[Guide]Unlock Bootloader for Noobs P769 - LG Optimus L9 P760, P765, P768, P769

Ok So Here Is The Link Might Say Still Uploading Depending The Time Your Reading I Will Post The Files I Use Tomorrow And Remember A Thumbs Up Both Here And On The Video Would Be Appreciated (; Good Luck
http://www.youtube.com/watch?v=WyNtFP_TkKc&feature=youtu.be
V20B Root Bin
https://drive.google.com/uc?id=0B059sYrh0T19S1hfN25fdnVUVWs&export=download
Files That Go On SD Card
https://docs.google.com/viewer?a=v&pid=explorer&srcid=0B059sYrh0T19RWFYcERIQVVoSkU
Root Guides
https://docs.google.com/viewer?a=v&pid=explorer&srcid=0B059sYrh0T19R1NPUkZEc240U0k
USB Driver And Text File Describing Locations
https://docs.google.com/viewer?a=v&pid=explorer&srcid=0B059sYrh0T19V1JSS0hNUWpDRnc
V20B KDZ
Wasn't Able To Upload Can Anyone Help Me out with this one? still struggling with internet problems...
All The Files In One Zip
Thank You ggfool
https://mega.co.nz/#!ElNxlS4C!Ko_1FSI68loOrkrQdYNutDqkQ2QHRX9vPe7MyXrkqNM
*OLD TUTORIAL*
Warning Just to let you know that this will Void your warranty you should already know that 
Also this may look really long but its short just somewhat really specific 
Hello Fellow Optimus L9 Users today I Bring you a tutorial on how to unlock bootloader the noob version for those who are new to rooting and stuff because there is another one that is more complicated and less specific but if you want to check it out heres
the link http://forum.xda-developers.com/showthread.php?t=2198114
Okay First to let you know that when you flash V20B_00.kdz the screen will get kind
of funky everything will be inverted and backwards so dont worry. And one more thing is
that when you boot up every single time after doing this the boot will be mirrored. Just
to let you know.
First Just want to thank "pinoyto" "Lelus" and "cmahendra"
Okay Now to Start Download the zip containing the files link here https://www.dropbox.com/s/uxwvkkp8yyyev0k/Bootloader Unlock .zip Files contained
in the zip are "Adb" "Recovery image" "V6.bin" and "V20_00.bin"
After youve downloaded extract the files to a folder for later use.
Now before we go to flash the V20.kdz enable "usb debugging"
Now go flash the kdz with this tutorial http://forum.xda-developers.com/showthread.php?p=36351786
1)Now after you've flashed then comes the screen problem just unlock and go throught the setup quickly
2) Connect your usb and make sure the usb debbuging icon pop-ups the little spider looking thing if thats enabled good
3) Okay next im not really sure if its needed but just do it change the usb
entrance to "LG Software Mode" to do this the simple way you need to disconnect usb and
connect again after than the options appear what type of usb entrance click on the back arrow
and it should select the "LG Software Mode"
4) Now we want to connect to the WiFi THIS IS NECESSARY FOR IT TO WORK go and connect to it
after that make sure you are connected by opening the browser or youtube and if a page or
video loads your set now go make yourself a coffee or some thing because now you have to wait
30 or more minutes
5) Ok now that the 30 minutes or more have passed you need to go to the downloaded files and move
the "Android" folder to your "C:\" drive "dont worry just has adb files" now open a command prompt and
type the following
"cd c:\Android"
"adb devices" to make sure your phone is connected a list of numbers should appear
"adb reboot oem-unlock" and your phone should then reboot
then the lg logo will appear then a mirrored confirmation to unlock bootloader just press
the "Volume Up" button and it will confirm it then hold the power button until it reboots
6) Now we need to go to "rooted 10g" again just go here http://forum.xda-developers.com/showthread.php?t=2173465
and follow every single instruction but when you are about to enter the flashing process instead
of "Emergency" mode you need to put it to "Diag" mode and then start the flashing process
7) After you are done with that you cant boot so you must perform a wipe and the way of doing that
is too have phone off hold "Power button + Volume Down + Home Button" then you should see
a android with the little globe and a loading bar after its done it will turn off then
now reboot and after it boot it will be mirrored you can fix that but in my opinion it is a little more confusing
because the screen is still messed up the whole left side is inverted with the right side but if you still want to remove the mirror
you must press the power button once to turn off screen then again to turn on and it will be fixed but the touch is still inverted
8) Now go through setup and enable usb debugging and then u need to go to the superuser app
and if you dont have it you did not do the root process correctly go to it again "and if you need help just pm me"
open the app and update the binary after that go to your computer and open command promt again
and enter the following commands but before you must put the v6.bin file to your external sd card it is in the downloaded files after you have put it to the root
of your external sd card enter the following commands
"cd c:\Android"
"adb shell"
"su" when you enter this go to your phone and accept the su request
"cat /sdcard/external_sd/v6.bin > /sys/devices/virtual/input/lge_touch/firmware"
after you entered the last command you need to close that command promt and open
another one and type the following commands
"cd c:\Android"
"adb shell"
"su"
"reboot" then it will reboot and the touch will corectly work remember the mirrored problem will continue
to occur on your phone like i said just turn off screen then turn it on and it will be fixed
Now you have unlocked bootloader 
If you want to install the cm10 rom the optimus L9 has as of right now you
have to do the following
1) Go to the app store and search for the app called "Nandroid Manager ROOT"
download the app and open it then go to flash recovery you must first put the recovery from the downloaded file to the
root of you external sd card and then go to the app and search for the recovery and flash it.
After you flash it you will have a recovery on your phone
(just to let you know it will be mirrored) but to boot to recovery you must turn off the phone
and then hold the "Volume UP + Home Button + Power Button"
now go download the cm10 rom from here " http://forum.xda-developers.com/showthread.php?t=2216542 " put the file to the root of your sd card and then reboot to recovery and then to flash you will need to "wipe system, wipe cache, and wipe dalvik cache then flash" after you flash the zip reboot and you will have CM10 Hope This helped
-Credits to geeshiet for still having a copy of my guide Thank You geeshiet

carloswii5: Thank You for contributing.

kevev said:
carloswii5: Thank You for contributing.
Click to expand...
Click to collapse
No prob
-SPQR

Many thanks for writing up this much needed guide!

Has anyone here tried design-extreme.net's method with ROM Toolkit?
http://design-extreme.net/unlock-bootloader-for-lg-optimus-l9-at-official-jelly-bean-firmware/
Sent from my Inspire 4G w/CM10.1

WordsworthESP said:
Has anyone here tried design-extreme.net's method with ROM Toolkit?
http://design-extreme.net/unlock-bootloader-for-lg-optimus-l9-at-official-jelly-bean-firmware/
Sent from my Inspire 4G w/CM10.1
Click to expand...
Click to collapse
Only works with P760
A Person Who Never Made A Mistake Never Tried Anything New. -Albert Einstein

carloswii5 said:
Only works with P760
Click to expand...
Click to collapse
So you or another user have tried it? Because it claims to work with the P769. Now, I know these things aren't always accurate, but I'm trying to ascertain exactly how you know that it only works for the P760.
Sent from my Inspire 4G w/CM10.1

WordsworthESP said:
So you or another user have tried it? Because it claims to work with the P769. Now, I know these things aren't always accurate, but I'm trying to ascertain exactly how you know that it only works for the P760.
Sent from my Inspire 4G w/CM10.1
Click to expand...
Click to collapse
Because the only L9 variant that came with the option to unlock the boot loader in the jellybean update was the P760
A Person Who Never Made A Mistake Never Tried Anything New. -Albert Einstein

carloswii5 said:
Because the only L9 variant that came with the option to unlock the boot loader in the jellybean update was the P760
A Person Who Never Made A Mistake Never Tried Anything New. -Albert Einstein
Click to expand...
Click to collapse
Ok, thanks. While I'm quite experienced with rooting and flashing for the HTC Inspire, I'm (clearly) very new to this phone, and LG's in general. So many thanks for the "noob tutorial."
Sent from my Inspire 4G w/CM10.1

WordsworthESP said:
Ok, thanks. While I'm quite experienced with rooting and flashing for the HTC Inspire, I'm (clearly) very new to this phone, and LG's in general. So many thanks for the "noob tutorial."
Sent from my Inspire 4G w/CM10.1
Click to expand...
Click to collapse
Yea I figured I would make one because some people were struggling with the other tut here on the forums
Anyone who has never made a mistake has never tried anything new. -Albert Einstein

Great guide! Thank you for consolidating the files and info so that I could complete the unlock.

Kid_Ding said:
Great guide! Thank you for consolidating the files and info so that I could complete the unlock.
Click to expand...
Click to collapse
Glad I could help
Anyone Who Has Never Made A Mistake Has Never Tried Anything New
-Albert Einstein

Okay so my wifi doesnt work..and it doesnt work at all when I do the unlock adb message. any ideas?

bratten2121 said:
Okay so my wifi doesnt work..and it doesnt work at all when I do the unlock adb message. any ideas?
Click to expand...
Click to collapse
I need more info just saying "my WiFi doesn't work" doesn't help me trying to help you....
Sent from my Cyanogen Running P769

Hey i figured it out, so I flashed v20b over v20d and I waitied about 45 mins with wifi on and still cant get this to unlock. I have also rooted my phone before this and tried flashing v20b again and still nothing happen. Is it too late for me to get this unlocked?

bratten2121 said:
Hey i figured it out, so I flashed v20b over v20d and I waitied about 45 mins with wifi on and still cant get this to unlock. I have also rooted my phone before this and tried flashing v20b again and still nothing happen. Is it too late for me to get this unlocked?
Click to expand...
Click to collapse
No its never too late but there must be something you forgot to do or did incorrectly did you run "adb reboot oem-unlock" before connecting to wifi and waiting at least 30 min?
Sent From My Cyanogen Running P769

Just unlocked bootloader on my phone. Looks like having SIM card with data is a must. Tried all day yesterday on WiFi, never worked. Finally bought a SIM unlock code on eBay and used my StraightTalk SIM card. Reverted back v10G, set everything up (had to type APNs manually), turned WiFi off and verified that data works. Flashed v20B again, verified that WiFi is still off and data is on, waited for about half hour. Unlocked on the first try.
So whoever is having troubles, looks like you just need working SIM with data and WiFi it not really necessary.

nevkuril said:
Just unlocked bootloader on my phone. Looks like having SIM card with data is a must. Tried all day yesterday on WiFi, never worked. Finally bought a SIM unlock code on eBay and used my StraightTalk SIM card. Reverted back v10G, set everything up (had to type APNs manually), turned WiFi off and verified that data works. Flashed v20B again, verified that WiFi is still off and data is on, waited for about half hour. Unlocked on the first try.
So whoever is having troubles, looks like you just need working SIM with data and WiFi it not really necessary.
Click to expand...
Click to collapse
Alright thanks for letting me know I'll change it thank you
Sent From My Cyanogen Running P769

nevkuril said:
Just unlocked bootloader on my phone. Looks like having SIM card with data is a must. Tried all day yesterday on WiFi, never worked. Finally bought a SIM unlock code on eBay and used my StraightTalk SIM card. Reverted back v10G, set everything up (had to type APNs manually), turned WiFi off and verified that data works. Flashed v20B again, verified that WiFi is still off and data is on, waited for about half hour. Unlocked on the first try.
So whoever is having troubles, looks like you just need working SIM with data and WiFi it not really necessary.
Click to expand...
Click to collapse
I have straight talk tmobile sim with no apn setup and WiFi on for it to work for me.
I kept waiting 30 mins x3 because I had taken my sim and SD card out due to fear of damage. So I second that keep the sim in and WiFi on (made a guest ssid for one click connect).
@nevkuril do you have st att or tmo? If tmo, I know its late but the tmo sim works without the need for carrier unlock.
Sent from my LG-P769 using xda app-developers app

Kid_Ding said:
@nevkuril do you have st att or tmo? If tmo, I know its late but the tmo sim works without the need for carrier unlock.
Click to expand...
Click to collapse
Possible but I wanted to unlock anyway, it's just too simple not to do that.

Related

LG Intuition Root help needed

I have followed all the online post i can find ( jcase thread w/ android police page and adb install)
i have su file and lgroot.sh saved.
cant get adb working or figure out how to get it open or running or anything- on windows 7 nor xp -
I have team viewer on both and could really use some help, if anyone can...
im sure i can handle it once i know where to start. just really dead in the water here
please help me!
I am going to root an lg tomorrow so once I do it I'm happy to help.
Sent from my SCH-I535 using xda premium
Root?
Did you successfully root the LG INTUITION VS950?
tennisjunkie said:
I am going to root an lg tomorrow so once I do it I'm happy to help.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
LG Intuition root information
Hello to all, I receive my phone on monday, and im coming from a rooted/rom/oc'ed Samsung Infuse 4g, Xoom, SII, and countless cheap tablets all tweaked so I cant wait to get into the guts of this phone but first I need root. Im no dev or coder but definetly not a noob so hopefully somebody takes the file im gonna upload and see if it actually works. Searching by the Japanese name of Optimus Vu p895 I found a "one click'' root for the phone that im gonna post. They also claim to have the bootloader unlocked also to have a custom recovery like CWM but I havent found anything yet about that. I hope the dev's and rom guys get to this phone because to me it looks like the perfect pocket powerhouse imo.
THIS IS MEANT FOR DEV'S OR THE CURIOUS TO SEE IF IT WORKS. ANYTHING HAPPENS TO YOUR PHONE IS NOT MY FAULT.
This site was found by a simple google search, and the "super one-click" is meant for Android 2.3.5, hopefully one of you guys can make it work for 4.0.4 I dont get my phone til monday after thanksgiving so ill try it myself then.
the file is not uploading so the site is ninjaromeo . com /root-lg-optimus-vu-p895/
LG Intuition Root VIDEO Instruction
Performed a google search, with zero results found. Wondering if anyone has the ability to create a youtube step by step root instruction (for not so secure rooters), like myself. I have rooted four other devices but with each I had a video to refer too.
Thank You!
one4blackberry said:
Performed a google search, with zero results found. Wondering if anyone has the ability to create a youtube step by step root instruction (for not so secure rooters), like myself. I have rooted four other devices but with each I had a video to refer too.
Thank You!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1886460
No video, but this worked for me.
Thank You Iamdroidman. I just got my phone and rooted it in 10 min. Great link.
Sent from my VS950 4G using xda app-developers app
noezzi said:
Thank You Iamdroidman. I just got my phone and rooted it in 10 min. Great link.
Sent from my VS950 4G using xda app-developers app
Click to expand...
Click to collapse
Yeah, no worries. How much do you know about development? I am not new to rooting, but I was so excited about removing bloatware that I removed a little too much and now I'm probably going to have send mine in for warranty. Any chance you know how to pull a system .img so I could reflash mine??? lol
I'll PM you just in case you dont see this.
Yeah I heard that if you remove a certain "bloatware " app it activates another verizon lock app, and once the phone is turned off it locks the phone up. I completly removed all verizon apps and the "lockout" so hopefully i wont have the that problem.
But ive flashed many other devices but i dont know how to put up the system image. It cant be that difficult, im gonna google and youtube it to find out how. I believe there is another thread on xda with the lg intuition system image also. But ill try to get that to you tonight if possible. One quick question....once you have the image how are you gonna flash it?, i thought the bootloader was locked, or is there a program like odin for LG?
Sent from my VS950 4G using xda app-developers app
noezzi said:
Yeah I heard that if you remove a certain "bloatware " app it activates another verizon lock app, and once the phone is turned off it locks the phone up. I completly removed all verizon apps and the "lockout" so hopefully i wont have the that problem.
But ive flashed many other devices but i dont know how to put up the system image. It cant be that difficult, im gonna google and youtube it to find out how. I believe there is another thread on xda with the lg intuition system image also. But ill try to get that to you tonight if possible. One quick question....once you have the image how are you gonna flash it?, i thought the bootloader was locked, or is there a program like odin for LG?
Sent from my VS950 4G using xda app-developers app
Click to expand...
Click to collapse
Yeah, I'm luckily not locked out of the phone, but it would be nice to have a clean install. The boot loader is locked, and to my knowledge there is no Odin like program, but I was able to pull my .IMG a while ago. I'm hoping I can just push a clean .IMG, hard reset and call it good. I'll check when I get home to see if I can find how I did it.
Update: phone died...charged it up....turned on... received a security error. I deleted Verizon apps or something that triggered this. I returned the phone and within an hour rooted the new one without touching the Verizon apps.
This is not something new with LG phones I'm hearing. But if you go to developer options and turn on CPU stats it annoying to me that the phone is constantly sending messages to LG and Verizon servers and basically going ape**** in the background. So until the bootloader gets unlocked and a Rom is available I'm going with droidwall as a firewall and stock root. I wouldn't touch the Verizon apps or even quarantine IMO.
Sent from my VS950 4G using xda app-developers app
root problems
iamdroidman said:
Yeah, I'm luckily not locked out of the phone, but it would be nice to have a clean install. The boot loader is locked, and to my knowledge there is no Odin like program, but I was able to pull my .IMG a while ago. I'm hoping I can just push a clean .IMG, hard reset and call it good. I'll check when I get home to see if I can find how I did it.
Click to expand...
Click to collapse
I finally got mine done. Went with a one click option that I found on youtube. It truly was a one click (well actually two) and it immediately gave me root priv. At any rate, download Titanium and then "freeze" the bloatware that you don't want. This way also prevents them from hogging cache and RAM. But, it doesn't trigger the commie Verizon bootloader locks. As of yet, ODIN does not support this device, but gooManager does. Haven't tried to flash yet, but it's downloaded and just sitting there....I'm afraid to pull the trigger. I wish I could remember the link...I typed "how to root android 4.0.4" and it was like the third or fourth option. I tried and tried and tried JCase's method, but got caught in the shell because it wouldn't verify lgroot.sh file was in place. It was. Looking forward to developing. Im in IT in college as a non-trad so expect a lot of questions you guys.
noezzi said:
Yeah I heard that if you remove a certain "bloatware " app it activates another verizon lock app, and once the phone is turned off it locks the phone up. I completly removed all verizon apps and the "lockout" so hopefully i wont have the that problem.
But ive flashed many other devices but i dont know how to put up the system image. It cant be that difficult, im gonna google and youtube it to find out how. I believe there is another thread on xda with the lg intuition system image also. But ill try to get that to you tonight if possible. One quick question....once you have the image how are you gonna flash it?, i thought the bootloader was locked, or is there a program like odin for LG?
Sent from my VS950 4G using xda app-developers app
Click to expand...
Click to collapse
What is that lockout app? I'd like to do the same on my rooted vs950 just to ensure nothing I do bootloops it.
LG intuition Root 4.04 Help!
Can someone help me root my LG VS950 its been updated to 4.04 and I can't get it rooted using Bin4ry or Jcase suggestions so for... Others said it works with the 4.04 update, I just can't figure out what I may be doing wrong... when it gets to the reboot part and ask me to hit restore it starts and stops I about 5 seconds and nothing happens.. I added a pic of what it said when I tried to root using bin4ry method.. hopefully one of you can decipher this for me and help me find a solution...
P.S. and to be clear what USB connection type do I select (MTP, PTP, Internet Connection, or Charging) after I turn debugging mode on. and do I need to factory reset before I root?
Any other minor tid-bits would also be helpfull thanks..
Thanks in advance!
Here is how you fix it.
Power up the phone holding Power, Volume Up and Volume Down until Download Mode appears on the phone.
Connect the phone with the usb cable to the computer.
Use the LGMobile Support Tool and go to Customer Support -> Recovery Phone.
Follow the onscreen instructions from there.
This will download and reload your phone. Takes about 30 minutes total. All data will be lost.
Hopes this helps people.
jkbreazeale said:
Here is how you fix it.
Power up the phone holding Power, Volume Up and Volume Down until Download Mode appears on the phone.
Connect the phone with the usb cable to the computer.
Use the LGMobile Support Tool and go to Customer Support -> Recovery Phone.
Follow the onscreen instructions from there.
This will download and reload your phone. Takes about 30 minutes total. All data will be lost.
Hopes this helps people.
Click to expand...
Click to collapse
Does this have anything to do with rooting the phone? Your response was @ no one in particular so i wanted to be sure before followed your directions
This is when you root it and you delete bloatware that it doesnt like. When the phone restarts and it shows that there is a Security Error, Can not find morningcall meaning a soft brick. The method that I gave gets your phone back up and running. It does wipe the phone so be prepared.
It shows the device connected and then I get an error when it is checking the information. It validates the esn, cell phone number, then right before it errors out it says its looking for LG PC-sync software. All drivers are installed. Any ideas?
I successfully got mine rooted but Bricked on restart due to Vz security software. I posted Step by Step restore in case of brick.
Sent from my VS950 4G using xda app-developers app
This method just does not want to work for me......I chose all rooting options and it keeps saying it can't mount, and file does not exist. I will try to post a screen shot when I get home but it is very similar to Peter Bishop but I am not even getting the prompt to add busy box, it says "confirm backup", "confirm restore", and then reboots and says it is done....but Root Checker says the device is not rooted. I am trying this on V31 of the root program.
Here is what is hangs on:
Device type:
1) New Standard-Root <thx Ariel Berkman>
2) New Xperia Root by Goroh_jun <Xperia Z, XperiaV [JellyBean] ...>
3) Old
4) Old-Special <for example: Sony Tablet S, Medion Lifetab>
G) Google Glass Mode <thx Saurik for the ab file>
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your computer
Doing a back up first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue.....
Please select RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any key when restore is done.
Press any key to continue..
Going to reboot now....
mount: operation not permitted
642 kb/s <380532 bytes in0.578s>
1124 KB/s (1500495 bytes in 1.303s>
526 KB/s <1165484 bytes in 2.160s>
remote object '/system/bin/ric' does not exist
Going to copy files to it's place
mount: permission denied <are you root?>
Rebooting again, please wait!
Could not find C:users\blahblah\Root_with_Restore_by_Bin4ry\ric
Restoring previous backup! pleas select the restore my data option now on your device!
Now unlock your device and confirm the restore operation.
Please press any key when restore is done
press any key to continue...
Going to reboot last time now....
You can close all open command-prompts now!
after reboot all is done! Have fun!
Bin4ry
Press any key to continue...
so yeah....it does this for all options......

Trying to go back to Stock P769

as
surenzxx said:
I recently installed CyanogenMod with the Unlock Bootloader for noobs and I noticed the internal SD wasn't mounted. So I tried to flash an ICS ROM to see if it would work but it didn't. I was stuck at the boot screen. I tried restoring an ICS CWM backup and a JB backup but it didn't work. Currently, I have a flashed JB backup with a messed up touchscreen (because of the way I unlocked the boot-loader). It won't boot and I don't know how I can install the stock ROM. I really just want my phone to work at this point. I don't know if there's any way to use the offline method to flash a .kdz since I can't access android. I tried hard resetting, but when I do it starts up Clock Work Mod which I believe happens because of the way I unlocked boot-loader.
I'm trying to use this guide to fix it using SW upgrade. I did find a .bin and .fls which i'm downloading right now.
If anyone could help or give some advice that would be great. I really just want to use my phone, I don't care about flashing a custom ROM right now. As long as my phone works, I'll be happy.
Click to expand...
Click to collapse
Let me know if this works for you! Also you can do the offline fix just as long as you can get into S/W Upgrade mode. But I am curious to see if you can use the bin/fls files tool that you mentioned to get your phone working again.
as
surenzxx said:
Thanks for the reply! I'm planning on trying this method out tomorrow and ,if you don't mind, could you please elaborate on how I can do the offline fix with S/W Upgrade mode? I'll check back on the forum tomorrow!
Click to expand...
Click to collapse
Well just get your phone into S/W Upgrade mode and follow this tutorial. Getting into S/W Upgrade:
1. Get stock ROM here.
2. Turn off your phone
3. Press and hold the vol + button while inserting USB to computer
4. Keep holding the vol + until you see the S/W upgrade mode
5. Flash ROM with tutorial mentioned above.
Good Luck!
as
surenzxx said:
Isn't that just an infobank of all the KDZs? I'm pretty new, but can you flash a kdz with the offline method? To clarify, I was asking how to flash the kdz with the offline method in S/W upgrade mode. So ROMs/KDZs are essentially the same, right?
Edit: I read everything over again and realized what KDZs really are. I'm just wondering now if I could just hard reset in some other way because the LG Update Tool doesn't recognize my phone even though I see all the drivers. It's stuck at 15%.
Edit 2: I tried the method I suggested and it resulted with "Magic number does not concide".
So I'm stuck here with a phone that is stuck in bootloop, and has CWM installed. Can anyone help?
Click to expand...
Click to collapse
alright, this is all from memory but the offline flash didnt work as well for me when stuck in weird bootloops.
Step one-going back to online flash---->
A---
the easiest way i found was to go to C:/windows/system32/drivers/ect/hosts
right click>open with notepad
there should be two lines at the bottom
"127.0.0.1 csmg.lgmobile.com
127.0.0.1 csmgdl.lgmobile.com"
i would cut them out and paste them in a text doc in the same folder for reference later...
but either way you should remove them from the hosts file and save
B----
Make sure your small server is closed! once you minimize it it should go down to your status bar (shttps)
Step two-LGMS---->
make sure you have LG mobile support installed or install it.
open lg mobile support
install needed drivers for your phone
power your phone off/remove the battery
put battery back in
connect it to your computer holding down the volume up button
S/W UPDATE mode should pop up, if it doesn't preform and hardreset and try again til it works (it will)
then in the top right corner there should be a button or two click them both until you see
"restore update" or Update restore or something to that effect
select that
and let it ride man
i got my phone ****ed many times and just had to keep redoing this until it worked. if your bootloader is truely unlocked you can probably go through all that again and get CM10 working, i did but im still working through kinks.....
GOOD LUCK feel free to ask any more Q's about this process if you run into any problems
as
surenzxx said:
Hello! Sorry for the late reply. Before I start, do you mean LG Mobile Support form when I unlocked the boot-loader, if not could you provide a link to it? And by the way, when I tried hard resetting, the phone sent me back to CWM, any ideas why?
I was reading the CM10.2 notes yesterday and I realized there isn't supposed to be an internal SD card showing up when you plug in your phone to your PC. So I did tried fixing what wasn't broke.
Anyway, thanks for the info!
Click to expand...
Click to collapse
that could work, but i just downloaded the LG Mobile Support that i found from a google search. im pretty sure it was just from lg's website
GOOD LUCK
was your phone off before you hit the vol up and home, then clicked power for three-five seconds?
CROSSFREEZE said:
that could work, but i just downloaded the LG Mobile Support that i found from a google search. im pretty sure it was just from lg's website
GOOD LUCK
was your phone off before you hit the vol up and home, then clicked power for three-five seconds?
Click to expand...
Click to collapse
Such a late reply, sorry! I did nothing. Before you replied I flashed CM10.2 but never bothered to boot up my phone. Preparing to connect my phone to my comp, I couldn't start CWM so I figured " I'll just leave my phone plugged in for a few hours." Two hours later, my phone has a blank screen, i'm thinking "This shouldn't be blank? What the hell?." I pressed the power button and was greeted with Cid. I screamed out loud: "**** yeah!"
If people have the same problem as me all I did was: Reflash my my phone with 10.1, stock, 10.1 again, and then 10.2. I did that, only that.
What's funny is that I never checked to see if my phone was working after I flashed CM10.2. :silly:
Can't wait for Kit-Kat. Thank you for keeping up with my post, CROSSFREEZE I appreciate it!
Edit: I might submit a really specific and simplified version of the "Unlock Bootloader for Noobs P769" for the take of contributing.
surenzxx said:
Edit: I might submit a really specific and simplified version of the "Unlock Bootloader for Noobs P769" for the take of contributing.
Click to expand...
Click to collapse
love that idea, theres al;ot of reading i skimmed it and watched the video and after skippiing half the steps it worked for me but there was alot of messed up stuff to fix

[Q] "Waiting for device..."

This is al I get now, I've tried and tried to flash the boot.img after the rom getting this phone rooted is the most ridiculous thing I've evr done it's 3 in the morning I have work tomorrow and i just wanted to wireless tether so i can do some homework god damnit please help me out here
Clockwork mod is installed and i have "Tachyogen" but the boot will not install and the phone will not start. Sory if im talking in circles here but i dont know what else to say thank you good night
Aaustinnn said:
This is al I get now, I've tried and tried to flash the boot.img after the rom getting this phone rooted is the most ridiculous thing I've evr done it's 3 in the morning I have work tomorrow and i just wanted to wireless tether so i can do some homework god damnit please help me out here
Clockwork mod is installed and i have "Tachyogen" but the boot will not install and the phone will not start. Sory if im talking in circles here but i dont know what else to say thank you good night
Click to expand...
Click to collapse
Once you flash the ROM, you have to REBOOT into Hboot and start FastBoot, not Recovery, then use the Fastboot commands, Only Fastboot mode recognizes Fastboot commands, Recovery does not.
Fastboot commands only work in "Fastboot", to get to it disconnect the USB cable from the PC and/or phone, pull the battery and reinsert, press and hold Power+Vol Down until the Bootloader starts, use the volume keys to select Fastboot and press Power, connect USB cable again, issue Fastboot command.
solution
If you need reliable tether NOW, do multiple complete wipes of Everything,
then install the Carbon rom located here at xda in Rezound Original Android Development.
Will give you a rock solid phone with decent battery life too.
The Carbon installer should take care of your kernel install issues.
michaelbsheldon said:
If you need reliable tether NOW, do multiple complete wipes of Everything,
then install the Carbon rom located here at xda in Rezound Original Android Development.
Will give you a rock solid phone with decent battery life too.
Click to expand...
Click to collapse
No offense, that doesn't help his problem, he isn't flashing the kernel correctly. Tether works just fine on Tachyon also.
Solution
Hey, thanks for the responses.. I figured out what the problem is though, it was the drivers.. I was using fastboot already it just wouldn't recognize the phone after i installed the rom for some reason. So it's on now, but I can't get it "activated" with verizon? I try dialing *228 and it just tells me immediately that it failed. Anybody had this issue before? I was thinking maybe of going to stock, activating, and then switching back..
Aaustinnn said:
Hey, thanks for the responses.. I figured out what the problem is though, it was the drivers.. I was using fastboot already it just wouldn't recognize the phone after i installed the rom for some reason. So it's on now, but I can't get it "activated" with verizon? I try dialing *228 and it just tells me immediately that it failed. Anybody had this issue before? I was thinking maybe of going to stock, activating, and then switching back..
Click to expand...
Click to collapse
You never dial *228 on a 4G phone, it can mess up the SIM. It should just work when you boot it up.
mjones73 said:
You never dial *228 on a 4G phone, it can mess up the SIM. It should just work when you boot it up.
Click to expand...
Click to collapse
oh,
****
Aaustinnn said:
oh,
****
Click to expand...
Click to collapse
Is it a new activation or an already activated phone?
mjones73 said:
Is it a new activation or an already activated phone?
Click to expand...
Click to collapse
It has been activated before , but during the few days I've been without it I activated an old OG droid I still have laying around.. Not sure what to do to reactivate it now
Aaustinnn said:
It has been activated before , but during the few days I've been without it I activated an old OG droid I still have laying around.. Not sure what to do to reactivate it now
Click to expand...
Click to collapse
If you moved your number (and plan) to an OG Droid you changed it to a 3G plan, so to change it back to a 4G plan and reactivate the SIM, you have to call customer service and have you plan changed and your SIM reactivated.

Please, help me.

I'm interested in running a custom Rom on my mpcs LG f6 (ms500). I'm a part timer at this, my understanding of code is devastatingly deficient.
I have a an l9 and another f6 that won't even turn on and I'm wondering where, even, to begin.
All are mpcs.
All three, including the one I'm writing this on presently, were/are rooted.
An update took out the non-working f6, and the l9 was my bad.
I'm now on a rooted f6 running battery booster pro, overclocked with freedom kernal, with roehsoft ram expander doubling my ram to 1608.
I realize my circumstances are all over the place, but, if anyone has the genuine benevolence to help me where they can; my gratitude will be unquantifiable.
findrome said:
I'm interested in running a custom Rom on my mpcs LG f6 (ms500). I'm a part timer at this, my understanding of code is devastatingly deficient.
I have a an l9 and another f6 that won't even turn on and I'm wondering where, even, to begin.
All are mpcs.
All three, including the one I'm writing this on presently, were/are rooted.
An update took out the non-working f6, and the l9 was my bad.
I'm now on a rooted f6 running battery booster pro, overclocked with freedom kernal, with roehsoft ram expander doubling my ram to 1608.
I realize my circumstances are all over the place, but, if anyone has the genuine benevolence to help me where they can; my gratitude will be unquantifiable.
Click to expand...
Click to collapse
I'll give a shot at trying to help you with the L9 but I'm going to need some details about what happened. :/
Thank you AshIndigo
L9 rooted and running system tuner pro. I turned on the oem battery function, kernal, doo-hicky (highly technical terminology). The unit ceased recognizing the battery after reboot. It stated, at boot, to insert oem battery and will not take a charge.
I'm considering a wipe and a new bootlaoder with a custom Rom if possible, but I'll settle with just getting it working.
findrome said:
Thank you AshIndigo
L9 rooted and running system tuner pro. I turned on the oem battery function, kernal, doo-hicky (highly technical terminology). The unit ceased recognizing the battery after reboot. It stated, at boot, to insert oem battery and will not take a charge.
I'm considering a wipe and a new bootlaoder with a custom Rom if possible, but I'll settle with just getting it working.
Click to expand...
Click to collapse
Thats a new one. But what modes can you get into. S/W, fastboot, recovery, the wipe combination? If you can get into s/w mode just use the lg mobile tool and that should fix it. Otherwise we may need to reflash the phone. and is your bootloader unlocked?
It doesn't power up in the slightest. And it won't charge.
Bootloader was not unlocked, I'm still trying to wrap my skull jelly around that. I'm thinking flash might be the best option, but I'd prefer to preserve the data (not likely if flashed). I've downloaded LG flash tool, but the manual data entry is a mystery, excluding imei and serial.
findrome said:
Bootloader was not unlocked, I'm still trying to wrap my skull jelly around that. I'm thinking flash might be the best option, but I'd prefer to preserve the data (not likely if flashed). I've downloaded LG flash tool, but the manual data entry is a mystery, excluding imei and serial.
Click to expand...
Click to collapse
Alright I'm presuming s/w mode doesnt work but if it does then that would be nice. Next thing is to try fastboot. Here is a link to a fastboot for the l9
http://forum.xda-developers.com/showthread.php?t=2292828
If you manage to get into fastboot. We can reflash things. Truth to be told I dont know if we reflash we might have to wipe the device. :/
I've resolved myself to things being what they are.
What's s/w mode?
AshIndigo said:
Alright I'm presuming s/w mode doesnt work but if it does then that would be nice. Next thing is to try fastboot. Here is a link to a fastboot for the l9
http://forum.xda-developers.com/showthread.php?t=2292828
If you manage to get into fastboot. We can reflash things. Truth to be told I dont know if we reflash we might have to wipe the device. :/
Click to expand...
Click to collapse
Downloaded, followed instructions. Device booted once and quit while playing around with it, consistent with initial failure as I recall (if only vaguely), now on s/w update screen. Says please wait while upgrading.
Update:
Can enter s/w update. Now takes charge, will likely be 100% by the time you read this.
Lastly, can power on but powers off after entering screen unlock code.
Thank you again AshIndigo.
After some more dabbling, I've made it past the lock screen. The result is a message " please use genuine LG battery" before the unit shuts down and goes into what might might questionably be a bootloop. It's the system tuner pro app, set to start on start-up, that's the thorn in my side.
What are your orders captain?
findrome said:
After some more dabbling, I've made it past the lock screen. The result is a message " please use genuine LG battery" before the unit shuts down and goes into what might might questionably be a bootloop. It's the system tuner pro app, set to start on start-up, that's the thorn in my side.
What are your orders captain?
Click to expand...
Click to collapse
Sorry for replying late but if you have adb enabled we can uninstall the app easily. This should be the command to remove it.
adb uninstall ccc71.pmw.pro
AshIndigo said:
Sorry for replying late but if you have adb enabled we can uninstall the app easily. This should be the command to remove it.
adb uninstall ccc71.pmw.pro
Click to expand...
Click to collapse
No apologies needed, your time is greatly appreciated.
I ran the command, with what appears to be success. It seems though, the kernal remains intact.
A wipe seems imminent.
findrome said:
No apologies needed, your time is greatly appreciated.
I ran the command, with what appears to be success. It seems though, the kernal remains intact.
A wipe seems imminent.
Click to expand...
Click to collapse
(I just deleted everything I wrote and have to write it again )
Ok so before we try to re-flash the kernel. Lets just try the lg mobile support tool. If that doesn't work then heres instructions
1. If you have the p760 then heres the stock kernel
http://www.mediafire.com/download/87i322233ev36k8/stock-kernel.zip
3. Download it
4. extract the boot.img from the zips and put it into the "yours" folder in the fastboot folder
5. Get into fastboot
6. Make sure the device is connected by typing "fastboot devices"
(It should look like this) http://cdn.teamandroid.com/wp-content/uploads/2012/07/fastboot-devices-600x302.jpg
6a. Pray to Google
7. type "fastboot flash boot boot.img"
8. Pray again.
If you don't have the p760 then tell me which device you have so I can get the kernel
@ AshIndigo
P769BK
AshIndigo said:
(I just deleted everything I wrote and have to write it again )
6a. Pray to Google
8. Pray again.
If you don't have the p760 then tell me which device you have so I can get the kernel
Click to expand...
Click to collapse
Golden, you missed your calling.
It's a P769(bk). Not that the color makes a difference. It's also a T-mo, not mpcs. If that matters.
findrome said:
Golden, you missed your calling.
It's a P769(bk). Not that the color makes a difference. It's also a T-mo, not mpcs. If that matters.
Click to expand...
Click to collapse
I dont think I've missed it yet
Alright so there are 2 options right now.
1. You resign the kernel or wait for me to get on a windows computer so I can resign it.
2. You unlock your bootloader.
If you choose option 1 then and you want to try then here's the link.
http://forum.xda-developers.com/optimus-l9/general/guide-install-custom-roms-locked-t3249828
And here's the link to the kernel
http://d-h.st/pdM
1. Follow the manual instructions in the post except just do it for the boot.img and flash that instead.
"fastboot flash boot boot_bumped.img"
If you choose option 2 then here's a link with instructions. (My phone is perma-locked so I never got to try this)
http://forum.xda-developers.com/showthread.php?t=2601480 (Wish you luck if you try this)
If anything is unclear let me know.

Moto Z stuck on Bootlader (NPL26-118-20)

Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
arnavde said:
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
Click to expand...
Click to collapse
If you have an SD Card installed, try removing the SD card and then booting the phone.
If that works... then I bet you have a Samsung 128GB MicroSD card???? (if not, maybe another brand 128GB card?)
It seems that there is something in the 7.1.1 boot sequence for the Moto Z's that is hanging during the mount of the SD Card when it is a Samsung 128GB card. Removal of the SD allows a successful boot up.
Once boot up is complete, you should be able to insert the SD card (without rebooting the phone) and the phone will see the SD card and the "missing SD" notification will go away and the phone will function as it always has. It seems that unless Motorola/Lenovo release a patch for this issue, that your only options are 1) remove SD during every reboot, or 2) purchase a different SD card (Motorola seems to recommend SanDisk).
No there is no SD card. The phone is stuck on bootloader.
I had the same issue, stuck on bootloader and error saying recovery could not be read. I rebooted a few times and it eventually went away. Problem is that now my phone acts REALLY weird. And the Software Assistant does NOTHING to help out. It doesn't detect the phone in regular mode and in fastboot, it says everything is fine and doesn't let me restore.
I have a feeling the OTA had a problem installing and a clean slate is the only way to fix it. The only issue is that I can't find a copy of an XT1560-02 ROM anywhere, only other variants.
I had the same issue after update. Recovery could not be validated. I removed the SD card and boom perfect boot. I just hope the issue gets patched soon, would hate to have to carry that Lil key around for if I need a reboot to remove SD card before boot
Same issue. But instead of removing sd card. Just go into recovery mode and wipe cache.
Works
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
I did id, but not luck
maumarti2k said:
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
Click to expand...
Click to collapse
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
acalapone said:
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
Click to expand...
Click to collapse
Maybe you could provide more information. Have you been on Stock 7.1.1 and tried to unlock your bootloader without allowing Oem Unlocking in developer options? What is the current state of your device, means are you able to get into recovery mode?
7.1.1 Original Stock - Not Allowed OEM Unlocking
Everything was great, but a week ago the cellphone it restarted itself, and never back: It's stuck in bootloop.
I get it with Android 6.0, and i was upgrading via Ota until 1th July, which that means it's 7.1.1 Rom Stock
Cause i wanted have my cellphone pure, i didnt touch anything(I didn't want loose my warranty), so i'm never check to allow "oem unlocking"
Now, warranty doesn't help me because i bought it in Italia, and im living in Argentina now, and they said taht they have Local Warranty.
So, i tried to solved it by my self... I did it with my old phones but they were cheap, so i think is it that why i never have ear about Reset Software Factory Protection.
Brief:
Original Stock 7.1.1
Yes, i tried unlock BL without Allow OEM Unlocking
Yes, i can get in BootLoader and in fastboot without problem
Thank You very much
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume up) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
I did it.
bullfinch110 said:
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume down) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
Click to expand...
Click to collapse
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
acalapone said:
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
Click to expand...
Click to collapse
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
bullfinch110 said:
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
Click to expand...
Click to collapse
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
acalapone said:
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
Click to expand...
Click to collapse
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
@acalapone i have edited my post above
bullfinch110 said:
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
Click to expand...
Click to collapse
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
acalapone said:
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
Click to expand...
Click to collapse
You cannot go back to 6.x after updating the bootloader to 7.x
lollyjay said:
You cannot go back to 6.x after updating the bootloader to 7.x
Click to expand...
Click to collapse
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
acalapone said:
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
Click to expand...
Click to collapse
There is still no RETEU 7.0 available, thats why you have to flash the RETBR.
Try again to flash the RETBR NPL25..firmware with RSD. If you'll get the same failed error message, here is
PLAN B:
Copy the flashall.xml file and rename it to flashallcopy.xml.
Open the copied file with a text editor and delete the 2 lines with "gpt" and "bootloader" in it. Save it and close the copy. With this the RSD program will skip those two commands. Click the 3 dots and add the flashallcopy.xml file to RSD. Click Start.
If that doesn't work, we have to run Plan C
Good luck

Categories

Resources