hi,
i have a Generic - Tablet screen 7" Allwinner A13 1.0GHz CPU Android 4.0, 4 GB HDD 512 MB , and i used live suit to flash a rom, but the problem is that always when i try to flash a room the touch screen do not work, i am a newbie with this high tech stuff, if anyone could help me i would appreciate a lot .
i installed this rom <> A13-EVB-V1.0-20130926-Android4.2.2-Os-root-MaPan from this site >>>>http://www.androidtablets.net/thread...13-roms.72449/
and i tried to install some drivers of this link but did not worked, i dunno if i run it correctly, i simply downloaded and pressed run.exe in the file of the download, this is the site of the modules>>>http://forum.xda-developers.com/show....php?t=2447819
i also tried installed the FaaastJB v2.5 rom and the touchscreen driver did not worked and any of those modules worked. so if anyone could help me please write me ....
What touch screen fix worked for me.
I have an A13 running FaaastJB v2.5 and struggled for a long time getting the touch screen working.
The ROM I'm using came from
http://forum.xda-developers.com/showthread.php?t=2447819
The set of drivers that worked for me were the FOC110 which is the last of the SPECIAL TS modules listed
One time I had to load them twice in a row to get them working. It complains about missing directories when loading but worked for me.
Hope they work for you also
Related
my tablet specs.:
noname, 7", RK2918 Cortex A8, 512 MB DRR3, 4 GB, mini HDMI, mini USB, SD Card (external), camera 1 (front), wireless and audio from realtek, no bluetooth.
buttons: volume up and down, on/off, reset
original OS: Android Gingerbread 2.3.1
mainboard: M732HR_V1.2 20110921 (from PCB)
(updates made from external sd-card with "update.img", also supports flashing with RKFlash tools via usb)
----------------------------------------------------------------------------------
mtd table from original update.img:
initrd=0x62000000,0x500000
mtdparts rk29xxnand:
[email protected](misc),
[email protected](kernel),
[email protected](boot),
[email protected](recovery),
[email protected](system),
[email protected](backup),
[email protected](cache),
[email protected](userdata),
[email protected](kpanic),
[email protected](user)
----------------------------------------------------------------------------------
needed a firmware (stock or custom) to be able to use some apps etc, so i flashed the one given here:
RK2918 Tab Odys-Loox rocks with CyanogenMod 10 / 10.1!
(http://forum.xda-developers.com/showthread.php?t=2012654, beta build - v1.2)
after flashing completed, tablet hard bricked. no screen, nothing (even backlight of screen not working, so it is not a "black screen of death" but instead "death" only i guess :laugh: , though it reacts on charging with led)
anyone have any idea about what happened or how to recover it?
ps. atm i work on "29-30 pin shorted" thing (http://www.slatedroid.com/topic/41388-unbrick-instructions/) but not sure if it will work for me yet.
update
I was able to de-brick it (couldnt use "short 29-30 pins" thing, chips had a metal cover over them soldered to mainboard, I used reset button with volume buttons, I pushed them like crazy alot of times and somehow got rockchip usb flash state for once then re-flashed stock rom (I had rom-dump files and original "update.img"), it is working now with stock rom.
continued as follows:
1) Tried alot of other roms from similar tablets, some just stays at android screen, some works with corrupt graphics, etc
2) Oma_Odys_Loox_JB_CM10_4.1.2_v1.2 = killed the tab, debricked by luck
3) Oma_Odys_Loox_JB_4.1.1_v1.2.1a (with Oma_extSD_to_NAND_OTG_fix) = works till welcome screen, but touchpad not working so i couldnt check the system further more
4) Oma - Odys Loox GB 2.3.1 v1.3a = touchpad not working, and graphics weird (low color depth+some minor glitches on image), just waiting at main screen cause of touchpad, adb shell works (with root)
5) flashed original kernel over Oma - Odys Loox GB 2.3.1 v1.3a, screen resolution, color depth fine now, touchpad working too, but have problem with sensor, left-right or up-down shifted up to tablet position, trying to fix it
6) activated "ro.sf.hwrotation=270" in build.prop, sensor fine now. Only problem left is touch screen Y axis inverted
7) still working on Y axis issue, but weird thing is calibration works correctly, no inverted axis! and succesfull. but then I have to click upside for something downside or downside for something upside.
8) darn. it is not up or down. it becomes left or right if flip tablet to 1 side.
9) i decided that problem is about touch-driver and i dont have enough knowledge to fix it. left over tablet with factory rom, working but ehhh.
note:
thx to Oma7144, i learned few things from his/her posts, i try to find thx button now xD
Hello everyone,
Here is my problem of which I hope you can help me out.
I own a Allwinner A13 7 inch tablet, on which I installed the Cyanogen 10 mod (Due to restrictions I cannot place the link to the mod)
The problem is I probably installed the wrong touchscreen driver, so the tablet boots perfectly into the Mod but I can't do anything.
Normally it would be no problem to just put back my backup, but I can't get it to boot into CWM.
In the first place I rebooted into CWM to instal the mod by adding the following command through the "terminal app" before rebooting,
Command: "echo -e 'boot-recovery\0' > /dev/block/nandf; sync"
Now I cannot use the screen so i cant use the terminal.
I also cannot use ADB because USB debugging is standard switched of after flashing a new MOD.
Does anyone know if there is another way to get into CWM??
Thanks a LOT!
Thanks a lot!
I will have a look
Do you by change know where to get a working stock rom? I flashed one which i found using google a couple of times but it only results in a Boot loop (I have no luck at all!).
Thanks!
Update: found a stock version that works. But no my touchscreen is inverted.
Also I probably made another **** up, because I accepted the format option of Livesuit, so now I lost my backup.....
Hi
I have purchased a tablet that was sold with a problem of freezing occasionally. It was sold as a M009s ( no other info or box ).
It booted up and worked faultlessly for a short time and then sure enough it froze, I shut it down with the power button and it froze on boot up screen.
It occasionally booted up and worked OK but froze more often than not on either boot up or when in use.
There appears to be no info on the tablet as to its make so I checked specs on my tablet info and opened it up and got this info from inside.
My tablet info - Motoroler / Droid 2 Global - Android 4.0.3 Eng Snake 20120116.191929 SDK 15
- 800x480 dpi / Ram 448 / Flash 8GB / 1 core Arm v7 rev2 (V71) Exdroid / 1008Mhz
Main chip - All winner A10 c5036ca
Main board - Topwise A721-v4.2.0 ( 2012.03.26 )
I am quite new to tablet roms etc but managed to flash a new rom which I thought was the correct one using Livesuite.
The Rom was LY-F1 Allveiw Aldro speed by Seby
The tablet seemed to work fine but then froze up again.
It only occasionally boots up correctly but normally freezes on boot up screen or not long after boot up.
I don't know how to tell if it's a software or hardware problem being new to the whole Android O.S.
I have been chasing my tail trying to find a solution but am getting nowhere. Please if there is somebody that has any solution or can point me to a link related to the problem I would be much obliged.
Thanks Hopefully
Kev
Hi,
I have a Qware TB-9718D tablet (rebrand of ployer-momo11-speed) with RK3066 CPU and Android 4.04.
I've installed the CWM-ROM-Ployer_Momo11_3-0-8_M1_software_chinese-version_4-2-2_20130425-4-2& CWM ROM (Android 4.2.2) on the tablet and it boots just fine.
However, the touch screen does not seem to work anymore with this ROM.
I have tried two touch screen fixes (which were suggested on another site): one of which was the 907c_compatibility_1.2.0.zip
Both files did not solve the problem.
Does someone else have any suggestions on how to fix the touch screen with this ROM?
Could I for example extract the touch screen driver from the original ROM's lib folder and use it in this new ROM?
Thanks in advance.
Does anyone have any suggestions?
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
V.Mr.Gamer said:
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
Click to expand...
Click to collapse
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
V.Mr.Gamer said:
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
Click to expand...
Click to collapse
Ok i found another rom (the telecast one)
on installing it
touch is working again but the y axis is inverted
i used adb to get it fixed (and success)
on digging more
the soft buttons are not working
wifi is not working
g-sensor isnt working
camera not working
got root access
help needed
found The ROM (Firmware) SPEED PRO TAB(Care Solutions Tab)
I was googling out and found the perfect rom for my tablet
the Speed PRO Tab(Care Solutions Tab) Is a clone of COBY KYROS MID7042
MID7042 was written on the motherboard of the tablet
the site is
I CANNOT PASTE THE LINK SINCE I DONT HAVE PERMISSION
But Go to google search MID7042 firmware
and it is a flashmyandroid site
remove the "*"
just register/Login
and download the ROM on 2nd page
Flash it through LiveSuit(link on the same page)
and TADDA
IT Worked Like a charm
but i still want CM10 or AOKP 4.1.x for it
any help praised
Thankyou