i just installed the rom ★ [Rom][I605VRAMC3][4.1.2] Stock Root Odex/Deodex [05/02/13]★ on my note 2 verizon phone, and i cannot turn off the keytones, i mean its set to off, but still clicks when i type making that obsesant noise, how can i fix that, is there a way to do it, or modify the features.xml or any way to shut off the beeping when i type?
i installed the deodexed version
Goto settings language and input click the settings icon for samsung keyboard then goto the keystones/feedback and uncheck it.
See if this does the trick
Related
1) Can you use the tab as a phone? With a dailer? (SIM dialer, not skype)
2) Do you have to root/cfw it?
3) Regarding firmware issues: If I wanna change the lock screen (sliding for extra options like silent, music, messages etc.) - can this be done with apps or must be done at the firmware level - aka, root/cfw ?
anyone?
advocator said:
1) Can you use the tab as a phone? With a dailer? (SIM dialer, not skype)
2) Do you have to root/cfw it?
3) Regarding firmware issues: If I wanna change the lock screen (sliding for extra options like silent, music, messages etc.) - can this be done with apps or must be done at the firmware level - aka, root/cfw ?
Click to expand...
Click to collapse
1. with Honey Comb NO, there are some hacks in which you might have to downgrade to froyo, there is a thread you can check it out in xda
2. yes check the sticky thread under samsung galaxy tab 10.1 android development sub-forum
3. i am also trying till now i havent succeeded
HI,
As it seems my sgs2 have some hardware problems with wifi -> when I try to activate/deactiva it, the state freezes, but phone stil works normal (without wifi offcourse). Now the wifi status is enabled and every time I tried to deactive it, process "android system" freezes. Also when I turn off/reset phone the wifi is still enabled (remember the settings from before somehow) or in the midle state (turing off).
So my question is: where I can set wifi to stay off when you turn phone on (.conf file maybe) So when the phone is turned on, wifi won't be activated.
I don't want to do factory reset yet.
Tnx
I backup with clockworkmod, then do the system reset and restore back only the data and still the same
If I only do the system reset then wifi in disabled. THIS IS OK, but I have to install all apps and do much settings.
So I really appriciate it if someone know hot to disable wifi on boot?
I also try to add some lines in file /system/build.prop to disable wifi, but without success
Looks like you need to do a full reset and a clean flash...
look into chainfires thread in i9100 original Android Dev section, find the firmware for your phone and flash away
Sent from my GT-I9100 using xda app-developers app
Tried to flash it with this offical firmware I9100XWLPT (4.0.4):
http://forum.xda-developers.com/showthread.php?t=1544487
But the wifi stil can't be activated! I install program alogcat and that error appear a lot of times: "supplicant not running, cannot connect"
So I'm back to my old stable version 2.3.5.
I only need to figute out how to disable wifi, so the phone will work normal
goldy1234 said:
Tried to flash it with this offical firmware I9100XWLPT (4.0.4):
http://forum.xda-developers.com/showthread.php?t=1544487
But the wifi stil can't be activated! I install program alogcat and that error appear a lot of times: "supplicant not running, cannot connect"
So I'm back to my old stable version 2.3.5.
I only need to figute out how to disable wifi, so the phone will work normal
Click to expand...
Click to collapse
it's obvious to be a SW problem
just make a full wipe ( wipe cache,data/factory reset,dalvik cache ) and try to install a new rom like sensation .. i've tried it and it's really stable and everything should be working well with u
if this fails .. so take it to service center
or you could use titanium backup, first nav. to apk folder and copy paste wifi apk's, two i think, into a new folder then delete the apps using tb then wipe dalvik cache reboot let it redo app optimisation this will put apps allready installed on then reinstall wifi apk's. failing this as evryone says below.
Still don't know my main question:
Where I can set wifi to stay off when you turn phone on (.conf file maybe) So when the phone is turned on, wifi won't be activated.
goldy1234 said:
HI,
As it seems my sgs2 have some hardware problems with wifi -> when I try to activate/deactiva it, the state freezes, but phone stil works normal (without wifi offcourse). Now the wifi status is enabled and every time I tried to deactive it, process "android system" freezes. Also when I turn off/reset phone the wifi is still enabled (remember the settings from before somehow) or in the midle state (turing off).
So my question is: where I can set wifi to stay off when you turn phone on (.conf file maybe) So when the phone is turned on, wifi won't be activated.
I don't want to do factory reset yet.
Tnx
Click to expand...
Click to collapse
This looks like kernel issue.
Try to change your kernel to a custom one.
Personally, I'll recommend Siyah or Speedmod
Swyped from my Samsung Galaxy SII
Tried different kernels, but I got HW issue!
Found something useful, but this is can be done after boot:
Use Android Terminal Emulator and enter:
svc wifi disable
Finally!! I find the solution:
I have to edit this file: (I use app aSQLiteManager and aShell to edit .db file)
/data/data/com.android.providers.settings/databases/settings.db
Inside database file is a table called secure and the field wifi_on has to be changed from 1 to 0.
After reboot wifi was disabled.
You could do that if you phone has hardware issues with WIFI module. Otherwise Andoid OS is very unstable.
Hi, i have a question. If my database file called secure doesn´t have wifi_on field? .... just i have to add the field or what? thanks
For some strage reason TTS settings missing from Android 4.0.4 installed on
Lenovo A789 device (223 firmware). Is there an option to enable settings menu or adjust TTS settings using some other way ? Google TTS files seems to be present in firmware - but I would like to replace Google TTS with SVOX version and as well to be able to choose language to use. In third party software built with TTS support if I press "TTS Settings" button - application just crash.
I found quite a few posts with similar issues on different devices running Android 4.0.x - but no solution posted so far.
System TTS settings suppose to be located in System settings -> Language and Keyboard settings but no TTS settings available there for my device...
By coincidence, while not trying to, I found out how to get them back. I will try and build this into my next ROM for A789, though I make no hard promises
restoring tts settings back in place
cybermaus said:
By coincidence, while not trying to, I found out how to get them back. I will try and build this into my next ROM for A789, though I make no hard promises
Click to expand...
Click to collapse
Hello cybermaus, I'm facing the same issue on a different device.
Would you mind to share the way you found to get them back?
It might apply on other devices as well...
thanks a lot!
Davide (aka blackdir)
try this
i have a problem with lenovo a789 and i don't know please help me
I have a problem with my lenovo a789. when I'm using the phone works great but when I leave it idle phone starts to reboot. I have installed the original rom 221 223 227 228 and the phone remains the same. someone help me
Ive been working on a MOD SecSettings.apk for Sprint Samsung S5 where I got Download Booster working and then was able to get the Settings to show the option for immediate access to use as well. In doing this for some reason, it lost the System Update option to go in and select PRL/Profile updates. I'm able to MOD back in the options anywhere into the settings but clicking on those options has no click effect. How do I go about adding back in the action effect for these two options through apk? Need location of where to add and preferably the command line needed such as "<action android:name="android.intent.action.MAIN" />".
After the first phone launch, few buttons are enabled like, GPS, MOBILE DATA, SYNC by default.
I want to edit the file responsible for these buttons and disable them by default.
Any idea which file should I edit?
I wonder what this option looks like: GPS.toggle.enabled=true/false?
in general in all the roms you can configure the toggles to remove or add options
first of all what android version do you have?
its custom rom based on 4.1.2 version
And i don't want remove/add the toggle. I want these buttons to be turned off (inactive) at the first phone launch. Need set it in system file permanently.
That if someone installs or full wipe this rom, gps and mobiledata will not be active. Like it is set somehow by default.
I really do not understand much of the subject if I deactivate for example Sync this will remain inactive even if I restart the mobile
* I hope that someone else can help you
Abels2 said:
I really do not understand much of the subject if I deactivate for example Sync this will remain inactive even if I restart the mobile
Click to expand...
Click to collapse
But is not after factory reset and setup wizard. GPS, Sync, and mobile data are enabled, I want to change it.
Now you should understand.
Which system file I have to edit to disable quicklaunch toggles button enabled by default after factory reset. Because I'm editing my custom rom
Its propably in SecSetting.apk or SecSettingProvider.apk
openforu said:
But is not after factory reset and setup wizard. GPS, Sync, and mobile data are enabled, I want to change it.
Now you should understand.
Which system file I have to edit to disable quicklaunch toggles button enabled by default after factory reset. Because I'm editing my custom rom
Its propably in SecSetting.apk or SecSettingProvider.apk
Click to expand...
Click to collapse
The only thing that occurs to me is that you make a backup of these files before returning from the factory, I understand that what you want to do will not be possible with the roms of samsung can with CM if
I found it
SecSettingsProvider\res\values\bools.xml
<bool name="def_airplane_mode_on">false</bool> so if i change it to true, airplane mode is enabled after factory reset. But i cant find mobile data and gps, propably i have to write new..
openforu said:
I found it
SecSettingsProvider\res\values\bools.xml
<bool name="def_airplane_mode_on">false</bool> so if i change it to true, airplane mode is enabled after factory reset. But i cant find mobile data and gps, propably i have to write new..
Click to expand...
Click to collapse
I think that if the airplane mode is activated, the data and gps are not activated
edit: no, just turn off the data you will have to find the place for GPS
I tried to add new line
<bool name="def_mobile_data">false</bool>
but thats not working
however on strings.xml
<string name="def_location_providers_allowed">gps</string>
if I delete "gps" and leave it empty its working, gps are off by default first succes
But I have not figured out yet how to disable data