{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SaberKernel This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.
Features
Kernel Version 3.0.96
UC to 100
OC to 1960
UV Support
Added Support For 3rd Party OC apps---
Advanced Power Emulation
Default Scheduler= Zen
Default Governor= Pegasusq
Default boot set to 1600
Built using arm 4.4.3 toolchain
Ramdisk Mods to support Custom Boot Animations
Boeffla Sound Support
Touchwake
GPU Control
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Andreilux
Faux123
Cmenard
Simone 201
Gregkh
Sarcastillo
supercurio
Der Teufel
Ezeekel
ZaneZam
Yank
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Nandroid
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
Downloads
SaberKernel_45.3- http://d-h.st/MkN
Support this Development By clicking this Button,,, Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation":
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
|KERNEL| SaberKernel_45.3 || 3.0.97 || UC-100mhz || OC-1960mhz || exFAT | 10|03, a Kernel for the Samsung Galaxy Note II
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2013-09-11
Last Updated 2013-10-03
mine
OOOooohhh , i wanted to ask on your n7100 thread if you were coming here
HIHI and thanks for kernel.. Seen rave reviews about it.
Is there any volume enhancer available? Voodoo is a paid only app right?
Cant seem to download the free version.. Play store says it is unavailable for my N7105
Downloaded n running nandroid will report back once flashed.
sent via Hondata FP + NOS
We're happy that you are here. I've been using this kernel, linked from the AT&T forum.
There is a voodoo app download available in my 7100 thread. Will add to this one asap
Sent from my SGH-T889 using xda app-developers app
Any risk to burn up the chip? works on cleanRom?
baxee said:
Any risk to burn up the chip? works on cleanRom?
Click to expand...
Click to collapse
I'm on CleanROM and this is my kernel.
Sent from my GT-N7105 using xda premium
Deleted..
sent via Hondata FP + NOS
http://d-h.st/pv8 - Voodoo app from OP's thread in 7100
Just flashed it.
My result with Quadrant and this kernel
Hi,
Thanks for the Kernel. It's a realy good one!
It's realy fast, stable (OC to 1800), liquid smooth.
No problems is stability tests with UV.
Battery life is on par with others (only Perseus gave me better battery life, but with some lag).
The sound is to high in my device, I think it was a lot better in terms os quality and laoudness with bloefa system present in other Kernels.
Charging times are also ok.
If possible, I would like to see the GPU UV table fixed in future releases.
Will stay with this one for some time.
Best regards
Hi,
Me again to report that, after a second charge cycle, I must say that your Kernel just Killed my battery! As I don’t see it draining anymore… No, just kiding, I'm geting a fantastic battery life!!!
So, I must correct my past sentence by saying that, until now, this kernel is at least on par with Perseus, if not even better… And, I’m on 1800 OC and without GPU UV (unable due to wrong values em mv).
Still prefer Boeffla sound and still have wrong values in GPU UV.
Once again thanks for your hard work.
Best regards
shadowlabs9 said:
Hi,
Me again to report that, after a second charge cycle, I must say that your Kernel just Killed my battery! As I don’t see it draining anymore…
I must correct my past sentence by saying that, until now, this kernel is at least on par with Perseus, if not even better… And, I’m on 1800 OC and without GPU UV (unable due to wrong values em mv).
Still prefer Boeffla sound and still have wrong values in GPU UV.
Once again thanks for your hard work.
Best regards
Click to expand...
Click to collapse
Did it just killed ur battery or what?!
baxee said:
Did it just killed ur battery or what?!
Click to expand...
Click to collapse
Hi,
No, Sorry, I've changed my past sentence...
Battery life is Fantastic!!!
Best regards
Kernel
After flashing this kernel... my SD card keep Unmount.. i cant mount my SD card
Any ideal that can solve this problem?
Loving the kernel, Works great, Solid performance and battery! Keep up the good works!
sckw said:
After flashing this kernel... my SD card keep Unmount.. i cant mount my SD card
Any ideal that can solve this problem?
Click to expand...
Click to collapse
I dont think this kernel has exfat support (correct me if i am wrong OP)
so if your sdcard is exfat then it wont work.
-Dan
Great kernel with Amnospherum Rom
Hi,
Thanks for this great kernel, flashed it this morning and it has been running without any issues.....smooth, zippy and no overheating so far. I flashed it with this new ROM(found it from the AT&T N7105 thread), prefect combination :
http://forum.xda-developers.com/showthread.php?t=2223984
Keep up the good work and hope to get more wonderful kernels from you soon.....
Related
[KERNEL][ExTweaks] SiyahKernel v2.6.14 | "One kernel to rule them all" | 3/19/12
NOTE: I (CWC3) DID NOT MAKE THIS KERNEL. I JUST TAKE CARE OF THIS POST. 110% OF THE CREDIT GOES TO GOKHANMORAL.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD HAS BEEN RETIRED | THIS IS FOR ANDROID: 2.3.4, 2.3.5, 2.3.6, 2.3.7
Developer: Gokhanmoral | Donate | Website | Original ThreadDownload: SiyahKernel v2.6.14 | ZIP | TARExTweaks - The Kernel Tweaker
2.6.14 (Latest):
Preempt_rcu
Xz compression (to reduce bw on the servers. other than that, don’t believe anybody telling you that it is faster)
New touch recovery (the one in my ICS repack) with gestures
GPU staycount implemented (this is the main reason of this release. this was droidphile’s request and I could not say no to him )
Disabled autogroup (samsung ICS kernel doesn’t use it neither)
ARM_ERRATA_754322 (once again, ICS has it)
Reverted workqueue implementation to old one
Some cleanup of redundant and non-necessary code
Reverted BFQ changes which were causing lags and lockups (thanks to Entropy512. I used the version in his repository. it was the easiest way )
Added “reboot into download mode” in advanced menu of CWM recovery and also added power-off back in. I had no time to remove dual-booting options. instead, I put “not implemented” message. they are ready but I am having a tiny problem while prompting user to choose the rom. you’ll have it in ICS, I hope.
Some fixes and corrections in extweaks interface (thanks to Entropy512 for some of them)
Initialization of led buttons to off (thanks to myfluxi)
Enabled cpu alignment (thanks to codeaurora)
Some other tweaks and “small changes”
2.6.13:
Fixed decoding issues because of the new cpuidle driver (thanks to Entropy512)
Set default I/O scheduler to deadline
Reverted lots of code back to v2.6.9 (based on the user experience, it is the best version until now)
Completed universal config interface implementation (the app will be posted when it is finished. the implementation at the kernel side is ready)
You may need to flash this in CWM recovery if you mess with the default config (especially when trying too much undervolting. although most of the settings are safe, changing gpu voltage and freq settings may cause lockups or bootloops): siyah-resetdefaultprofile.zip. this script will reset default profile and your device will boot with default settings.
This will be the last GB kernel release of SiyahKernel.
2.6.12:
Fixed BTHID issues (thanks to Entropy512)
Some wifi driver changes to prevent wlan_rx wakelocks preventing the device to sleep
New cpuidle driver from galaxytab (thanks to Entropy512)
Reverted top-off current back to default
2.6.11:
Replaced the recovery with Hyperdroid Redpill Kernel Recovery. (Thanks to Hyperdroid team and Redpill kernel developer(s)). this recovery can also mount both internal and external sd. (thank you [email protected])
Set the default cpu governor back to ondemand. conservative governor settings are still the same. ondemand governor settings are tweaked a bit (50000-90-5)
Changed some mali internals (set staycounts for steps to: 0-1-1 and down threshold for second step is set to 35). I did not use AndreiLux’s settings for not breaking the compatibility with voltage control app but I highly recommend you try it because it can save a lot of battery juice.
Some patches from upstream
2.6.10:
Default governor is set to conservative with sampling rate of 20msec. those who still say that lionheart is different than conservative governor should inspect the sources or those who don’t know how to do that should try this kernel to get a proof. if you still want EXACTLY the same lionheart governor, just flash lionheart.zip. Unlike what others say it will behave EXACTLY THE SAME as lionheart governor in void kernel if you flash it on this kernel, neak or several others who use netarchy’s change on conservative governor.
(Postponed to 2.6.11 to make a fair comparison of the conservative governor effects) drastic changes in gpu frequencies (thanks to [email protected]). you can use voltage control app to use modify them if they cause any lag in games or video playback but I didn’t feel any lag and they are just perfect. freq set is (40,167,267) with thresholds 85% 30% 80% 30%.
(Postponed to 2.6.11)Some other tweaks for performance and mostly battery life (made cpu hotplug threshods a bit high and some patches from upstream etc)
Set default i/o scheduler to bfq. it seems that song skipping doesn’t happen with bfq @ 100MHz (thanks to [email protected] for the feedback)
Applied Mel Gorman’s patches to SLUB allocator.
This release may not be as battery friendly as v2.6.9. I will make ondemand governor default and use different settings in v2.6.11 to target more battery life. apart from the slub allocator change (which should not effect the performance anyway) all changes in this release can be applied to v2.6.9 by using init scripts or voltage control app (just flash lionheart.zip and set i/o scheduler to bfq).
External SD/Internal SD are mounted backwards, careful when deleting information from them (emmc/sdcard) - Backup first!
Works with Samsung / CM7 / MIUI
Gokhanmoral - "Although I compile at&t version, Entropy512's kernel may be a better choice because there are some differences which I cannot test. He knows what he is talking about and I mean it..."
Flashing .ZIP's in CWM will change once flashing this KERNEL. You will now use the POWER BUTTON to select, and CHOOSE ZIP FROM INTERNAL SDCARD. Same goes for doing Backup/Restore, choose the Internal Card.
USB Debugging is turned off first flash, Just turn it back on Settings->Applications->Development
Great Explanation of Governors & I/O Schedulers
Using lulzactivev2? More control of the Governor from his Application
Overclock & Undervolt
SetCPU - Thread - Overclock CPU, Undervolt CPU, Profiles, Governor Control
Voltage Control - Market - Overclock CPU/GPU, Undervolt CPU/GPU, Profiles (Paid), BUS Change (Paid), Charging Speed, Governor Control
Battery Life
BetterBatteryStats - Thread (Bottom 2nd Post) - With BetterBatteryStats you can analyse the behavior of your phone, find applications causing the phone to drain battery while it is supposed to be asleep and measure the effect of corrective actions
CPU Spy - Market - This is a simple app to display the time the CPU spends in each frequency state. This can be a useful tool in diagnosing battery problems or tweaking your over-clock settings.
It also displays the current kernel information.
[GUIDE] – TIPS / TRICKS & Achieving MAXIMUM battery life - Thanks to AMDPOWERFIST
Can be flashed on Samsung ROMs and AOSP Based ROMS. Currently all Samsung 2.3.4, 2.3.5, 2.3.6, 2.3.7 based ROMS, CM7 and MIUI ROMS are supported. Based on linux kernel 2.6.35.14 + drivers from Samsung sources
Auto-Rooting
ClockworkMod Recovery v5.0.2.7 with back button support
Touch Recovery
Boot animation support
Supports SetCPU (OC upto 1600MHz, UC downto 100MHz)
User customizable frequency steps. You cannot change the step count but you can change the frequencies at each step.
Supports undervolting (UV between 800 mV and 1500 mV)
Supports voltage control via SetCPU (thanks to netarchy, ninpo, hacre)
Stock voltages as default
smartassV2, lulzactive, lagfree governors. and lots of other governors which are available as modules
Default governor is ondemand (200-1200MHz)
Default I/O scheduler is deadline
Tweaked ondemand and conservative governors
Compiler optimizations
User customizable charging speed (use at your own risk). You have to echo AC, MISC and USB charge currents to a misc device.
Touchscreen fix (thanks to vitalij)
Increased touchscreen sensitivity
GPU clock and voltage control interface (thanks to netarchy).
I/O, scheduler, hotplug and vm Tweaks
Automatic battery calibration. (removed. thanks to Entropy512. we do not need battery calibration for SGS2)
Available I/O schedulers: noop, deadline, CFQ, BFQ, V(R), SIO (default)
Available CPU governors: see this thread for the list of available governors and modules (thanks to droidphile)
/system/etc/init.d startup scripts support
Automatic backup of efs partition. You will have the files in your sdcard as well as /data/.siyah directory. copy them to a safe location in case you may need them later.
Updated jhash to version 3
Increased charging speed.
BLN (thanks to creams), liblights is autoinstalled if the existing one doesn't support BLN
Supports advanced touch tune driver. thanks to vitalij Link. the control app from Web, from Mobile. Thanks to tegrak for the driver patch file download
2nd core application support (thanks to tegrak)
Automounting of NTFS volumes for USB sticks (ntfs on external card is not supported)
XZ compression for the kernel to have smaller image size. the size is still similar to previous versions after adding new features
Integrated new sha-1 and crc32 slice-by-8 algorithms
SCHED_MC enabled to have less power consumption. It will have a better support in the next version as it needs more changes in the scheduler code.
Lower brightness levels for low-light conditions to save battery.
Experimental brightness behaviour modification via setting min_bl and max_gamma values.
Native BLN support for CM7 based roms.
Three GPU stepping (160-267-300) instead of two
Optimized and configurable hotplug thresholds and rates.
Thunderbolt! script integrated (thanks to pikachu01)
CIFS, SLQB, FUSE, NTFS, cgroup_timer_slack, autogroup, cleancache... and lots of other mambojambo that I forgot...
ZIP: Place zip on Internal SD -> Boot into CWM -> Clean Cache/Dalvik -> Install Zip
TAR: Download Odin -> Open Odin -> Boot into Download Mode -> Put .tar in PDA -> Start
Changelog: http://www.gokhanmoral.com/
Although some parts can be considered as original, all are based on inspirations, examples and other people's code. I have no claim to be original. I am only trying to make my (and probably other's) SGS2 experience better and fun.
About source codes: I do not release source codes during beta testing. I do not use git. I have already proven that I share source code, but only once per release. I don't think that mods will be uncomfortable with this but if they are I can create an account in github and share an old code just like most of the other developers do. I will not choose that path if I don't have to. You can download sources for the releases using the links below. I will simply ignore mails and posts asking about the source code because they are already shared. Also, GPL doesn't force me to use github nor it forces me to release the source code as soon as possible. Therefore, releasing the source code may be delayed for several days. If you don't like this sue me
Source code and releases can be found here: http://www.gokhanmoral.com/
Credits: Samsung, supercurio, hardcore, Hacre, Entropy, RAvenGEr, tegrak, cattleprod, codeworkx, hellcat, creams, vitalij, arighi and others I might have forgotten...
Unofficial:
Init.Doh by cwc3
ThunderBolt! [Governor + SGSII fixes] by pikachu01
[CWM Flashable] Kernel Cleaning Script (Cleans Cache) by jivy26
Example CWM-flashable /system/etc/init.d/99gpuv script (thanks to AndreiLux)
Example GPU/CPU undervolting and underclocking scripts by kwerdenker
Improved version of CPU undervolting script by kwerdenker
Another couple of nice init.d scripts created by fenomeno83
Enable Android Logger - CWM flashable (android logger is disabled by default in this kernel)
Disable Android Logger - CWM flashable (use this script if you have enabled the logger by using EnableLogger script)
flashable lionheart cpu governor and setting default i/o scheduler to deadline (remove /system/etc/init.d/01lionheart to uninstall. thanks to knzo for the tweaked conservative governor settings)
Older Versions(pm me if you have one I don't)
Its pretty fast!!!
http://www.gokhanmoral.com/gm/2011/11/29/siyahkernel-v2-2i-att-for-sgh-i777-devices/
That's great... more options. I'd like to see Hardcore's kernel ported too.
Here are some screen shots of Siyah kernel being OC to 1.6 on conservative governor. My rom is Unnamed 1.3.1 This is without any major tweaking such OC the GPU. Its extremely powerful
Sent from my SAMSUNG-SGH-I777 using XDA App
Here are some random Antutu bench scores. These were done on 1.2 GHz conservative governor. Awesome, we finally surpass the galaxy nexus
And we didn't need to OC to do it too. With ICS, we'll blow galaxy nexus out of the waters!
Sent from my SAMSUNG-SGH-I777 using XDA App
Question? If were running a hellraised rom will this kernel work our do we need an att rom?
Edit: just looked at his thread in the i9100 section. the kernel said compatible with aosp roms as well as in cm7 and miui. Is this true for this one?
Sent from my GT-I9100 using XDA App
Any issues with it? Wifi, reboots, battery life, ect, ect?
Edit: flashed it and everything went smoothly. No issues to report on. According to his thread it's just as stable as stock. Hope it stays that way for us.
Sent from my páhhōniē
I would also link to know if it's compatible with cm7/miui
Looks really interesting
Sent from my SGH-I777 using xda premium
Here's a quick link to the Siyah kernel over in the i9100 forums. Everything as far as information about the kernel should apply to our phones except the obvious (battery charging steps, anything with the home button, in other words strictly hardware difference related points) as he now has made an i777 kernel version.
http://forum.xda-developers.com/showthread.php?t=1263838
This kernel should get posted in the development thread by someone willing to keep up on all it's changes as the Siyah kernel seems to get updated all the time. Unfortunately once I heal up from surgery I won't have the time to be able to do that.
Sent from my páhhōniē
insaneturbo13 said:
I would also link to know if it's compatible with cm7/miui
Looks really interesting
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Yes it is compatible with all stock roms, cm7 roms, and MIUI roms (both 2.3.4 and 2.3.5 variations of all three)
Sent from my páhhōniē
Confirmed flashed this kernal and I am using cm7. Everything is kosher so far.
don't work USB with siyahkernel for i777
I got about 5500 in Quadrant (1.6 ghz, conservative) but everytime I oc to 1.6 and try to run CFBench the phone crashes at Java MFLOPS.
jcracken said:
I got about 5500 in Quadrant (1.6 ghz, conservative) but everytime I oc to 1.6 and try to run CFBench the phone crashes at Java MFLOPS.
Click to expand...
Click to collapse
Yeah I've read that at 1.6 it crashes..its best to stay at 1.5..
Sent from my GT-I9100 using Tapatalk
Working smoothly thus far for me, running CM7. Benchmarks are pointless.
jcracken said:
I got about 5500 in Quadrant (1.6 ghz, conservative) but everytime I oc to 1.6 and try to run CFBench the phone crashes at Java MFLOPS.
Click to expand...
Click to collapse
Getting the exact same... gonna try 1.5.
Sent from my SAMSUNG-SGH-I777 using xda premium
The CWM .zip will not download via phone browser, and when downloading from a windows 7 (IE browser) PC it successfully downloads but when flashing it says the package is bad. I think he needs to reupload it or put an MD5 checksum in place.
For stability, I ran a setcpu stress test on my phone all morning at 1.6 (nearly blew up my battery) and had no issues at all on conservative governor.
Try downloading it with Firefox.. it works fine for me..
rdubyah said:
Try downloading it with Firefox.. it works fine for me..
Click to expand...
Click to collapse
My mistake, it did not transfer from dropbox correctly.
Info & Thanks
What you need to know before you use this kernel.
This kernel got Selinux Permissive state as it supports more apps like TiTaniumbackup.
Reverting back to a Selinux enforced Kernel (stock) is no longer a problem from Rev3.0 and up.
You can set Selinux Status with the included Synapse app
You want to know why this kernel comes with Selinux included, google for Selinux and search your answers.
AllCast mirror will not work as this is a Samsung thing and not opensource.
If this is a problem for you, don't use this kernel.
DISCONTINUED , A NEW THREAD WILL BE OPENED FOR THE NEW KERNEL SUPPORTING ONLY THE KITKAT BOOTLOADER.
NO JELLYBEAN BOOLTOADER SUPPORT, IT IS TIME TO MOVE FORWARD.
INSTALLATION
Take a full nandroid backup.
NO NEED TO BE ON ANY KITKAT BOOTLOADER (your wifi will work with this kernel)
YOU NEED TO BE ON A KITKAT TOUCHWIZ ROM.
Install with cwm
Thanks:
sidmoraes for pointing me to other kernel source that I could use as base, still had to change some stuff but this is better then waiting for samsung to release there source, if they ever will. (Finally Samsung released source)
Andreilux - Faux123 - Yank555.lu for kernel work
ZaneZam for the zzmoove governor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel comes with the policy: IT IS AS IT IS.Use at your own risk
Take a Nandroid backup of your system and of your boot.img
You need to be on custom cwm to install this
ONLY FOR SAMSUNG TOUCHWIZ BASED KITKAT ROMS
Benchmark scores:
Stock Normal Note8.0 Antutu Ranking. 17708 points
My Antutu = 23486 points
Stock Quadrant ranking = 6613 points
My Quadrant = 13685 points
CivZ-SphereKat-REV5.4-GT-N5110-5100/5120 And older versions.
Never install a kernel that is not for your device, it will cause a hard brick.
Stock kernels can be found in the SphereKat folder of your device
The only good app to control this Kernel is the included SYNAPSE appExample of what synapse looks like,THIS IS JUST A EXAMPLE.
SphereEngine KERNEL Features
If you change nothing these are the following Features/optimisations you get compared to Stock:
SELINUX protection included but set at Permissive = No problems wit apps like Paragon and Titainium.
SELinux control with Synapse
S-Pen Alignment fixed
Default Speeds 200MHz-1600MHz
Activating Saving power will result into 200MHz-1100MHz.
GPU Overclocking thanks ZaneZam / DerTeufel / AndreiLux
GPU settings are:
Step0 54MHz = new Idle step = when in browser mode and no gaming this low GPU speed will help save power
Step1 266MHz
Step2 350MHz
Step3 533MHz = new speed foe step3 for better performance in drawing
Step4 700MHz = New OC speed for the better gaming performance
GPU settings are not editable and hard set in the kernel
Init.d support
ARCH-Power enabled
DynamicFSYNC = Use Terminal command or Trickster Mod app. = enabled by default.
Memory Leak fixed
mmc cap erase disabled ( just as a precaution )
[*]IKCONFIG_PROC support
Driver support included in kernel:
NTFS_RW / FAT / FAT32 / EXFAT support
3Gusb Support (ppp widget)
CIFS / UFS / ISO9660 / UDF_FS / HF / HF_PLUS
Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter support
Ralink driver support : Ralink rt2500 (USB) / Ralink rt2501/rt73 (USB) / Ralink rt27xx/rt28xx/rt30xx(USB)/rt2800usb - Include support for rt33xx , rt35xx , rt53xx
Extra Drivers: MAC80211 / RTL8187 / EEPROM_93cx6 Support
Boeflla 1.6.0 Sound engine support
OTG Audio dock , Car dock support
[*]SideSync support
[*]Dynamic Samsung Hotplugging
Note on CIFS:
Example on what you enter, but your IP and share, if that wasn't clear. The option section is very important
Note on NTFS
You need to use Paragon!
You need to set your mount point yourself.
Example and recommended is:
Code:
/mnt/extSdCard/paragon
Advanced users support
OC & UV support for CPU
Max CPU speed is 1920MHz
Min CPU speed is 100MHz
Governors: Adaptive, Pegasusq (recommended), Performance, Ondemand, Interactive.
Schedulers: cfq, Noop, Deadline, Row, Sio, VR
Extra TCP wifi connection added: Westood, reno, htcp, vegas, veno.
Changelog:
07/Jun/2014 First Public release Rev2.0
08/Jun/2014 First Public release Rev2.1
[*]GPU step 5 included, now max it will go to 533MHz
[*]Auobrightness sensor fixes part2
[*]CPU sloop adjusted
[*]zzmoove profile nr8.
09/Jun/2014 First Public release Rev2.2
[*]Memory Leak fix cpu stats
[*]Memory Leak fix Kernel Ext4 & Power
[*]zzmoove profile nr6.
I recommend not to use Interactive and Powersave governor as they are buggy.
09/Jun/2014 First Public release Rev3.0
[*]Selinux included in the kernel as more security is better. This is the reason why I bumded to Rev3.0 to make a clear difference.
This kernel got Selinux Permissive state as it supports more apps like TiTaniumbackup.
Reverting back to a Selinux enforced Kernel (stock) is no longer a problem from Rev3.0 and up.
You can set Selinux Status with terminal command to ENFORCED with "setenforce 1". Or use a init.d script to have it on reboot also on ENFORCED.
You want to know why this kernel comes with Selinux included, google for Selinux and search your answers.
[*]Governors , powersave, userspace = Disabled as they are useless and buggy.
10/Jun/2014 Rev3.1 Released:
Ramdisk changes
Interactive set on all parameters as startup and default governor, this to prevent lockup of cores on boot.
Synapse SELinux status oprion, change to ENFORCED & PERMISSIVE , default is permissive
Small tweaks in kernel boot_up custom script.
12/Jun/2014 Rev3.2 Released:
Ramdisk changes
CPU freq rework to solve the hotplug problems
zzmoove and interactive removed = I strongly recomment pegasusq
Synapse Global voltage control added and some more info stuff
Github source updated
13/Jun/2014 Rev3.3 Released:
Ramdisk changes
Revert CPU freq rework to solve the hotplug problems
Compiled with Samsun Dynamic Hotplugging to resolve this problem
Synapse GPU info added
15/Jun/2014 Rev3.4 Released:
Bus_freq changes
A ton of missing driver commits for the KONA device added
Autobacklight 0.0 lux light problem fixed, no it works correctly even in a dark room
That is the problem working with a kernel that isn't for this device. You need to debug and add the stuff that is missing.
18/Jun/2014 Rev3.7 Released:
N5100 support added = no testers pm'd me so this is experimental
N5120 support added = no testers pm'd me so this is experimental
Ramdisk changes and github updated
20/Jun/2014 Rev3.8 Released:
Hotplug rework
Ramdisk changes for the s-pen
28/Jun/2014 Rev4.0 - 5110 Released: (support for the 5100 & 5120 will follow later)
Merged with official Samsung KK source = fixes all existing problems with wakelock and many other optimizations for our device
29/Jun/2014 Rev4.0 - support for the 5100 & 5120 added
Merged with official Samsung KK source = fixes all existing problems with wakelock and many other optimizations for our device
Github updated
02/Jul/2014 Rev4.1 - support for the 5110 , 5100 & 5120
Boeffla sound driver updated to 1.66
ZZMOOVE governor reactivated
06/Jul/2014 Rev4.2 - support for the 5110 , 5100 & 5120
Balanced the voltage settings
13/07/2014 Rev4.3 is released
DynamicFsync updated
IntelliHotplug introduced = replacement for the samsung hotplug driver. = Synapse controled
quad core stats for better performance
avg_running time for intelli hotplug support
Synapse settings backup/restore option
I/O advanced settings in Synapse.
Build.prop tweaks in Synapse
Network tweaks in Synapse
...............
15/07/2014 REV4.3_B released
[*]VPN - Reverse path filtering FIX = caused by wrong Synapse settings
[*]Synapse = Network settings changed to solve the vpn problem
16/07/2014 Rev5.0 is released
Dynamic Hotpluging enabled
Update governors
New source 5110NA commits added for the 5120LE
Music skipping problem solved (please use Pegasusq or interactive governor)
SideSync driver added and enabled
Ramdisk removed hotplug locks
Compiled on new toolchain arm-2010q1 from "code sourcery" as suggested by Samsung for the Note8.0 KitKat
...............
17/07/2014 Rev5.1 is released
Different setting for Dynamic Hotpluging, less agressive
Frandom added and enabled
CPU slope changed like on the JB kernel
Dirty writeback
Various performance tweaks
Toolchain arm-2010q1 from "code sourcery" uploaded for the people that want to compile it with this toolchain (look in the kernel folder) as suggested by Samsung for the Note8.0 KitKat
Github updated to Rev5.1
...............
24/08/2014 REV5.4 released
[*]Synapse settings updated
[*]Updated toolchain arm-2010q1(202) from "code sourcery"
[*]GPU Overclocking thanks ZaneZam / DerTeufel / AndreiLux
GPU settings are:
Step0 54MHz = new Idle step = when in browser mode and no gaming this low GPU speed will help save power
Step1 266MHz
Step2 350MHz
Step3 533MHz = new speed foe step3 for better performance in drawing
Step4 700MHz = New OC speed for the better gaming performance
GPU settings are not editable and hard set in the kernel
[*]Corrected CPU freq going above scaling_max thanks to Yank555.lu
Source
XDA:DevDB Information
SphereKat, Kernel for the Samsung Galaxy Note 8.0
Contributors
civato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Rev2.0 first public
Stable Release Date: 2014-06-07
Current Beta Version: Rev1.4 non public re
Beta Release Date: 2014-06-05
Created 2014-06-07
Last Updated 2014-09-16
Thank You very much!!!
I will try this kernel in order do fix the spen accuracy.
Doing a nandroid backup and trying.
I´ll let you now my experience.
Martín
It is almost perfect!!!
MartinBM said:
Thank You very much!!!
I will try this kernel in order do fix the spen accuracy.
Doing a nandroid backup and trying.
I´ll let you now my experience.
Martín
Click to expand...
Click to collapse
S-pen alignment is fixed in the kernel and rom so you need both to have 100% accuracy.
This kernel will fix it for 95%. The other 5% is in the roms framework.
#########################################################
Note to all users:
Don't be a lurker, hit thanks as it took plenty of hours to build this.
Samsung didn't release the kernel source (not yet) so a lot of debugging was needed to fix problems like the sensors not reporting correctly.
This is the only thing I ask, hit thanks if this helps you.
It is free and enjoy it.
#########################################
Edit:
About the lurkers,
Martin from this post isn't one as he is a donator and thanks hitter.
A example to you all.
I wanted that cleared out as I didn't want Martin to take that lurker thing personal.
civato said:
S-pen alignment is fixed in the kernel and rom so you need both to have 100% accuracy.
This kernel will fix it for 95%. The other 5% is in the roms framework.
Note to all users:
Don't be a lurker, hit thanks as it took plenty of hours to build this.
Samsung didn't release the kernel source (not yet) so a lot of debugging was needed to fix problems like the sensors not reporting correctly.
This is the only thing I ask, hit thanks if this helps you.
It is free and enjoy it.
Click to expand...
Click to collapse
Much appreciated adding dock & boeffla support. You are a super dev.. will test and report and thanks.
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi. [emoji106]
Sent from my GT-N5110 using Tapatalk
androidmonsta said:
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi. [emoji106]
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
Damn... if only I had waited.
THANK YOU CIVATO!!! What is arch-power?
androidmonsta said:
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
Oh I didn't know that, well that is a good thing, I will add this in my OP.
civato said:
Oh I didn't know that, well that is a good thing, I will add this in my OP.
Click to expand...
Click to collapse
Yup, I'm running FLEXNOTE 1.3 with 4.2.2 bootloader using this kernel. Did a full wipe in Philz using the "I want to install new rom" option.
Sent from my GT-N5110 using Tapatalk
Rev2.1 released
08/Jun/2014 First Public release Rev2.1
[*]GPU step 5 included, now max it will go to 533MHz
[*]Auobrightness sensor fixes part2
[*]CPU sloop adjusted
zzmoove profile nr8.
GPU control is not possible , maybe later as the GPU driver is totally different then on JB.
androidmonsta said:
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi. [emoji106]
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
I confirm. Wifi working great. Thanks
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Flashed and while it seems to be working fine for the most part, my CPU is constantly maxed out for some reason. I changed no settings or anything, and it was idling fine before flashing. I'm sure it might be something with my device, but I thought I'd put it out there just in case it's not. I'm going to mess around with some settings, see what I can do, and see if it changes.
ArobeeTV said:
Flashed and while it seems to be working fine for the most part, my CPU is constantly maxed out for some reason. I changed no settings or anything, and it was idling fine before flashing. I'm sure it might be something with my device, but I thought I'd put it out there just in case it's not. I'm going to mess around with some settings, see what I can do, and see if it changes.
Click to expand...
Click to collapse
Like you said, it could be something with your device, mine goes into deep sleep and it has gone as high as 90% deep sleep. Pretty amazing I would say and great job by @civato. Are you on pegasusq governor?
cbrinnny said:
Like you said, it could be something with your device, mine goes into deep sleep and it has gone as high as 90% deep sleep. Pretty amazing I would say and great job by @civato. Are you on pegasusq governor?
Click to expand...
Click to collapse
I was indeed using pegasusq. After trying multiple different governors and nothing changing (even stayed at 1600mhz on powersaving), I've decided to wipe my device entirely and start from scratch. No biggie. If I narrow it down to a specific app or device setting that was causing it, I'll post it so people are aware.
09/Jun/2014 First Public release Rev2.2
[*]Memory Leak fix cpu stats
[*]Memory Leak fix Kernel Ext4 & Power
zzmoove profile nr6.
I recommend not to use Powersave governor as is very buggy. Next release will it have removed as it useless.
Best governors are Pegasusq - Adaptive and zzmoove.
I am running it an am happy to report no issues. The only changes I made were to up my top cpu speed to 1.8gzh. All govs are at default. Thanks again. Can't wait to see what is next in the works for this tablet.
Sent from my GT-N5110 using XDA Premium HD app
Scores
With my rom & kernel
Benchmark scores:
Stock Normal Note8.0 Antutu Ranking. 17708 points
My Antutu = 23486 points
Stock Quadrant ranking = 6613 points
My Quadrant = 13685 points
Running with rom v1.3 and civz kitkat bootloader. Is data wipe needed? Sorry for the stupid question.
Sent from my GT-N5110 using XDA Premium 4 mobile app
slushbilly said:
Running with rom v1.3 and civz kitkat bootloader. Is data wipe needed? Sorry for the stupid question.
Sent from my GT-N5110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not needed, me as a habit always wipe cache and dalvik.
Sent from my GT-N5110 using Tapatalk
Hi androidmonsta, How did you get Nandroid added under your Backup Settings? I assume it is part of the FLEXNOTE rom. What app does this link to?
rjamer said:
Hi androidmonsta, How did you get Nandroid added under your Backup Settings? I assume it is part of the FLEXNOTE rom. What app does this link to?
Click to expand...
Click to collapse
It comes from the rom. Its an backup app. Never use before LOL.
Sent from my GT-N5110 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
this kernel is based on kernel source by kumajaya, branch cm-13.0-wt88047So it just for Marshmallow ROM ONLY
About
Undine-X is my customized Kernel for Wingtech wt88047 a.k.a Xiaomi Redmi 2 with lots of new features.
I started learning about compiling android kernel in mid-March, inspired by some of modified kernel in this device.
Now I'm using kumajaya's kernel source with cherrypicks from some of the greatest XDA kernel developers sources.
Cross-compile
Compiled with HyperLinaro 5.1 Toolchain
Using -Ofast Optimization Flags
Features
MSM Limiter
Power Suspend Mode
Overclock CPU to 1.4GHz
Adreno Idler
MSM Hotplug, Mako Hotplug, and Intelliplug
New CPU Governor : impulse, lionfish, bluactive, darkness, elementalx, nightmare, zzmoove, yankactive
New I/O Scheduler :tripndroid, zen, sioplus, fiops
Advanced TCP Congestion Algorithm
USB Fast Charging (no more slow charging when charging in computer)
Double Tap 2 Wake
Vibration Control
Asynchronous Fsync
KCAL Display Color Control
and moar .....
Installation
Download the zip file
Reboot to your recovery (I'm suggested yo to INSTALL TWRP 3.0.0 to make sure aroma running properly)
BACKUP your BOOT partition (to make it safe so your can easely restore if found any critical problem)
Install the zip file
Choose your preferred options (cpu min/max, governor, selinux mode, etc)
Reboot to system
Preferred Kernel Tweaker App
ReModded Singularity Kernel Adiutor, Download it at my GDrive
NOTE
If you getting some problem,
Send me your log files or I can't help you. Thanks.
/sys/fs/pstore/console-ramoops
/sys/fs/pstore/dmesg-ramoops
Doubletap2wake & Sweep2wake Preview
XDA:DevDB Information
Undine-X Kernel, Kernel for the Xiaomi Redmi 2
Contributors
ichihara.rifa
Source Code: https://github.com/harukachan/UndineX_XR2
Kernel Special Features: Overclock, Aroma Installer, Double Tap 2 Wake, Sweep 2 Wake, Power Suspend, MSM Limiter
Version Information
Status: Stable
Current Stable Version: 1.3.0
Stable Release Date: 2016-04-16
Created 2016-03-27
Last Updated 2016-09-20
Reserved
Download Links
codeharuka-UndineX-1.3.0.zip
ReModded-SKA-20160417.apk
Changelogs
v1.3.0
[new] MSM Limiter v4.0
[changed] Turn down charger rate to 1100 mAh (Avoid hardware issue)
[changed] Some Improvement in UKSM
[changed] Revert Max CPUFreq to 1.4GHz
[removed] Intelliactive Governor (Still not worth for msm8916)
[removed] FauxSound Sound Control (because very buggy)
[changed] Some Improvement in Aroma Installer Themes
[changed] Some Improvement From Cyanogenmod
v1.2.1
[changed] Fix CPU Frequencies Table
[changed] Unlock GPU Frequencies to 720MHz
[changed] Improving I/O latency
[changed] Implement powersuspend to doubletap2wake and sweep2wake
v1.2.02-sid
[new] Unlock GPU Frequencies up to 720MHz
[changed] Fixed Initscript, CPU Frequencies Table, and more, to fix random reboot problem.
v1.2.01-sid
[new] UKSM v1.2.3 (Ultra-Kernel Samepage Merging From http://kerneldedup.org/) This feature make your ram more efficient and more fluid.
[new] Sweep2wake Feature (From Bricked-Mako Kernel by @show-p1984)
[new] Implement Cryptography for LZ4 from berserk @Ashish94
[new] Implement Frandom from berserk @Ashish94
[new] Enable/Disable CRC Scanning (from https://github.com/boype/kernel_tuna_kk44)
[changed] Unlocked CPU Frequencies up-to 1.6 GHz
[changed] Now hwkeys are not active when in suspend mode. Patch from TeslaROM Kernel Source @premaca
X1.1-6-H2O
[new] MDSS Color Control (Formerly KCAL)
[changed] Fix CPU Frequencies tables that can't ramp up to 1.4GHz
[changed] Fix touchscreen random not responding when doubletap2wake activated.
X1.1-4-H2O
[changed] fauxsound: removing all mic tuner to fix low output from microphone during calls (thanks @akash akya)
[changed] touchscreen: add resume when doze (thanks @pirej @zwliew)
[new] installer : add Balanced Preset for new user (when still confuse about setup)
X1.1-2-H2O
[changed] now config restoration placed in ramdisk instead of init.d, to make it still working if the rom not support init.d
[new] Mako hotplug and Intelliplug
[changed] Now the kernel compiled with Hyper Linaro Toolchain GCC 5.1
[new] Add Asynchronous Fsync
X1.1-0-H2O :
Initial publish on XDA
Can i test this with Tesla OS?
Just tried Elix1r, flashed zip and tried fastboot flashing, rom 100% clean and it didn't work.
hardsonic said:
Can i test this with Tesla OS?
Just tried Elix1r, flashed zip and tried fastboot flashing, rom 100% clean and it didn't work.
Click to expand...
Click to collapse
I'm just test on cm13 and aokp only. but you can try it.
don't forget to backup boot partition before flash it.
YACK
Finally made it through xda .. can i request more hotplug .. hehe
please add mako hotplug pleasee.
inpamcoxie said:
YACK
Finally made it through xda .. can i request more hotplug .. hehe
please add mako hotplug pleasee.
Click to expand...
Click to collapse
Added to the my plan
Thanks for suggestion
Great work!
It's raining Kernels for our little precious...
Kudos to all devs ?
more in our phone's development... great news
everything seems good ..but cpu cannot reach 1.4ghz even when the governor was set to performance..other than that its good..pls keep up the effort..
btw i m using tesla rom
ibal97 said:
everything seems good ..but cpu cannot reach 1.4ghz even when the governor was set to performance..other than that its good..pls keep up the effort..
btw i m using tesla rom
Click to expand...
Click to collapse
Thanks for review
imo it's not really "cant reach",
but it optimized so cpu load is still under 1.4ghz.
Performance governor ramp up your CPU at the highest value, it doesn't matter were you are in game or just playing music.
ichihara.rifa said:
Thanks for review
imo it's not really "cant reach",
but it optimized so cpu load is still under 1.4ghz.
Performance governor ramp up your CPU at the highest value, it doesn't matter were you are in game or just playing music.
Click to expand...
Click to collapse
ohh...now i understand.. thanks for the kernel
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
nick37332001 said:
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
Click to expand...
Click to collapse
it depend on hardware, i mean i'm just trying to combine usb fstchg patch with more value at max volt.
well i'm still not tried about it because i dont have tc adaptor that larger than 1000mA :laugh:
lol my english is very bad :laugh:
Good to see the development of redmi 2 now.
Kernels are coming like rain!
Development like this seems unbelievable!
Cheers
-Sourav_8434
nick37332001 said:
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
Click to expand...
Click to collapse
Well I used the Ampere app, the max.amount of current I got was 1010mAh , with constant values revolving around 700-800mAh. Others can also check. I'm using the stock charger.
After install the kernel I can't unlock my phone, I'm using pattern unlock. Everytime that I try to unlock a black screen appears and go back to unlock screen.
I had the same problem with latest version of octopus kenel and I have to use and old version.
Any idea how to fix this problem?
Enviado desde mi Mi-4c mediante Tapatalk
siba01 said:
After install the kernel I can't unlock my phone, I'm using pattern unlock. Everytime that I try to unlock a black screen appears and go back to unlock screen.
I had the same problem with latest version of octopus kenel and I have to use and old version.
Any idea how to fix this problem?
Enviado desde mi Mi-4c mediante Tapatalk
Click to expand...
Click to collapse
I will look into that,
temporary, you can disable dt2w.
ichihara.rifa said:
I will look into that,
temporary, you can disable dt2w.
Click to expand...
Click to collapse
Yup... dt2w is the one causing this problem... the touchscreen doesnt seem to wakeup from touch inputs
Update X1.1-2-H20 [new compiler and hotplug]
Changelogs at first page :laugh:
Ayy my minus is now increased, lmao
no kernel-bugs-related so far....
[i'm more than a noob when it comes to kernel]
this is the only one that made my 紅米2 react properly on dt2w
(feature i missed the most, and coming back big style) {still waiting for a stable berserk to be honest}
8 stars (out of 5) for the looks/user/aroma approach - specially for people not using kernel managers (i'm not 1 of those, but solidarity is important)
has every other "crowd pleasers" working except for control freaks (just kidding) + screen/color profiles << this is not a plea
++ having an option for color-profile would imho make it more than awsome......
great work, even greater kernel, thank you
tipsy by @premaca
recommended settings more than appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial DorimanX builds by GreekDragon(The resurrection of jellybean kernels)
Dorimanx JB unofficial kernel by GreekDragon
The Background:
DorimanX development has stopped for a while now. I've been a long term dorimanx user, but I felt that a lot of features need to be implemented into the kernel. As of a result, I decided to make my own personal builds! Please note that I'm no way as good as the master himself, Dorimanx, but I try to implement features to the best of my abilities. Also, I'm not going to be a proper maintainer of dorimanx kernel, this is just what I've done in my spare time.
This is a fork from Dorimanx's git.
If you have problems or if anything goes wrong, you can flash latest build by Computoncio
You can download from his official website:
http://dorimanx.casoncia.org/
The Mission:
To continue giving support for the much loved kernel. New features and additions will be added to improve flexibility and speed to the already amazing kernel. My goal is to improve DorimanX kernel as much as I can, without sacrificing stability.
4.1.X JELLYBEAN ONLY!
DISCLAIMER:
I'm not responsible for bricked devices or wrong version flashing
You are using this kernel at your own responsibility
——— !!!!!!!! YOU HAVE BEEN WARNED !!!!!!!! ———
FEATURES:
This kernel includes the following additional features over stock dorimanX kernel:
- CPU Governors: HYPER, Ondemand, pegasusQ, Intellidemand, neoX, darkness, nightmare, sleepy, conservative (Default: HYPER)
- TCP Algorithms: Cubic, Reno, BIC, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, Lp, Yeah, Illinois (Default: Westwood)
- FPBug/Musicbug fix is already included in this kernel!
- BLN and BLNWW support
- Updated Linux Kernel version to 3.15.0 stable!
- IO Schedulers: ROW, FIOPS, SIO, BFQ, CFQ, Noop, ZEN, Deadline (Default: SIO)
- Trim support
THINGS I WILL NOT ADD:
Code:
- LZ4 Compression (Our Boot partition is way too small to support this)
- Useless CPU governors such as Userspace
- Colour tuning support (Unless someone helps me with this)
- Recovery version (WIll only consider doing this if working on LP kernel)
- Higher thermal limits (We all know what happens if we do this)
- Higher overclocking/Lower underclocking capabilities (So you want less stability and more SODs?)
- Synapse support (Stweaks is the only app that can fully support this kernel)
CREDITS:
Dorimanx (the real master of the kernel)
Gokhanmoral (Siyah Kernel)
Voku1987(This Kernel)
Alucard_24(This Kernel)
STANTRC(This Kernel)
Entropy512 (CyanogenMod)
Tungstwenty (On screen gestures addon)
Torvalds (Kernel 3.6.Y maintainer)
Computoncio (This Kernel)
cybernetus (This Kernel)
stelistcristi (Contents of this post)
chhapil (For helping me with all of the issues, thanks man)
Chet Kener (For UBER toolchain)
Lanchon (For TRIM fix)
Zeitferne (For FP Bug/Music Bug fix)
gsstudios (For his help and his thread template)
DOWNLOAD:
Siyah-Dorimanx-V8.70-JB-SGII-PWR-CORE-DRAGON-TRIM.zip
AndroidFileHost Download Folder
CHANGELOG:
Refer to second post
KERNEL SOURCE:
Source code of the kernel can be found here:
https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel
https://github.com/dragonGR/initramfs3
ISSUES:
- All dorimanx bugs
USEFUL LINKS
- CPU Governor and I/O Scheduler Guide
- DorimanX tuning guide
TCP Algorithm guide
XDA:DevDB Information
DorimanX JB by GreekDragon, Kernel for the Samsung Galaxy S II
Contributors
GreekDragon, chhapil
Source Code: https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel
Kernel Special Features:
Version Information
Status: Stable
Created 2016-07-15
Last Updated 2016-12-03
Changelogs:
--RELEASED VERSIONS --
Code:
[B]DorimanX 8.70 (STABLE) [/B]
- Massive update -
- Upstream & Security fixes -
- Stability improved -
- Switched to gsstudio's fork -
Reserved
Welcome to the team
@Lysergic Acid @gsstudios , @arnab , @GreekDragon @Trafalgar Square ..... and i missed many but what a Team on I9100 again
thanks to all to continue to maintain our device with a so high level of development !
Troubadour666 said:
@Lysergic Acid @gsstudios , @arnab , @GreekDragon @Trafalgar Square ..... and i missed many but what a Team on I9100 again
thanks to all to continue to maintain our device with a so high level of development !
Click to expand...
Click to collapse
After 5 years, s2 is still alive and kicking. I guess is a zombie now.
Its work
Do you have any profile between battery/stability/games
I am here
xn0live said:
Its work
Do you have any profile between battery/stability/games
Click to expand...
Click to collapse
I don't want to touch profiles because i know i will screw up there.
Trafalgar Square said:
I am here
Click to expand...
Click to collapse
Of course you are here.
I'm testing a new v8.52. I added IsoRec and some other things, if everything is good, i will release it.
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
chhapil said:
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
Click to expand...
Click to collapse
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Could you explain why there's dorimanx.zip file inside the kernel file
Was it a mistake or you compiled two different kernels?
gsstudios said:
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Click to expand...
Click to collapse
May be my expectations would be wrong, apart from Mali code, rest of the code should be almost same.
Even the WiFi driver has become totally open source now but it's not merged to JB branch fully.
Lot of pieces related to net, scheduling are also different.
I guess since Dorimanx and computino's days it has started bifercating.
I hope we can bring it together
Always if my mobile is off(screen off) and i get a whatsapp message my phone wake up
where is the option, where i can disabled it?
BLN is off
and what does it mean if a person say i am using " cpu grpup 2 or cpu group 3" where is the setting for that
chhapil said:
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
Click to expand...
Click to collapse
Yeah, i'm testing it along with some other things.
I have something in my mind. If everything is ok, JB kernel will be closer to LP one. Not sure if you get me.
gsstudios said:
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Click to expand...
Click to collapse
Thanks again.
Thanks.
Muhammadsoli said:
Could you explain why there's dorimanx.zip file inside the kernel file
Was it a mistake or you compiled two different kernels?
Click to expand...
Click to collapse
Is a mistake.
chhapil said:
May be my expectations would be wrong, apart from Mali code, rest of the code should be almost same.
Even the WiFi driver has become totally open source now but it's not merged to JB branch fully.
Lot of pieces related to net, scheduling are also different.
I guess since Dorimanx and computino's days it has started bifercating.
I hope we can bring it together
Click to expand...
Click to collapse
WIFI Drivers is stable on JB.. correct me if i'm wrong, but why to update the drivers when the one from JB works great?
xn0live said:
Always if my mobile is off(screen off) and i get a whatsapp message my phone wake up
where is the option, where i can disabled it?
BLN is off
and what does it mean if a person say i am using " cpu grpup 2 or cpu group 3" where is the setting for that
Click to expand...
Click to collapse
What do you mean?
About cpu group, is on STweaks and specifically in CPU-Voltages tab.
Dorimanx v8.55 is up!
Changelogs:
- Added IsoRec
- Kernel is now 3.15
- Removed zzmanX
- Added zzmoove
- Removed Powersave governor
- Removed Perfomance governor
- Removed VR and FIFO schedulers
- Enabled other flags for FIOPS
- Updated SuperSU to v2.46
- Fixed permissions for power efficient workqueues parameter
- Fixed parsing package error
- Synced chhapil's zram updates
- Set lz4 as the default algorithm for zram
- Merged almost all fixes from zzmoove develop branch.
- Added tcp algorithm changing support and set westwood as the default
- Governors Updated
- Tuned IO schedulers
- Fixed some memory corruptions
- Sync IO scheduler changes with KK branch
- Fixed some leaks
- Applied some security updates
- Added PE workqueue control
- Added TCP algorithm changing support to stweaks
- Initial support for software CRC toggle
Downloads
AFH: https://www.androidfilehost.com/?fid=24591000424948196
Github(mirror):https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel/releases/tag/v8.55-stable
Found some issues
Stweaks always detects a value been changed, I think your profiles are out of sync
Trim is not working properly, phone hangs while trimming, check the discard option in fstab in initramfs
Overall deep sleep is good, resume is faster after screen off state
:good:
chhapil said:
Found some issues
Stweaks always detects a value been changed, I think your profiles are out of sync
Trim is not working properly, phone hangs while trimming, check the discard option in fstab in initramfs
Overall deep sleep is good, resume is faster after screen off state
:good:
Click to expand...
Click to collapse
TRIM works fine here. And i have affected chip if that matters.
About Stweaks, i think i know the problem. Testing.
Resume is faster indeed.
I flash the 2 version
the kernel is not very stable, its freeze almost
xn0live said:
I flash the 2 version
the kernel is not very stable, its freeze almost
Click to expand...
Click to collapse
No freeze for me. All is good. @chhapil you faced freeze?
All the credits for this kernel to @Tk-Glitch
I only ported this kernel to ME302KL (DUMA)
These kernels are provided as-is without warranty. I'm not responsible for any problem you may encounter with your phone or tablet or if your cat suddenly dies.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Overview & features :
- Based on Google AOSP 3.4.0 and LineageOS's kernel sources for MSM devices
- CPU OC up to 2.3Ghz with OV/UV support / minimum frequency down to 81 MHz (configurable)
- L2/bus speed OC up to 1.49GHz / 4.8GBPS
- GPU OC up to 627 MHz with OV/UV support
- CPU governors : Faux's intellidemand, interactive, ondemand, smartmax, intelliactive, conservative, elementalx
- I/O schedulers: noop, deadline, cfq, fiops, sio, BFQ, zen
- Kernel based intelli-thermal driver by Faux123
- Kernel based msm hotplug driver by Fluxi
- tni.andro's battery life extender support
- Magnetic on/off setting (Does not work because DUMA hasn't LID)
- USB fast charge support
- USB OTG charge hack support by flar2
- FauxSound support
- LineageOS's PCC color tweaking
- Fsync switch on/off
- Touchscreen patches by Showp1984
- Touchscreen wake/sleep gestures by flar2
- Kali Pwn Pad experimental support
- Optimized algorithms and libraries
- Various performance and power saving tweaks
- NTFS, NFS and exFAT support
- F2FS support up to all-F2FS with automatic ramdisk patching at flash time (reflash if you change partition format !)
- Kexec-hardboot support for Multirom compatibility
- This is the Full package. It comes with Aroma installer to set core features at flash time (L2 OC level, CPU OC, etc.)
- Custom Synapse support with various settings and core features tweaks
- Compiled with Linaro 7.1.1 toolchain with various optimizations
- SELinux Permissive patch (Disabled by default, can be enabled in Aroma)
- Wifi firmware overrider to fix wifi on 4.4.3 & lower or on roms using old wifi firmware
DOWNLOAD
r564 Full:
https://www.androidfilehost.com/?fid=529152257862722764
Link Updated - BUGFIX 28-04-2017
r565 Full (10-05-2017):
https://www.androidfilehost.com/?fid=745425885120730696
r566 Full (07-06-2017): (This Release has a new kind of ramdisk, so use only on AOSP 7.1.2 r12 and newer. Don't use with AOSP 7.1.2 r8 and older)
https://www.androidfilehost.com/?fid=745425885120739264
r570 Full (29-06-2017): (This Release has a new kind of ramdisk, so use only on AOSP 7.1.2 r12 and newer. Don't use with AOSP 7.1.2 r8 and older)
https://www.androidfilehost.com/?fid=889764386195913124
r572Full (17-07-2017): (This Release has a new kind of ramdisk, so use only on AOSP 7.1.2 r12 and newer. Don't use with AOSP 7.1.2 r8 and older)
https://www.androidfilehost.com/?fid=745425885120750030
r574Full (15-09-2017): (This Release has a new kind of ramdisk, so use only on AOSP 7.1.2 r12 and newer. Don't use with AOSP 7.1.2 r8 and older)
https://www.androidfilehost.com/?fid=745425885120763772
INSTALL
Flash the Glitch zip with TWRP
Follow the Wizard to customize settings and flash the kernel
Reboot
You can tweak multiple options of this kernel with TricksterMod, FauxClock, Kernel Adiutor, Synapse(r500 and up, definitely recommended to get the most available options) or similar apps. (They are all available on the PlayStore)
FAQ :
About this build
This builds is using Aroma Installer so you can tweak various options at flash time. At the end of the process, a file containing your settings will be created (/sdcard/glitch-settings.conf). This "full" builds is also able to restore your settings from Aroma after a rom flash or wipe for example.
This builds is coming with a custom Synapse support to let you tweak all the core options on the fly once booted.
The default settings applied are as follow :
- 1.7GHz max CPU freq (from 1.5GHz stock) / 1GHz max CPU freq when the screen is off / "Balanced" L2 OC
- msm_hotplug driver in place of msm_mpdecision
- 450MHz max GPU freq (inline with other Snapdragon 600 devices - from 400MHz stock)
- Safe CPU and GPU undervolting for lower heat and power consumption
- Deadline I/O sched / Interactive CPU governor
- Doubletap to wake and fastcharge enabled (Doubletap to wake will slowly drain power during suspend, so disable it if not used)
- Everything else is kept stock
What do I have to do to use F2FS on one (or more) of my partitions ?
First, BACKUP your data if needed, especially if you're planning to use F2FS on DATA partition, as changing filesystem will wipe the partition. Change partition formats as needed in your recovery. It is NOT recommended to convert system partition as F2FS as it'll be slower than EXT4 to begin with (as the partition is mostly read only) and will alter compatibility with many roms (especially CM/LineageOS based). The last thing to do is to flash any Glitch kernel with a revision number past r150. You can restore your settings from SDcard if any, the install process will detect the partitions and modify the ramdisk accordingly so you can finally boot and use your fresh FS.
What L2/cache OC setting should I use ?
This setting will overclock bus speed and RAM so it's a bit delicate to tweak, yet it can give a nice "free" global performance boost. A simple test to check for stability is to run the camera app 3 or 4 times in a row while waiting for 10 seconds between each launch. If your devices freezes, it's unstable ! It's also the only setting you can't change on the fly once booted, either from Synapse or sysfs, and requiring a reflash (using Aroma or changing the value in /sdcard/glitch-settings.conf).
Let me give you some details about the available settings so you can choose wisely :
Stock (1.13GHz-4.26GBps) is the regular, out of the box, non OC setting.
Improved (1.19GHz-4.26GBps) is the same as "ElementalX" setting in Flar2's kernel.
Balanced (1.22GHz-4.66GBps) is the same as "Ultra" setting in Flar2's kernel.
Fast (1.35GHz-4.66GBps) is a nice jump over "Balanced", yet stable for most devices. A kind of sweet spot.
Extreme (1.43GHz-4.80GBps) is were most users will start to get issues. Provides a great boost if stable.
Glitchy (1.49GHz-4.80GBps) pushes your hardware to the limits. Will be unstable for most devices.
XDAevDB Information
Glitch Kernel for the MeMOPAD 10 FHD LTE - ME302KL
Contributors
Tk-Glitch, Google, animania260, CyanogenMod, TeamDouche, flar2, Faux123, franciscofranco, Showp1984, Team-Hydra, sixstringsg, Poondog, ZeroInfinity, Fluxi, arter97, neobuddy89, alesaiko, 228aye, AndreiLux, amarullz ,followmsi, and all my community
Source Code: https://github.com/yatto/DUMA_GLITCH_AOSP
Kernel Special Features: CPU OC/UV 2.3 GHz, GPU OC/UV 627MHz, FauxSound, S2W/S2S/DT2W, Bus speed OC
Version Information
Status: STABLE
Last Update 2017-09-15
[TAG]memo-pad-fhd10[/TAG]
@The Flash: Please can you make a ROM section for ASUS MeMOPAD 10 FHD (Me302KL) ? I made several Rom and kernels. All the treads are in Android General Section. Thanks !
@yattodettaman
Hi there
You may link your Duma tree as well in case you had some adaptation to do versus flo tree. If you didn't, well, that's fine :good:
Tk-Glitch said:
@yattodettaman
Hi there
You may link your Duma tree as well in case you had some adaptation to do versus flo tree. If you didn't, well, that's fine :good:
Click to expand...
Click to collapse
@Tk-Glitch Nice to se you here !
Thanks for your work ! It's amazing !
The duma tree is here : https://github.com/yatto/Glitch-for-DUMA
Or if you prefer here: https://github.com/yatto/Flo_AOSP/tree/master with the my last two commits (you'll see them) that make all modifications to make your glitch tree ready to run on duma devices !
Cheers !
@yattodettaman
Great :victory:
Thanks for your work as well !
UPDATE
Wonderful kernel. Fully customizable with sinapse. Good job @Tk-Glitch
Update to r566.
Download on 1st post
Update to r570.
Download on 1st post
Updated to r572 https://www.androidfilehost.com/?fid=745425885120750030
Update to r574