Hey i have a t mobile galaxy s3 and i recently put hyper-drive rom on there but i didnt know that i wouldnt get 4g and i cant even send picture messages and my phone is like on overheat mode lol so i just wanna go back to stock!!!1! no root, no mods, just pure jb 4.1.1 like it was at first so if you can help me i gladly appreciate it
is your device name GT-I9305N ?
Click here: http://samsung-updates.com/device/?id=GT-I9305N and either download JB 4.1.2 or *4.1.1 (Stock)
Here is the stock one 4.1.1 from the ^^above site
http://hotfile.com/dl/178072704/acf...305N_COV_1_20120925093014_ny59ny64ie.zip.html
after you download the file follow
http://gs3.wonderhowto.com/how-to/r...sh-stock-roms-using-odin-for-windows-0142713/
(press thanks if i helped!)
nopeee
hey thats not my device model i have a tmobile one sorry so that wont work but thanks for trying to help
Download Odin Flasher and USB driver
Odin downloader Odin3_V3.07
hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
USB Driver Samsung SGH-T999 USB Driver
hotfile.com/dl/167907224/256bf74/T-Mobile_T999_GSIII_Samsung_USB_Driver_v1_4_6_0.exe.html
Grab the original stock ROM:
SGH-T999_TMB_T999UVALH2_T999TMBA
hotfile.com/dl/167751637/360216d/SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original.zip.html
Or the latest s3 jelly bean update (4.2)
hotfile.com/dl/179539523/d0bd79a/SGH-T999_TMB_T999UVDLJA_T999TMBDLJA_Original.zip.html
Odin Flasher Guide: T999UVALH2 Android 4.0.4 ICS Firmware on Samsung Galaxy S III SGH-T-999
Information from:
androidromupdate.com/2012/08/25/restore-back-t-mobile-samsung-galaxy-s3-sgh-t999-back-to-original-ics-4-0-4-t999uvalh2-stock-firmware/
1) “Extract” or “unzip” the downloaded stock ROM to get the .tar.md5 file.
2) Run Odin3_v3.07.exe
3) In Odin - DO NOT CHECK the RE-PARTITION checkbox, only both ‘Auto Reboot’ and ‘F-Reset’ left checked.
4) Click on the PDA button then browse to the folder where you extracted the stock ROM
T999UVALH2_T999TMBALH2_T999UVLH2_HOME.tar.md5 file.
5. Reboot the phone in download mode: To reboot the Galaxy S3 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
You’ll then need to press the Volume Up to continue. You’ll be prompted into a warning screen and asking you to press “volume up” if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
5) Once the phone in download mode screen, connect the PC USB cable To Phone. The highlighted ID:COM box is and indication that the device is connected properly to PC. If you still do not get any results, try another USB port on your computer.
6) Click the Start button to begin flashing.
7) Wait until it finishes or watch out for the word “PASS”.
Once the phone completely reboots, perform wipe/factory reset to get a fresher firmware installation.
1. Hold Power and Volume Up together, this will switch the device into recovery mode.
2. Release Power after holding it for a second but continue to hold the Volume Up button until recovery menu appears.
Select wipe cache
Select wipe data/factory reset.
Select reboot
That’s all! your Samsung Galaxy S III SGH-T999 now fully restoredstored
Related
Hi ,
by mistake i deleted all ROM's and i am in recovery mode without any ROM< to install . i tried to connect it to my PC to see if i can put it via USB new ROM but dont see nothing in my computer . any advice what i need to do ?
put the tab to the download mode and use odin. It should work
Boot your Tablet into Download Mode (Press and hold the Power and Volume Down buttons, when turn on Release the Power button but still hold the Volume Down button. then Volume Down Button Navigates Volume Up Button Selects)
Plug your Tablet into your PC and wait for it to connect.
open ODIN3_v1.85.exe
Select the PDA Button and then select the P7510XABKMP_P7510UEKMP_HOME.tar.md5 file (find in sammobile page or google search)
Hit Start and that process should take a couple minutes as it will put your Tablet back to the Factory ROM and Recovery and Kernel Images.
After it finishes it should reboot.
Questions go in the Q&A section
I tried rooting my Samsung Galaxy S2 phone by following the steps below:
■Step one: First of all make sure that you have download and install all the needed software. Then, Put device in USB debugging mode: Settings ->Applications -> Development -> USB debugging.
■Step Two: Reboot your device in the download session mode. To get enter in the download mode of Samsung Galaxy S2, switched off the device and turn it on again by holding Volumedown button + Home button and Power button simultaneously. You will surely reach to the download mode. You can get yourself confirm by identifying same as below mention picture as on your phone screen.
■Step Three: Open the ODIN Downloader which you had downloaded and installed it on your pc.
■Step Four: Now, with the help of USB Cable connect the device to the computer while keeping the Odin open then wait for the few seconds then odin notified you that the device is connected to the computer. Select the checkboxes next to “Auto reboot” and “F. Reset Time” and kept default else options. After all this, press “PDA” Button and select the XWKDD_insecure.tar file which you have downloaded on your pc before. Now Press “Start” button, after this pressing the start button ODIN will flash the kernel and after flashing it phone will reboot. Becareful, don’t dare to disattach the device from computer while rebooting.
■Step Five: Once the device has been restarted, Open SuperOneClick and press the “Root” tab and restart the device again. After it, you will successfully rooted the your Samsung Galaxy S2 device.
However after rooting the phone, I receive the following message :
Failed to encrypt data.
and I could not access my phone home sceen. Please advice how to resolve this issue. Thanks a lot
Hi guys,
I just used Download Mode + Odin to push T110.CWM.v6.0.4.8.tar.md5 to my T110 Tablet.
After that I could boot into CWM-based Recovery v6.0.4.8 without issues.
Then I installed the zip file android-armeabi-universal-root-signed.zip
After that I rebooted. And since then I was not able to boot into Android or even Download Mode.
Only Recovery Mode works.
Then I tried to run adb devices from Windows and it reports my device ID number + recovery.
Now I was hoping somebody could help me with some adb commands to get this thing working again.
My initial goal was to root and upgrade from 4.1.2 to 4.2.2.
I would prefer using this lite rom T110UEUANE4.LiteV2.Rooted.Deodexed.June2014.zip instead of the official rom T110XXUANG2_T110OXAANG2_XEO.zip.
But at this point I would not care to much, I just hope it can be fixed again
Many thanks for your help!
How to unbrick your Samsung Galaxy Tab 3 Lite SM-T 110
Things to download:
stock kitkat rom: sammobile.com/firmwares/download/32777/T110XXUANG2_T110OXAANG2_XEO/
Odin: androidhost.org/get/PVAIv
Installation instructions:
1. Extract both zips onto your desktop.
2. Start the odin application.
3. Turn off tablet, and hold -volume button, the home button, and the power button at the same time.
4. Release power button once the tablet turns on but hold the home an the -volume button down.
5. Once transferred to new screen accept warning by pressing the +volume button.
6. Connect your tablet to your computer and wait for Odin to recognize your device.
7. Once recognized, click AP and navigate to the extracted kitkat stock rom MD5 file.
8. Wait about 5 minutes for Odin to check the file.
9. Once odin checks the file make sure to only have Restart and f. reset time checked in the options.
10-1. Click start and wait for installation. to complete.
10-2. If you cannot get to the start button, press tab until you are at the start button and press enter. Start button is at the bottom left.
11. Tablet will restart automatically and you are done.
Quick note: you just learned how to recover from a soft brick.
Hello guys, today i get my friend's old Samsung galaxy ace duos SCH-i589..& this is my first samsung device to be looking for development in xda (i personally avoiding samsung). I thought that all samsung devices have good xda support but from my searching on google shows that it has almost nil support.. I even can't find proper forum for installing cwm in this device..Now i think what i found from diverse locations should be put in one place.
NOTE: I am not a developer nor below is my work..i would like to all those members who made it possible.
Running from stock rom, i can root this device from the below files:
update.zip
root Instruction:
1. Download & copy the below attached "update.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "update.zip".
6. Yes
7. Done
now to unroot this device after rooting:
unroot.zip
unroot Instructions:
1. Uninstall all [Root] apps.
2. Download "unroot.zip"
3. Turn off your phone.
4. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
5. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
6. Select "unroot.zip".
7. Yes
8. Done.
Caution : Both files are related to each other, If rooted with "update.zip" from here then only use "unroot.zip"
Clockwork mod recovery
Now temporary cwm which can do any cwm task but u have to load it everytime.
CWM-6102.zip
cwm instruction
1. Download & copy the below attached "CWM-6102.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select CWM-6102.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "CWM-6102.zip".
6. Yes
7. Done
8. This has to be done every time you want to load cwm recovery.
Now i haven't tested beyond that but i found a youtube link for flashing stock rom via odin
https://www.youtube.com/watch?v=4ChtmNtpk3c
but this is in spanish so i translated in english here..
You must install Samsung KIES to ensure that your PC detects your phone.
After downloading install Odin
1 - Restart the phone in Download Mode ( Vol down , Home, Power Simultaneously ) .
press volume up to continue ( or vol down to leave but it can damage... )
2- Start Odin
3 - select files and press Start
Watch Out !!! Never unplug your phone before restarting
After 5-10 minutes your phone will reboot to your new ROM
stock rom download below:
link:http://www.mediafire.com/download/z7t1yz9c615ebj1/rom+sch-i589.zip
Thank you very much! Although my SCH-i589 is currently hard brick, I think it will be very useful! -- Greetings from new members after 8 years
i have come to this problem after updating my galaxy s6 G-920F, but relax its just a wrong kernel flashed [soft brick].All you gonna do is to flash correct kernel of G920F (file attached)
PROCEDURE:
1. turn off your phone and turn it on in download mode by pressing (volume down + power button +home button) then u gotta press the volume up button when u see the warning icon,good u are in download mode.
2.fire up the odin and put the kernel file in AP section.
3.connect your phone to the computer using datacable make sure u have drivers installed,once you are connected successfully you will see the blue com port in odin
4.its time to flash the kernel go with it flash it and it will reboot itself.
5.when you are booted into phone which is gonna take 5-10 minutes Dial *#2663# in the dialer and update the thouch screen panel firmware by selecting 'TSP FW update (General)' button
6. it will take few seconds and your touch will be ok https://drive.google.com/open?id=0B-00h4ZX1Fe7SVZOQUhaV3dyOTA