
11-26-2015: [V1.3 STABLE]
1. Trickster Mod: I Tweaked the voltages! I haven't had any crashes unless i try to lower the voltages! So i might have found the perfect voltages for this phone!
2. Trickster Mod: I changed the hotplug from MPDecision to MSM MPDecision because i am getting better proformance with that hotplug. I put a picture of the settings i used in the newest post! Please see them to change your settings in Kernel Adiutor.
3. Trickster Mod: You will need to change the CPU governor Settings manually to the tweaked ones. Change them to 0.2. If you see BS Logic.....Well it speaks for itself! DONT USE IT! IT'S GARBAGE!
4. Trickster Mod: I tweaked the GPU settings See newest post for what to change them to in Kernel Adiutor.
5. SetCPU: I added a low Battery profile today! It will enable when your battery drops before 19% because Android tells you that your battery is low at 15% it's to catch it before it Starts its BS lol
6. SetCPU: I reorganized the profiles! I put screen off on the top of everything else so when you are playing music you can the Screen Off profile enables to save battery life and so on.
7. SetCPU: I also tweaked some profiles but i forget what i did or to what. I've been busy lately so i forgot.
8. I changed my DPI from 330 to 350 and i've been getting WAY better proformance! So that's awesome
9. I got 3 1/2 hours of SOT.
10. I also changed my kernel from the testing version to the more stable version but these settings work on both. You will need to use the stable kernel that supports the 3GHz CPU OC and the 700MHz GPU OC for them to work!
11. Also happy thanksgiving to my fellow Americans and belated happy thanksgiving to my Canadian friends which i have very little about you friends in either! -______-
12. I changed the names to some of the files and the .zip pack
Please report back after updating!
If you encounter any device crashing please tell me
Thanks
new update!
new update!
new update! Happy Thanksgiving!
This is a thread post that goes alongside with the newest version V1.3 STABLE from 11-26-2015.
These are things that you have to set manually yourself!
In the first picture of the Hotplug settings please make sure the minimum cores online is set to one! That was a mistake i made before taking the screenshot! I was scrolling and must have dragged it to 4 somehow
Woooow thanks hermano
mataflakitas said:
Woooow thanks hermano
Click to expand...
Click to collapse
For what?
For thread ...
mataflakitas said:
For thread ...
Click to expand...
Click to collapse
Thanks! I work hard on this stuff to help people get the most out of their devices using awesome kernels!
MaddMaxx636 said:
THIS THREAD IS MOST LIKELY DEAD SINCE I MOVED IT INTO THE MAIN LG G3 DEVELOPMENT PAGE!!
NEW LINK http://forum.xda-developers.com/lg-g3/development/kernel-settings-nebulakernel-rev10-2-1-t3258520
Click to expand...
Click to collapse
As this is what the OP has stated, there's no need to keep both open.
Please use the thread linked above for any further conversation.
Thread closed.