Acid Audio V7 Functional, Boosts Audio Volume In CM10.1 higher than Stock - 7" Kindle Fire HD Themes and Apps

Well, as for the audio. You should download and install acid, it has latest beats drivers, lots of Acid aditions including xloud. Its universally compatible, and is the best audio mod around.
Im currently downloading this rom at snails pace because of Goo.im. Would have much preferred a Dev.Im link as they are never slow, or even an android hosting link as you can select a server. Im sitting at 20 minutes waiting for this rom with a 60mb down internet connection...the file is 160MB so... I should have this in 21 seconds.
Ill let everyone know if acid works >.> I mean if that hasn't been done yet.
ACID AUDIO INSTALLATION:.........................INSTALLATION METHOD BELOW!!:
1. Download went fine......................................Download: http://forum.xda-developers.com/showpost.php?p=38599629&postcount=1005<- download 2805, 2802AOSP3
2. flash went fine.............................................. Flash 2802AOSP3, Followed by 2805.---WIPE CACHE AND DALVIC BEFORE REBOOT
3. Booting Successful.......................................Y our done by now
4. Acid Audio Functional...................................It works, and yeah tested and stuff
5. Noozxoide Eizo-Rewire Functional...............Download from play store, Install, change settings for Built In audio monitor to below
------------Noozxoide Personal Config----------------
1. Set noozxoide xlimiter processor soft clipping to enabled, set effect strength to moderate.
2. Enable the PsychoAcoustic Processor, set effect strength to medium (( OO ))
3. Enable Natural Soundstage, Premium Bass.
4. Set EQ to Unique III
5. Enable Noozxoide Volume Enhancement Engine, set effect strength to strongest.
6. Enable VSUR Virtual Surround
7. Set Room Size to Studio II
After Settings Configuration Review: Audio about 50% louder through speakers. Audio 100% louder through headphones. Speaker Quality improved by 30% over stock Amazon Rom. Headphone Quality Improved by 200% through descent headphones. Beware, this pushes your Speakers to the Maximum they can be, Could be far too awesome for your brain to handle.
Acid Audio V7 Revisions:
Quote:
Version 7 ics+
● Rebuild once-again after my old beats audio version 5
● Optimize for every devices
● Should work on all AOSP roms
● Stable
● New library files
● Latest Beats Audio files
● Removed ALSA
● SRS with Surround sound
● WOWHD BASS enabled
● SRS_WOWHD values tweaked (clean reverberation)
● SRS CHSP EQ and Compression tweaked
● New Clearaudio Engine JB from sources
● Clearphase is now effective
● New Downmix lib with tweek 4 crispier sound
● New snd pcm cards for better audio rendering
● New resampling libs and tweaks (48khz)
● Deep and Clear
● Cristal Voice ( JB clearaudio +)
● Louder volume
● Awesome Sound, Powerfull and Deep Bass, Clear Audio, Cristal Voice, Clean Sound without distortion
● Awesome beats
● NEW ACID AUDIO FILE TO CHECK WHETHER THE IMPORTANT TWEEKS ARE LOADED CORRECTLY
● Removed unwanted files
● Optimized configuration files
● More Equalizer Presets
● etc etc............................................... ......
ALSO!!: [email protected] AmrBanawan for the last step.
Thanks igotlostintampa, Works beautifully, but just so you know, After i flashed the 2 files, I wanted to make sure its working so i opened terminal emulator and entered these commands like in the AC!D audio engine thread
Code:
su
mount -o rw,remount /system
aaengine
Click to expand...
Click to collapse
Anyone mind if I upload this to google drive when its done to cut out the slow DL? jus tryin ta help. Just as like a mirror link er something.
Click to expand...
Click to collapse
I Figured since there wasn't a lot of roms, a lot of people didn't know about this or if it worked. This is my Post from the CM10.1 rom, just helpin out.

---

igotlostintampa said:
I Figured since there wasn't a lot of roms, a lot of people didn't know about this or if it worked. This is my Post from the CM10.1 rom, just helpin out.
Click to expand...
Click to collapse
oh god, i say this before cm for making better stock audio, but it didnt worked, in cm it works !!!!! i think amazon modified a lot of thinks, obiusly, this is better than stock sound because the improvements it has

---

persano said:
oh god, i say this before cm for making better stock audio, but it didnt worked, in cm it works !!!!! i think amazon modified a lot of thinks, obiusly, this is better than stock sound because the improvements it has
Click to expand...
Click to collapse
lol yeah it should work with any AOSP rom. Stock Roms have a bit more tinkering that needs to be done before it will work, but its definitely possible. I found CM10.1 lowered the stock volume wayyy to much, so I installed acid and Noozxoide and it boosted it to where I need it. But yep it works great!

---

igotlostintampa said:
lol yeah it should work with any AOSP rom. Stock Roms have a bit more tinkering that needs to be done before it will work, but its definitely possible. I found CM10.1 lowered the stock volume wayyy to much, so I installed acid and Noozxoide and it boosted it to where I need it. But yep it works great!
Click to expand...
Click to collapse
obiusly, i made a thread some time ago about the v5 for the stock, but it dint work well, i know this work better than stock amazon os sound, the speakers work the same and the sound has more quality thanks to all the v7 acid audio engine bring

---

persano said:
obiusly, i made a thread some time ago about the v5 for the stock, but it dint work well, i know this work better than stock amazon os sound, the speakers work the same and the sound has more quality thanks to all the v7 acid audio engine bring
Click to expand...
Click to collapse
yeah v5 was a little messed up anyways and he says that in the V7 revisions if you look close enough. v7 is how v5 was supposed to be with a few upgrades. Gotta love the team though, I have acid audio on any device I own at all times.

---

Thanks igotlostintampa, Works beautifully, but just so you know, After i flashed the 2 files, I wanted to make sure its working so i opened terminal emulator and entered these commands like in the AC!D audio engine thread
Code:
su
mount -o rw,remount /system
aaengine
you didn't put this step in your installation method, Are you sure it wasn't necessary?

---

AmrBanawan said:
Thanks igotlostintampa, Works beautifully, but just so you know, After i flashed the 2 files, I wanted to make sure its working so i opened terminal emulator and entered these commands like in the AC!D audio engine thread
Code:
su
mount -o rw,remount /system
aaengine
you didn't put this step in your installation method, Are you sure it wasn't necessary?
Click to expand...
Click to collapse
It wasn't necessary on my end for the volume boost nor the quality however that could have been due to my excitement with Noozxoide. Ive run and will update the OP just in case. Thanks a bunch

---

igotlostintampa said:
I Figured since there wasn't a lot of roms, a lot of people didn't know about this or if it worked. This is my Post from the CM10.1 rom, just helpin out.
Click to expand...
Click to collapse
Just wanted to say this made a huge differance
Sent from my Amazon Kindle Fire HD running CM 10.1

---

Does the Android is upgrading screen really takes long when it says starting apps?
EDIT: Oh nvm, I downloaded the wrong 2082 (stock one). UGH DAMMIT
2xEDIT: Working! The sound quality is way better now!

---

Thanks igotlostintampa and persano for verification.
This works great! Can't wait till cm10.1 is finished. I'm amazed at what my Kindle has become. Thanks for everyone's hard work!

---

bbanghyung said:
Thanks igotlostintampa and persano for verification.
This works great! Can't wait till cm10.1 is finished. I'm amazed at what my Kindle has become. Thanks for everyone's hard work!
Click to expand...
Click to collapse
i want it finished too
Sent from my KFTT using xda app-developers app

---

Do not install this if you are running jbkred's ParanoidAndroid rom, It will break its interface and you are only left with a black screen and nothing to do!

---

AmrBanawan said:
Do not install this if you are running jbkred's ParanoidAndroid rom, It will break its interface and you are only left with a black screen and nothing to do!
Click to expand...
Click to collapse
Thanks ahead, was barely going to install, you have any idea why though
Sent from P.A.10.1 using Tapatalk 4 beta

---

AmrBanawan said:
Do not install this if you are running jbkred's ParanoidAndroid rom, It will break its interface and you are only left with a black screen and nothing to do!
Click to expand...
Click to collapse
Actually don't install with Hashcode's cm10 either. I get no sound out of youtube and I have HUGE lag.

---

DroidIt! said:
Actually don't install with Hashcode's cm10 either. I get no sound out of youtube and I have HUGE lag.
Click to expand...
Click to collapse
Sent from P.A.10.1 using Tapatalk 4 beta

---

I've noticed certain glitches when using it with Jester6's TabletUI ROM also, I'd stay away from it really.

---

It works perfect for me. I actually was going for Viper but couldn't get it to work (CM 10.1).
Did you guys wipe cache and dalvik cache before and after flashing?
Sent from my LG-P769 using xda app-developers app

---

Protomartyr said:
It works perfect for me. I actually was going for Viper but couldn't get it to work (CM 10.1).
Did you guys wipe cache and dalvik cache before and after flashing?
Sent from my LG-P769 using xda app-developers app
Click to expand...
Click to collapse
After, not before. Couldn't get VIper to work on CM 10 either as the audio driver for the FX app doesn't initialise. Acid does work, it just seems a bit glitchy at times.

---

Yeah I was reading the instructions on the original Acid thread , and it said to do a wipe before and after. Might sound trivial but it's worth a shot.
Originally Posted by ilya404
1.Take nandroid backup
2. Wipe Cache and Dalvik Cache
3.Flash the downloaded file in CWM (First 2802 then 2805 then Clear Audio)
4.Wipe dalvik cache + Cache
5.fix permission in recovery
6.reboot your phone
7. Check buildprop and use terminal emulator to fix it (su[enter] mount -o rw,remount /system[enter] aengine)
8. Reboot

---

Katalystik said:
After, not before. Couldn't get VIper to work on CM 10 either as the audio driver for the FX app doesn't initialise. Acid does work, it just seems a bit glitchy at times.
Click to expand...
Click to collapse
Yeah, I wiped after. It booted ok on Hashcode's cm10, but I had no sound at all. Ended up flashing back to 7.3.1 stock to get my sound back and then back to cm10. Followed the directions to the t as I'm always really careful when trying anything new, but completely wiped my sound. I have seen endorsements for Viper but haven't wanted to try it after my experience with Acid. Think I'll just wait for a fix on the dev side of things.