Hello everyone,
first of all, I am new on this Android world, so, any basic question I post, I ask for understanding in advance.
Trying to root my Viewpad 7 (Froyo 2.2), I come across to GingerBreak, I run it and it sucessfully root but it killed my Wifi (that's all connectivity I used, I have no mobile data plan)
as I wanted also to try new rooms, and flash a new one seems to be a only solution for the wifi problem (I have try factory settings without success). I come across Rom manager,
I download and install ROM_Manager_Premium_v4.3.2.3.apk from SD
and download CleanViewpad7_signed_v1.0.zip to my sd card
If I try to flash ClockworkMod Recovery from ROM manager, i get:
"Error while downloading from the server. Please make sure you have a stable internet conection ..." but that's no possible as I have no WIFI in my viewPad7 after root!
If I try to Install ROM from SD card (from Rom manager), the device restore in "Recovery mode" of "Andoid system recovery <3e>"; and it brakes with message "E:signature verification failed".
I have donwload it from several servers (http://forum.xda-developers.com/showthread.php?t=1168562), and all give the same error mesaage
I try to search for manual mode to install clockwork (http://forum.xda-developers.com/showthread.php?t=755379) but I can not find a way to go.
"wipe data/factory reset" inicializate the device, but it doesn't help with the wifi. it keet saying scaning->disconected->scanning->disconected ... (and of course, my wifi conection is set to remember with the password memorized)
In the cofig menu, i can see:
baseband: PR3.7_128
Kernel Apps_2.6.32.9
Build 4027_3_16R
In the FTM mode:
SWver=3.16R
Model:FM6-0001
HWVer:106
what can I do?, I just have a 7inch no apps-no connection beautifull "thing"
More: I have try two other Rooms:
EUViewpadV1.4.zip
Viewpad7 Stock EU 2.2 +rooted+CWM.zip
nothing works, signature verification failed
InTheater said:
Hello everyone,
first of all, I am new on this Android .... Trying to root my Viewpad 7 (Froyo 2.2), I come across to GingerBreak, I run it and it sucessfully root but it killed my Wifi (that's all connectivity I used, I have no mobile data plan)
baseband: PR3.7_128
Kernel Apps_2.6.32.9
Build 4027_3_16R
SWver=3.16R
Model:FM6-0001
HWVer:106
what can I do?, I just have a 7inch no apps-no connection beautifull "thing"
Click to expand...
Click to collapse
Okay, you willl be fine - just need to flash & restore it first to factory/stock ROM first, then root it and go from there - here are the steps that I would suggest:
First, save anything important on your mSD card if you need to, perhaps to a USB drive and/or computer's hard drive.
Next, use this link http://forum.xda-developers.com/showthread.php?t=1260463 to download - for the stock ROMs from Viewsonic.
The newest one is for newer ITE hardware VPAD7 (and, I believe yours is NOT if you could get CleanViewpad v1.0 to boot up & activate the screen - and a number of users are having trouble with wifi ....) To override that signature verification error message that you get, look into CWM (I'm using v3.0.2.8) under Apply update from .zip file on SD card, and there's a "toggle signature verification" switch - change it and trying applying the zip file again to flash - it should work, as I recall. Before that, make sure you wipe system/cache/dalvik & reset data, etc. for a clean(er) new installation.
FM6-316Q-*.nb0 should work with earlier, non-ITE Vpad7 and so should FM6-3310-*.nb0, whereas the FM6-3350-*.nb0 should be for newer ITE devices with either HWver 107 and/or (some) HWver 106.
To flash it, you CANNOT use CWM but must download the SUTL3 (v1.7.9 worked for me) - read & following the onscreen warnings/directions and it should be finished in less than 10 minutes (have the Vpad7 fully charged first & do NOT need to have the mSD card installed)
When it's finished, reinstall the mSD card, take a deep breath & reboot/restart, and you should be up & running with the stock ROM in a few minutes - if so, check your wifi connectivity first before going any further. Start with 316Q ROM first and if it's good, you might want to move up to 3310 next (it's newer) & recheck wifi connectivity. STOP then, as yours is non-ITE and the 3350 will NOT work. You can then flash CWM and/or root it - with SOC or GB methods, etc. etc. which you're familiar with.
I had no problems with wifi connectivity and/or 3G data (prepaid GSM 3G coverage) running the Froyo Enhanced custom ROM (non-OC version since I have ITE hardware) OS 2.2 - However, I'm running stock ROM OS 2.2.2 rooted and wifi is perfect for me. (I'm written up a quck tip/guide also - in case you didn't come across it while searching for answers) http://forum.xda-developers.com/showthread.php?t=1264647
Lastly, TJ_Style's FM6 ROM w overclocked kernel should work for you as well, it's OS 2.2 but I patched the boot.img with my saved newer 2.2.2 ITE kernel and got it working too, and, no issues with wifi access at all.
In short, check & change your Signature Verification options under CWM and try again, and, if not - restore by reflashing with SUTL3 a factory *.nb0 file, then - proceed from there.
Good luck, have a bit of patience - it's both fun & exciting, challenging & disappointment often followed by the joy of luck & success. Let us know how it go & write down any error message(s) so we can help figure it out together - plenty of "newbies" been around but still stranded at times.
Regards -
Thanks, SUTL3_v1.7.9 and FM6-3310-0-5029-A02.nb0 works like a charm, easy and bring back my ViewPad7 to work,
for anybodies info, that change my ViewPad to:
Android version : 2.2.2 (from 2.2)
Baseband version PR3.7_128 (same)
Kernel Version Apps_2.6.32.9 (same)
Build Number 5029_3_310 (from 4027_3_16R)
I got encouraged, and I try FM6-3350-0-1008-A01.nb0, that gives me:
Android version : 2.2.2 (from 2.2)
Baseband version PR3.7_128 (same)
Kernel Version Apps_2.6.32.9 (same)
Build Number 1008_3_350 (from 4027_3_16R)
Swype included !! (seems a little odd and disordered the configuration process, so skip it)
what means ITI / non-ITI ?
languajes: both nb0 are English/Spanish/French only
now I will start with rooting and so, I will let you know
once more, many thanks.
Wonderful, we are all glad to know that you had success. Is your wifi working once again with either stock unrooted ROM?
Once rooted & CWM reinstalled, do a backup first to save those *.img files, etc. so that you can easily restore/go back later on if necessary.
As I said, check out Enhanced Froyo and TJ_Style's FM6 custom ROMs, both of them should work nicely for you - including wifi (I believe, as least on mine - both solid signals in both G and N routers, WEP & WPA-2 modes. (Also, try open or unsecured mode)
Happy flashing ....
YES !!, wifi is working back to normal. At least sometimes (I have need to re-flash few time already, it has stoped working few times more, and not becouse of rooting, just installing apps from market)
I have also encoutered the next problem : http://www.youtube.com/watch?v=6XuccAxXY_8
and that shouldn't be normal behaviour?, isn't it ?
try with diferent room or return to viewsonic ?
by the way, what ITE means ?
thanks once more
InTheater said:
YES !!, wifi is working back to normal.
I have also encoutered the next problem : http://www.youtube.com/watch?v=6XuccAxXY_8
and that shouldn't be normal behaviour?, isn't it ?
try with diferent room or return to viewsonic ?
by the way, what ITE means ?
Click to expand...
Click to collapse
ITE refers to Panjit Touchscreen (Multi-Touch Resistive) used on newer Vpad7 built & shippped vs. older hardwares used on earlier models.
On that subject, I've looked at a # of youtube video reviews & posting about the device's orientation/rotation issues, and it seemed to me that it prefer to be in a landscape mode. But, there are times where we wanted to have a choice, turn it 90 degree for a vertical or straight up - not so sure it's 99% hardware problem - rather, problem caused by a mix of Android codes & Apps used. Some were defective but that's a production & quality control issue, so, anyway.
I'm not sure after seeing at your YT video what the problem is, please describe & I will have another look with my thoughts on it.
Does it happen with the stock/factory ROM or only with the ROM being runned now - I would flash a different ROM to compare the results.
Sending it back to Viewsonic is an option but you will be without its use for 2 to 4 weeks (usual timeframe, could be longer) & deal with packing, insuring, shipping & waiting - but, if it's "bad" - get authorization & exchange it or repaired.
Regards !
Bad news, as later day, wifi come alive, it went down sometimes, and as I was trying application I flash the three diferent factory rooms few times. What I didn't notice is that the wifo was disconecting more and more often: now it does connect at all.
As said, I have try the three diferent ROM in viewsonic, and also an app called FixMyWifi, nothing helps, wife is all the time "Connecting..."->"Disconected"->"Searching"->and so on
about the strange behiviour of the screen, the matter is that as soon as using two fingers, the right one, can not be in lower position than the left one. So forgot about plenty of games, drawinf with two fingers, dificulto for rotating maps (when the rotation of finger goes beyond 90 degres)
And one of the reasons I bought it is my little boy, explain that to a children of four years..., in deed he found it as "that does work well, the tank does not follow my fingers"
so, as a multitouch is basically pointless if you have to care your right finger does not go bellow your left one ...
Anything to do with the Wifi ?
rooting may help in some way?, and some terminal comands?
I am willing to try, I am just in the point before return it as faulty device.
Many thanks for all the help given.
InTheater said:
What I didn't notice is that the wifo was disconecting more and more often: now it does connect at all .... try the three diferent ROM in viewsonic, and also an app called FixMyWifi, nothing helps and so on .... as a multitouch is basically pointless if you have to care your right finger does not go bellow your left one ...
Anything to do with the Wifi ? I am just in the point before return it as faulty device.
Click to expand...
Click to collapse
Thanks for clarifying and I looked at the YT video again - perhaps you would be better off getting Viewsonic for authorization to return for repair or exchange it. On my device, the screen is responsive 98% of the time but I do realize that sometimes, when we're playing Angry Birds, that it too doesn't always readily respond to commands or launch the bird shots .... Not a big deal for games, it will usually get going again - worst case, use the Go Back key & restart the level - I figure that it could be a combination of the Froyo or Android codes written for the OS and/or along with the Angry Birds gaming itself.
Afterall, my "regular" & 2 years old smartphone, HTC Eris running a nearly identical CPU & configuration is running custom rooted GingerBread ROM - and, is must better & responsive in overclocked mode. The Vpad7 will not, I feel, be running Honeycomb but let's hope that some of the veteran xda developers will soon release a working GingerBread ROM - perhaps it will fix many of the issues across the field, so to speak. (or, if Viewsonic will release it as official update .... wishful thinking, huh - but !)
On the wifi issues, have you tried doing the SuperOneClick and/or GingerBreak apk to root, and then flash TJ_Style's custom FM6 ROM - http://forum.xda-developers.com/showthread.php?t=1264647 - this OC version with WiFi fix might work for you without any mods (patching or zip flashing the 2.2.2 boot.img)
On wifi configuration itself, is this happening with different routers - "older" G mode or newer N (faster) routers, unsecured or open network or secured (WEP, WPA or WPA2, etc.) - any issues on the host computer/router's firewall blocking ? Can you log in at a public hotspot or cafe like Starbuck ?
Go into Settings > Wireless & network settings > Wi-Fi settings > and, then, tap the Home key (the bottom of 4 keys on the device - held in landscape mode) and you should see "Scan" & "Advanced" - does it pickup a decent signal ? Click "Advanced" & look at your "Wi-Fi sleep policy" - mine is checked for "When screen turn off" - tried "Never" or "Never when plugged in" - any difference ? If you get this far, you might want to try to set up & Use "static IP" instead of using dynamic ip addressing that these devices usually count on .... it's a bit of work, but might help to "zoom" into your own router only.
I use "Wifi Analyzer" v2.5.13 from Kevin Yuan (Google Market) to help scan the spectrum for signals and possible interference, which sometimes do happen - and moved 1 of our 2 cable broadband router to a different channel so that all of our wireless (up to 15 of them, yes) devices around the house can easily connect to the hotspots. (Reading posts @ other forum sites & ran my inSSIDer v2.0 from Dell laptop for baseline, it scanned 17 active APN's with varying signal strengths, our Sony W995 picked up only 6 signals with 3 good ones, the HTC Eris picked up 6 signals also with 3 good ones, and the Vpad7 only 3 signals, 2 of them from our own indoor G & N routers plus 1 from neighbors that's marginal. It's safe to assume that our device's internal radio receiver or Baseband isn't very good with reception to begin with - you might need to flash a different "build" like mine to give it a try - and try switching your wifi channel.)
Just some of my thoughts on the wifi problem as I do run into signal problems myself every so often installing a new device or configure a guest's new gadget at home. If all else failed and along with the touchscreen problem, then I would say get it fixed via repair or exchange from Viewsonic, and then .... (a few weeks later, upon its return to you - happy rooting & flashing, etc.)
Letitride said:
Thanks for clarifying and I looked at the YT video again - perhaps you would be better off getting Viewsonic for authorization to return for repair or exchange it. On my device, the screen is responsive 98% of the time but I do realize that sometimes, when we're playing Angry Birds, that it too doesn't always readily respond to commands or launch the bird shots .... Not a big deal for games, it will usually get going again - worst case, use the Go Back key & restart the level - I figure that it could be a combination of the Froyo or Android codes written for the OS and/or along with the Angry Birds gaming itself.
Click to expand...
Click to collapse
Thanks a lot, that I have done, and ask ViewSonic for replacement, I hope they return me one fully working (by the way, sorry for so late response, I have been for 2 weeks out)
Letitride said:
Afterall, my "regular" & 2 years old smartphone, HTC Eris running a nearly identical CPU & configuration is running custom rooted GingerBread ROM - and, is must better & responsive in overclocked mode. The Vpad7 will not, I feel, be running Honeycomb but let's hope that some of the veteran xda developers will soon release a working GingerBread ROM - perhaps it will fix many of the issues across the field, so to speak. (or, if Viewsonic will release it as official update .... wishful thinking, huh - but !)
Click to expand...
Click to collapse
yes, it seems that the viewsonc doen't have so good hardware after all ...
Letitride said:
On the wifi issues, have you tried doing the SuperOneClick and/or GingerBreak apk to root, and then flash TJ_Style's custom FM6 ROM - http://forum.xda-developers.com/showthread.php?t=1264647 - this OC version with WiFi fix might work for you without any mods (patching or zip flashing the 2.2.2 boot.img)
On wifi configuration itself, is this happening with different routers - "older" G mode or newer N (faster) routers, unsecured or open network or secured (WEP, WPA or WPA2, etc.) - any issues on the host computer/router's firewall blocking ? Can you log in at a public hotspot or cafe like Starbuck ?
Go into Settings > Wireless & network settings > Wi-Fi settings > and, then, tap the Home key (the bottom of 4 keys on the device - held in landscape mode) and you should see "Scan" & "Advanced" - does it pickup a decent signal ? Click "Advanced" & look at your "Wi-Fi sleep policy" - mine is checked for "When screen turn off" - tried "Never" or "Never when plugged in" - any difference ? If you get this far, you might want to try to set up & Use "static IP" instead of using dynamic ip addressing that these devices usually count on .... it's a bit of work, but might help to "zoom" into your own router only.
Click to expand...
Click to collapse
about the wifi issue, I have try all the steps you mention before, nothing helps with my router (deliver by the telephone company). The only thing that works, sometimes, s turning off the router for several seconds, then it connect again. As absurd it sounds, it looks like the viewpad doesn't disconnect from the router even as turned off, so the router doesn't allow to negociated again a conection (and it keeps it in connected device while the viewpad is reseting or turned off)
I have try connecting a Linksys Wi-fi and connecting trought it : WORKS GREAT.
Trying in different locations, some of them same problem as the router, others works perfectly.
Solved for home with second wifi-point, I see myself one day asking Starbuchs guy to reset their router...
Letitride said:
I use "Wifi Analyzer" v2.5.13 from Kevin Yuan (Google Market) to help scan the spectrum for signals and possible interference, which sometimes do happen - and moved 1 of our 2 cable broadband router to a different channel so that all of our wireless (up to 15 of them, yes) devices around the house can easily connect to the hotspots. (Reading posts @ other forum sites & ran my inSSIDer v2.0 from Dell laptop for baseline, it scanned 17 active APN's with varying signal strengths, our Sony W995 picked up only 6 signals with 3 good ones, the HTC Eris picked up 6 signals also with 3 good ones, and the Vpad7 only 3 signals, 2 of them from our own indoor G & N routers plus 1 from neighbors that's marginal. It's safe to assume that our device's internal radio receiver or Baseband isn't very good with reception to begin with - you might need to flash a different "build" like mine to give it a try - and try switching your wifi channel.)
Just some of my thoughts on the wifi problem as I do run into signal problems myself every so often installing a new device or configure a guest's new gadget at home. If all else failed and along with the touchscreen problem, then I would say get it fixed via repair or exchange from Viewsonic, and then .... (a few weeks later, upon its return to you - happy rooting & flashing, etc.)
Click to expand...
Click to collapse
so, waiting for Viewsonic to replace my viewpad, I will inform as I have a new one in hands.
thanks a lot !!
can someone plz help me i am trying to flash this viewpad7
i get this error
error code:0x4000
error:task 2 of 3,download image fail,
error:device_not_configure (0x4000)
can you plz help me
thanks
To see this address
http://forum.xda-developers.com/showthread.php?t=1433052
Good luck
Hussein
First of all I would like to apologize for not so perfect English
I have U8650 and i would like to make this topic general topic for it. I know there are few topics but there is no much info in them.
I have made same topic on croatian forum for phones so i think it will be better if its on xda because there are much more people that are good in cooking cracking etc.
So lets begin
Detailed specifications can be seen on the LINK, however, the battery is 1400mAh[/ B] and not 1250 (i have sent email to gsmarena to change it but nothing hapend...)
ROOT and the original ROM
After playing with the phone I wanted too root it, after a good deal of trouble, and around 40 readed topics (without overdoing it) I came up with some knowledge, of course the problem is that the phone is currently on only few markets. (spain, croatia, turkey, australia and china i think)
To root U8650 you should flash it with original Rom, Spanish devices dont need original rom to root dont know why it is but it is
ROM
It is necessary to download an official ROM
LINK
After you download it unrar it and dload folder copy to memory card
Path should look like \ dload \ update
to flash device you need to
turn it off
remove the battery for 5 seconds
put the battery back in
press the buttons "VOL +" + "VOL-" + "ON" (all three keys at once)
and will start automatic firmware upgrade
for 3-4 minutes cell is debranded
If you get error not found firmware that means that you did not put the firmware on the SD card like you should (I got it a few times) just off the device and repeat the procedure.
root
After flashing unbranded firmware we can throw at root
software needed for the root LINK
This is similar to debranding.
download root file
Put it on SD card
turn off the phone
remove the battery for 3 seconds
Press "VOL +" + "ON" (without the vol-)
When you open the "bios like" menu use the volume keys up/down to select the update from memory card called root
after this procedure just reboot the phone and you have rooted phone
UNLOCK
My wife is on vip network so I had need to unlock cell
Recommendation for Tibor Szabo's
[email protected] [/ email]
contact the man, he tells you to pay € 13 at [email] [email protected] [/ email]
Send him mail with the payment for approximately 12 hours with you (he said 2-3 days al always come to 24h)[/SIZE]
if this is forbiden on xda i will remove it
If you have any questions please ask, this all is wrote on xda and some other forums i just put all together
[B]Do not think i am responsible if anything goes wrong I have done in exactly those steps and everything works normally. Everything you do yo do at your own risk.[/B]
So: D after a slightly longer introduction with u8650 came the day to put Custom rom.
Of course, for custom rom you will need root thus described above tutorial.
After puting custom rom phone is like 20% faster
few main features
Integrated flash (load all ads from the flash) loads test flash from Adobe i didnt test it much more because yesterday i put custom firmware
new driver for the camera from turkcell that means 5MP camera resolution
Better battery life
overclock processors at 780MHz (you can set it manualy)
Here is the complete list of modifications that is taken with [URL="http://www.htcmania.com/showthread.php?t=262489"]LINK[/URL]
In principle, this entire tutorial is taken from [B]Zadkyn[/B] and translated becuse he is hard spanish guy nothing is on english he is not very good at answering questions but thanks to him we have custom roms and all the improvements.
list of improvements (in English)
[QUOTE]Overall performance improved a lot (it is also the little battery somprendente Spends now even with the 3G)
-Changed icons graphically and manufactures factory setting, added percentage battery icon factory
-Added adobe flash compatible and running (with the strip overlock well)
-Lower spending on drums (set the minimum cpu for this)
-Restored and changed some other applications (all zipiling passed by lower consumption of RAM)
-GPU rendering enabled
Battery-drain slower, less consumption.
Grate black-on camera to make photo with overlock fixed
Overlock-stable up to 780 (no more restarts) to give to more than 722 problems.
-Added and removed other applications
Overlock-Kernel to 844
Unlocked-Kernel
-Operates any headphones
New menu-configuration, more optimized and icons removed rom China.
Bootanimation custom-added, now you can put your wish bootanimation
-Added run-part BusyBox
-Added Apps2SD
Added bash-shell
Zipalign all-in app
New-look graphic
Huawei-optimized new launcher (and consumed as Zeami or less)
-Fix bootanimation
Init.d-scripts folder added
Scrip-added ramscrip
-Applications optimized to consume less RAM
Boot-unlocked
-Data Applications (to uninstall and market updates)
Root-shell
-Added new root
Application-Acrchivos disassembler (ODEX files only is crap and problems)
Removed sea processes on startup
-Original Sources
-Some of deleted applications including Telstra
-Optimize graphics
New Market-added
New menu-bright
-Back to the white menu
-Implement improvements in order to run 3D accelerated 3D notification bar
Added applications-highly recommended.
-More RAM optimized for removing (less processes on startup)
Optimized sub-mic, and works well, you can check any call recording.
Completely changed-Topic icons like systems.
-Removed garbage Telstra [/ color]
, As implemented VoIP, voice dial ip menu to call.
Configuraccion-optimized menu and changed the color to black.
To-quality photos and video recording improved.
Jpg Image-Viewer improved.
-Pixel camera increased significantly (software, which the Turks have for any)
Best answer-ram and optimization (42m).
-Red 2 g 3g and improved (more coverage)
Energia-saving implemented.
Netfilter-range increased.
Less force-closure errors in some applications as well as more support.
-Some more things.[/QUOTE]
I put 1.5 version because it has corrected a couple of bugs.
Biggest object is that he removed default camera app imho it's not a problem because you can instal lg camera.
So here is tutorial
What you will not learn from linked topic (and I found out by sheer luck) is that you need to install drivers and custom "bios" to be able to put custom rom
So first things first
You will need to do procedure in this topic [URL="http://www.htcmania.com/showthread.php?t=256095"]LINK[/URL]
First download the driver for Windows 7 [URL="http://www.mediafire.com/?3bvp3p42t4iqwt2"]LINK[/URL]
So these are the drivers that you install and run you will have a screen with two options press instal drivers
If you have XP and these drivers dont work download this [URL="http://www.mediafire.com/?20qkr711ceuna0n"]LINK[/URL]
I have W7 so I leave to you if this is working for xp (it should work because no one has yet complained )
The second step is to download this file [URL="http://www.mediafire.com/?k421vgl3xy1fgpa"]LINK[/URL] unzip it and run Instalador.bat
You have fine hacker green screen and bunch of Spanish. luckily it doesn't interest us. Go to the next step and that is putting the phone in Fastboot mode.
The third step unplug the battery cell out/in pressing VOLUME - (or the volume down) and the power button and hold for 10 seconds.
it will show you only the Huawei logo and it should only show you that.
Step Four Connect the mobile phone with the USB cable, wait until computer detects it and after a few seconds go ti fine spanish green screen and press any key
It will flash "bios" of the phone it should be ready in a minute or two there is no hurry.
then reset the cell and you should have a fine new "bios".
Check this by turning off cell battery out / in and press the Volume + (volume up) and the power button for 10 seconds.
It should appear with orange letters like from the picture
[IMG]http://postimage.org/image/2d31ltan8/[/IMG]
After you have fine new "bios" you want to put fine new rom
The first step with this rom download [URL="http://www.mediafire.com/?8qd05qhv5flhips"]LINK[/URL]
The second step is to put the zip in the root of your memory card.
The third step going into the BIOS mod So turn off the cell battery out / in the volume + power button for 10 seconds.
You get orange letter menu now navigate with the volume + and - and with the power Buton you confirm it.
The fourth step choose the factory data wipe, then wipe the cache and then advanced wipe devil cache (not the exact name but you will seen it)
Each time when you choose wipe you need to confirm it, always navigate to yes i want to wipe.
Fifth step Return to start of the BIOS and select the custom recovery and navigate to the zip file called zadkin and select it.
When you choose it will start to flash for me lasted about 4minute when it's finished, reboot the system and if everything went well (and there is no reason why not) you will get the boot menu with zad logo.
For first time cell loaded few minutes so patience.
After that you have a nice Costum rom that is faster and more economical with better battery life stronger processor and better camera
If you have questions feel free to shoot.
The same as in the first part of post you do all on yours risk and I am not responsible for any problems and errors. I did everything according to these instructions and I got what i wanted.
[B]CODES[/B]
codes for the service menu
[B]*#*# 2846579 #*#*[/B]
code for the info on your phone
[B]*#*# 4636 #*#*[/B]
All of this is wroted on few forums and i just wanted to put all in one place on the most visited forum for android (xda)
Also i would very like if someone with more expirience can read this tutorial and suggest something.
one more thing that i left out is RAM limitation and i hope to get some answers about that.
also if this helps someone feel free to thank me
Best regards
just flashed your custom rom without problems. its amazing what people can do..!! it seems based on the yoigo firmware and you have english and spanish as languages. everything you need is included filemanager app2sd etc. i like it very much.. thanks.
edit: could you kindly tell what the flashing of the bios (with pc) exactly is for?! thanks
If you dont flash that bios you cant wiPe devilk cache and you cant instal modified rom so basicly puting new bio is must for moded roms
It will be great if someone else can try this
As for wiping the data, there was only one thing possible to wipe. everything else was just a line of "NO" without option to change it.
I now have like 3 programs running in background thats cool... and of course its cool that many programs are removed that cant be removed otherwise (like documents2go trial)
But thE stock yoigo firmware is good too... It already comes with the possibility to install apps to SD u dont need extra program for that
EDIT :and i just come back to phone.. i left it on charger over night.. and its in the orange BIOS MODE !!!! so it crashed i guess ??? bad
EDIT2: Couldnt access 3g internet even tho i had the right profile .... will test some more
Unofrtunately the custom ROM has still a lot of bugs, be careful :-(
yeah its BS... i am going back to original yoigo at least there i can make it install all aps to SD automatically .... this hacked firmware cant even transfer most new aps to SD..
i hope i will have no problems cos of flashed bios...
thanks anyways both of you
edit: 2 more bugs.. adblock dont work (some java error crash) and the 11mb adobe flash cant be copied to sd or removed at all
out of 27 apps (a few downloaded by me) 7 can be copied to SD and 20 cant
is there anyone who tested cyan mode for this phone ?
this guy
http://translate.google.de/translat...ania.com/showthread.php?p=2880783#post2880783
check that forum out they also have Cyanogen7.2-benru89 [Android 2.3.7] [LEDs] !!
do anybody knows how to make back key to just leave app and not go to home screen
i have instaled cyan 7.2 spartan 1.2 ver and when i enter app drawer and start app lasts say camera i push back key and it lands me in home screen and not in appdrawer.
hope you understand what i am saying
problem
I had a problem when i tried to root my phone. I copyed the zip file into my sdcard but it could find the file.
I got other things in my sd if it matters idont know.
I would be very thankfull if someone could help me!
huawei u 8650 phone is dead
hi ,after installing official firmware ,my phone got brick.i also made backup with cwm recovery,but now my phone only show black screen only alittle blink of light when i push power bottom,how can i solve this problem
I don't understand, if you root your phone yo unlock it from its carrier? I mean, free to use with whatever sim card from any mobile company?
Didnot work on U8652
12/14/11: I tried the rom upgrade on U8652 ATT fusion and received "install error' after unpacking.
Any suggestions?
12/15/11: I successfully installed the 'recoveryclockmod' after finding the proper android usb driver for winXp - 'pulse drivers'
then installed the custom rom. But the phone details on the installed custom rom says its a U8650 model not U8652.
Thanks OP
Thanks OP
I followed your instructions and installed recoveryclockmod and cyanogen_u8650-benru on my U8652. Now I finally have root and a nice ROM to play around with. Thanks OP
Does the root part work on a Huawei U8650 Sonic that came with android 2.3.5 and newer ROM ( U8650V100R001C343B851 ) ?
I need to root it to be able to use reverse USB tethering
dark0153 said:
Does the root part work on a Huawei U8650 Sonic that came with android 2.3.5 and newer ROM ( U8650V100R001C343B851 ) ?
I need to root it to be able to use reverse USB tethering
Click to expand...
Click to collapse
Try with
http://unlockroot.com/
From lastest version they support huawei U8650. You can always put recovery and custom rom (google htcmania or read first post)
sipe1 said:
Try with
unlockroot.com
From lastest version they support huawei U8650. You can always put recovery and custom rom (google htcmania or read first post)
Click to expand...
Click to collapse
unlockroot doesn't work, i tried the latest version (2.2) and i get the same error "Failed to get shell root !"
I have fried my U8650
I attempted a firmware update (official)... stage one completed... phone restarted and got stuck with a grey screen (no logo nothing just blank grey screen) all the soft buttons are turned on. constantly.
It wont go in to recovery, a simple touch to the power button turns it on and then it wont turn off unless I take the battery out.
I tried flashing with DC unlocker but my system wont detect it, I have installed the drivers provided at huawei site.
the phone was just a week old and am real pissed.
worst part, i did all that after reading this post
Anyone has any idea, how i can get it to work once again.
friedroid said:
I attempted a firmware update (official)... stage one completed... phone restarted and got stuck with a grey screen (no logo nothing just blank grey screen) all the soft buttons are turned on. constantly.
It wont go in to recovery, a simple touch to the power button turns it on and then it wont turn off unless I take the battery out.
I tried flashing with DC unlocker but my system wont detect it, I have installed the drivers provided at huawei site.
the phone was just a week old and am real pissed.
worst part, i did all that after reading this post
Anyone has any idea, how i can get it to work once again.
Click to expand...
Click to collapse
I didn't try this method and I'm only suggesting it because it sound like you almost bricked your phone.
You could try installing ClockworkMod recovery using fastboot (here is a guide for that androidforums.com/sonic-all-things-root/476263-root-guide.html just follow 1-9 ) and then flash the original rom for your phone (I found a list of stock roms here android.modaco.com/topic/350367-huawei-u8650 )
Dont forget to wipe data/cache before flashing the new rom ( this might be the cause for the state your phone is in now )
Update:
Got the drivers by installing hi space and letting it search for appropriate drivers. Worked real smooth.
Now Computer detects phone. But the instalador.bat keeps on searching for device :S
Stuck and stumped once again.
I want to believe but all I see is darkness... or a mildly lit lcd with greyness to be precise. thoughts, ideas anyone.
Thanks man. A ray of hope finally.
Only one problem.
My system won't detect the phone. When i plug it in via usb, it turns on. I mean all the buttons turn on, screen turns dark grey from dead black. But that is it. Computer wont detect it. I am running on windows 7.
Another system detected it which was running on XP but it wouldn't accept the drivers.
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
V.Mr.Gamer said:
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
Click to expand...
Click to collapse
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
V.Mr.Gamer said:
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
Click to expand...
Click to collapse
Ok i found another rom (the telecast one)
on installing it
touch is working again but the y axis is inverted
i used adb to get it fixed (and success)
on digging more
the soft buttons are not working
wifi is not working
g-sensor isnt working
camera not working
got root access
help needed
found The ROM (Firmware) SPEED PRO TAB(Care Solutions Tab)
I was googling out and found the perfect rom for my tablet
the Speed PRO Tab(Care Solutions Tab) Is a clone of COBY KYROS MID7042
MID7042 was written on the motherboard of the tablet
the site is
I CANNOT PASTE THE LINK SINCE I DONT HAVE PERMISSION
But Go to google search MID7042 firmware
and it is a flashmyandroid site
remove the "*"
just register/Login
and download the ROM on 2nd page
Flash it through LiveSuit(link on the same page)
and TADDA
IT Worked Like a charm
but i still want CM10 or AOKP 4.1.x for it
any help praised
Thankyou