Hey everyone,
first let me thank you for this forum, especially thanks to all the developers. I've been using ROMs, apps and information from this site for ages!
I'm using a SGS2 with Chameleon 3.0.3 and its kernel. For work (I'm a teacher) I need the ability to plug the phone to a beamer with my MHL adapter. That's why I'm using Chameleon since it is built on stock. Everything is working fine so far.
However, I'd really like to go back to CM, I've used it for all my previous phones and really loved it. Is there any way I can use CM10.1 but keep a stock kernel? I've already tried using PhilZ kernel with CM, but the MHL adapter didn't work.
Has anyone managed to get the MHL port working on any CM version?
Would be great if anyone could help. Thanks in advance!
m4zzic said:
Hey everyone,
first let me thank you for this forum, especially thanks to all the developers. I've been using ROMs, apps and information from this site for ages!
I'm using a SGS2 with Chameleon 3.0.3 and its kernel. For work (I'm a teacher) I need the ability to plug the phone to a beamer with my MHL adapter. That's why I'm using Chameleon since it is built on stock. Everything is working fine so far.
However, I'd really like to go back to CM, I've used it for all my previous phones and really loved it. Is there any way I can use CM10.1 but keep a stock kernel? I've already tried using PhilZ kernel with CM, but the MHL adapter didn't work.
Has anyone managed to get the MHL port working on any CM version?
Would be great if anyone could help. Thanks in advance!
Click to expand...
Click to collapse
MHL is not working on CM,nor on any AOKP,AOSP based ROM.The sources of Samsung are closed,so nobody can port it to other ROMs.But here is a tip.Look at my signature.I'm using JellyBam ROM and Chameleon ROM at the same time with Dual Booting via Dori kernel.I use Chameleon only for MHL,and it's working.And BTW,kernel has nothing to do with the MHL.
GamingDj said:
MHL is not working on CM,nor on any AOKP,AOSP based ROM.The sources of Samsung are closed,so nobody can port it to other ROMs.But here is a tip.Look at my signature.I'm using JellyBam ROM and Chameleon ROM at the same time with Dual Booting via Dori kernel.I use Chameleon only for MHL,and it's working.And BTW,kernel has nothing to do with the MHL.
Click to expand...
Click to collapse
Thanks for your answer! Sounds like a good idea. I've never used dualboot before, but I'll give it a try.
Do both ROMs share personal stuff? Or do you just turn off sync in one of them? I think I don't want to install two ROMs with all the apps and settings. Just a plain Chameleon would be enough for using it with MHL once in a while.
m4zzic said:
Thanks for your answer! Sounds like a good idea. I've never used dualboot before, but I'll give it a try.
Do both ROMs share personal stuff? Or do you just turn off sync in one of them? I think I don't want to install two ROMs with all the apps and settings. Just a plain Chameleon would be enough for using it with MHL once in a while.
Click to expand...
Click to collapse
No,they don't share the apps nor the documents.I use Chameleon ROM only for games(I have instll NFS,GTA,Asphalt,Cut the Rope,etc),and MHL,because I sometimes want to put a video on TV,and share it with my friends.And I use JellyBam.This is my main ROM.Here I have the docs,and stuff like that.But I warn you! The second ROM is 2 GBs in size,without any apps installed.Just watch your space.
Related
Is there some ROM whit MHL support for Galaxy S2 i9100? I just purchased a MHL adapter and i can not make it works. Thanks
Dude this topic belongs to Q&A.
All stock (original samsung) and stock based roms have MHL support. It doesn't work on AOSP/CM9/AOKP roms. (RR - phone screen can be displayed but it freezes immediately).
I bought a cheap one and I couldn't make it work. Once I got my money refund I purchased the original one and voila!
1) Plug hdmi cable to mhl adapler
2) Plug charger/usb cable to mhil adapter and next to the power outlet/computer
3) Connect adapter to micro usb port of your phone
4) Setup your digital TV.
5) Optional. Sometimes you may have to reboot your device.
All ROMs that are based on Samsung support MHL
AlAneed said:
All ROMs that are based on Samsung support MHL
Click to expand...
Click to collapse
AHA!! Thas the problem... I´m Using Resurrection Remix 3.0.1. Cant you recomend me a Stock Rom? Thanks!!!
cachibyte said:
AHA!! Thas the problem... I´m Using Resurrection Remix 3.0.1. Cant you recomend me a Stock Rom? Thanks!!!
Click to expand...
Click to collapse
WanamLite. Definately one of the best stock roms.
Sent from my GT-I9100
boki9999 said:
WanamLite. Definately one of the best stock roms.
Click to expand...
Click to collapse
What's the purpose of a stock-based rom? Is it customized in some ways? Or is it pretty much the original stock rom minus bloatware??
fgoyti said:
What's the purpose of a stock-based rom? Is it customized in some ways? Or is it pretty much the original stock rom minus bloatware??
Click to expand...
Click to collapse
You answered your own question, also it will contain tweaks and modification optional as a separate flash file.
By the way OP I recommend Neat Rom Lite v4.0 its leaked JB based.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Do any of the ROMs support 5.1 surround out from the MHL?
All I get is 2 channel sound...
I'm using neat rom lite jelly bean leak
http://forum.xda-developers.com/showthread.php?t=1569686 great rom and there is this option in the settings
This is one of the best stock-based ROM: http://forum.xda-developers.com/showthread.php?t=1847600
MHL supported.
Hey guys! so I just updated my build 4 to build 5 I'm fixing up this phone for my girl and she fell in love with the looks of it.
Now my problem is that I"m trying to get BLN to work! but it says my kernel does not support it. I'm confused as the creator of this rom says he is using CM kernel (i take that's cynogenmod kernel? which does support it or well it did back in cm9 on my t-mo s2). Did I misunderstand this?
At any rate can some one tell me what kernel to install to make bln work? most of the ones I found on this website say they work for aokp aosp and cm9/cm10 but none for SuperNexus.
thank you for your time! and pardon the grammar.
i, too am looking for the answer... so far nothing
vanadragos said:
i, too am looking for the answer... so far nothing
Click to expand...
Click to collapse
Yea I mean the notes say the kernel is based on CM, and I'm afraid to install a different kernel and have the phone brick on me.
Guys, as title says, i'm trying to add otg support in kernel, please flash and use some otg device and confirm whether it works or not.
Dont have time to add proper content, so just note some points:
1. Its for ICS ROMS
2. It might not work
3. Please test with cable and USB Host Diagnostic app from Play Store
4. It might not work
Its built on my neXusKernelv1 so expect the performance and other features to stay intact.
DOWNLOAD:
See attachment.
Regards
Yasir
Asking a small question, do I need external power source? (Just like sensation??)
Not working for me. rom: SkyDragon
megacrash said:
Not working for me. rom: SkyDragon
Click to expand...
Click to collapse
ok, then 2 suggessions,
1. Try with Stock rom.
2. Try using external power source.
I'll try another build tonight. Maybe we need to add something to build.prop and ramdisk also. I'll workk on it.
1. Also not working on stock rom.
2. I don't have usb hub with power source. Or do you mean something else?
topjohnwu said:
Asking a small question, do I need external power source? (Just like sensation??)
Click to expand...
Click to collapse
megacrash said:
1. Also not working on stock rom.
2. I don't have usb hub with power source. Or do you mean something else?
Click to expand...
Click to collapse
I am refering to what the guy above you said.
Actually, the things is, i dont have OTG cable, and i have never used it either. I saw in kernel config that it is configurable, so i want to enable it for those who want it. For that, i will need a dedicated tester to test each release that i make. I will modify some build.prop entries tonight to make it work. Any one willing to spare time for above mentioned thing, please PM me.
Regards
Yasir
Guys, Try this app and give me its reports.
http://forum.xda-developers.com/showthread.php?t=1802740
It said that i have not support for storage...(i don't know how it looks in original, because I use russian lang. ) I guess, it's mean that kernel does still not provide OTG. на конце палкиBy the way, Sense.Revolution+R1 JB thinks that it phone is on charging when i connecting OTG cable without USB device on the end. Maybe it helps somehow... =))
2 Questions:
What the hell mean otg ?
and why for ics ? i guess now many users use jb.
mefistoreyon said:
2 Questions:
What the hell mean otg ?
and why for ics ? i guess now many users use jb.
Click to expand...
Click to collapse
Usb otg= usb on-the-go. It means that you may connect usb devices(mouse, keyboard, usb flash memory, hard disk etc) to your phone. So you can control your phone using mouse and keyboard, and browse files and folders in your usb memory.
mefistoreyon said:
2 Questions:
What the hell mean otg ?
and why for ics ? i guess now many users use jb.
Click to expand...
Click to collapse
Search it.
Flowed from my HTC branded muffin...
OTG might be a bit more tricky. Im researching on it a bit more.
Anyways, otg or no otg, this thread can be continuation of my neXusKernel. I will be basing future builds on v1 becoz v2 and v3 generally got bad reviews.
Atis112 made some updates on the clock rates of ICS kernel so i will release a build in a few hours.
Upcoming:
neXusKernel-v4
Regards
Yasir
neXus PRIME said:
OTG might be a bit more tricky. Im researching on it a bit more.
Anyways, otg or no otg, this thread can be continuation of my neXusKernel. I will be basing future builds on v1 becoz v2 and v3 generally got bad reviews.
Atis112 made some updates on the clock rates of ICS kernel so i will release a build in a few hours.
Upcoming:
neXusKernel-v4
Regards
Yasir
Click to expand...
Click to collapse
Wise decision to base it on v1.
I've tried it all. Came back to v1.
Its rock solid mate.
Eagerly awaiting your next release.
Regards,
navmad
neXus PRIME said:
OTG might be a bit more tricky. Im researching on it a bit more.
Anyways, otg or no otg, this thread can be continuation of my neXusKernel. I will be basing future builds on v1 becoz v2 and v3 generally got bad reviews.
Atis112 made some updates on the clock rates of ICS kernel so i will release a build in a few hours.
Upcoming:
neXusKernel-v4
Regards
Yasir
Click to expand...
Click to collapse
I hope you get JB OTA soon to start developing for it. Btw I'm testing JB for you .
Tilapia running on
AOKP PUB Tilapia
Motley 249
Something is messed up big time in his commits OR, i think he hasnt finished what he started, so its not building completely. Now back on researching for OTG. or any other thing that i can add.
Feature requests are welcome, but you'll have to help me find stuff.
Regards
neXus PRIME said:
Something is messed up big time in his commits OR, i think he hasnt finished what he started, so its not building completely. Now back on researching for OTG. or any other thing that i can add.
Feature requests are welcome, but you'll have to help me find stuff.
Regards
Click to expand...
Click to collapse
Yes,i didn't finish it because i stopped all ics projects when jb was here, and im waiting for jb kernel sources now.
does not work for me too
I am on skydragon 2.2
I used an adapter, not sure if it can work that way
will give it a try with a different ROM later today
If i take a look at the Snapdragon specs here:
http://www.qualcomm.com/sites/default/files/common/products-services/snapdragon_specs_9-12.pdf
then i see that the S4 pro/plus specifically include OTG support.
On the other hand, our S4 play indicates 'USB 2.0 HS Peripheral or Host'.
This seems to indicate that it does not support the OTG protocol (which includes a little bit more than just working as usb-host, like automatically figuring out which role to use).
But it also seems that it should be able to work as a USB host. The question remains whether you can select this mode via the kernel or that it is hardwired in the circuitry.
OTG works fine on DX with JB rom. It's mean, that DX is able to support USB-host. May be just need JB sources for porting this feature on ISC?
megacrash said:
OTG works fine on DX with JB rom. It's mean, that DX is able to support USB-host. May be just need JB sources for porting this feature on ISC?
Click to expand...
Click to collapse
I think we never will get the JB sources -.-, but maybe we can port it later. Now i s*ck with HW v-sync support. If i can include it to ics kernel sources, people will be able to use official JB with all hboot, and without /system write protection. If it's ready, i will check otg support too
Hi,
I'm using X-TremE JB ROM V.9, but i have problem whit MHL, it's don't work.
Phone seems to recognize cable but no picture on tv.
MHL is working fine on original Samsung rom
Can You help me ?
Regards
Obviously its an issue with the ROM. So please contact the devs of that ROM.
i can't do it ;/
because i have less than 10 post...
n0lab said:
Hi,
I'm using X-TremE JB ROM V.9, but i have problem whit MHL, it's don't work.
Phone seems to recognize cable but no picture on tv.
MHL is working fine on original Samsung rom
Can You help me ?
Regards
Click to expand...
Click to collapse
Yeah,so here is the deal: THE DEVELOPER LIED! He said fake things.You aren't the only one for who it doesn't work.This is a post I wrote back in May(attachment)...looks like other people have issues,too...
immortalneo said:
Obviously its an issue with the ROM. So please contact the devs of that ROM.
Click to expand...
Click to collapse
No,only fake info :/ ...that's why I don't use his ROM
I have CyanogenMod 10.2.0, and I'm very happy whit it, but one of its little issues is it doesn't support HDMI output whit the adapter.
So, using the dual boot option in googy max kernel, I want to flash a rom (and has to be android 4.1.2), essencially just for that. Some time ago I flash the Omega rom, but couldn't make the camera work, despite of the app I used.
Which custom rom is the simpliest (is that a word?? ), smooth, stable and -camera fully functional- ?? I'm sure there's a lot, and don't want to start an eternal debate, just a short list, please
Thanks in advance.
Edit: just realiced this goes in Galaxy SIII Q&A forum, sorry for that, how can I move it?
Zordak7 said:
I have CyanogenMod 10.2.0, and I'm very happy whit it, but one of its little issues is it doesn't support HDMI output whit the adapter.
So, using the dual boot option in googy max kernel, I want to flash a rom (and has to be android 4.1.2), essencially just for that. Some time ago I flash the Omega rom, but couldn't make the camera work, despite of the app I used.
Which custom rom is the simpliest (is that a word?? ), smooth, stable and -camera fully functional- ?? I'm sure there's a lot, and don't want to start an eternal debate, just a short list, please
Thanks in advance.
Edit: just realiced this goes in Galaxy SIII Q&A forum, sorry for that, how can I move it?
Click to expand...
Click to collapse
Try Blekota rom with S5 look. Install Boeffla Beta 3 kernel too .. Or install clean QS Port. With boeffla kernel.
shephart said:
Try Blekota rom with S5 look. Install Boeffla Beta 3 kernel too .. Or install clean QS Port. With boeffla kernel.
Click to expand...
Click to collapse
Finally I chose the Gorgoid v 2.7a ROM.
Camera didn't work, again
Beoffla kernel support dual boot?
Thanks!
Zordak7 said:
I have CyanogenMod 10.2.0, and I'm very happy whit it, but one of its little issues is it doesn't support HDMI output whit the adapter.
So, using the dual boot option in googy max kernel, I want to flash a rom (and has to be android 4.1.2), essencially just for that. Some time ago I flash the Omega rom, but couldn't make the camera work, despite of the app I used.
Which custom rom is the simpliest (is that a word?? ), smooth, stable and -camera fully functional- ?? I'm sure there's a lot, and don't want to start an eternal debate, just a short list, please
Thanks in advance.
Edit: just realiced this goes in Galaxy SIII Q&A forum, sorry for that, how can I move it?
Click to expand...
Click to collapse
Did you tried Neat rom or ArchiDroid, these are the best stock based roms out there
Sent from my GT-I9300 powered by ArchiDroid+ArchiKernel
gabyif said:
Did you tried Neat rom or ArchiDroid, these are the best stock based roms out there
Sent from my GT-I9300 powered by ArchiDroid+ArchiKernel
Click to expand...
Click to collapse
Ok, I haven't tried those, I'll give them a try
Thanks!
But I am tempted to believe it's a kernel issue. anyone know if that could be the problem?